Expanding your creativity Product Catalogue - Interfit
Expanding your creativity Product Catalogue - Interfit Expanding your creativity Product Catalogue - Interfit
Image supplied courtesy of Matt Darlington • www.mattdarlingtonphotos.co.uk Expanding your creativity Product Catalogue Studio lighting and accessories for strobes and speedlites
- Page 2 and 3: 2 Expanding your creativity Since I
- Page 4 and 5: 4 TungsTen The EZ-Lite is an afford
- Page 6 and 7: 6 sTellaR X solaR-lITe The Solar-Li
- Page 8 and 9: 8 Cool-lITe INT103|Lamp No. INT034
- Page 10 and 11: 10 INT213|Single head Super Cool-Li
- Page 12 and 13: 12 FLUORESCENT RINg LITE 3 INT339|F
- Page 14 and 15: The Monstar 3 is an affordable solu
- Page 16 and 17: 16 Multi voltage power pack Include
- Page 18 and 19: 18 EX150MKIII MKIII The EX150MkIII
- Page 20 and 21: 20 EXD200 The EXD200 is lightweight
- Page 22 and 23: EX400 Ti The EX400 Ti is the latest
- Page 24 and 25: 24 EX FITTINg ACCESSORIES INT484|EX
- Page 26 and 27: Using the battery pack with the spe
- Page 28 and 29: LIgHTINg STANDS 28 Accessories •
- Page 30 and 31: wIRELESS CAMERA RELEASE TRIggERS nI
- Page 32 and 33: Image supplied courtesy of Matt Dar
- Page 34 and 35: 5in1 REFLECTOR KIT wITH ARM & STAND
- Page 36 and 37: 36 5in1 REFLECTORS Probably the mos
- Page 38 and 39: 38 PROSoftboxes A range of fifteen
- Page 40 and 41: LIgHT TENTS LIgHT TENT FOLDINg PHOT
- Page 42: BACKgROUND SUPPORT SYSTEMS Designed
- Page 45 and 46: Strobies are based around a Flex Mo
- Page 47 and 48: INT334|Strobies Strobies XL Softbox
- Page 49 and 50: BEAUTY DISH AND ACCESSORIES The sta
- Page 51 and 52: MACRO RINg LIgHT The Macro Ring lit
Image supplied courtesy of Matt Darlington • www.mattdarlingtonphotos.co.uk<br />
<strong>Expanding</strong> <strong>your</strong> <strong>creativity</strong><br />
<strong>Product</strong> <strong>Catalogue</strong><br />
Studio lighting and accessories for strobes and speedlites
2<br />
<strong>Expanding</strong> <strong>your</strong> <strong>creativity</strong><br />
Since <strong>Interfit</strong> was founded it has always had the passion to become a market<br />
leader in its chosen sector. Today, as a leading manufacturer of Innovative<br />
products products in the the Studio Lighting and Speedlite Accessories, <strong>Interfit</strong> continues to<br />
set new bench marks for our competitors.<br />
New products in both our traditional ranges ranges and and the Strobies brand, offer<br />
groundbreaking products and ideas to expand <strong>your</strong> <strong>creativity</strong>.<br />
New <strong>Product</strong>s<br />
• 3 Head Head EZ-Lite kit.<br />
• Super Cool-Lite 9 MkII.<br />
• Fluorescent Lite Ring.<br />
• Taking the ever popular EX150 to the next level with the MkIII.<br />
• EX TI 400 groundbreaking Radio Control with innovative control from<br />
the camera position.<br />
• A range of LED Panels for DSLR’s and Video users.<br />
• Two new Studio Tables, including a Portable Table for home or office with<br />
LED lighting.<br />
Strobies<br />
• Rapida 8 and Rapida Stripbox fast and easy to operate Softboxes.<br />
• Modi-Lite a revolution in Hotshoe Flashgun accessories.<br />
• A range of new Clamps to hold Cameras and Speedlites.<br />
• Boom Arm.<br />
• Macro LED Flash Ring.<br />
<strong>Product</strong> Contents<br />
Page Description<br />
TungsTen and Halogen lIgHTIng<br />
3 SXT3200<br />
4 EZ-Lite<br />
5 Stellar X500<br />
Stellar X750<br />
6 Stellar X Solar-Lite<br />
FluoResCenT lIgHTIng<br />
7 EZ-Flo<br />
8 Cool-Lite<br />
Super Cool-Lite 4<br />
9 Super Cool-Lite 455<br />
Super Cool-Lite 5<br />
10 Super Cool-Lite 6<br />
11 Super Cool-Lite 655<br />
Super Cool-Lite 9 MkII<br />
12 FR3 Fluorescent Ring Lite 3<br />
13 Kooltubz 4<br />
Kooltubz 6<br />
14 Monstar<br />
Contents<br />
Page Description<br />
led dslR and VIdeo lIgHTIng<br />
15 Matinee LED 256/Articulated Arm<br />
16 Matinee LED 320<br />
Matinee LED 1000<br />
FlasH lIgHTIng<br />
17 The EX Family<br />
18 EX150 MkIII<br />
20 EXD200<br />
21 EX300<br />
EXD400<br />
22 EX400 Ti<br />
24 EX Fitting Accessories<br />
25 EX Optional Accessories<br />
26 Stellar Xtreme<br />
27 ‘S’ Type Accessories<br />
Light Shaping Tools<br />
28 Light Stands<br />
29 Kit Bags<br />
30 Wireless Camera Release Triggers<br />
Studio Flash Triggers<br />
31 Strobies Flash Triggers<br />
Strobies SpeedLite Triggers<br />
Sync Leads<br />
EX150 MkIII<br />
Page Description<br />
EX Ti 400<br />
32 Umbrellas<br />
34 Reflectors Accessories<br />
37 Backgrounds<br />
38 <strong>Interfit</strong> Pro Softboxes<br />
40 Light Pods & Tents<br />
41 Studio Table<br />
42 Background Support Systems<br />
sTRoBIes sPeedlITe aCCessoRIes<br />
44 STR100 Portrait Kit<br />
45 Flex Mount<br />
46 STR101 EFX Kit<br />
47 XL Softbox<br />
Portabox<br />
50 Rapida Softboxes<br />
51 Macro Ring Light<br />
52 XS Bracket<br />
53 Accessories<br />
54 Accessories<br />
55 Accessories
The SXT3200 is available in two highly specified kits, both with a new Educational DVD especially commissioned to<br />
show just how easy Tungsten Lighting can be for first time or advanced users. The DVD is feature packed for both<br />
<strong>Product</strong> and Portrait Photography.<br />
It also includes many professional tips on getting the best results from the system and setting up <strong>your</strong> camera. The<br />
two head SXT3200 Kit includes an all-in-one Carry Case for storage and transportation along with 2 Air-Cushioned<br />
Lighting Stands, 2 SXT3200 Heads, 2 Umbrellas and Power Cables.<br />
In addition to the two head kit, the three head kit includes a newly developed<br />
Background Cloth and Hook Support System. It also includes a 3rd SXT3200<br />
Head and Lighting Stand to provide the background illumination.<br />
INT114|Single Head<br />
INT114|2 Head Kit INT115|3 Head Kit<br />
The SXT3200 benefits from an extensive range of accessories via the ‘S’ type bayonet fittings allowing most of<br />
the the <strong>Interfit</strong> Stellar X creative light shaping shaping tools to be used. used.<br />
Educational Training<br />
Included<br />
INT114|2 Head Kit|Lamp No INT032<br />
2 x SXT3200 Heads<br />
2 x Umbrellas<br />
2 x Lighting Stands<br />
2 x Power Cables<br />
1 x Re-enforced Storage/Transport Bag<br />
INT115|3 Head Kit|Lamp No INT032<br />
3 x SXT3200 Heads<br />
2 x Umbrellas<br />
3 x Lighting Stands<br />
1 x Large Grey Background Cloth<br />
1 x Easy to use Hook Support System<br />
1 x Re-enforced Storage/Transport Bag<br />
SXT 3200 • Continuous 3
4<br />
TungsTen<br />
The EZ-Lite is an affordable solution to modern studio lighting, having a<br />
uniform 3200k Tungsten light source enables the photographer to capture<br />
excellent results, proven in many studios all over the world.<br />
Using an established Lamp the EZ-Lite provides 500 watts of light,<br />
ideal for Portraits and <strong>Product</strong> Photography.<br />
INT 123|EZ-Lite EZ-Lite 3 Head Kit<br />
Supplied complete with<br />
3 x EZ-Lite Heads<br />
3 x 500 watt Lamps (INT032)<br />
3 x Lighting Stands<br />
3 x Translucent Umbrellas<br />
3 x Power Leads<br />
Each kit comes complete with EZ-Lite Heads, Lighting Stands, Translucent<br />
Umbrellas, Power Cables and Lamps. Ideal for Students and first time users.<br />
The EZ-Lite will provide a soft even light source for Photographic<br />
or Video Applications.<br />
The twin or three Umbrellas Umbrellas offer a simple yet yet effective light source from<br />
the the tried and tested 500 watt Lamp, Lamp, (INT032) even first time users to studio studio<br />
lighting lighting will find either kit a remarkable simple kit to set up and use in a<br />
very short time, enabling you to be creative with <strong>your</strong> lighting.<br />
Continuous • EZ-Lite<br />
INT160|EZ-Lite 2 Head Kit<br />
Supplied complete with<br />
2 x EZ-Lite Heads<br />
2 x 500 watt Lamps (INT032)<br />
2 x Lighting Stands<br />
2 x Translucent Umbrellas<br />
2 x Power Leads
sTellaR X750<br />
The Stellar X750 watt has been added<br />
to the range due to customer feedback.<br />
Offering more power than traditional 500<br />
watt Tungsten units. The 750 watt meets<br />
with the demands of Professional Studio<br />
based Photographers.<br />
It can also be used at 250 watts or 500 watts<br />
simply by flicking a switch on the back<br />
panel. The Lamps are colour balanced to<br />
3200k enabling them to be used with many<br />
other <strong>Interfit</strong> products compatible with<br />
Tungsten or Halogen Lighting.<br />
INT155|Single Head|Lamp No. 3 x INT500<br />
Stellar 750 KITS<br />
INT156|Single Head, Umbrella & Stand Kit*<br />
INT157|Twin Translucent Umbrella Kit<br />
INT158|Twin Spill Kill Reflector Kit<br />
* Bag not included<br />
sTellaR X500<br />
The Stellar X500 watt lamps are colour balanced to<br />
3200k enabling them to be<br />
used with many other <strong>Interfit</strong><br />
products such as SXT3200 or<br />
Halogen lighting.<br />
The Stellar Tungsten units feature ‘S’<br />
type bayonet fittings enabling the use of<br />
Stellar light shaping accessories such as<br />
Softboxes or a Beauty Dish for Creative<br />
Portraits and Fashion Images.<br />
Stellar 500 KITS<br />
INT184|Single Head|Lamp No. INT032<br />
INT185|Single Head, Softbox & Stand Kit*<br />
INT186|Twin Umbrella Kit<br />
INT187|Umbrella Softbox Kit<br />
INT188|Double Softbox Kit<br />
* Bag not included<br />
Stellar X500 • Stellar X750 • Continuous 5
6<br />
sTellaR X solaR-lITe<br />
The Solar-Lite is primarily designed for use in Video<br />
Photography due to its noiseless operation but can also<br />
be used for ‘Still’ Photography. Fitted with an <strong>Interfit</strong> Pro<br />
Softbox, to give a very soft working light. The aluminium<br />
extruded body shell is designed to stand up to the most<br />
vigorous use.<br />
INT194|Single Head<br />
Lamp No. INT329 (1000 watt) Supplied<br />
Lamp No. INT328 (500 watt)<br />
All Solarlite kits use the <strong>Interfit</strong> Pro range of Heat Resistant softboxes<br />
which can withstand heat up to 400ºc or 752ºf. Each Softbox is<br />
manufactured from high grade materials and feature an even edge to<br />
edge distribution of light and a maximum light loss of just 1.2 f-stops<br />
is achieved. Each Kit comes with an all in one Kit Bag.<br />
INT195|Twin Softbox 60 x 60cm (24 x 24”)<br />
INT196|Twin Softbox 100 x 100cm (39 x 39”)<br />
INT197|Twin Softbox 100 x 140cm (39 x 55”)<br />
INT198|Twin Softbox 30 x 90cm (12 x 35”) 100 x 100cm (39 x 39”)<br />
Continuous • Stellar X Solar-Lite
EASY TO ASSEMBLE<br />
The Ez-Flo is the answer, with its energy efficient Fluorescent Lamps which<br />
are near daylight balanced, will enable you to create great images. It is easy<br />
to assemble in three easy steps.<br />
1. Push up the Softbox.<br />
2. Attach the Lamps.<br />
3. Place the Heads on the Lighting Stands and you are ready to take pictures.<br />
FluoResCenT<br />
INT151|Kit includes:-<br />
2 x Ez-Flo heads with Ez-fit Softboxes<br />
2 x Lighting Stands<br />
8 x 28 watt Lamps (INT034)<br />
2 x Four Way Adapters<br />
1 x Educational DVD<br />
The Ez-Flo Lighting Kit is the ideal solution to Portable Lighting for use in the home to create the perfect<br />
home studio to photograph the family. In addition to family photos it can be used to showcase <strong>your</strong><br />
marketing skills for on-line selling of small and medium sized products. If you are a more advanced<br />
photographer, you may be asked to photograph the company executives without the need of a full sized<br />
studio.<br />
In fact <strong>Interfit</strong> has made this easy for you; we show you how to do this on the Educational DVD included.<br />
Ez-Flo • Fluorescent<br />
7
8<br />
Cool-lITe<br />
INT103|Lamp No. INT034 (28 watt)<br />
A daylight balanced cold light source producing a soft even light from its 40cm (16”) Flood<br />
Reflector. Three 28 watt Spiral Fluorescent Lamps produce daylight balanced illumination<br />
(5200K) making the light suitable for digital or film. Supplied complete with a Nylon<br />
‘Shower Cap’ Diffuser that further softens the light. The Cool-Lite benefits are: Long Life Lamps,<br />
Flicker-Free operation, low power consumption, Ideal for use with both Digital and Film Cameras.<br />
3 Kits complete with <strong>Interfit</strong> Pop-Up-Light Tents offer an easy<br />
and effective way of eliminating unwanted reflections and<br />
shadows when photographing small and medium<br />
sized objects.<br />
<strong>Interfit</strong> Pop-Up-Light Tents are available in three sizes from<br />
60cm (24”) to 122cm (48”). All three tents are complete<br />
with removable Black & White Background Cloths and a<br />
Front Panel that has a slit in it to allow the insertion of the<br />
camera lens avoiding a reflection of the camera itself and<br />
possibly the photographer, on reflective subjects such as<br />
glass or polished metals.<br />
INT321|60cm (24”) Pop-Up Light Tent Kit<br />
INT322|90cm (36”) Pop-Up Light Tent Kit<br />
INT323|120cm (48”) Pop-Up Light Tent Kit<br />
Each kit comprises:<br />
2 x Cool-Lite Heads<br />
