solidworks
AssembliesAngle from seedSpecifies the angle from the seed to the selected instance. Use onlypositive values.Available for circular component patterns.Offset fromnominalSpecifies the relative value to the nominal position of the selectedinstance.The nominal position of the instance is the location of the instancebefore the modification.You can specify positive and negative values. For negative values,the absolute distance to the seed must be positive.Available for linear and circular component patterns.In the Linear Component Pattern and Circular Component PropertyManagers, Instancesto Skip is renamed to Instances to Override. You can specify instances to skip inSkipped instances . Use Modified instances to specify instances to modify.Modifying an Instance in a Linear Component PatternTo modify an instance in a linear component pattern:1. Open system_dir:\Users\Public\Public Documents\SOLIDWORKS\SOLIDWORKS2020\samples\whatsnew\assemblies\patterns\Vary_Pattern.SLDASM.2. In the FeatureManager design tree, right-click LocalLPattern1 and click EditFeature .3. In the PropertyManager, under Instances to Override, click in Modified instances. In the graphics area, pink selection orbs display on the pattern instances.4. Click the selection orb for 4,1 and click Modify Instance.58
Assemblies5. In the callout, modify the value for Dir 1 offset from nominal to -60mm and clickoutside of the callout.A shadow instance appears in the new position.6. In the PropertyManager, click .The bracket is no longer behind the pipe.Mirror Components PropertyManagerYou can position a mirrored component by using the origin of that component. You canselect multiple components in the component orientation field. You have more controlover the orientation of copied components that are not opposite-hand versions.New and changed options on the Step 2: Set Orientation page of the Mirror ComponentsPropertyManager:Mirror TypeComponentoriginMirrors a component instance about thecomponent origin of the selectedreference plane. This instance is not anopposite-hand version.59
- Page 7 and 8: Contents18 SOLIDWORKS PCB..........
- Page 9 and 10: Contents25 SOLIDWORKS Visualize....
- Page 11 and 12: Legal NoticesOther brand or product
- Page 13 and 14: 1Welcome to SOLIDWORKS 2020This cha
- Page 15 and 16: Welcome to SOLIDWORKS 2020• Silho
- Page 17 and 18: Welcome to SOLIDWORKS 2020In the Fe
- Page 19 and 20: 2User InterfaceThis chapter include
- Page 21 and 22: User InterfaceEnhanced Large Toolti
- Page 23 and 24: User InterfaceExport MarkupExports
- Page 25 and 26: User Interface2. In the Material di
- Page 27 and 28: User InterfaceView Recent FilesYou
- Page 29 and 30: SOLIDWORKS FundamentalsChanges to S
- Page 31 and 32: SOLIDWORKS FundamentalsChecking the
- Page 33 and 34: SOLIDWORKS Fundamentalsof SOLIDWORK
- Page 35 and 36: SOLIDWORKS Fundamentals2. Right-cli
- Page 37 and 38: SOLIDWORKS Fundamentals7. In the Sa
- Page 39 and 40: InstallationInstalling Toolbox Soft
- Page 41 and 42: 5AdministrationThis chapter include
- Page 43 and 44: AdministrationSpecifying Support In
- Page 45 and 46: AssembliesCreating Envelopes for a
- Page 47 and 48: AssembliesAdd a Group / Edit GroupA
- Page 49 and 50: AssembliesReusing a Multibody Part
- Page 51 and 52: AssembliesTo change a component fro
- Page 53 and 54: Assemblies10. In the graphics area,
- Page 55 and 56: AssembliesLinear andCircularPattern
- Page 57: AssembliesLimit Angle MateAvailable
- Page 61 and 62: AssembliesChanges to the Step 2: Se
- Page 63 and 64: Assemblies6. Under Orient Component
- Page 65 and 66: Assemblies6. Under Mirror Type, sel
- Page 67 and 68: Assemblies4. Click OK .The pattern
- Page 69 and 70: SOLIDWORKS CAMTab CuttingYou can cr
- Page 71 and 72: SOLIDWORKS ComposerImporting Appear
- Page 73 and 74: SOLIDWORKS ComposerSee Composer Hel
- Page 75 and 76: Detailing and DrawingsTo add hole c
- Page 77 and 78: Detailing and DrawingsEditing Alter
- Page 79 and 80: Detailing and Drawings3. Click feat
- Page 81 and 82: Detailing and Drawings2. Select the
- Page 83 and 84: Detailing and DrawingsCreating Mark
- Page 85 and 86: Detailing and DrawingsSetting Custo
- Page 87 and 88: Detailing and DrawingsIn addition,
- Page 89 and 90: Detailing and DrawingsDrafting Stan
- Page 91 and 92: eDrawings• 2D annotations, genera
- Page 93 and 94: eDrawingsButtonFunctionalityResets
- Page 95 and 96: eDrawings2020Model DisplayYou can d
- Page 97 and 98: SOLIDWORKS ElectricalText LeaderYou
- Page 99 and 100: SOLIDWORKS ElectricalHorizontal lan
- Page 101 and 102: SOLIDWORKS ElectricalViewProjects m
- Page 103 and 104: SOLIDWORKS ElectricalRow StyleAutom
- Page 105 and 106: 12SOLIDWORKS Flow SimulationThis ch
- Page 107 and 108: 13SOLIDWORKS 3D InterconnectThis ch
Assemblies
Angle from seed
Specifies the angle from the seed to the selected instance. Use only
positive values.
Available for circular component patterns.
Offset from
nominal
Specifies the relative value to the nominal position of the selected
instance.
The nominal position of the instance is the location of the instance
before the modification.
You can specify positive and negative values. For negative values,
the absolute distance to the seed must be positive.
Available for linear and circular component patterns.
In the Linear Component Pattern and Circular Component PropertyManagers, Instances
to Skip is renamed to Instances to Override. You can specify instances to skip in
Skipped instances . Use Modified instances to specify instances to modify.
Modifying an Instance in a Linear Component Pattern
To modify an instance in a linear component pattern:
1. Open system_dir:\Users\Public\Public Documents\SOLIDWORKS\SOLIDWORKS
2020\samples\whatsnew\assemblies\patterns\Vary_Pattern.SLDASM.
2. In the FeatureManager design tree, right-click LocalLPattern1 and click Edit
Feature .
3. In the PropertyManager, under Instances to Override, click in Modified instances
. In the graphics area, pink selection orbs display on the pattern instances.
4. Click the selection orb for 4,1 and click Modify Instance.
58
Change language