solidworks

SOLIDWORKS Simulation
Table 1: Listing of Free Body Forces on Selected Faces
Link Between Results and Model Files
The algorithm that links the results file (*.cwr) to the model file that generated the
results is improved.
You can upload and view result plots from data saved in the most recent *.cwr file, even
in cases where the software terminated before completing the analysis of all simulation
studies. For example, during a batch analysis of multiple studies, if the program terminates
before running the last study, the software validates the links to the completed *.cwr
files for post-processing.
It is important to save the model after meshing. The same mesh data exist in both files
for the software to establish the link between the results file and the model that generated
the results.
The software checks for the results file in this order:
1. The results folder specified on the study's Properties dialog box.
2. The folder of the model file that generated the results.
3. The results folder specified on the Default Options > Results tab.
To re-establish a link between a valid *.cwr file and a model file, and be able to create
result plots, start the Simulation Evaluator.
Simulation Evaluator lists the location of the model file and results folder. If a results
file (*.cwr) exists, click the link provided to validate the results file and link it to the
184