solidworks

Structure System and Weldments
Adding a Structure System Feature to an Existing Feature
1. Click Insert > Structure System > Structure System .
2. Click Insert > Structure System > Secondary Member .
3. Click Pin at the top of the PropertyManager.
4. Click the Profile tab and set the following:
a) For Standard, select Iso.
b) For Type, select square tube.
c) For Size, select 80 x 80 x 5.
5. Click the Member tab, and for Secondary Member Type, click Support Plane
Member .
6. Click in Support Plane, and in the flyout FeatureManager design tree, select Plane2.
7. Click in Member Parameters and click Chain Link .
8. In the graphics area, click Right Orientation (Heads-up View toolbar).
9. Click each of the vertical members and click .
A row of secondary members displays along the right side of the model.
210