Farms and Farm Machiner #400

Precision Agriculture
6 PAGE SPECIAL FEATURE
Issue 400 > $7.95 > On sale 15/07/21
Tractors, farm machinery & materials handling equipment for sale
INSIDE
Trans Fixed
John Deere 6120M
Compact
Powerhouse
Kubota M5-111
Full Bloom
Inside Australia’s
Lavender Industry
BUMPER
132
PAGE ISSUE
A CUT
Above
With a high-spec engine, redesigned Maxivision cabin and Trimble precision tech as standard,
the seven models in Deutz-Fahr’s Warrior tractor range are fighting fit and ready to go >> Page 14
,!3BD0A6-aaejdg!:k;s
$92,400 $37,900 $104,000
$90,000
2018 Amazone ED 6000. Precision Planter.
12 rows w/50cm spacing • 03 8547 8799
2020 Case IH Farmall 50B. 2.5L 4cyl diesel
engine 50hp • 08 7007 6557
Strautmann 1801 twin auger mixer.
Electrohydraulic controls • 07 3073 8229
2001 John Deere 9750 STS. 4WD grain
machine, straw spreaders • 03 8547 8800
INSIDE: 70+ pages of new & used farm machinery for sale + more at TradeFarmMachinery.com.au

PREPARATION
Ground preparation is often low-speed work with
a desire to maximise hectares per hour to ensure
it’s completed within mother-natures weather
cycles. Ergonomics and accuracy are critical; long
days in the cab can be made less daunting with the
ergonomics of the DEUTZ-FAHR CABIN and fully
integrated TRIMBLE GFX-750 CONSOLE
at your fingertips.
You can use a satellite correction source like
Trimble’s RangePoint RTX ® or the premium 2.5cm
accuracy CenterPoint RTX ® to minimise any
implement overlap improving your output per hour.
PLANTING
When your busy planting keeping your eyes
on what’s happening is critical. You can
depend on Trimble’s NAV-900 GUIDANCE
CONTROLLER featuring Trimble’s most
powerful GNSS hardware, it tracks more
satellites from more constellations leading
to the most robust performance.
Upgrade to NTRIP and modem for millimetre
level accuracies and remote support
on the console.
TRIMBLE POWERED TO SUIT ALL YOUR NEEDS

SPRAYING
High speed with high accuracy is needed,
ensuring your DEUTZ-FAHR tractor is online
is the fully integrated hydraulic steering
solution. The NAV-900 GUIDANCE controller is
monitoring data inputs from the most advanced
IMU modules, sensors, GNSS positioning
and tractor data making fine adjustments
automatically thousands of times per second.
With ISOBUS as standard, directly connect
your ISOBUS sprayer to the console
and operate steering and your
implement in one place.
HARVESTING
Harvest time isn’t the time to learn how to
use a new console, Deutz-Fahr Australia
strategically aligned with Trimble to offer
GENUINE TRIMBLE HARDWARE to
simplify farmers busy lives.
The user interface is easy to learn with a
simple get in and go mode, and for existing
users allows a direct import of existing data.
Why not add a camera to the console and
keep an eye on everything at once?
CALL YOUR WARRIOR EXPERT TODAY
PHONE 1800 789 633 WEB WWW.DEUTZFAHR.COM.AU