2 x Lighting Stands<br />
1 x Pop-Up Light Tent<br />
suPeR Cool-lITe ITe 4<br />
The Super Cool-Lite 4 single head kit introduced in 2010<br />
is a small compact unit using daylight balanced and<br />
energy efficient 28 watt lamps to the full.<br />
The kit includes a 40cm 16” high contrast reflector<br />
allowing you to introduce shadows when required and a<br />
60cm 24” square softbox for softer lighting.<br />
Ideal as an additional head to supplement other units in<br />
the super Cool-Lite ranges or as a stand alone unit for<br />
great results.<br />
Either way the SC4 SC4 offers affordability and portability portability in one simple simple<br />
solution with the equivalent of 400 watts the SC4 SC4 only consumes<br />
less than 100 watts of energy per KW hour.<br />
INT291|Single head kit<br />
1 x 60cm (24”) Softbox<br />
1 x 40cm (16”) Reflector<br />
4 x 28 Watt Lamps<br />
Educational Training<br />
Included<br />
INT034|Replacement Lamp (28 watts)<br />
Recommended lighting stand COR751 (not included)<br />
Please note 55 watt lamps must NOT be used in this product.<br />
Fluorescent • Cool-Lite • Super Cool-Lite 4
suPeR Cool-lITe 4<br />
The Twin Softbox 55 watt Lamp Kit produces the<br />
equivalent of 900 watts per head of Tungsten Lighting<br />
from the included energy efficient and daylight<br />
balanced Lamps. Therefore this 1800 watt Kit is a<br />
powerful addition to the popular<br />
Super Cool-Lite range.<br />
The INT293 Kit includes an Educational DVD to help<br />
you through the set up and how to use Fluorescent<br />
Lighting to achieve great results.<br />
Just like the SC4 each Head allows you to control the<br />
lighting in two switchable banks per head. This allows you to<br />
control lighting ratios and contrast. With the addition of two 70cm 27”<br />
Octoboxes, the SC4 55 watt is the perfect product for portraits or for product<br />
photography when near shadowless lighting is required.<br />
These units can also be packed into a relatively compact <strong>Interfit</strong> Lighting Case<br />
available as an optional extra. We recommend using the INT434 Roller Case<br />
allowing full portability and safe storage.<br />
INT293|Twin Softbox Kit<br />
2 x 70cm (27”) Octoboxes<br />
8 x 55 Watt Lamps (INT041)<br />
2 x Lighting Stands<br />
INT117|Super Cool-Lite 5 Kit<br />
2 x Super Cool-Lite 5 heads<br />
2 x Softboxes<br />
2 x High contrast reflectors<br />
2 x Lighting stands<br />
2 x Power cables<br />
10 x Lamps (INT034)<br />
These units offer a convenient yet economical<br />
method of modern studio lighting, suitable for use<br />
with conventional still Digital or Video Cameras.<br />
They provide a soft uniform diffused light. Ideal for<br />
Portraits in a confided area or Web Based <strong>Product</strong><br />
Photography, and can be combined with a Light Pod<br />
or Pop Up Light Tent.<br />
For <strong>your</strong> convenience we offer a Twin Head Kit<br />
(INT117) which features 2 Softboxes and 2 High<br />
Contrast Reflectors with Diffuser Panels and 2 Lighting<br />
Stands. Below you will find the versatility of the kit<br />
useful for most types and styles of photography.<br />
The Super Cool-Lite 5 Head uses daylight balanced<br />
Fluorescent Lamps equivalent to 600 watts of<br />
Tungsten Lighting per head for excellent quality<br />
results with a colour balance of 4800-5200k.<br />
<strong>Interfit</strong> recommends using ISO400 or above with<br />
continuous lighting. The INT117 options give you the<br />
choice of using the kit as twin Softboxes, twin High<br />
Contrast Reflectors or as a combination of the two.<br />
Super Cool-Lite 455 • Super Cool-Lite 5 • Fluorescent<br />
Educational Training<br />
Included<br />
INT116|Single head Super Cool-Lite 5|Lamp No. INT034 (28 watt)<br />
9
10<br />
INT213|Single head Super Cool-Lite 6|Lamp No. INT042 (32 watt)<br />
Utilising all of the SC6’s design features but with more power, the Super<br />
Cool-Lite 6 has been developed from the ground up, with new fixings for the<br />
High Contrast Reflector and a simple to build Octobox.<br />
In addition to the High Contrast Reflector and Octobox the SC6 features a new<br />
Grab Handle on the Rear Panel for ease of tilting the unit up and down. The new<br />
Rear Panel also houses the six individual illuminated switches allowing you to<br />
instantly see which of the powerful 32 watt Lamps are on or off.<br />
These units offer a convenient yet economical method of modern studio lighting,<br />
suitable for use with conventional still, Digital or Video Cameras. They provide a<br />
soft uniform diffused diffused light. Ideal for Portraits or web based <strong>Product</strong> Photography,<br />
Photography,<br />
and can be combined with a Light Pod or Pop Up Light Tent.<br />
The INT213 contains a Single Head Head with a High Contrast Reflector and an Octobox<br />
Softbox. For <strong>your</strong> convenience we offer a a Twin Head Head Kit (INT214) which features 2<br />
Softboxes and 2 2 High Contrast Reflectors with with Diffuser Panels and 2 Lighting Stands.<br />
You will find the versatility of the kit useful for most types and styles of<br />
photography. The Super Cool-Lite 6 Head Head uses near near daylight (4800-5200k) balanced<br />
Fluorescent Lamps equivalent to 650 watts of Tungsten Lighting per Head for<br />
excellent quality results.<br />
These units offer the same benefits as other Super Cool-Lite Heads and can be<br />
combined with any other units in the <strong>Interfit</strong> Super Cool-Lite range.<br />
The Octobox is 80cm (31”), ideal for portraits, providing a soft and uniform light<br />
source ideal where skin tones are the major content of the image.<br />
The supplied High Contrast Reflector is 40cm 40cm (16”) with a highly highly reflective dimpled<br />
silver surface offers a soft diffused light which is ideal for <strong>Product</strong> Photography<br />
when soft shadows may be required.<br />
INT214|Super Cool-Lite 6 Twin Head Kit|Lamp No. INT042 (32 watt)<br />
2 x Super Cool-Lite 5 Heads<br />
2 x Softboxes<br />
2 x High Contrast Reflectors<br />
2 x Lighting Stands<br />
2 x Power Cables<br />
12 x Lamps (INT042)<br />
Fluorescent • Super Cool-Lite 6
INT218|Single Head Super Cool-Lite 655|Lamp No. INT041 (55 watt)<br />
INT219|Super Cool-Lite 655 Kit|Lamp No. INT041 (55 watt)<br />
The Super Cool-Lite 655 offers increased power equivalent to 1320 watt of Tungsten Lighting per Head.<br />
Each single head is supplied with<br />
1 x Super Cool-Lite 655 Head<br />
6 x Lamps (INT041) 55 watt<br />
1 x High Contrast Reflector 47cm (18”)<br />
1 x Soft Light Cover for the above<br />
1 x Octobox 80cm (31”)<br />
1 x Power Cable<br />
The Twin Head Kit contents include two Softboxes and High Contrast Reflectors, plus 2 x COR752 lighting stands. The<br />
lamps are flicker free and energy saving lamps balanced to 5000k - 5500k offering excellent results with digital or video<br />
cameras.<br />
suPeR su Cool-lITe 9 MKII<br />
INT220|Single Head Super Cool-Lite 9 MkII|Lamp No. INT042 (32 watt)<br />
INT487 bag<br />
Sold separately<br />
The Super Cool-Lite 9 MkII has been developed off the back of the highly<br />
successful Super Cool-Lite 6. Utilising all of the feature rich design with more<br />
power to ensure you have the best possible illumination for <strong>your</strong> subject.<br />
With new strong fixings the high contrast reflector and a simple to build octobox<br />
makes life easy for the working professional photographer. In addition to the<br />
high contrast reflector and octobox, the SC9 features a new grab handle on<br />
the rear panel for ease of tilting the unit up and down. The new rear panel also<br />
houses the six individual illuminated switches allowing you to instantly see<br />
which of the powerful 32 watt lamps are on or off.<br />
These units offer a convenient yet economical method of modern studio lighting,<br />
suitable for use with conventional still, digital or video cameras. They provide a<br />
soft uniform diffused light. Ideal for portraits or web based product photography,<br />
and can be combined with a light pod or pop up light tent or any other cool-lite<br />
in the <strong>Interfit</strong> range.<br />
We recommend using COR752 stands with SC9 MkII heads.<br />
The supplied high contrast reflector is 40cm (16”) with a highly reflective dimpled<br />
silver surface offers a soft diffused light which is ideal for product photography<br />
when soft shadows may be required.<br />
The Octobox Octobox is 80 cm (31”) is ideal for portraits, providing a soft and uniform<br />
light source ideal where where skin tones are are the major content of the the image.<br />
The Super Cool-Lite 9 head uses near daylight (4800- 5200k) 5200k) balanced balanced<br />
fluorescent lamps equivalent to 1150 watts watts of Tungsten lighting per head for<br />
excellent quality results.<br />
INT220|Single Head SC9 MkII<br />
Each Single Head is supplied with<br />
1 x Super Cool-Lite 9 MkII Head<br />
1 x High Contrast Reflector 40cm (16”)<br />
9 x Lamps 32 watt (INT042)<br />
1 x Octobox 80cm (31”)<br />
1 x Power Cable<br />
Super Cool-Lite 655 • Super Cool-Lite 9 MkII • Fluorescent<br />
INT221|Twin Head Kit SC9 MkII<br />
Each Twin Head Kit is supplied with<br />
2 x Super Cool-Lite 9 MkII Heads<br />
2 x High Contrast Reflectors 40cm (16”)<br />
18 x Lamps 32 watt (INT042)<br />
2 x Octoboxes 80cm (31”)<br />
2 x (COR752) Lighting Stands<br />
2 x Power Cables<br />
11
12<br />
FLUORESCENT RINg LITE 3<br />
INT339|Fluorescent Ring Lite 3<br />
The Fluorescent Lite Ring is ideal for use in the studio to create a ring shaped catch light in the eye of the subject,<br />
whilst providing a super soft level of lighting on skin tones. When used in combination with other <strong>Interfit</strong> Super Cool-<br />
Lite products you can achieve a stylised look to <strong>your</strong> images that will have other photographers asking <strong>your</strong> secrets.<br />
Ideal for using close up lighting of both Portraits and <strong>Product</strong>s to create a near shadowless lighting style. <strong>Interfit</strong><br />
recommends using 400ISO and shooting at wide open apertures for a distinctive style to <strong>your</strong> lighting.<br />
SUPPLIED ACCESSORY<br />
Power Control Switches<br />
Colour Temperature 5500K<br />
Output 90 Watts<br />
Distance 0.5m 1m 2m<br />
Lux 5500 1500 420<br />
Can take up to a 100mm Lens Hood<br />
OPTIONAL EXTRAS<br />
Soft Cover Diffuser INT338|Pro Bracket<br />
INT489|Carry Case<br />
The Pro Bracket enables high Enables you to carry<br />
end cameras with built in battery and store <strong>your</strong> RF3<br />
packs and motor drives to be used in a safe protective<br />
on a stable platform including a<br />
secondary stand mount.<br />
lightweight case.<br />
Fluorescent • FR3 Fluorescent Ring Lite 3
KoolTuBZ 4 | KoolTuBZ 6<br />
INT331|Kooltubz 4 Single head kit|Lamp No: INT039 (55 watt)<br />
INT332|Kooltubz 6 Single head kit|Lamp No: INT039 (55 watt)<br />
Supplied complete with 1 x Kooltubz 4 or Kooltubz 6<br />
4 or 6 “Osram Dulux” energy efficient and flicker free 55 watt lamps<br />
providing a near daylight balanced light source at 4700 lumens per tube.<br />
These are cool to touch lamps making them ideal for photographing<br />
children, food, and general portraiture. Additionally they are ideal for<br />
video users and broadcast usage.<br />
Each lamp is equivalent to 220 watt of Tungsten lighting therefore the<br />
4 lamp unit provides 880 watts and 1320 watts for the 6 lamp head.<br />
Full controllability of the lamps allows a combination<br />
of 2 x 55 watt lamps to be turned on or off via the<br />
rear panel switches so you can control <strong>your</strong> lighting<br />
with ease. In addition to the above 4 x Silver reflector<br />
corners attach to the barndoors to make the softbox<br />
along with a translucent cover.<br />
1 x Carry Case<br />
1 x Power cable complete these versatile kits.<br />
The stand clamp on both units can also be rotated to<br />
use the head in portrait or landscape mode.<br />
Using a worldwide voltage of 100 to 240 volts allows<br />
mobile video studios and photographers the perfect<br />
choice as a compact lighting travel companion.<br />
INT331|Kooltubz 4<br />
INT332|Kooltubz 6<br />
Kooltubz 4 • Kooltubz 6 • Fluorescent 13
The Monstar 3 is an affordable solution to modern studio lighting,<br />
having a uniform light source enables the photographer to capture<br />
excellent results, proven in many studios all over the world.<br />
Using an established lamp the Monstar provides 150 watts of light<br />
from each lamp equivalent to 600 watt of Tungsten lighting, therefore<br />
3 is equal to 1800 watts per head, ideal for larger portraits groups and<br />
product photography.<br />
INT482|Single head kit|Lamp No: INT040 (150 watt)<br />
Supplied complete with:<br />
1 x Monster Heads<br />
1 x 8.5ft (2.65m) Lighting Stands<br />
1 x Carry Case<br />
1 x 43”(110cm) Octobox<br />
3 x 150 watt Lamps (INT040)<br />
(Each is equivalent to 600 watt of Tungsten lighting).<br />
Therefore a total of 1800 watts per Head.<br />
