solidworks

Parts and Features
After creating the hole feature, you can switch between the two options. Hole callouts in
drawings display dimensions based on the depth of the end condition.
Previously, the end condition of a hole was calculated only up to the full diameter of the
shoulder.
Hole Wizard
Continuing improvements are available in the Hole Wizard.
For example:
• Thread depths are recalculated. Threads cannot be deeper than the hole, regardless
of whether Automatically calculate blind hole depth is selected or cleared.
• Show custom sizing does not switch between selected and cleared in unexpected
ways.
• Changes to Head Clearance are correctly reflected in the PropertyManager and
Toolbox.
Additional improvements have been made in areas such as updating the tolerance of the
fit between holes and shafts, and handling the Near side countersink option.
Repairing Missing References for Fillets and
Chamfers
You can repair fillet and chamfer features that are missing edges.
When you edit fillet or chamfer features that have errors, all missing references display
at the top of the Items to Fillet or Items to Chamfer box in the PropertyManager. You
can right-click missing references to zoom to their location, repair individual or all missing
references, or clear the list of missing references.
To repair, the software attempts to reattach missing references when the missing reference
location in the model contains a valid physical edge, face, or loop. If it only repairs a
subset of the missing references, the number of repaired edges display.
135