CONTENTS
New business
advertising
Email newsales@aremedia.com.au
or call the state representative below
Private advertising
ADVERTISE tradefarmmachinery.com.au/sell
EMAIL privateads@aremedia.com.au
PHONE 1300 362 272
Advertiser services
1300 362 355
Editorial
EDITOR Andrew Hobbs
andrew.hobbs@aremedia.com.au
JOURNALISTS
Lincoln Bertelli, Anthony Wingard
CONTRIBUTORS
Justin Bennett, Jaiden Drought, Daniel
Gardner, Harrison Hunkin, Willie McKnight,
Trevor Whittington
ART DIRECTOR Daz Woolley
PRODUCTION CO-ORDINATOR
Cat Fitzpatrick
EDITORIAL AND NEWS:
73 Atherton Rd, Oakleigh, VIC, 3166
Tel: 0429 530171
Email: andrew.hobbs@aremedia.com.au
Digital
PRODUCER Michael Cahill
Marketing &
distribution
CIRCULATION MANAGER Stuart Jones
Advertising
INDUSTRY SALES MANAGER
Adrian Christian 0423 761 784
adrian.christian@aremedia.com.au
GROUP SALES MANAGER
Carl Rakusin 0409 838 984
carl.rakusin@aremedia.com.au
QLD Emily Schultz 0466 317 555
emily.schultz@aremedia.com.au
SA/WA Nick Lenthall 0439 485 835
nick.lenthall@aremedia.com.au
VIC/TAS Matt Carey 0438 359 109
matt.carey@aremedia.com.au
NSW Ben Coleman 0466 545 664
ben.coleman@aremedia.com.au
Finance
SENIOR ACCOUNTANT Andrew Hughes
Executive Group
GM – INDUSTRY Graham Gardiner
AUTOMOTIVE CEO Andrew Beecher
COMMERCIAL CONTENT
DIRECTOR Matt Rice
OPERATIONS MANAGER Regina Fellner
DIGITAL DIRECTOR Tim Kenington
FINANCE MANAGER Cain Murphy
PEOPLE & CULTURE
MANAGER Nicola Ramsay
Subscriptions
Tel: 136 116 Fax: 02 9267 4363
Web: magshop.com.au
Farms & Farm Machinery Subscription
Reply Paid 4967, Sydney, NSW, 2001
For advertising terms
& conditions:
www.industry.aremedia.com.au
ISSN 1449-6399
Farms & Farm Machinery is published by Are Media Pty
Limited. ABN 18 053 273 546, 54-58 Park Street, Sydney,
NSW, 2000. All material in Farms & Farm Machinery is
protected by the Commonwealth Copyright Act, 1968. No
material may be reproduced in part or in whole without
written consent from the copyright holder. Distributed
by Ovato Distribution. Printed by IVE Print. Cover price is
recommended maximum retail price.
14
News
06 Case IH adds Farmall M to utility tractor range
07 XAG’s first unmanned ground vehicle
08 TYM unveils two new T613 models
10 Krone upgrades Comprima CV 150 XC baler
12 New Holland expands Boomer compact models
14 Cover Story: Deutz-Fahr’s new Warrior tractors
16 Valtra N and T Series tractors now available
18 ABARES predicts record-breaking production
20 Rabobank suggests increase in planted land
22 Farmer confidence riding high
24 Australia and UK sign Free Trade Agreement
30 Bromadiolone rejected for broadacre application
34 Recommendations released on aftersales repairs
Event News
28 Queensland’s Finest
Highlights from June’s FarmFest
400th Issue
36 400 Not Out
Farms & Farm Machinery’s 400th edition
Feature
36 Full Bloom
Australia’s booming lavender industry
Precision Ag
50 Hands Free
CSU to build Australia’s first hands-free farm
52 Taking Flight
CNH Industrial buys Raven Industries
54 Perfect Accompaniment
Yamaha partnership to boost ag robotics
Reviews
56 Trans Fixed
John Deere 6M with IVT transmission system
60 Compact Workhorse
Kubota M5-111 ROPS tractor
64 Looking Good
Nissan Navara ute
Regulars
26 Events calendar
32 Market analysis
38 WAFarmers column
89 Hot Deals: Hand-picked items for sale
107 Plant & Equipment
Cranes, compressors and more
128 Private advertising
List your item for sale + rates,
deadlines and coupon
60
130 Index
8
28
4 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