INT040|150 watt Fluorescent daylight balanced energy efficient<br />
replacement lamp<br />
14 Fluorescent • Monstar
The Matinee range of LED Lighting offers the perfect tools for the DSLR and Video generation of film makers,<br />
providing a lightweight and controllable fill.<br />
The dimmer puts the operator in total control, as ambient lighting conditions change. The LED 256 unit clamps on top<br />
of any camera using a standard hotshoe mount, and are lightweight and small enough to live there even when not in<br />
use. An adjustable Articulated Arm (INT344) is also available for positioning of the light to enable the operator to adjust<br />
and change the look and direction of the light source and use as an off axis kicker for instance. The Matinee LED 256 is<br />
powered by a Power Pack or an Optional Battery Pack available separately.<br />
Optional 4600 mAh battery and<br />
charger available (INT479)<br />
The Rear Panel Features:<br />
Simple easy to use controls<br />
ON/OFF and a dimmable<br />
output control.<br />
Power Pack Connection.<br />
Optional Battery Pack<br />
Connectivity.<br />
Battery Release Button.<br />
Transparent diffuser panel included<br />
INT356|Matinee LED 256<br />
Tungsten conversion panel Included<br />
Supplied complete with:<br />
1x Super bright dimmable LED panel<br />
1x Light stand adaptor<br />
1x Multi-voltage power pack<br />
1x Cold shoe & diffuser panel<br />
1x Tungsten conversion panel<br />
1x Mains power pack<br />
Rechargeable Li-Ion Battery available separately<br />
Multi voltage power pack included<br />
ARTICULATED ARM<br />
INT344|Articulated Arm<br />
Matinee 256 • LED<br />
15
16<br />
Multi voltage power pack Included<br />
(INT476)<br />
Matinee 1000 1000 is powered by a multi voltage<br />
(AC 110v / 240v) mains power pack to enable<br />
the Matinee 1000 to be used in almost any<br />
country in the world, for the times when power<br />
is not readily available a battery pack may be<br />
connected to the rear panel to power the unit for<br />
up to 60 min’s on a full charge.<br />
Each Matinee 1000 has 62 watts giving the<br />
equivalent of 17000 Lux at 0.5 m (20”) and Lux<br />
5900 at 1m (39”) providing ample power when<br />
needed most, ideal for small confined spaces<br />
thanks to a fully operational dimmable switch on<br />
the rear panel.<br />
INT358|Matinee LED 1000<br />
INT357|Matinee LED 320<br />
Dual layer layer LED output<br />
White balance conversion - Daylight to Tungsten<br />
Intelligent dimmable Daylight/Tungsten lighting<br />
LED • Matinee 320<br />
Supplied complete with:<br />
1 x Super Bright Dimmable LED panel<br />
1 x Lighting Stand Adaptor<br />
1 x Multi Voltage Power Pack<br />
1 x Cold shoes & Diffuser Panel<br />
1 x Mains Power Pack<br />
Rechargeable Li-Ion Battery available separately<br />
The Dual Layer LED’s provide the ability to<br />
adjust the LED’s white balance to suit almost<br />
any lighting conditions within its 5600k<br />
to 3200k Daylight to Tungsten range and<br />
anywhere in between quickly and easily.<br />
The Matinee LED 320 is complete with a diffuser<br />
panel, metal coldshoe adaptor to fit most<br />
standard lighting stands or can be mounted on<br />
a camera hotshoe. In addition, a multi voltage<br />
power pack is included.<br />
For use where power can not be provided use<br />
the additional INT479 battery pack.<br />
Optional 4600 mAh battery and<br />
charger available (INT479)
EX150MKIII MKIII<br />
EXD200<br />
EX300<br />
EXD400<br />
FLASH<br />
Image supplied courtesy of Matt Darlington • www.mattdarlingtonphotos.co.uk<br />
THE EX FAMILY<br />
EX400 Ti<br />
EX Family • Flash 17
18<br />
EX150MKIII MKIII<br />
The EX150MkIII benefits from a long pedigree of multiple<br />
award winning EX150 lighting kits being improved with each<br />
generation.<br />
The EXMkIII has touch sensitive controls on the rear of the unit.<br />
The new controls make using the EX150MkIII a pure and simple<br />
joy to use.<br />
Listening to customer feedback the new EX150MkIII has the<br />
ability to turn on or off the beep, the modelling lamp is now<br />
multi-functional with greater control than its predecessor. An<br />
extended range for sensor control when using infrared syncing.<br />
A low sync voltage to protect <strong>your</strong> Digital SLR.<br />
A new feature is a built in carry handle that makes positioning<br />
the unit much easier than ever before. Carrying forward all the<br />
best features to the new model each head has: user changeable<br />
flash tubes, switchable modelling lamps and a built-in infrared<br />
sensor to add to the ease of use.<br />
Using the tried and tested EX Bayonet fitting, the EX150MkIII<br />
allows a wide range of accessories to be used such as softboxes,<br />
beauty dishes and many more light shapers to obtain that<br />
perfect moment. With highly specified kits awaiting <strong>your</strong><br />
command, you will be ready to take those special memories<br />
that life has to offer and share with family and friends alike.<br />
The EX150MkIII is available in two highly specified kits from a<br />
two head kit for simple lighting techniques to a fully fledged<br />
three head kit complete with a carry case for easy transport<br />
and storage.<br />
Flash • EX150 MkIII
INT353|3 Head Kit|Lamp INT038 75 watt<br />
3 x EX150 MkIII heads<br />
3 x Modelling Lamps<br />
3 x Air Damped Light Stands<br />
1 x Translucent Umbrella<br />
2 x 60cm (24”) Softboxes<br />
3 x Sync Cables<br />
3 x Power Cables<br />
1 x Educational DVD<br />
Each EX150MkIII Kit features a DVD enabling you to set up the kit<br />
in <strong>your</strong> own time at <strong>your</strong> own pace, and takes you though all of the<br />
basics for Studio lighting from setting up the camera to getting the<br />
best results from Studio flash to setting up the kit for the first time.<br />
In addition we show you additional accessories to expand <strong>your</strong><br />
<strong>creativity</strong> from Radio Triggers to 5 in 1 reflectors to enhance <strong>your</strong><br />
lighting experience to the full. And we will even show you how we<br />
shot the cover case for the DVD!<br />
INT352|2 Head Kit|Lamp INT038 75 watt<br />
2 x EX150 MkIII heads<br />
2 x Modelling Lamps<br />
2 x Air Damped Light Stands<br />
1 x Translucent Umbrella<br />
1 x 60cm (24”) Softbox<br />
2 x Power Cables<br />
1 x Educational DVD<br />
EX150 MkIII • Flash<br />
Educational Training<br />
Included<br />
19
20<br />
EXD200<br />
The EXD200 is lightweight and stylish yet very robust, and it is<br />
designed specifically for 21st century photographers on the move.<br />
The 5 volts sync voltage makes them highly suitable for use with<br />
all current digital and film cameras. Push button controls allow the<br />
desired power levels and functions to be quickly set. EXD200 also has<br />
user changeable flashtubes.<br />
The EXD can also overcome the problem caused by cameras that send<br />
out a pre flash before exposure, a simple press of the buttons tells the<br />
EXD to ignore up to 3 pre-flashes. Accurate power adjustment in one<br />
tenth of an f-stop increments over a 4 f-stop range and a high guide<br />
number of 45m (135ft) ensure the exact amount of light required.<br />
100% recharge is confirmed by both audible and visual means in<br />
less than 2 seconds. A built in Infra red slave cell allows freedom in<br />
the studio when used with the <strong>Interfit</strong> IRX transmitter (INT411).<br />
The EXD200 kit has the same configuration as the EX150 MkIII 2<br />
head kit and shares the same range of accessories to compliment<br />
this home studio kit. An all in one kit bag is included with the<br />
EXD200 kit.<br />
INT119|2 Head Kit|Lamp INT515 60 watt<br />
2 x EXD200 Heads<br />
2 x Modelling Lamps<br />
2 x Air damped Light Stands<br />
1 x Translucent Umbrella<br />
1 x 60cm (24”) Softbox<br />
2 x Power Cables<br />
1 x Educational DVD<br />
1 x kit Bag<br />
Flash • EXD200<br />
INT118|EXD200 Single Head
The <strong>Interfit</strong> EX300 combines all the features of the<br />
multiple award winning EX150 MkII with more<br />
power and the addition of fan cooling for constant<br />
and reliable service in a larger polycarbonate body.<br />
Easy to use controls make the EX300 desirable to<br />
any user where more power and versatility is<br />
required in a studio set up.<br />
Each head features, user changeable flash tubes, switchable<br />
modelling lamps, fan cooling for prolonged use and Infrared<br />
and white light sensitive light sensors and an additional easy to use<br />
rear handle allows for precise positioning.<br />
INT486|2 Head Kit|Lamp INT499 150 watt<br />
2 x EX300 Heads<br />
2 x Air Damped Light Stands<br />
1 x Translucent Umbrella<br />
1 x 60cm (24”) Softbox<br />
2 x Power Cables<br />
1 x kit Bag<br />
The <strong>Interfit</strong> EXD400 combines all the features of the multiple<br />
award winning EX150 MkII with fan cooling and a larger<br />
polycarbonate body.<br />
Easy to use controls make the EXD400 desirable where finite<br />
control is required over the output settings along with double<br />
the power of the EXD200 versatility is a buzz word often used<br />
to describe a studio strobe, here its certainly the case in this<br />
compact 400 watt head.<br />
Each head features, user changeable flash tubes, switchable<br />
modelling lamps, fan cooling for prolonged use and Infrared<br />
and white light sensitive light sensors and an additional easy<br />
to use rear handle allows for precise positioning.<br />
The EXD400 also features a pre-set flash function to enable the<br />
head to reduce the pre-focus flashes by some of today’s digital<br />
compact cameras, enabling the Sync cell to correctly pick up<br />
the first, second or third flash therefore ignoring the<br />
pre-flash used for focusing.<br />
INT491|2 Head Kit|Lamp INT499 150 watt<br />
2 x EXD400 Heads<br />
2 x Modelling Lamps (INT499)<br />
2 x Air Damped Light Stands<br />
1 x Translucent Umbrella<br />
1 x 60cm (24”) Softbox<br />
2 x Power Cables<br />
1 x Kit Bag<br />
EX300 • EXD400 • Flash<br />
21
EX400 Ti<br />
The EX400 Ti is the latest generation in the multiple award winning EX range,<br />
utilising a unique radio control system the heads have up to seven individual ID’s<br />
programmed by the user. This allows each head to be controlled from the camera<br />
position without having to go to the EX400 Ti unit to make adjustments, all the<br />
main functions such as modeling light, flash power etc.<br />
INT477|EX400 Ti 2 Head Kit|Lamp INT499 150 watt<br />
2 x EX Ti 400 Heads<br />
2 x COR751 Lighting Stands<br />
1 x INT476 Dynamic Ti Trigger<br />
2 x 100 cm Softboxes<br />
1 x Kit Bag<br />
2 x Power Cables<br />
22 Flash • EX400 Ti<br />
INT476|Dynamic Ti Trigger<br />
INT475|EX400 Ti Single Head<br />
(trigger not included)<br />
• Control MAIN functions from<br />
the camera position<br />
• Adjust power settings on the<br />
EX Ti 400 Modelling Lamp.<br />
• On / Off / Proportional mode<br />
• All from the camera position up to 12 Metres<br />
• Adjust flash output power
Each Head has the ability to assign an ID<br />
Number 1 though to 7, this allows the<br />
Dynamic Trigger to be able to adjust the<br />
features of each head separately from any<br />
the other EX Ti heads being used in the<br />
same room up to 12 meters away from the<br />
trigger. If you assigned a head to channel<br />
1 and another head to channel 2 you can<br />
individually adjust each heads power<br />
functions and fire the head via the<br />
Dynamic Ti Trigger by setting its<br />
corresponding channel number<br />
on the trigger.<br />
When used with the Sync cells turned off,<br />
complete control is offered via radio signals<br />
only. Once you have set up the controls<br />
and the lighting the way you want them to<br />
operate, simply press the top left button on<br />
the Dynamic Ti Trigger though to channel 8,<br />
this allows all heads to fires in sync. Should<br />
you have more than one head set on a<br />
single channel you can adjust and fire them<br />
in sync via the Dynamic Ti Trigger.<br />
Available as a Single Head, or Twin Softbox<br />
kit. The EX Ti 400 is an ideal product for<br />
every generation of photographer.<br />
EX400 Ti • Flash<br />
23
24<br />
EX FITTINg ACCESSORIES<br />
INT484|EX Octobox 90cm (36”)<br />
INT485|EX Softbox 100cm x 100cm (39” x 39”)<br />
INT211|EX Softbox 60cm x 60cm (24” x 24”)<br />
INT249|Beauty Dish 70cm (27” ) White<br />
INT210|Barndoor Set with Honeycomb Grid<br />
and Colour Gel Set Red, Blue, Yellow<br />
Lighting Accessories • EX Head Fitting Accessories<br />
LIgHTINg A<br />
RF4999|Beauty Dish 40cm (15 1 /2” )Silver<br />
INT311 |Beauty Dish Honeycomb<br />
INT341 |Beauty Dish Soft Light Adapter<br />
RF5007|Honeycomb Grid for INT249<br />
INT212|Snoot with Gel Set and Honeycomb Grid<br />
(removable)<br />
Please turn off the modeling light when using honeycombs gels and snoots to prolong the life of the lamps.<br />
Excessive heat may build up. Do not touch metal surfaces as it may be hot.
