solidworks

Parts and Features
To specify the thicken direction:
1. Open system_dir:\Users\Public\Public Documents\SOLIDWORKS\SOLIDWORKS
2020\samples\whatsnew\parts\thicken_surface.SLDPRT.
2. Click Thicken (Features toolbar), or Insert > Boss/Base > Thicken.
3. In the PropertyManager:
a) For Surface to Thicken, select Surface-Trim 2 in the flyout FeatureManager
tree.
b) For Thickness, type 50mm.
c) Click in Direction of Thicken.
140