NO MATTER WHICH BOBCAT COMPACT
TRACTOR YOU CHOOSE, IT’S WELL EQUIPPED
TO KEEP UP WITH YOUR TO-DO LIST.
CT1025
CT2035
CT20400
CT4045
CT40555
| 25hp
| 35hp
| 38hp
| 45hp
| 55hp
BOBCAT TELEHANDLERS ARE
IN STOCK
AND READY FOR
QUICK
DELIVERY
AT JUST
1.99%
FINANCE *
*1.99% finance is available on all new Bobcat Telescopic Handlers sold by Clark Equipment. Finance is via
MKP Finance Pty Ltd ABN 56 611 706 784 and is based on a 36 month chattel mortgage with 10% deposit
required, followed by 36 equal monthly repayments and no balloon. Finance is subject to credit approval and
is only available to approved ABN holders. Terms and conditions apply. For further details, contact Clark
Equipment. Offer ends 31/08/2021, while stock lasts.
www.bobcatofaustralia.com.au
clark@clarkequipment.com
1300 736 848
Bobcat Australia
bobcatofaustralia
Bobcat Australia

PRODUCT NEWS
empowered debut
Case IH has added to its
utility tractor range with the
Farmall M
Above: The new Farmall M range
is designed to suit a variety of farm
businesses
Case IH’s new Farmall M made its Australian debut at the
FarmFest Field Days at Toowoomba last month, with the
manufacturer saying the new models are upping the ante
among utility tractors.
The Farmall M is a new addition to the broader Farmall Series,
which includes the Farmall B, C, JX, JXM and U Series, says
Seamus McCarthy, Case IH Australia and New Zealand product
manager for mid-horsepower and compact tractors.
“Case IH’s utility tractor range is strengthened by the
introduction of the Farmall M, combining many of the best
Farmall features, such as the Farmall U’s SPS transmission,
hydraulics and electronic draft control and Farmall JX’s superior
engine and front axle design,” he says.
With both 90 and 110 horsepower (67 and 82kW) models,
the Farmall M models come with Case IH’s new ActiveDrive 4
automatic transmission, replacing the clutch with buttons for
seamless gear shifting.
The ActiveDrive 4 semi-powershift transmission covers a wide
range of speeds, from 0.28km/h to 40km/h, with a total of 32
forward and 32 reverse gear options.
The Farmall M tractors have a powerful S8000 engine, standard
in all models, along with a Tier 3 emission level, four cylinders,
Turbo-Intercooler and high torque values.
The tractors have electro-hydraulic components and an
electro-hydraulic power take-off clutch with three different
speeds (540, 540E and 1,000rpm) and an automatic power takeoff
function, designed to complete easy row-end manoeuvres
when combined with its automatic 4WD and differential lock.
Both models also have a hydraulic lift capacity of 5,400kg, six
hydraulic outlets, fender-mounted hydraulic controls, a hydraulic
top link and a standard electronic hitch control system for easy
attachment control.
Inside, the cab is spacious with air-conditioning, ergonomic
control levers, an air-suspension seat and sunroof.
Case IH says the Farmall M will suit a variety of farm
businesses, including dairies and beef cattle operations, as they
possess the adaptability needed for a variety of tasks in a range
of conditions.
“The Farmall range represents our smaller horsepower tractors,
but these tractors have always been big on performance and
features,” says McCarthy.
“The Farmall M is a perfect refection of this and represents
customer expectations that our increasingly sophisticated
technology isn’t reserved only for our larger tractors, but that it’s
also incorporated at the lower end of our tractor line-up.”
Left: The new 550 has 25kW (34 horsepower)
and 39Nm of torque
Above: The larger 700 model has a 659cc engine
and 467kg towing capacity
safe and sound
Upgrades to Kymco’s
quadbikes meet
Australia’s new safety
standards and increase
their towing capacity
Quad bike manufacturer Kymco has updated its range –
adding a new midsize model and putting a host of new
features on its existing flagship model.
Kymco’s MXU 700i LE EPS is the model that has been updated,
while the MXU 550i EPS is the newest addition to the range.
Importantly, both machines will meet the stage one
requirements of Australia’s new safety standards, which come
into effect later this year.
Both quad bikes are single-cylinder and liquid-cooled.
The new 550 has a 25kW (34 horsepower), 501cc engine and
39Nm of torque and will sit between the 700 and MXU 400 in
Kymco’s range.
The 550 also offers continuously variable automatic
transmission, four-wheel independent suspension, on-demand
2WD and 4WD, linked hydraulic disc brakes, front protector bar,
under seat storage and a 427kg towing capacity.
These features all apply to the updated 700 model as well,
albeit the larger quad bike has a 659cc engine and 467kg
towing capacity.
The increased towing capacity is one of the upgrades on the
700, alongside additional ground clearance, greater fuel capacity,
anti-theft steering lock and relocated fuel cell for better weight
distribution.
Points of difference between the two models include 30cm
steel wheels on the 550 and 35cm alloy on the 700, 63cm tyres
on the 550 compared to 66cm on the 700 and the addition of a
winch on the 700 model.
Kymco quad bikes are distributed in Australia by Melbournebased
Mojo Motorcycles.
The 550 retails at $11,490 and the 700 is $13,990.
6 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