CCESSORIES<br />
INT411|IRX Infrared Trigger<br />
IRX Infrared units send a beam of near invisible light which<br />
is detected by the strobes Sync sells this then fires the lights.<br />
Infrared can be affected by strong ambient light, in this case<br />
we recommend the use of a Radio Transmitter Det for best<br />
performance.<br />
INT435|Large 3 Head All in INT434|Small 2 Head All in One<br />
One Roller Bag<br />
Roller Bag<br />
For use with EX300/<br />
For use with EX150/<br />
EXD400/EXti 400<br />
twin head kits and<br />
EXD200 twin head kits<br />
Stellar three head kits<br />
EX OPTIONAL ACCESSORIES<br />
EX Recommended Optional Accessories • Lighting Accessories<br />
INT273|5 in 1 Reflector Kit ideally used<br />
with Softboxes or Beauty Dishes<br />
INT436|Bag for 2 head EX150 kits<br />
For all versions of EX150<br />
twin head kits<br />
STR115|Standard Hotshoe<br />
Adapter with<br />
PC connector<br />
STR114|Hotshoe Adapter for<br />
Sony/Minolta users<br />
25
Using the battery pack with the specially designed Xtreme<br />
head, power is reduced to a safe and workable 12 volts.<br />
100 flashes per 6 to 8 hour charge allows you to go almost<br />
anywhere and be creative in those locations that were previously<br />
unavailable to standard mono block systems.<br />
INT472|Stellar Xtreme 300 watt Single head|Lamp INT499<br />
INT474|Stellar Xtreme 300 watt<br />
Single Head + Battery Pack Kit<br />
26 Flash • Stellar Xtreme<br />
Shoot with Stellar Xtreme<br />
Image supplied courtesy of Matt Darlington<br />
www.mattdarlingtonphotos.co.uk
‘S’ TYPE ACCESSORIES<br />
LIgHT SHAPINg TOOLS| ‘S’ TYPE FITTINgS<br />
INT419|60 x 60cm (24 x 24”)<br />
INT424|100 x 100cm (39 x 39”)<br />
INT425|100 x 100cm (39 x 39”) Octobox<br />
RF5000|40cm (15 1 /2“)<br />
INT311 |Honeycomb<br />
INT341 |Soft Light 40cm (15 1 /2“)<br />
INT259 |70cm (27”) Soft White Surface<br />
RF5011|Wide Beam 45cm (17 1 /2 “) x 22cm (8 1 /2 “)<br />
RF5010|Narrow Beam 34cm (13 1 /2 “) x 30cm (12”)<br />
RF5005|45 o Background reflector 26cm (10”)<br />
AC8011| To be used with Barn Door Set (RB4001)<br />
INT426|Grid and masks Softbox Kit 60cm x 80cm (24x31”)<br />
AH6020|20 Degrees<br />
AH6030|30 Degrees<br />
AH6060|60 Degrees<br />
Honeycombs fit standard Sellar & Venus Rims<br />
INT209 |20 Degrees<br />
RF5006|Snoot<br />
RB4001| Barn Door Set<br />
Please turn off the modeling light when using honeycombs gels and snoots to prolong the life of the lamps.<br />
Excessive heat may build up. Do not touch metal surfaces as it may be hot.<br />
Light Shaping Tools • ‘S’ Type Fittings • ‘S’ Type Accessories<br />
27
LIgHTINg STANDS<br />
28 Accessories • Lighting Stands<br />
COR750|Max height 230cm (90”)<br />
COR751|Max height 265cm (104”)<br />
COR752|Max height 300cm (118”)<br />
COR753|Max height 394cm (155”)<br />
COR754|Max height 250cm (99”)<br />
The special combi-boom stand (COR754) can be used either as a standard Lighting Stands or with its fold-away arm<br />
outstretched to hold either a small lighting head or a collapsible reflector. The boom also has provision to add a weight to<br />
counter-balance a head or reflector when the tube is extended. Ideal for Strobies <strong>Product</strong>s like the softbox or beauty dish.<br />
COR754|Max height 230cm (90”)<br />
COR758|Floor COR758 COR758|Floor Stand<br />
Max height 100cm (39”) min 5cm (2”)<br />
COR759|Compact Compact Background Stand<br />
Max height 82cm (32”)<br />
ACCES<br />
COR757|2 Section Boom Arm<br />
This 2 section boom arm can be fitted to the COR751, 752 & 753 stands. The counter balance weight can be adjusted to<br />
accommodate the different weights of the range of <strong>Interfit</strong> lights. The brass end stud is reversible with both 1/2 and 3/8th threads.
SORIES<br />
INT432|Lighting Stand Bag<br />
Carries up to:-<br />
6 x COR750 Light Stands<br />
5 x COR751 Light Stands<br />
4 x COR752 Light Stands<br />
INT433|All in One Kit Bag<br />
Will hold 2 x heads, up to 4 stands & provides extra room<br />
for accessories and cables (comes standard with 150 and<br />
300 watt Stellar X & XD flash kits). Included with all twin<br />
head Stellar X Tungsten and Stellar X Halogen kits.<br />
INT437|All in One Kit Bag for Super Cool-Lite 4, 5, 6<br />
(not 55 watt units) ranges or <strong>Interfit</strong> Prolites 5 or 9.<br />
Will hold 2 x Super Cool-Lite heads with reflectors attached,<br />
and will store softboxes, Lighting Stands (up to 4 x COR751)<br />
and all cables. Sturdy construction with rollers for ease of use.<br />
INT436|Bag for 2 head EX150 kits<br />
For all versions of EX150 twin head kits.<br />
INT434|Small 2 Head All in One Roller Bag<br />
For use with EX150/EXD200 twin head kits.<br />
INT435|Large 3 Head All in One Roller Bag<br />
For use with EX300/EXD400/EXti 400 Twin head kits<br />
and Stellar three head kits.<br />
INT487|All in One Kit Bag for Super Cool-Lite 9 or<br />
655 Kits<br />
Will hold 2 x Super Cool-Lite heads with reflectors<br />
attached, and will store softboxes, Lighting Stands<br />
(up to 4 x COR752) and all cables. Sturdy construction<br />
with rollers for ease of use.<br />
Kit Bags • Accessories<br />
KIT BAgS<br />
29
wIRELESS CAMERA<br />
RELEASE TRIggERS<br />
nIKon<br />
STR123|Delta Remote for Nikon Cameras<br />
For use with the following Nikon cameras using the<br />
provided cables, simply attach the receiver for the hotshoe,<br />
plug in the cable to <strong>your</strong> camera body and away you go.<br />
The Delta remote is a hotshoe fitting radio shutter release<br />
with LED confirmation for Auto Focus, Single/Lamp or<br />
Continuous frame rate operations.<br />
Ideal for sport or wildlife photographers to enable the<br />
camera to be placed in a remote location and operated up<br />
to 100 mtrs (320’) away from the camera.<br />
For use with the following cameras via the included cables.<br />
N8<br />
N10<br />
N6<br />
Canon<br />
Nikon D70s/D80 Digital Camera<br />
Nikon N90s/F5/F6/F100/F90/F90X<br />
D1/D1H/D1X/D2H/D2Hs/D2X/D2Xs<br />
D3/D3x/D3s/D200/D300/D300s/D700/D4/<br />
D800<br />
Kodak DSC-14N/Fuji S3 Pro/Fuji S5 Pro<br />
Nikon D90 D5000<br />
STR124|Delta Remote for Canon Cameras<br />
For use with the following Canon cameras using the<br />
provided cables, simply attach the receiver for the hotshoe,<br />
plug in the cable to <strong>your</strong> camera body and away you go.<br />
C6<br />
C8<br />
Canon EOS 30/33/50/300/300D<br />
(Digital Rebel)/350D(Rebel XT)/<br />
400D(Rebel XTi)/450D(Rebel XSi)<br />
/500D(Rebel T1i)/1000D(Rebel XS)<br />
Canon EOS 1V/3/1D/1Ds/1DS<br />
Mark II/1Ds Mark III/1D Mark II/1Ds Mark III<br />
10D/20D/30D/40D/50D/5D/5DMkII<br />
30 Accessories • Electronics<br />
ELECTR<br />
STUDIO FLASH<br />
TRIggERS<br />
INT411|IRX Infrared Trigger<br />
Suitable for all cameras<br />
with a standard hotshoe.<br />
Operates up to 10 mtrs (30’).<br />
Offers freedom in the studio by<br />
replacing sync cables. Works<br />
with most makes of lighting,<br />
able to receive infrared.<br />
Ideal for use with all <strong>Interfit</strong><br />
Flash lighting kits by using<br />
the built in sync feature of<br />
each head.<br />
Not for use with Sony/Minolta cameras.<br />
INT412|Single Channel Radio Transmitter Set<br />
Specifically designed for <strong>Interfit</strong> Flash systems (except<br />
2005/2006 Stellar units). Uses twin “AAA” batteries<br />
with a working range up to 50 mtrs (150’). Kit includes<br />
both mini and standard jacks.<br />
The transmitter and receiver have power switches<br />
to conserve batteries when not in use. LED lamp<br />
confirmation of system signal. Maximum shutter<br />
speed 1 /125 with a focal plane shutter or up to 1 /500<br />
with a leaf type shutter.<br />
INT410|Flashmeter<br />
Offers great value for money,<br />
incident & reflected meter<br />
readings in 1 /3 stop increments.
