WENZEL GENERAL CATALOG EN
Measurement technology has been our profession since 1968 and we have developed it to absolute perfection over the years. WENZEL stands for highest quality standards and reliability - without forgetting that only those who have their sights set on the future and their vision constantly in mind can survive. WENZEL offers numerous innovative solutions for measurement solutions for production, which we present here in this segment brochure. The shopfloor measuring technology has two main tasks: on the one hand it serves to monitor the process stability in the production and on the other hand the dimensional accuracy of the components. For testing the stability, fast but not quite as accurate solutions are often suffi cient: we at WENZEL offer you measuring arms with tactile and optical sensors and comparators such as the Equator from Renishaw. However, ensuring dimensional accuracy still requires highly accurate measuring equipment. We at WENZEL offer you our own range of SF solutions for this purpose. With the SF 55, 87 and 1210 we cover a wide range with which we can meet a great many requirements. These machines differ from our “classical” measuring machines mainly by a higher robustness regarding temperature variation and environmental conditions like dirt and vibrations. All solutions from WENZEL are available with different tactile and optical sensors and are optimally operated by our own software. Our high quality demands on the machines should also be demonstrated by our users: simple operation despite a deep functional diversity - WENZEL is your long-term partner for today and tomorrow. Enjoy reading and challenge our fl exibility: we are ready to be there for you!
Measurement technology has been our profession since 1968 and we have developed it to absolute perfection over the years. WENZEL stands for highest quality standards and reliability - without forgetting that only those who have their sights set on the future and their vision constantly in mind can survive. WENZEL offers numerous innovative solutions for measurement solutions for production, which we present here in this segment brochure. The shopfloor measuring technology has two main tasks: on the one hand it serves to monitor the process stability in the production and on the other hand the dimensional accuracy of the components. For testing the stability, fast but not quite as accurate solutions are often suffi cient: we at WENZEL offer you measuring arms with tactile and optical sensors and comparators such as the Equator from Renishaw. However, ensuring dimensional accuracy still requires highly accurate measuring equipment. We at WENZEL offer you our own range of SF solutions for this purpose. With the SF 55, 87 and 1210 we cover a wide range with which we can meet a great many requirements. These machines differ from our “classical” measuring machines mainly by a higher robustness regarding temperature variation and environmental conditions like dirt and vibrations. All solutions from WENZEL are available with different tactile and optical sensors and are optimally operated by our own software. Our high quality demands on the machines should also be demonstrated by our users: simple operation despite a deep functional diversity - WENZEL is your long-term partner for today and tomorrow. Enjoy reading and challenge our fl exibility: we are ready to be there for you!
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PRODUCT RANGE SOFTWARE<br />
WM | PointMaster exaCT® M<br />
REVERSE<br />
<strong>EN</strong>GINEERING<br />
A surface boundary on the polymesh is sketched<br />
interactively. The Geometry Navigator then calculates<br />
the optimal boundary curves for this area and<br />
approximates the surfaces. At the press of a button,<br />
the entire surface structure is given continuous<br />
curvature surfaces (C2-continuity). A plus point of<br />
WM I PointMaster is the visual support by the<br />
interactive feature “Shading”. Artifacts and discontinuities<br />
as well as the form guidelines important for<br />
the surface structure are displayed. New functions<br />
such as surface trimming using B-Spline curves, the<br />
transfer of surfaces created in CAD for reverse engineering<br />
and rule geometry recognition round off the<br />
range of functions.<br />
NOMINAL/ACTUAL<br />
VALUE COMPARISON<br />
The user transforms the measured data (scan data =<br />
actual data) into the coordinate system of the reference<br />
object (CAD data = target data), starts the analysis and<br />
receives a deviation color map as result. The measured<br />
deviations are displayed in a so-called deviation color map.<br />
Measuring points can be taken directly from the analysis<br />
object and transferred to a measuring protocol. Measuring<br />
programs created for a tactile measuring machine in<br />
WM I Quartis can be sent via I++ to WM | PointMaster.<br />
WM | PointMaster then functions as a virtual measuring<br />
machine, calculates the contact point from probe to component<br />
and then sends it back to WM I Quartis.<br />
FEATURES<br />
P Shrinkage and distortion correction<br />
For tool and die makers | Sophisticated functions and<br />
algorithms | Compensation of the formed or original<br />
components<br />
P Comprehensive format support<br />
Handling scan and CT data | Support of all common scan,<br />
CAD, CT and CNC formats<br />
P Extensive functions<br />
Creation of documents including presentation tools for<br />
measurement reports, documentation | Reports for order<br />
preparation | Freely available viewer<br />
P Support of numerous data types<br />
Point clouds, polylines, polymasks | Surfaces and curves of<br />
higher order | Pixels and voxels |<br />
CNC traversing polyhedron<br />
151
Change language