PRODUCT NEWS
down to earth
XAG’s first unmanned ground vehicle
(UGV) offers a whole new spraying system
and is ready for launch Down Under
company best known for drones is taking its unmanned
A technology from the sky to the farm.
XAG has created an unmanned ground vehicle, which is
about to hit the Australian market and is being described as a
“world first”.
The R150 has multiple modes to suit farm jobs such as mowing,
spreading, spraying, transport of materials and precision plant
protection.
XAG Australia sales manager Bryce Dimec said last month that
the company had several R150 UGVs waiting in its warehouse
and was only waiting on software before they could be released
to the market.
He also says there are a number of ways the R150 can be
customised.
“The R150 is a world first in terms of a ground-based
unmanned spraying system, with the option of adding thirdparty
attachments for slashing over tougher terrain or row
seeding with up to 150kg of seed on board,” he says.
“It could also be a utility vehicle to transport goods from A to B.
“It’s all operated on remote control, using RTK [real time
kinematics] GPS co-ordinates, which offer centimetre accuracy
as the machine moves around.
“This is a whole new product for us and there’s nothing else
available here like this at the moment.”
Features of the R150 include an integrated steel frame with roll
cage, adjustable ground clearance, water and dust resistance,
4WD, brushless motor and electronic parking brake system.
The R150 is 1.515m long, 1.09m wide and 96.5cm high.
Its running speed is 1.2m per second and it has a load capacity
of 150kg.
When combined with XAG’s JetSprayer system, the R150 can
conduct autonomous crop spraying of up to five hectares per
hour, the company says.
Above: The XAG R150 is operated via
remote control and can use RTK GPS
co-ordinates for increased accuracy
european quality & performance
GREAT VALUE
TMU 1850 MULCHER
$9,995
STAR 350 RAKE
$6,990
ZLC 1300 ROTARY HOE
$3,520 X1500
$7,590
60-100HP LOW BODY MULCHER
Prunings mulchers for orchards, contractors
and mowing. Openable rear door
FAST CLEAN RAKING
Tandem axle, closed cam track, pivoting
headstock, removable arms
ROTARY HOE
15-25hp, adjustable depth skids,
adjustable rear leveling door
BEST VALUE LINKAGE SPREADER
Dual stainless steel spreading discs &
vanes, certified spreading to 18 metres,
stainless steel shields
ZTS 1800 MULCHER
$11,300
SM FINISHING MOWER
$3,548
RP HAY RAKE
KYLO 3000
$22,990
70-120HP HIGH BODY MULCHER
Double skin for strength, openable rear
door, Y and centre blade, adjustable skids
SIDE & REAR DISCHARGE
3 overlapped cutting blades, 4 height
adjusting castor wheels, 4mm steel body
SIDE DELIVERY HAY RAKE
Simple to use low-cost raking, for
spreading, turning and raking
CONTRACTOR LINKAGE SPREADER
Spreading computer, integrated load cells,
dual stainless steel spreading discs &
vanes, certified spreading up to 36 metres
The Farmliner brand has been a firm Aussie favourite since 1980, when Farmliner
tractors were first introduced to Australia. Forty years later, Farmliner is synonymous
with great value farm equipment that will stand the test of time.
Offer ends 31st Aug 2021. While stock lasts. Pictures for illustration purposes only.
Pricing excludes dealer delivery charges. Ask us about Inlon Finance.
For more information and
your nearest dealer
1800 849 090
www.inlon.ag/722
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 7