ONICS<br />
RECEIVER<br />
TRANSMITTER<br />
STR129|i SYNC 4 wireless and Optical Receiver Only<br />
STR130|i SYNC 4 wireless and Optical Trigger Kit<br />
The I Sync 4 has 4 independent radio channels for use<br />
where multiple photographers may be using wireless<br />
triggers such as at a wedding etc. Now you can<br />
set the channel and still keep on shooting without<br />
interference from other photographers.<br />
A major benefit of the receivers is the ability to switch<br />
between optical triggering or wireless triggering.<br />
• Optical triggering is similar to <strong>your</strong> in built sync cell<br />
on <strong>your</strong> studio flash heads and can allow a greater<br />
distance to be used when using Infrared triggers such<br />
as the <strong>Interfit</strong> INT411 or receiving white light from a<br />
second head. Ideal for extending the range where the<br />
flash may not be received by <strong>your</strong> in built sync cells.<br />
• Wireless triggering when used with the radio trigger<br />
on <strong>your</strong> camera allows out of sight flash triggering or<br />
around walls and most obstacles up to a maximum<br />
distance of 30 mtrs (100’).<br />
Each receiver has a built in Lighting Stands tread<br />
on the bottom to allow <strong>your</strong> speedlite to be stand<br />
mounted. In addition a PC sync cable and socket is<br />
included along with a mono jack converter to fit both<br />
large and small jack sync sockets for connecting to<br />
studio lighting. Runs on long life lithium batteries<br />
(included).<br />
SYNC LEADS<br />
Replacement 3 meter (10’) Sync leads with PC connector at one end<br />
to connect to <strong>your</strong> camera and standard mono jack or mini jack to<br />
connect to <strong>Interfit</strong> and most other makes of flash heads.<br />
CIA332|Small Jack CIA331|Large Large Jack reversed polarity<br />
CIA330|Large Jack<br />
INT492|4 Channel Radio Transmitter Set<br />
Uses twin “AA” batteries with a working range up to 50 mtrs<br />
(150’). Kit includes both mini and standard jacks. The transmitter<br />
and receiver have power switches to conserve batteries when<br />
not in use. LED lamp confirmation of system signal. Maximum<br />
shutter speed 1/125 with a focal plane shutter or up to 1/500<br />
with a leaf type shutter. Can be used with Studio Lighting and<br />
also Hotshoe flashguns for off camera work.<br />
Receivers only, INT492R, INT412R<br />
Purchased separately not interchangeable with INT412. Add a<br />
receiver where other photographers may be using flash, such as<br />
at a wedding or a studio group.<br />
Radio triggers generally only need to be connected to one<br />
studio strobe and the Transmitter is inserted into the hotshoe of<br />
the camera. When the camera shutter is released a signal is sent<br />
through the hotshoe and transmitter to the receiver. This then<br />
fires the strobe attached to it.<br />
When the strobe is fired the 2nd and 3rd strobe units will<br />
synchronize via their sync cells providing they can see the flash<br />
from the strobe attached to the receiver.<br />
RECEIVER<br />
• Four channel selection switch<br />
• Wireless or flash triggering<br />
• Hotshot integrated<br />
• PC sync socket included<br />
• Mounts on standard light stands<br />
• Long life batteries included<br />
• Sync cables and jack included<br />
• Optional receivers sold separately<br />
Electronics • Accessories<br />
TRANSMITTER<br />
• PC socket<br />
• Four channel wireless trigger<br />
• On, off and all channel selection<br />
• LED confirmation<br />
• Long life batteries included<br />
31
Image supplied courtesy of Matt Darlington • www.mattdarlingtonphotos.co.uk<br />
Taken using EX300<br />
32 UMBRELLAS<br />
Accessories • Umbrellas<br />
ACCES
SORIES<br />
INT279|<br />
INT289|<br />
INT390|<br />
STANDARD 8mm SHAFTS<br />
INT260|Translucent 90cm (36”)<br />
INT261|Translucent 100cm (39”)<br />
INT262|Silver 90cm (36”)<br />
INT263|Silver 100cm (39”)<br />
INT279|Black/white Umbrella 152cm (60”)<br />
INT289|Translucent/Black/white 152cm (60”)<br />
INT385|gold/Silver Umbrella 152cm (60”)<br />
UMBRELLA BOX (8mm SHAFT)<br />
INT383|Umbrella Box 101cm (40”)<br />
These <strong>Interfit</strong> umbrellas are used in all <strong>Interfit</strong> kits containing umbrellas,<br />
from our basic EX150 home studio kit to a 1000 watt Stellar kit. Therefore<br />
a consistent quality is maintained throughout the <strong>Interfit</strong> range of kits.<br />
Translucent Umbrella’s are used to “Shoot through” achieving a light<br />
loss of just 1 /2 f stop. Silver Umbrella’s are turned away from the subject<br />
resulting in a light loss of just 1 1 /2 f stop.<br />
7mm SHAFT UMBRELLAS<br />
INT390|Translucent 85cm (33”)<br />
INT391|Black/white 85cm (33”)<br />
INT392|Black/Silver 85cm (33”)<br />
INT393|Translucent/Black/Silver 85cm (33”)<br />
INT394|Translucent 109cm (43”)<br />
INT395|Black/white 109cm (43”)<br />
INT396|Black/Silver 109cm (43”)<br />
INT397|Translucent/Black/Silver 109cm (43”)<br />
SHOOT THROUgH<br />
Decide if you will be bouncing light off a ceiling or wall or diffusing the<br />
light through it as this does affect the quality of the light dramatically.<br />
When shooting through you will have a very soft light due to the soft<br />
white surface used in the umbrella, generally this is placed close to the<br />
subject. This also gives the appearance of a large and soft light source<br />
which is ideal for portraits indoors or outdoors.<br />
<strong>Interfit</strong>’s range offers several opportunities by using additional covers<br />
in Black or Silver. These can be also ideal for “BLANKING OFF” (GOBO)<br />
areas you do not want to light in a portrait for instance.<br />
You may not want too much light striking the body or simply<br />
adjusting the drop-off effect of the light on the subject.<br />
REFLECTED<br />
Ideal for shooting large groups or full length portraits as the main or<br />
key light with the lighting set at say 45 degrees this will allow a greater<br />
coverage of light than when compared to a shoot through at the same<br />
distance due to the highly reflective surface used, it also enables us to<br />
keep as much of the heads power as possible over a<br />
greater working distance.<br />
INT383|<br />
INT385|<br />
INT391|<br />
INT392|<br />
Umbrellas • Accessories<br />
33
5in1 REFLECTOR KIT wITH ARM & STAND<br />
5 in 1 Reflector with arm and stand is the ideal way to hold 5 in 1 reflectors<br />
in place. The versatile swivel joint allows positioning at almost any angle. The<br />
standard universal base allows a secure connection to the supplied <strong>Interfit</strong><br />
lighting stand.<br />
The 5 in 1 Reflector is complete with 4 reversible zipped surfaces including<br />
White, Black, Silver & Soft Sun (a Silver gold pattern ideal for digital cameras).<br />
The middle rim has a 1/2 stop translucent diffuser panel ideal for outdoor<br />
photography on bright sunny days.<br />
INT273|5 in 1 Reflector Kit with Arm and Stand<br />
1 x 107cm (42”) 5 in 1 Reflector<br />
1 x <strong>Interfit</strong> Lighting Stand<br />
1 x Reflector Arm<br />
INT274 |Bracket arm only to take up to 107cm (42”) reflectors<br />
INT270 |Bracket arm and 5in1 reflector kit only<br />
INT265 |107cm (42”) 5 in 1 Reflector only<br />
34 Accessories • Reflectors<br />
Colours included<br />
The <strong>Interfit</strong> studio flat panel kit is an indispensable reflector with a<br />
large Gold or Silver surface which is ideal for full length fashion or<br />
portrait shoots.<br />
The reflector comes complete with stand and a special rotating and<br />
tilting bracket which allows the reflector to be used in either vertical<br />
or horizontal mode. By adding several more INT269 or INT271’s<br />
together side by side you can achieve a large soft reflected light<br />
source for some creative lighting techniques.<br />
INT269|89x178cm (35x70”)|gold/Silver<br />
INT271|89x178cm (35x70”)|Black/white<br />
Softsun Black Silver White Translucent<br />
STUDIO FLAT PANEL REFLECTOR<br />
PORTRAIT REFLECTOR KIT<br />
The portrait reflector kit is a highly versatile kit that allows one, two or all<br />
three panels to be individually positioned around the model to give the<br />
desired lighting effect. The kit comes complete with one Gold/Silver reflector<br />
and two Sunlight/Silver reflectors. The three multi-angle joints can also be<br />
used to mount any of the reflectors individually on to a Lighting Stands.<br />
Each reflector measures 90x60cm (36x24”) making the reflector kit suitable<br />
for individual or group portraits. The fully adjustable reflector frame will fit<br />
on a standard Lighting Stands such as the (COR751) (not supplied).<br />
A single reflector can be held in position using the arm and bracket provided<br />
in the kit or use the centre section to bounce reflected light back under the<br />
chin of the model.<br />
INT295|90x60cm (36x24”)|x1 gold/Silver|x2 Sunlight/Silver<br />
ACCES
SORIES<br />
Colours included<br />
White Silver Gold Black Translucent<br />
These new 5 in 1 reflector panels are designed with a twist lock central crossbar to enable a<br />
quick and portable solution with interchangeable double sided panels. The frame is made<br />
from strong lightweight aluminium with special folding sections to allow easy storage with the<br />
minimum of effort.<br />
Each reflector panel is held in place by strong Velcro edge strips for a secure grip. The heavy<br />
duty stand can be flat packed for easy storage or transportation and will hold the boom arm<br />
and panel in almost any position required.<br />
The reflector can be used hand held thanks to the central locking hand rail which also allows<br />
the reflector to be quickly dismantled without the need of removing the cover.<br />
INT305|150cm x 200cm (59” x 79”) Large<br />
INT304|100cm x 150cm (39” x 59”) Medium<br />
Each panel kit contains: Panel frame and 5 surfaces, including Black/Sunfire, Silver/White<br />
and a 1 /2 stop translucent diffuser panel and a zip up bag for storage.<br />
INT303|Flexi-lite Panel and Stand Kit<br />
150cm x 200cm Panel Kit + Stand and Boom Arm<br />
INT306|“C” Stand Only 290cm (117”)<br />
INT307|Boom Arm only 100cm (39”)<br />
INT308|“C” Stand and Boom Arm only<br />
FLEXI-LITE 5in1 PANEL AND KITS<br />
Stand min height 1.4 mtrs (55”). Max 2.9 mtrs (114”). Weight 8kgs (16.5lbs). Metal<br />
construction with shock resistant spring loaded tubes. Maximum weight capacity without<br />
the boom arm 10 kgs (20 lbs). With the boom fully extended MAXIMUM 3 kgs (6lbs). The<br />
stand can be used as a lighting stand to hold large sized heads with a softbox.<br />
Reflectors • Accessories<br />
Hand held<br />
35
36<br />
5in1 REFLECTORS<br />
Probably the most underestimated piece of gear in th kit bag, ideal for photographers on<br />
the move and where space is paramount.<br />
The 1 /2 f stop translucent reflector is easily converted by a zip on overlay sleeve which<br />
allows four additional surfaces to be used: Gold, Silver, Black and White.<br />
The Gold, Silver and White surfaces fill in reflected light in to shadow area by up to<br />
1 F stops whilst the black will detract up to 11 /2 F stops to improve contrast in the shadow<br />
areas. Ideal for use by portrait and wedding photographers.<br />
All reflectors are supplied with a strong zipped carry pouch.<br />
INT222|56cm (22”) 5 in 1 Reflectors<br />
INT232|82cm (32”) 5 in 1 Reflectors<br />
INT265|107cm (42”) 5 in 1 Reflectors<br />
COLLAPSIBLE REFLECTORS<br />
<strong>Interfit</strong> double sided collapsible reflectors offer the ideal solution to the control of<br />
reflected light.<br />
Made from high quality materials, the round reflectors are available in a choice of<br />
four sizes and four colour combinations including Soft Sun/White, Sunlight/White,<br />
Silver/White and Silver/Gold and a Translucent for contrast reduction.<br />
Item size Colour shape<br />
INT230 |30cm (12”) |Soft Sun/white |Round<br />
INT231 |56cm (22”) |Soft Sun/white |Round<br />
INT233 |82cm (32”) |Soft Sun/white |Round<br />
INT234 |107cm (42”) |Soft Sun/white |Round<br />
INT275 |30cm (12”) |Translucent |Round<br />
INT276 |56cm (22”) |Translucent |Round<br />
INT277 |82cm (32”) |Translucent |Round<br />
INT278 |107cm (42”) |Translucent |Round<br />
INT236 |30cm (12”) |Silver/white |Round<br />
INT237 |56cm (22”) |Silver/white |Round<br />
INT268 |82cm (32”) |Silver/white |Round<br />
INT238 |107cm (42”) |Silver/white |Round<br />
INT246 |30cm (12”) |Silver/gold |Round<br />
INT247 |56cm (22”) |Silver/gold |Round<br />
INT267 |82cm (32”) |Silver/gold |Round<br />
INT248 |107cm (42”) |Silver/gold |Round<br />
INT298 |127x152cm (50x60”) |Soft Sun/white |Rectangular<br />
INT299 |102x168cm (40x66”) |Soft Sun/white |Rectangular<br />
EASY-gRIP REFLECTORS<br />
These rectangular folding reflectors with their easy grip handle offer<br />
the perfect solution to the quick and effective control of reflected<br />
light, both in the studio and out on location. Available in a choice of<br />
three combination surfaces. Ideal for wedding and outdoor portrait<br />
photographers, to add up to 1 f stop of reflected light on the subject.<br />
INT225|90x60cm (36x24”)|Sunlight/white<br />
INT226|90x60cm (36x24”)|gold/Silver<br />
INT227|90x60cm (36x24”)|Silver/white<br />
INT228|90x60cm (36x24”)|Translucent<br />
Accessories • Reflectors<br />
ACCES<br />
Colours available<br />
Sunlight/White<br />
Silver/White<br />
Silver/Gold<br />
Translucent
SORIES<br />
The Italian designer background collection is an artistic range featuring mild and strong contrasts between the<br />
patterns, to create the perfect atmosphere. Made from 100% top quality cotton they are designed to meet the<br />
utmost requirement of Professional photographers. Machine washable at 30 degrees and any creases can be<br />
steam ironed out as required. Easy to fold and use with <strong>Interfit</strong> COR755/ COR756/ COR760/ COR761 background<br />
support stand systems. Each is supplied in a self-coloured carry bag for easy storage.<br />
INT500 INT510 INT520 INT530 INT540 INT550<br />
INT555 INT560 INT570 INT580 INT585 INT590 INT595<br />
Available in two sizes: Small 2.90 x 3m (10’ x 10’), Large 2.90 x 6m (10’ x 20’)<br />
When ordering please specify (S) for Small or (L) for Large, ie. INT500S or INT500L from <strong>your</strong> dealer.<br />
