ER/Studio - Embarcadero Technologies Product Documentation

TUTORIALS > COLLABORATIVE MODELING
7 When finished reviewing the changes, leave the change selected and then click OK.
The changes are saved to the Repository.
Checking Out at the Diagram Level
In some cases you may want access to the entire ER/Studio diagram. As an example you may need to derive a new
physical model from the logical. In this case you will need to check out the entire diagram.
1 With the Ordrers.dm1 diagram we used in the last session open, click Repository > Diagrams > Check Out
Diagram.
Now let’s generate a physical model.
2 Click Model > Generate Physical Model.
3 Enter a name for the physical model, choose the option to validate the model, and then click through the
Generate Physical Model Wizard, choosing other options you want.
TIP: You can click Finish at any time in the wizard to accept the defaults.
4 Click Finish.
The Model Validation Wizard appears.
5 In the Model Validation Wizard, choose the options you want and then click Run Validation.
An entirely new physical model has been generated as seen in the Data Model Explorer.
EMBARCADERO TECHNOLOGIES > ER/STUDIO® 8.0.3 USER GUIDE 399