WENZEL GENERAL CATALOG EN
Measurement technology has been our profession since 1968 and we have developed it to absolute perfection over the years. WENZEL stands for highest quality standards and reliability - without forgetting that only those who have their sights set on the future and their vision constantly in mind can survive. WENZEL offers numerous innovative solutions for measurement solutions for production, which we present here in this segment brochure. The shopfloor measuring technology has two main tasks: on the one hand it serves to monitor the process stability in the production and on the other hand the dimensional accuracy of the components. For testing the stability, fast but not quite as accurate solutions are often suffi cient: we at WENZEL offer you measuring arms with tactile and optical sensors and comparators such as the Equator from Renishaw. However, ensuring dimensional accuracy still requires highly accurate measuring equipment. We at WENZEL offer you our own range of SF solutions for this purpose. With the SF 55, 87 and 1210 we cover a wide range with which we can meet a great many requirements. These machines differ from our “classical” measuring machines mainly by a higher robustness regarding temperature variation and environmental conditions like dirt and vibrations. All solutions from WENZEL are available with different tactile and optical sensors and are optimally operated by our own software. Our high quality demands on the machines should also be demonstrated by our users: simple operation despite a deep functional diversity - WENZEL is your long-term partner for today and tomorrow. Enjoy reading and challenge our fl exibility: we are ready to be there for you!
Measurement technology has been our profession since 1968 and we have developed it to absolute perfection over the years. WENZEL stands for highest quality standards and reliability - without forgetting that only those who have their sights set on the future and their vision constantly in mind can survive. WENZEL offers numerous innovative solutions for measurement solutions for production, which we present here in this segment brochure. The shopfloor measuring technology has two main tasks: on the one hand it serves to monitor the process stability in the production and on the other hand the dimensional accuracy of the components. For testing the stability, fast but not quite as accurate solutions are often suffi cient: we at WENZEL offer you measuring arms with tactile and optical sensors and comparators such as the Equator from Renishaw. However, ensuring dimensional accuracy still requires highly accurate measuring equipment. We at WENZEL offer you our own range of SF solutions for this purpose. With the SF 55, 87 and 1210 we cover a wide range with which we can meet a great many requirements. These machines differ from our “classical” measuring machines mainly by a higher robustness regarding temperature variation and environmental conditions like dirt and vibrations. All solutions from WENZEL are available with different tactile and optical sensors and are optimally operated by our own software. Our high quality demands on the machines should also be demonstrated by our users: simple operation despite a deep functional diversity - WENZEL is your long-term partner for today and tomorrow. Enjoy reading and challenge our fl exibility: we are ready to be there for you!
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WM | Blade Analyzer<br />
WM | BLADE ANALYZER<br />
EVALUATION OF TURBINE BLADE MEASUREM<strong>EN</strong>TS<br />
With the program WM | Blade Analyzer <strong>W<strong>EN</strong>ZEL</strong> introduces a new<br />
tool for the evaluation of turbine blade measurements. The software<br />
supports besides standard parameters like:<br />
• Maximum thickness<br />
• Leading and trailing edge radius<br />
• Edge thickness<br />
• Sheet length<br />
• Blade angle<br />
The software supports evaluations according to various manufacturer<br />
standards (GE, Safran, Rolls Royce, Pratt & Whitney).<br />
Various best fit algorithms for determining the blade position are<br />
also included in the scope of services, as is the evaluation of head<br />
and foot tolerances. A pre-defined workflow makes it easy for the<br />
user to create the measurement report. A generated report can<br />
be saved as a template and used for all further measurements.<br />
The measurement data is transferred in file format. Different<br />
formats such as vda, iges, csv and xml are supported. Besides<br />
manual use, the software can also be automated by command<br />
line parameters. For statistical recording of the results the data<br />
can be stored in different formats.<br />
ALL STANDARD<br />
EVALUATIONS<br />
All standard evaluations of blade sections are already integrated<br />
and can be individually selected or deselected for<br />
reporting.<br />
P Angles (chord, tangent)<br />
P Positions (leading edge<br />
point, trailing edge point, ...)<br />
P Lengths (chord, max., tan-<br />
gent,...)<br />
P Dimensions (max. exten-<br />
sion X, max. extension Y)<br />
P Thickness (leading edge,<br />
max., trailing edge)<br />
P Deviations (max. devation,<br />
min. deviation)<br />
P Radii (leading edge, trai-<br />
ling edge)<br />
BESTFIT<br />
OPERATOR<br />
The Bestfit Operator can be applied to entire cuts as well<br />
as to individual cut segments. The supported algorithms<br />
include:<br />
P Camberline Fit<br />
P Spline Fit<br />
P Gauss<br />
P Chebycheff<br />
P Constrained Chebycheff<br />
P L1<br />
154 18
Change language