Supplied in a self-coloured drawstring storage bag.<br />
DOUBLE SIDED COLLAPSIBLE<br />
INT720|Chromakey<br />
INT722|Black/white<br />
Size: 1.5m x 2m (59” x 79”)<br />
Use with INT290 support stand.<br />
Easily transported for use in the home or studio.<br />
MASTER’S MUSLINS BACKgROUNDS<br />
Turin<br />
Rome<br />
DESIgNER ITALIAN BACKgROUNDS<br />
Sienna<br />
Venice<br />
Verona<br />
White<br />
Turin Sienna Verona Pisa genoa Rome Venice white Black Chr/green<br />
Small INT740 INT742 INT744 INT752 INT746 INT748 INT750 INT760 INT759 INT723<br />
Large INT741 INT743 INT745 INT753 INT747 INT749 INT751 INT728 INT727 INT726<br />
Small Size: 2.4m x 2.7m (8’ x 9’). Use with COR755 support stand.<br />
Large Size: 3.16m x 5m (10.4’ x 16’). Use with COR756 support stand.<br />
Master backgrounds are sprayed with a anti-reflective coating and oven baked for durability and long life.<br />
Machine washable for ease of use.<br />
Pisa<br />
Black<br />
Backgrounds • Accessories<br />
Genoa<br />
Chrome Green<br />
37
38<br />
PROSoftboxes<br />
A range of fifteen professional quality softboxes, manufactured from the very best materials. The internal rods are<br />
made from strong flexible carbon steel or duralumin with rounded tops for maximum protection; the fabrics are made<br />
from specially treated polyester and are ‘heat resistant up to 400ºC/752ºF’. The highly reflective silver base produces<br />
an even edge to edge distribution of light. The two layers of high quality diffusion are non fluorescent UV coated<br />
preventing them from yellowing.<br />
With both diffusers in place a maximum light loss of only 1.2 f stops is achieved. Or you can remove the internal diffuser for<br />
additional versatility the light is focused in the center of the box with light dissipated towards the outside edge. The front<br />
recessed diffuser can also be removed to increase contrast which also creates a pleasing center weighted effect in portraits.<br />
Four shapes of box are available with a range of narrow profiles and sizes for each shape. The <strong>Interfit</strong> Pro Soft Box range is<br />
designed to fit onto the majority of studio flash units and each box requires a Speedring from a choice of thirteen speed<br />
rings.<br />
RECTANgULAR PRO SOFTBOXES<br />
RSBR685 |Rectangular Softbox| |60cm w x 85cm h x 40cm d (24x33x16”)|0.9kg/2lbs|-1 f stop<br />
RSBR7510 |Rectangular Softbox| |75cm w x100cm h x 41cm d (30x39x16”)|1kg/2.2lbs|-1 f stop<br />
RSBR8511 |Rectangular Softbox|85cm w x110cm h x 43cm d (33x43x17”)|1.1kg/2.4lbs|-1.2 f stop<br />
RSBR912 |Rectangular Softbox|90cm w x120cm h x 43cm d (35x47x17”)|1.2kg/2.6lbs|-1.2 f stop<br />
RSBR1014 |Rectangular Softbox|100cm w x 140cm h x 54cm d (39x55x20”)|2kg/4.4lbs|-1.2 f stop<br />
RSBR1420 |Rectangular Softbox|140cm w x 200cm h x 54cm d (55x79x21”)|2.4kg/4.8lbs|-1.2 f stop<br />
Rectangular Softboxes are widely used in fashion and product photography as the speed ring allows you to<br />
rotate the box to adjust the shape of light. Some rectangular softboxes are used in the <strong>Interfit</strong> Stellar Halogen<br />
range of kits. Maximum Light loss=1 stop with both baffles inserted, except RSBR8511 or above which are<br />
1.2 stops.<br />
HONEYCOMB gRID<br />
SqUARE PRO SOFTBOXES<br />
SSBR60|Square Softbox| |60cm w x 60cm h x 37cm d (24x24x15”)|1.3kg/2.9lbs|-1 f stop<br />
SSBR80|Square Softbox| |80cm w x 80cm h x 39cm d (32x32x15”)|1.6kg/3.5lbs|-1 f stop<br />
SSBR100|Square Softbox|100cm w x100cm h x 42cm d (39x39x17”)|1.9kg/4.2lbs |-1.2 f stop<br />
All <strong>Interfit</strong> Pro Softboxes are heat resistant up to 400ºC or 752ºF. Manufactured only from the very best<br />
materials. These square softboxes are standard equipment with Stellar Halogen 1000 & 1300 Kits. The<br />
square softbox is the most commonly used the world over as it’s a good all round softbox for general<br />
usage. Maximum Light loss=1 stop with both baffles inserted, except SSBR100 which is 1.2 stops.<br />
A range of accessories is available to control<br />
the shape of the light falling on the subject. The<br />
honeycomb grid stops stray light from falling on the<br />
background and controls foreground lighting. The<br />
circular mask creates a shapely catch light in the eye<br />
whilst the strip mask will act as a narrow beam on<br />
<strong>your</strong> subject.<br />
Accessories • Softboxes<br />
HONEYCOMB gRID<br />
SSBR60 HCG RSBR912 HCG<br />
SSBR80 HCG RSBR1014 HCG<br />
SLBR39 HCG PSOR60 HCG<br />
RSBR685 HCG PSOR90 HCG<br />
RSBR7510 HCG PSOR120HCG<br />
ACCES
SORIES<br />
STRIP PRO SOFTBOXES<br />
SSBR39 | Strip Softbox | | 30cm w x 90cm h x 34cm d (12x35x13”)| 0.8kg/1.7lbs| -1 f stop<br />
SLBR412 | Strip Softbox | | 40cm w x120cm h x 37cm d (16x47x15”)| 1.4/3lbs| -1 f stop<br />
SLBR510 | Strip Softbox | | 50cm w x100cm h x 34 cm d (20x39x13”)| 1.5kg/3.3lbs| -1.1 f stop<br />
SLBR612 | Strip Softbox | | 60cm w x120cm h x 39cm d (24x47x15”)| 1.6kg/3.5lbs| -1.1 f stop<br />
SLBR7190 | Strip Softbox |70cm w x190cm h x 40cm d (28x75x18”)|1.9kg/4.2lbs|-1.1 f stop<br />
Strips can be used in a variety of ways, producing a much narrower band of light when compared to the<br />
Octobox. The strip is a useful tool for creating side lighting for full length fashion or portraits. Or it can be used<br />
on a boom arm for a soft hair light.<br />
By removing the internal and external baffles high contrast lighting can be achieved for dramatic images<br />
when combined with any other <strong>Interfit</strong> boxes, or it can be used as a large reflector creating a special<br />
illumination effect. Some <strong>Interfit</strong> Stellar Halogen Kits feature Strip boxes. Maximum light loss=1 stop with<br />
both baffles inserted, except SLBR510/612 which are 1.1 stops.<br />
OCTOBOX PRO SOFTBOXES<br />
PSOR60 | Octobox Softbox | | 60cm w x 60cm h x 27cm d (24x24x11”)| 2.3kg/5.1lbs| -1 f stop<br />
PSOR90 | Octobox Softbox | | 90cm w x 90cm h x 35cm d (35x35x14”)| 2.5kg/5.5lbs| -1 f stop<br />
PSOR120 | Octobox Softbox |120cm w x 120cm h x45cm d (47x47x18”)|2.9kg/6.3lbs|-1 f stop<br />
PSOR200 | Octobox Softbox |200cm w x 200cm h x 60cm d (75x75x24”)|3.1kg/6.6lbs|-1.2 f stop<br />
The Octobox creates a different approach to <strong>your</strong> lighting. The Octobox is the perfect answer for portrait or<br />
fashion work as the light delivered from the eight sided box wraps around the subject to produce an even<br />
spread of light.<br />
The external diffuser softens skin tones tones whilst whilst the the internal baffles baffles eliminate hotspots and specular highlights<br />
and produces an even head to toe illumination of the subject. Maximum Light loss=1stop with both baffles<br />
inserted. Produces an excellent “Catch Light” in in the eye. And can be used successfully with the the <strong>Interfit</strong> Portrait<br />
reflector kit to create a simple but effective “Butterfly Lighting”.<br />
SPEEDRINgS<br />
To fit a softbox to a head you will need to know the fitting type. If it is an <strong>Interfit</strong> ‘S’ Type head use a ASA1000 ring (‘S’ Type<br />
fitting). For additional manufacturers please see below.<br />
Fitting Compatible with<br />
ASA1000|<strong>Interfit</strong> Stellar, Stellar X, Stellar XD, Extreme,<br />
SXT3200, Venus, Pro, Bowens, All S Type,<br />
Photoflex, westcott, Impact VS,<br />
Strobies XS Brackets<br />
ASA1002|Broncolor<br />
ASA1003|Speedatron<br />
ASA1004|Photogenic<br />
ASA1005|white Lighting<br />
ASA1006|Multiblitz , Profilux<br />
ASA1002 & ASA1005 cannot be fitted to Vistaec or Ultra<br />
ANATOMY OF A SOFTBOX<br />
Speedring<br />
Rod location holes<br />
Forming Rods<br />
Fitting Compatible with<br />
ASA1007|Hensel<br />
ASA1008|<strong>Interfit</strong> EX range, Elinchrom<br />
ASA1009|Balcar, 2008> white Lighting,<br />
Alien Bees<br />
ASA1010|<strong>Interfit</strong>, Colorflash<br />
ASA1011|Novatron<br />
ASA1012|JTL<br />
ASA1013|Profoto<br />
ASA1014|Multiblitz Varilux<br />
ASA1015|Broncolor/Pulso 9<br />
Speedring Mounting lugs Outer cover (black)<br />
Inner reflective surface<br />
(silver)<br />
Inner scrim/diffuser panel<br />
Outer scrim<br />
Velcro welt<br />
Softboxes • Accessories<br />
39
LIgHT TENTS<br />
LIgHT TENT<br />
FOLDINg PHOTOBOX<br />
The Photobox folds flat into a 50cm square portfolio<br />
style carry case. It quickly opens up to a 50cm cube style<br />
table top studio ideal for photographing small ‘still life’<br />
and product pictures. The white perspex sides and top<br />
efficiently diffuse flash or tungsten light, leading to very<br />
soft lighting effects. The Photo Box is supplied complete<br />
with a removable blue background cloth.<br />
INT310|Folding Photobox|50x50cm (20x20”)<br />
POP UP LIgHT TENT<br />
40 Accessories • Light Tents<br />
The Studio Light Tent offers an inexpensive yet highly<br />
effective means of photographing slightly larger objects,<br />
with the option of using interchangeable backgrounds.<br />
INT296|Light Tent|60x60x60cm (24x24x24”)<br />
The easy way to control both shadows and reflections. Each<br />
tent is supplied with a BLACK and a WHITE background cloth<br />
which is held in place by Velcro strips to facilitate easy removal<br />
or changing of the background. These can also be used to<br />
create a template of <strong>your</strong> choice. A removable front panel<br />
allows for further control of reflections when photographing<br />
reflective subjects. Each tent collapses down to fit into the<br />
circular zipped bag supplied. Also available in kit form with<br />
either Tungsten or with the daylight balanced Cool-Lite’s.<br />
INT315|60x60cm (24x24”)<br />
INT316|90x90cm (24x24”)<br />
INT317|120x120cm (48x48”)<br />
ACCES
SORIES<br />
INT349|Studio Table Top Large<br />
Dimensions 65cm h x 65cm w x 65cm d (251 /2 x 251 /2 x 251 INT349|Studio Table Top Large<br />
1 1 1<br />
/2 x 25 /2 x 25 /2”)<br />
INT350|Studio Studio Table with extension legs<br />
INT351|Studio Studio Table extension legs only<br />
Extension legs 60cm (24”). Turns the Table Top Studio<br />
into a free standing unit.<br />
STUDIO TABLE<br />
Fully collapsible, the Table Top Studio can be assembled in<br />
minutes and positioned for use on an office desk or table.<br />
It is ideal for product and still life photography.<br />
Its matt opaque non-reflective surface can be illuminated<br />
from both underneath & behind when required.<br />
LED STUDIO TABLE<br />
INT399|Portable LED Studio Table<br />
With 200 LED panel. Table flexi-arm and power pack.<br />
Dimensions 24cm h x 40cm w x 34cm d (9.5x16x13.5”)<br />
Studio Table • LED Studio Table • Accessories<br />
41
BACKgROUND SUPPORT SYSTEMS<br />
Designed to support either textile or paper roll<br />
backgrounds. Each system comes complete with two<br />
stands, a three section cross pole and a strong carry bag.<br />
The cross pole comes in three sections it is possible to<br />
remove the centre section to reduce the width of each<br />
cross pole by 1mtr (39”) making use of just the two end<br />
sections for small paper rolls in confined spaces.<br />
Item No Max Height Width Weight<br />
COR755 |2.4m (94”) |2.5m (98”) |2.5kg<br />
COR756 |2.6m (102”) |3.15m (124”) |3kg<br />
TELESCOPIC CROSS POLE<br />
SUPPORT SYSTEMS<br />
As above but with an adjustable telescopic centre pole section<br />
COR760 |2.4m (94”) |2.5m (98”) |2.5kg<br />
COR761 |2.6m (102”) |3.15m (124”) |3kg<br />
PORTAPROP KIT<br />
ACCESSORIES<br />
Ideal for mounting paper or vinyl rolls for the mobile studio<br />
photographer where a standard background support system<br />
would not be practical.<br />
COR762|Portaprop Kit<br />
2 x Portaprop poles<br />
2 x hanger systems<br />
2 x brake expans<br />
2 x chain and weights<br />
42 Accessories • Background Support Systems<br />
wALL MOUNTINg KIT<br />
FOR PAPER ROLLS<br />
A complete wall mounting kit for paper backdrops. Simple<br />
DIY instillation allows you to use full width paper backdrops<br />
in the studio or a garage. Must be fixed to solid walls only.<br />
INT312 | wall Mounting Kit for Paper Rolls<br />
2 x wall brackets<br />
2 x paper holders (brake & chain)<br />
3 x colour coded chains and weights<br />
4 x wall studs<br />
wALL MOUNTINg<br />
BOOM ARM<br />
Wall Mounted Boom Arm Kit ideal for<br />
removing Lighting Stands from the floor. DIY<br />
installation. Must be fixed to solid walls only.<br />
INT309|wall Mounting Boom Arm
STR100 PORTRAIT KIT<br />
STR102 | Beauty Dish<br />
STR100 | Portrait Kit<br />
1 x Beauty Dish<br />
1 x Globe Diffuser<br />
1 x Softbox (white)<br />
1 x Barndoor Set<br />
1 x Snoot<br />
1 x Honeycomb (STR107)<br />
Just add flex mounts to complete the kit.<br />
Each individually tailored to fit <strong>your</strong> flashguns.<br />
Each of the items are available separately<br />
44 STR100 Portrait Kit<br />
The Portrait kit has been designed to enhance <strong>your</strong> <strong>creativity</strong> both<br />
indoors or outdoors by using <strong>your</strong> Speedlites to give you every<br />
opportunity to create stunning images.<br />
When using the Beauty Dish or Softbox in front of <strong>your</strong> model this<br />
softens the lighting for the most pleasing effects.<br />
The Globe Diffuser is ideal for large group shots for Wedding or Mobile<br />
Portrait photographers for bouncing light in almost all directions to<br />
produce a beautiful soft light. The Barndoors, Snoot and Honeycomb can<br />
be used as a background light or to add a fill light into <strong>your</strong> portraits.<br />
STR103 | globe Diffuser<br />
To add some extra drama to <strong>your</strong> images consider purchasing<br />
the EFX kit for the total package in a mobile studio.<br />
STR104 | Soft white Inside Softbox<br />
STR105 | Barn Door STR106 | Snoot STR107 | 20º Honeycomb grid<br />
STR108 | 30º Honeycomb grid<br />
Strobies lighting accessories are the ideal answer for the<br />
mobile photographer. These lightweight and portable<br />
units are simple to put together by using a Flex Mount on<br />
<strong>your</strong> flashgun. You can easily swap between the Beauty<br />
Dish or the Globe Diffuser in seconds.<br />
Each item in the Portrait kit uses a Flex Mount (available<br />
separately) which ‘requires no glue, velcro or rubber<br />
bands’ to make a secure fit on <strong>your</strong> flashgun.
