solidworks

Sketching
You can use the Power Modify ink strokes to do the following:
• Add fillets by drawing an arc that intersects sketch geometry.
When you add multiple fillets quickly, the software converts all the pink strokes into
fillets at the same time. The software considers them as consecutive fillets with the
same radius and creates an automatic relation with the first fillet in the series.
• Add chamfers by drawing a line that intersects sketch geometry.
• Power trim sketch entities by drawing a scribble gesture on sketch geometry.
• Extend sketch entities along their natural paths by drawing a line or arc that partially
overlaps the sketch geometry to which you want to extend.
192