solidworks

Structure System and Weldments
10. Right-click in Member Parameters and click Clear Selections.
11. In the graphics area, click Left Orientation (Heads-up View toolbar) and repeat
steps 6 to 9 to generate another row of secondary members.
12. Unpin the PropertyManager and click .
13. Click Structure System in the Confirmation Corner to exit Structure System
mode.
14. In the Corner Management PropertyManager, click .
Member and Corner Trim Enhancements
Enhancements and quality improvements for structure system features include:
• When creating Ref Plane and Face Plane intersection primary members, you can
select faces in addition to reference planes.
• When creating Support Plane secondary members, you can select faces in addition
to reference planes.
• You can delete input sketches and planes for individual members without deleting the
Structure System feature.
• Issues with corner treatment, especially with creating complex corners, are resolved.
• You can define individual gap values for trimming corners.
• Original corner features are retained even after adding or deleting new members at
the corner location.
Cut List Properties for Weldment and Structure
System Features
Two cut list properties are available for structural members created by weldment as well
as structure system features.
The Angle Direction property indicates whether the two ends face of the body are along
the same direction or not. You can specify:
• Same
211