Strobies are based around a Flex Mount. Each is especially<br />
designed to fit a flash gun, each unit can then be hot swapped<br />
on the special clip system.<br />
The Flex mounts do not require any glue, rubber bands or Velcro to<br />
enable it to fit correctly.<br />
The Flex mount fits snug and tight so it will not fall off if the unit is<br />
inverted. The unique unique design offers most types of mobile mobile photographers<br />
virtually hassle free studio lighting now you really can use <strong>your</strong> full<br />
<strong>creativity</strong> with hotshoe mounted flashguns.<br />
It is the the ideal answer to lighting on the move, offering flexibility both<br />
indoors and outdoors, having all the ingredients to allow you to be<br />
creative in many new and exciting ways.<br />
Fitting a Flex Mount could not be simpler. The Flex Mount is<br />
correctly fitted when the flash gun cannot be pushed<br />
Any further inside the flex mount and is flush with the<br />
central hole of the Flex Mount.<br />
Colour gels gels may be fitted inside the Flex Mount Mount including<br />
manufactures manufactures “white “white balance filters”. You do not need to<br />
use any glue, rubber bands or velcro when using Strobies<br />
Flex Mount. In the images above above you can clearly see the<br />
front mounting mounting clips for use use with Strobies Strobies products, products, these<br />
allow you to change from a Beauty Dish to a Snoot in seconds.<br />
SgM100 | Nikon SB600/SB800<br />
SgM200 | Sony F32X/Canon 430EX<br />
SgM300 | Sony F56AM/Nikon SB26/27/28<br />
SgM400 | Canon 580EX/550EX<br />
SgM500 | Vivitar 285 HV<br />
SgM600 | Nikon SB900 (without filter draw attached)<br />
SgM600F | Nikon SB900 (with colour filter draw attached)<br />
SgM700 | Canon 580EXMKII<br />
SgM800 | LumoPro LP160/ProMaster<br />
SgM900 | Nikon SB700<br />
Please check out our website for an<br />
up-to-date fittings list at<br />
www.interfitphotographic.com<br />
Flex Mount<br />
FLEX MOUNT<br />
Please note the Flex Mounts are shown<br />
in white for illustration purposes to<br />
demonstrate fittings etc.<br />
45
STR101 EFX KIT<br />
STR101|Portrait Kit<br />
2 x Honeycomb Grids with 20 Degree & 30 Degree<br />
1 x Snoot<br />
1 x Bounce Card Set<br />
1 x Velcro Strap<br />
1 x Honeycomb Bounce Tube<br />
The EFX Kit is the perfect addition to the Portrait Kit. By adding the<br />
additional items in this kit you will soon create drama inducing side<br />
lighting to <strong>your</strong> portraits.<br />
By using the two honeycombs with the Flex Mounts you can create<br />
highlights on the side of the face of <strong>your</strong> model. The snoot or bounce<br />
tube can be used as a hair light to produce unlimited effects and light<br />
on the back of the hair. The Honeycomb could be <strong>your</strong> background light.<br />
For smaller spot light on the background why not use the “Velcro on”<br />
Honeycomb and bounce tube together.<br />
46 STR101 EFX Kit • STR109 Bounce Kit<br />
For product photography the EFX kit comes into its own by using the<br />
snoot you can highlight the smallest details which can be used with or<br />
without the front honeycombs to guide the light forward.<br />
In addition you could use the Flex Mount honeycombs to create a wide<br />
area spot concentrated on the background or the subject.<br />
STR106 | Snoot STR107 | 20º Honeycomb grid STR108 | 30º Honeycomb grid<br />
A bounce card set is included in the STR101 kit<br />
STR109|Bounce Set<br />
The Bounce Set is ideal for creating that definitive spot<br />
light on the background or when using the bounce<br />
card for a characteristic catch light in the eye. The<br />
Honeycomb can be combined with either the bounce<br />
card or tube, and is the essential tool for guiding the<br />
light on the background. By using a Velcro strap around<br />
<strong>your</strong> flash you can mix and match each item together<br />
for quick and easy results. Each will fit in <strong>your</strong> kit bag<br />
with ease, ideal for indoors or outdoors use.
INT334|Strobies Strobies XL Softbox 40cm x 40cm (16x16”) and bracket kit<br />
STR127|Strobies Strobies XL Softbox 60cm x 60cm (24x24”) and bracket kit<br />
The The Stobies XL series is ideal for mobile photographers<br />
wanting a quick and portable solution to studio lighting<br />
on the move. Simply fit <strong>your</strong> flashgun into the provided<br />
shoe shoe with the head inserted inside the softbox to to<br />
provide a softer quality of light.<br />
Ideal Ideal for wedding and event or outdoor photographers.<br />
Each kit is supplied with two shoe fittings for standard standard<br />
flashguns and a Nikon SB900 new generation generation shoe. Also<br />
including including a rotating ball bracket to allow the softbox to<br />
be tilted in in multiple directions, and a handy all-in-one<br />
kit bag for storage of the kit.<br />
Fits directly on to to a standard Lighting Stands such such as a<br />
COR750 or COR751 or can be used with a Strobies Strobies Boom<br />
arm INT333 for overhead overhead lighting when combined with<br />
a reflector to create beautiful quality portraits.<br />
Available Available in two sizes 40cm (16”) or 60cm (24”). (24”).<br />
Please note some flashguns such as as large large headed units units<br />
like the Vivitar 285 do not fit inside the opening. Here<br />
we we recommend using a Flex Mount and the Strobies<br />
softbox (STR104) as an alternative.<br />
For Nikon and Canon Flashguns.<br />
Portabox is easy to store in <strong>your</strong> kitbag and ready in seconds for that<br />
perfect shot. Simply take the Portabox out of it’s supplied zip-up carry<br />
case, attach it to <strong>your</strong> flash gun with the easy grip rubberised sides and<br />
wrap around around the elasticated velcro strap.<br />
XL Softbox • Portabox<br />
XL SOFTBOX<br />
PORTABOX<br />
Each Portabox is supplied with a a zip-up carry case for<br />
easy storage and and transportation.<br />
STR150|STR151 STR152|STR153 STR154|STR155<br />
STR150|Strobies Strobies Portabox 30cm x 20cm (12x8”) Canon 580EX/Nikon SB600/SB800<br />
STR151|Strobies Strobies Portabox 30cm x 20cm (12x8”) Canon 580EX11/Nikon SB900<br />
STR152|Strobies Portabox 22cm x 16cm (9x6”) with window for Canon 580EX/Nikon SB600/SB800<br />
STR153|Strobies Portabox 22cm x 16cm (9x6”) with window for Canon 580EX11/Nikon SB900<br />
STR154|Strobies Portabox snoot for Canon 580EX/Nikon SB600/SB800<br />
STR155|Strobies Portabox snoot for Canon 580EX11/Nikon SB900<br />
47
STR180|Modi-Lite Kit<br />
Transparent<br />
Educational Training<br />
MODI-LITE KIT<br />
wITH UNI-MOUNT<br />
gold Silver Reflector Clip-in Honeycomb<br />
Red gel Transparent gel Tungsten gel Blue gel Yellow gel<br />
Bare Softbox Softbox Snoot Barndoor Set<br />
Included<br />
BEAUTY DISH AND ACCESSORIES<br />
48 Modi-Lite<br />
COLOUR DIFFUSER<br />
SOFTBOX, SNOOT AND BARNDOORS<br />
Uni-Mount Diffuser globe<br />
Honeycomb
BEAUTY DISH AND ACCESSORIES<br />
The standard reflector is a multi purpose design allowing<br />
the beauty dish and honeycomb to snap into place in<br />
seconds.<br />
The beauty dish is ideally placed around four feet from the<br />
subject either camera mounted or on a boom arm.<br />
COLOUR DIFFUSER<br />
Supplied with transparent SNAP on disc to allow light to<br />
pass though or interchangeable with soft gold for a warm<br />
tone or silver for neutral looking effects.<br />
The honeycomb is ideal to create spot lights and can be<br />
used with colour gels.<br />
SOFTBOX, SNOOT & BARNDOORS<br />
UNI-MOUNT<br />
STR190|<br />
STR187|<br />
The colour diffuser supplied enables multiple light patterns<br />
to <strong>your</strong> background. The transparent diffuser also makes an<br />
excellent neutral light source.<br />
The Softbox can be used directly on camera or off camera,<br />
with or without it soft cover for high contrast lighting.<br />
The Snoot supplied with two honeycombs, add additional<br />
effects to the background or direct light to a small spot.<br />
Barndoors fit directly in to the Uni-Mount to provide a soft<br />
uniform light pattern, used in many ways from portraits to<br />
backgrounds.<br />
The Globe Diffuser is ideal for large group shots for<br />
Wedding or Mobile Portrait photographers for bouncing<br />
light in almost all directions to produce a beautiful soft<br />
light.<br />
The Strobies Uni-Mount is able to fit a wide range of<br />
Manufacturer’s Speedlites from Nikon, Sony, Canon, Metz,<br />
Nissin and many more. With a unique locking mechanism<br />
it offers a strong and fast process for fitting the Modi-Lite<br />
system to <strong>your</strong> flashgun. Simply twist the thumb screws to<br />
lock on to <strong>your</strong> flashguns without the need for additional<br />
fixing tabs, rubber bands or velcro.<br />
STR180|Modi-Lite kit contains<br />
STR181|Snoot with 2 honeycomb diffusers<br />
STR182|Diffuser globe<br />
STR183|Barndoor set.<br />
STR184|Clip-in honeycomb (use with STR186)<br />
STR185|Softbox 30cm x 21cm (12” x 8”)<br />
STR186|Reflector/Beauty Dish<br />
STR187|Set of 5 clip-in gels<br />
STR188|Honeycomb<br />
STR190|Uni-Mount<br />
All products are available separately.<br />
STR186|STR184<br />
The tungsten diffuser allows you to work with a tungsten<br />
light source and flash at the same time or as a creative light<br />
source at 3200k.<br />
STR190|Uni-Mount<br />
STR181|STR183|STR185<br />
The Strobies Uni-Mount is able to fit a wide range of<br />
Manufacturer’s Speedlites from Nikon, Sony, Canon, Metz,<br />
Nissin and many more. With a unique locking mechanism<br />
it offers a strong and fast process for fitting the Modi-Lite<br />
system to <strong>your</strong> flashgun up to a maximum size of 58 to<br />
78 mm with a minimum grip of 30 mm. Simply twist the<br />
thumb screws to lock on to <strong>your</strong> flashguns without the<br />
need for additional fixing tabs, rubber bands or Velcro.<br />
Minimum Grip Size 30mm<br />
Please note these products can not be fitted to the Strobies<br />
Flex mounts but may be used in addition to the range for<br />
lighting.<br />
Each Uni-Mount can take a flashgun up to 58 x 78 mm<br />
maximum external sizes. Minimum grip size 30mm.<br />
Please note these products can not be fitted to the Strobies<br />
Flex mounts but may be used in addition to the range for<br />
lighting.<br />
58mm x 78mm<br />
Maximum grip<br />
Modi-Lite<br />
30mm x 78mm 78mm<br />
Minimum grip<br />
49
STR168|Rapida 8<br />
The Rapida 8 Octobox is a remarkable simple softbox using the same<br />
high quality materials as the <strong>Interfit</strong> Pro Range of softboxes.<br />
Highly portable thanks to the innovative speed lugs and fittings on the<br />
Speedring allows the softbox to be stored away in seconds in its supplied<br />
carry bag. To use simply pull the rods into place until they click in the<br />
speedring allowing a rapid set up time to be used.<br />
Can be used with almost any Speedlite with the exception of Sony/Minolta<br />
flashguns. 46cm (18”) folded 30cm x 16cm (12” x 6.5”)<br />
Simple to use, and fold away<br />
1 Simple to attach to almost any hotshoe flashgun with a (Standard ISO hotshoe<br />
only) (not Sony/Minolta)<br />
2 Open out the Octobox by simply clicking the rods in to place around the<br />
pre-assembled speedring.<br />
3 Attach to a Lighting Stands and you’re ready to go.<br />
4 To fold away simply squeeze either of the two lugs on the outside of the speedring,<br />
the Rapida 8 instantly folds away ready to store as shown below.<br />
STR169|Rapida Stripbox<br />
The Rapida Stripbox is a remarkable simple softbox using the same high quality materials as the <strong>Interfit</strong> Pro Range of<br />
softbox. Highly portable thanks to the innovative speed lugs and fittings on the Speedring allows the softbox to be stored<br />
away in seconds in its supplied carry bag. To use simply pull the rods into place until they click in the speedring allowing a<br />
rapid set up time to be used.<br />
Can be used with almost any Speedlite with the exception of Sony / Minolta flashguns.<br />
