solidworks

Structure System and Weldments
6. In the graphics area, select the vertical member that intersects the horizontal
members, as shown.
7. Click .
Members 8, 20, and 16 split at their intersection of Member 15.
Do not exit Structure System mode. Keep the model open to continue with the next
step.
Splitting Members by Dimension
To split members by dimension:
1. In the graphics area, select the longest horizontal member as shown.
The PropertyManager lists Member21 in Selected Members.
2. In the PropertyManager, click Split Member and select Based On Dimension.
3. Click Instance and enter 6.
4. Click .
5. In the FeatureManager design tree, expand Structure System2 and expand
<iso><square tube><20 x 20 x 2>(3).
Member21 lists the split instances from Member21_1 to Member21_6.
207