solidworks

Assemblies
Isolating Interferences
In the Interference Detection tool for assemblies and multibody parts, you can tag
interference, components, or bodies for isolation after you exit the Interference Detection
PropertyManager.
To isolate interferences:
1. Open an assembly or multibody part, and click Interference Detection (Evaluate
toolbar).
2. In the PropertyManager, click Calculate.
3. Under Results, right-click an interference and click Isolate when done.
Isolated interferences appear as .
When you select Component View for assemblies or Body View for multibody parts,
you can click Isolate when done for the parent component, the child component,
or the interference.
4. Click .
The tagged interferences appear in the graphics area.
5. Click Exit Isolate on the Isolate pop-up toolbar.
Large Design Review
Create and Edit Component Patterns in Large Design Review
You can create and edit linear and circular component patterns when you edit an assembly
in Large Design Review mode. You can edit pattern driven and sketch driven component
patterns. This functionality is available for top-level assemblies only.
For a component pattern that is driven by an unavailable entity,
**LargeDesignReview** shows as a prefix to the entity name in the PropertyManager.
Available Functionality by Component Pattern
Linear and
Circular
Pattern Driven
and Sketch
Driven
Curve Driven
and Chain
Create
Delete
54