solidworks

SOLIDWORKS Fundamentals
Large Assembly Settings
After opening an assembly, click Large Assembly Settings in the Assembly tab of
the CommandManager to enable or disable these settings.
For Assemblies system options, the following large assembly options are renamed:
New Name
Previous Name
Use Lightweight mode and Large
Assembly Settings when the number of
components exceeds
Use Large Assembly Mode to improve
performance when the assembly
contains more than this number of
components
Use Large Design Review mode when
the number of components exceeds
Use Large Design Review when the
assembly contains more than this
number of components
To access these options, click Tools > Options > System Options > Assemblies.
Selection Sets
You can add and remove selected items to new or existing selection sets. You can add
selected items to multiple selection sets.
In assemblies, only the selection sets for the assembly show when you click Save
Selection. In parts, only the selection sets for the part show. To view selection sets, in
the FeatureManager ® design tree, expand Selection Sets .
You can drag a selected item from the FeatureManager design tree or from a selection
set to another selection set. You cannot drag items from an assembly selection set to a
part selection set.
Adding a Selection to a Selection Set
To add a selection to a selection set:
1. Open a model and select multiple items in the FeatureManager design tree or graphics
area.
34