solidworks

Routing
Selected Entities
CPoint Name
Port ID or Pin Number
Displays the entities from the Selections section.
Displays the connection point name, which you can edit.
Displays the port ID or pin number, which you can edit.
To create the connection points for the Selected Entities, select the check box for each
row.
View/Edit Connection Point Parameters
You can use this dialog box to view and edit connection point parameters. The software
highlights the CPoint or ACPoint in the graphics area and FeatureManager design tree
when you select or edit any parameter.
To access this dialog box:
1. Open a part that has connection points or an assembly that has assembly connection
points.
2. In the FeatureManager design tree, right-click CPoint and click View/Edit
Connection Point Parameters.
CPoint Name
Pin Number/Port ID
Stub Length
Reverse Direction
Displays the connection point name.
Displays the pin number or port number, which you can edit.
Displays the stub length, which you define when you create
connection points. You can edit the stub length.
Reverses the direction of the route.
For assembly connection points, you can edit only the Pin Number/Port ID.
Length Leaders for Flattened Routes
You can show length leaders when you flatten routes with the Flatten Route
PropertyManager.
To access the PropertyManager in the route assembly, click Tools > Routing > Electrical
> Flatten Route .
Flatten Options
Show Length Leaders
Displays length leaders in the flattened route and on flattened
drawings.
173