solidworks
SOLIDWORKS ElectricalViewer ZoneDisplays the selected drawing. The software displays one drawing at a time. The drawingsare read-only and you can only use zoom commands.Reimport Electrical Data for Wires, Cables, andHarnessesYou can remove unused sketch segments from wires, cables, and harnesses.If you remove a wire or core from electrical routes, cables or harnesses in SOLIDWORKSElectrical Schematics, when you reimport that model, the software removes the wire orcore from the model in SOLIDWORKS Electrical 3D.If you delete a wire style from a route assembly in SOLIDWORKS Electrical Schematics,when you reimport that model, the software deletes that particular route assembly fromSOLIDWORKS Electrical 3D.Routing ParametersYou can set the routing parameters to create electrical harnesses from the Route harnessesPropertyManager.Enhanced largeassemblyperformanceManual harnessGenerate fan-outsSuppresses all the 3D parts of large assemblies to enhanceperformance.Adds the components to the harness and creates guidelines.Select this to manually finish the harness.Creates fan-outs for multipin connectors. This option is enabledwhen you select Manual harness.Report Enhancements for Rows and ColumnsYou can add a column that specifies the row number and controls the row height in reports.Row Height in ReportsYou can set the row height. The software ensures that the row height is not less than thefont size.To control the row height, on the Project tab, click Reports > Properties >Report configuration edition > Styles and set the Row height.This functionality applies to Header, Content, and Total.102
SOLIDWORKS ElectricalRow StyleAutomaticMinimum heightFixed heightApplies the default value for the row height.Applies the minimum height entered in Row height. Applicablefor multiple lines in a row.Applies the fixed height entered in Row height. Applicable fora single line in a row.Row HeightEnter the row height.Row Number Column in ReportsYou can add a column in a report that specifies the row number of the report entity.You can configure the row number and define a base number in the report template. Therow numbers are consecutive and auto assigned in the report manager and reportdrawings.The row numbers are still consecutive when you apply the following operations:• Filter• Sort• Merge• BreakUse the following variables to keep row numbers consecutive after a break:• REPORT_ROW_GLOBAL. Applies consecutive row numbers to the entire row.• REPORT_ROW. Applies consecutive row numbers to each report table that has breaks.User Rights ManagerYou can archive custom user profiles, customize the feature grid, control the deletionrights of user profiles, and create a user-defined profile from the User rights manager.Archive EnvironmentYou can archive and unarchive the environment, user-defined profiles, and linked features.A notification appears when there is a mismatch between the number of profiles duringarchiving and unarchiving.103
- Page 51 and 52: AssembliesTo change a component fro
- Page 53 and 54: Assemblies10. In the graphics area,
- Page 55 and 56: AssembliesLinear andCircularPattern
- Page 57 and 58: AssembliesLimit Angle MateAvailable
- Page 59 and 60: Assemblies5. In the callout, modify
- Page 61 and 62: AssembliesChanges to the Step 2: Se
- Page 63 and 64: Assemblies6. Under Orient Component
- Page 65 and 66: Assemblies6. Under Mirror Type, sel
- Page 67 and 68: Assemblies4. Click OK .The pattern
- Page 69 and 70: SOLIDWORKS CAMTab CuttingYou can cr
- Page 71 and 72: SOLIDWORKS ComposerImporting Appear
- Page 73 and 74: SOLIDWORKS ComposerSee Composer Hel
- Page 75 and 76: Detailing and DrawingsTo add hole c
- Page 77 and 78: Detailing and DrawingsEditing Alter
- Page 79 and 80: Detailing and Drawings3. Click feat
- Page 81 and 82: Detailing and Drawings2. Select the
- Page 83 and 84: Detailing and DrawingsCreating Mark
- Page 85 and 86: Detailing and DrawingsSetting Custo
- Page 87 and 88: Detailing and DrawingsIn addition,
- Page 89 and 90: Detailing and DrawingsDrafting Stan
- Page 91 and 92: eDrawings• 2D annotations, genera
- Page 93 and 94: eDrawingsButtonFunctionalityResets
- Page 95 and 96: eDrawings2020Model DisplayYou can d
- Page 97 and 98: SOLIDWORKS ElectricalText LeaderYou
- Page 99 and 100: SOLIDWORKS ElectricalHorizontal lan
- Page 101: SOLIDWORKS ElectricalViewProjects m
- Page 105 and 106: 12SOLIDWORKS Flow SimulationThis ch
- Page 107 and 108: 13SOLIDWORKS 3D InterconnectThis ch
- Page 109 and 110: 14SOLIDWORKS ManageThis chapter inc
- Page 111 and 112: SOLIDWORKS ManageCopy Manual Quanti
- Page 113 and 114: SOLIDWORKS ManageExport Feature of
- Page 115 and 116: SOLIDWORKS Manage2. Click at the up
- Page 117 and 118: SOLIDWORKS ManageThe functionality
- Page 119 and 120: SOLIDWORKS MBDSorting by Annotation
- Page 121 and 122: 16Model DisplayThis chapter include
- Page 123 and 124: Model DisplayBody Compare PropertyM
- Page 125 and 126: 17Parts and FeaturesThis chapter in
- Page 127 and 128: Parts and FeaturesDecimating a Grap
- Page 129 and 130: Parts and Features6. In the Propert
- Page 131 and 132: Parts and Features5. Drag the point
- Page 133 and 134: Parts and Features4. In the Tangent
- Page 135 and 136: Parts and FeaturesAfter creating th
- Page 137 and 138: Parts and Features9. Under Items to
- Page 139 and 140: Parts and Features7. Click .The too
- Page 141 and 142: Parts and Features4. In the graphic
- Page 143 and 144: 18SOLIDWORKS PCBThis chapter includ
- Page 145 and 146: 19SOLIDWORKS PDMThis chapter includ
- Page 147 and 148: SOLIDWORKS PDM• Background loadin
- Page 149 and 150: SOLIDWORKS PDMCustomizable Variable
- Page 151 and 152: SOLIDWORKS PDM4. From Search for, S
SOLIDWORKS Electrical
Viewer Zone
Displays the selected drawing. The software displays one drawing at a time. The drawings
are read-only and you can only use zoom commands.
Reimport Electrical Data for Wires, Cables, and
Harnesses
You can remove unused sketch segments from wires, cables, and harnesses.
If you remove a wire or core from electrical routes, cables or harnesses in SOLIDWORKS
Electrical Schematics, when you reimport that model, the software removes the wire or
core from the model in SOLIDWORKS Electrical 3D.
If you delete a wire style from a route assembly in SOLIDWORKS Electrical Schematics,
when you reimport that model, the software deletes that particular route assembly from
SOLIDWORKS Electrical 3D.
Routing Parameters
You can set the routing parameters to create electrical harnesses from the Route harnesses
PropertyManager.
Enhanced large
assembly
performance
Manual harness
Generate fan-outs
Suppresses all the 3D parts of large assemblies to enhance
performance.
Adds the components to the harness and creates guidelines.
Select this to manually finish the harness.
Creates fan-outs for multipin connectors. This option is enabled
when you select Manual harness.
Report Enhancements for Rows and Columns
You can add a column that specifies the row number and controls the row height in reports.
Row Height in Reports
You can set the row height. The software ensures that the row height is not less than the
font size.
To control the row height, on the Project tab, click Reports > Properties >
Report configuration edition > Styles and set the Row height.
This functionality applies to Header, Content, and Total.
102