59cm x 29cm (23”x11”) and when folded 40cm x 16cm (16” x 6.5”)<br />
Simple to use, and fold away.<br />
50 Rapida 8 • Rapida Stripbox
MACRO RINg LIgHT<br />
The Macro Ring lite is a useful addition to the range offering both Flash and Continuous lighting for close up macro work.<br />
Each kit is supplied with six adaptor rings to screw on to <strong>your</strong> lens offering a secure fitting of the Ring lite; Adaptor rings<br />
supplied cover the most popular sizes of macro lens. 52mm, 55mm, 58mm, 62mm, 67mm,72mm.<br />
1. Simply attach the control unit to the Hotshoe of <strong>your</strong> camera.<br />
(Standard ISO hotshoes only) (Not Sony/Minolta)<br />
2. Connect the lead to the left hand side of the control unit and the other end to the ring light.<br />
3. Attach the correct sized adaptor ring to <strong>your</strong> lens.<br />
4. Carefully slide the Ring Light unit onto the adaptor ring.<br />
5. Make a choice of F = Flash or C = Continuous on the back of the Control unit.<br />
6. Adjust the power setting as required for correct exposure.<br />
7. Have fun experimenting with the Strobies Macro Ring Light.<br />
STR172|Macro Ring Light<br />
Macro Ring Light<br />
51
XS BRACKET<br />
The Strobies XS is a unique way to hold <strong>your</strong> flash gun and use it with a softbox, a large beauty dish or with almost any<br />
other “S” type fitting accessories available.<br />
A “7” reflector (as shown bottom left) is included with every XS bracket allowing you to add further accessories such as<br />
honeycombs or gel holders. One of the major benefits of the XS Bracket is its ability to rotate it’s shoe mount to enable<br />
<strong>your</strong> iTTL or eTTL port port to be visable visable to <strong>your</strong> <strong>your</strong> Infrared Infrared triggering system such as an an SU800, STE-2 or control/trigger flashgun. flashgun.<br />
In In addition to to the rotating shoe a second shoe can hold a radio receiver or a second flash gun should you desire to use the<br />
Strobies XS to hold an Umbrella in the Lighting Stands fitting fitting provided. Using 2 2 flashguns effectively doubles <strong>your</strong> output.<br />
A major benefit of this is to reduce <strong>your</strong> recycling time and preserve <strong>your</strong> batteries to enable longer usage times.<br />
A wide range of accessories are available to fit the<br />
Strobies XS bracket’s “S” type bayonet fitting, including<br />
the following items:<br />
Beauty dishes (RF5000)<br />
Softboxes (Any Pro range or Stellar Softbox up to 1mtr)<br />
Snoots (RF5006 or INT209)<br />
Honeycombs (AH6020, AH6030, AH6060).<br />
These fit directly into the included 7” reflector. You can<br />
also add the Stellar range of Barndoors (RB4001) and the<br />
colour gel set (AC8011) allowing you to add spot colour<br />
to <strong>your</strong> backgrounds.<br />
Snoots (INT209, RF5006).<br />
Any <strong>Interfit</strong> Umbrella can be fitted to the XS bracket via<br />
the Lighting Stands mounting bracket. When used with<br />
the standard reflector the light will fill the umbrella in a<br />
similar way as using a standard flash head.<br />
Single bracket with umbrella via light stand<br />
52 XS<br />
INT326|Single bracket<br />
with 7” reflector<br />
Shown with a beauty<br />
dish attached<br />
(not included)<br />
INT327|Bracket and softbox kit with stand<br />
40 x 40cm (16 x 16”) softbox<br />
7” reflector and Lighting Stand<br />
STR128 | Replacement shoe<br />
The replacement shoe enables the use<br />
of new larger foot flashguns such as<br />
the Nikon SB900 to be used with the<br />
XS brackets.
SUCTION CUP<br />
Simply undo the locking nut to raise the suction<br />
cup seal. Wet the cup and apply the unit to a<br />
solid surface, push the unit onto the surface<br />
and tighten the locking nut until a bond has<br />
been been formed between the suction cup and the<br />
solid surface.<br />
For best results results allow to settle for one hour hour<br />
before before using. Test for a firm bond before<br />
putting camera’s camera’s or flashguns on the suction suction<br />
cup mount, mount, if you you are are unsure of it it hold hold on the<br />
surface do not use, but re apply as above. In<br />
some cases you may may need to add additional additional<br />
tethering when required required for safety safety reasons. reasons.<br />
To To release the Suction cup, simply simply undo the<br />
locking nut whilst whilst holding the unit steady steady and and<br />
lift the release tab tab gently. Ensure that you hold<br />
the unit securely when releasing the tab.<br />
STR175|Suction Cup<br />
Boom Arm • Clamp • Suction Cup • Multi-Clamp<br />
ACCESSORIES<br />
BOOM ARM<br />
The Strobies Boom Arm has been developed with small hotshoe<br />
Speedlites in mind allowing the user to get the flash up high<br />
when required, with a maximum length of 140cm (56”) and a<br />
minimum 76 cm (30”) you will be able to use this in almost any<br />
position. A provided counterbalance sleeve enables you to add<br />
<strong>your</strong> own weights to the Boom Arm and fit the Arm to almost any<br />
standard Lighting stand.<br />
Shown with the Rapida Stripbox not not included.<br />
STR173|Boom STR173 Arm<br />
CLAMP<br />
Multi clamp is ideal for holding Speedlites or<br />
Cameras to most rounded surfaces, including guard<br />
rails pipe work and kitchen work tops and many<br />
more. Simply squeeze open the fixing and apply to<br />
the surface.<br />
A rubberized grip leaves no trace on most surfaces.<br />
We We recommend recommend fixing fixing the Multi Multi Grip to the surface surface<br />
first BEFORE attaching a Camera or Speedlite to<br />
ensure it can be held firmly to a chosen surface. If<br />
in doubt find another surface to attach attach too. Note<br />
Additional tethering may be required<br />
STR174 STR174|Clamp<br />
MULTI-CLAMP CLAMP<br />
Can be used on Bikes, Cars, Tables, Windows<br />
and most suitable surfaces. Allowing a strong<br />
platform for <strong>your</strong> Camera or Speedlite.<br />
Metal Construction Rugged clamping with<br />
multiple rubber grips Flat mounting plate<br />
for 1/4” tripods or light light stand fittings for the<br />
ultimate flexibility. Flexible ball head head with 1/4”<br />
mounting screw.<br />
Can be used or mounted on on most standard<br />
photographic products products Such Such as: Light Light stands stands<br />
Monopods Tripods Easy to use knobs, can be<br />
used used when wearing gloves.<br />
Easy to store in <strong>your</strong> camera bag or when<br />
travelling. Maximum supported<br />
weight 6kg. Speedlites and<br />
Cameras etc not supplied<br />
STR176|Multi-Clamp<br />
53
ACCESSORIES<br />
INT340|Pro clamp STR110| Large on<br />
camera diffuser<br />
STR118|Flexi<br />
Adapter Arm with<br />
Shoe Adapter<br />
STR114|Sony/<br />
Minolta Hotshoe<br />
adapter to standard<br />
ISO fittings<br />
STR141|Strobies Tri<br />
Shoe Adapter<br />
Fits on to STR117<br />
umbrella bracket<br />
holder. Allows up to 3<br />
flashguns to be<br />
mounted on a<br />
Lighting Stands<br />
STR115|Standard<br />
Hotshoe with P.C<br />
Adapter Sync Jack<br />
STR111|Small on<br />
camera diffuser<br />
STR145|Strobies Tri<br />
Shoe Adapter and<br />
bracket kit<br />
Allows up to 3<br />
flashguns to be<br />
mounted on a Lighting<br />
Stands. An umbrella<br />
mount is included.<br />
STR116|Hotshoe<br />
to Light Stands<br />
with 1 /4” female<br />
adapter<br />
54 Accessories<br />
STR112|Silver/<br />
white 30cm (12”)<br />
Reflector on camera<br />
small<br />
STR140|Single<br />
head Umbrella<br />
Bracket - Metal<br />
STR122|Silver/<br />
white 58cm 22”<br />
Reflector on camera<br />
Large<br />
HOTSHOE ADAPTERS HOTSHOE FITTINg<br />
BUBBLE LEVELS<br />
STR142|Fits Vertically or Horizontally in<br />
ISO standard camera hotshoes.<br />
STROBIES FLEX MOUNT FITTINg OCTOBOX<br />
STR144| Twin<br />
head Umbrella<br />
Bracket - Metal<br />
STR117|Umbrella<br />
Holder with Shoe<br />
Adapter<br />
INT337| Triple<br />
Flash Bracket with<br />
tilt handle<br />
STR143|Is a three<br />
way bubble level,<br />
ideal for Landscape<br />
and Architecture<br />
photographers.<br />
STR125 | Flex Mount Fitting Octobox<br />
A new addition to the Strobies Softbox range for OFF CAMERA use only. The 30cm<br />
(12”) Octobox produces quality lighting for portraits. Ideal for mounting on the<br />
Strobies Boom Arm (INT333) high above the model and using a reflector to bounce<br />
back lighting under the chin and eyes.<br />
Please note this product can not be fitted to the following Flex mounts,<br />
SgM100, 200, 300, 400.<br />
When used on camera this softbox is likely to cover part of the lens. <strong>Interfit</strong><br />
recommends that this is used as an off camera softbox on a bracket, lighting stand<br />
or boom arm.
STR120|Twin Umbrella Kit<br />
2 x Air-cushioned Lighting Stands<br />
2 x 36” Translucent/silver/black cover umbrellas<br />
2 x Umbrella mount brackets with shoe adapators<br />
1 x All in one bag<br />
MULTI-FIT TTL SYNC CORD<br />
Using an innovative pin configuration the Multi-fit TTL cord can be used<br />
with Nikon, Fuji and Canon cameras when used with manufacturer’s<br />
flashguns.<br />
The TTL cord allows you to maintain a link to <strong>your</strong> flashgun for lighting<br />
off camera. The cord is 10m (32’) ideal for using a secondary flashgun<br />
connected to <strong>your</strong> camera as a master unit to control <strong>your</strong> remote units at<br />
a greater distance.<br />
A screw thread is built in it and can be mounted on to a Lighting Stands<br />
to hold <strong>your</strong> flashgun. In addition you can fire two flashguns on the same<br />
cord in manual mode.<br />
STR131|Multi-fit TTL Cord<br />
Twin Umbrella Kit • Multi-fit TTL Cord<br />
ACCESSORIES<br />
TwIN UMBRELLA KIT<br />
The Strobies twin umbrella kit meets the demands of the<br />
mobile photographer needing a compact yet versatile<br />
kit. Idea for mobile studio set ups, for wedding event and<br />
portrait photographers.<br />
The kit features everything you need to meet <strong>your</strong> creative<br />
approach to lighting indoors or outdoors. With 2 high quality<br />
Lighting Stands and brackets <strong>your</strong> hotshore flash gun can be<br />
put through its paces with the umbrellas provided to achieve<br />
high quality lighting on the fly.<br />
This Strobies kit can be easily stored in the kit bag and ready<br />
to use in no time, with the two 36” umbrellas <strong>your</strong> flash guns<br />
will achieve a greater distribution of light on <strong>your</strong> subject<br />
than when compared to using the flash guns without any<br />
other modifiers.<br />
STR137|Multifit TTL Sync Cord<br />
MULTIFIT TTL CORD<br />
Using an innovative pin configuration the Multi-fit TTL cord<br />
can be used with Nikon, Fuji and Canon cameras when used<br />
with manufacturer’s flashguns.<br />
The TTL cord allows you to maintain a link to <strong>your</strong> flashgun<br />
for lighting off camera. The cord is 740mm (29”) when folded<br />
and can be used up to 2 metres (6 feet).<br />
With a screw thread is built in it can be mounted on to a light<br />
stand to hold <strong>your</strong> flashgun. In addition, you can fire two<br />
flashguns on the same cord in manual mode.<br />
55
<strong>Expanding</strong> <strong>your</strong> <strong>creativity</strong><br />
Studio lighting and accessories for strobes and speedlites<br />
UK:<br />
<strong>Interfit</strong> Photographic Ltd<br />
Unit 4, Cleton Business Park,<br />
Cleton Street,<br />
Tipton,<br />
West Midlands.<br />
DY4 7TR.<br />
Tel: +44 (0)121 522 4800<br />
Fax:+44 (0)121 557 2221<br />
Email: sales@interfitphotographic.com<br />
USA:<br />
<strong>Interfit</strong> Photographic ltd<br />
420 Industrial Court West,<br />
Villa Rica, GA30180<br />
Tel: 1-866-947-9796<br />
Fax: 1-866-990-8299<br />
Email: customerservice@interfitphotographicusa.com<br />
You Tube search for <strong>Interfit</strong> tv<br />
Facebook search search for <strong>Interfit</strong> Photographic<br />
www.interfitphotographic.com