PRODUCT NEWS
Above: TYM’s T613 tractors are now
available with hydrostatic transmission
time for change
Korean tractor builder adds
hydrostatic transmission
option to its T613 models
TYM has bulked up its T613 tractor range, adding two
hydrostatic transmission models to sit alongside the manual
options already available.
This means the South Korean manufacturer now has four T613
models available, with both hydrostatic and manual available in
either rollover protection system or cabin tractors.
A new feature of the hydrostatic transmission tractors is
an auto throttle control, which automatically increases the
engine’s rpm and allows the operator to have both hands on
the steering wheel.
“The auto throttle control is an operator’s dream, enabling
concentration on the task at hand while the engine rpm is
managed by pressing the HST [hydrostatic transmission] foot
pedal,” says sales and marketing manager of TYM’s Australian
distributor Inlon, Gary Surman.
“It also increases efficiency.”
The 60 horsepower (45kW) hydrostatic tractors also include
a four-cylinder diesel engine, new styling and improved
ergonomics that were introduced on the manual equivalents
last year.
Two-speed independent power take-off (PTO) comes as
standard with 540 and 540 Economy, which saves fuel on the
less demanding PTO work.
The high capacity hydraulic pump works at 42 litres/minute and
provides fast loader operation, while two double acting remotes
will help suit a wider range of tractor attachments.
The steering has its own 19L/minute pump.
A flat-deck floor provides a wide and comfortable platform
for the operator with the adjustable suspension seat ensuring a
soft ride.
Inlon’s TYM T613 tractor package includes a self-levelling loader
with 4-in-1 bucket, joystick control and a Euro hitch to easily use
and change a wide range of attachments.
Left: Krone has introduced the Swadro
TC 1370 rake into its range
raking it in
Demand is already
outstripping supply for
Krone’s new delivery
rake, ahead of the hay and
silage season
The Swadro TC 1370 rake covers more ground per hour
than Krone’s Swadro1400Plus model and there is also an
additional tine on the rear rotors, a higher centre frame and
both larger transport and rotor wheels.
This 13.7m four-rotor system has been described as a
“productive workhorse” by Krone Australia’s assistant product
manager Nathan Thomas, who also says “uncompromised
stability and convenience” were the company’s goals when
designing the rake.
“A key feature of the Swadro TC 1370 is a new hydro-pneumatic
flotation suspension system, which allows users to adjust the
rotor weight from the tractor cabin instead of using springs on
the machine,” he says.
“This results in better and lighter ground contouring and less
stress on the machine.
“Another key feature is the new integral vibration dampers with
soft-down drop rate control, which gently lowers the rotors into
its working position, improving the quality of feed.
“Rotors can be adjusted individually or together on the monitor
via the electric height adjustment, meaning there is no need
to dismount the tractor, giving the operator more control and
saving valuable time.”
The Swadro TC 1370 features five tines on the rear rotors,
instead of four, and both larger transport wheels and wider rotor
wheels to provide better contouring and less bounce.
Other popular features of the Swadro range such as the
DuraMax steep dry cam track have been carried over to the
TC 1370.
8 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 9
THE BEST LUBRICANTS
WEREN’T
TOUGH
ENOUGH!
SO WE DEVELOPED
OUR OWN.
When you work your equipment off road, in hot, rugged and harsh conditions, you need lubricants
that are made for the job, not the road. Don’t compromise the performance and productivity of your
John Deere equipment. Discover how John Deere lubricants are tougher than you think.
Specifically developed to
be used in harsh conditions
under increased stress.
FIND OUT MORE AT YOUR LOCAL JOHN
DEERE DEALER OR VISIT XXX.COM.AU
Saves money by reducing
wear and downtime, and
prolonging equipment life.
Designed to extend
service intervals and
ensure peak performance.
FFM-FP-5189090-CS-400
Find out more at your local John Deere Dealer or visit JohnDeere.com.au/MadeTough
TRACTA_J63637_LUBRICANTS_AU_FFM

INDUSTRY NEWS
wrap star
A new ultrasound sensor
and an electric pressure
adjustment system are just
some of the new features
on the upgraded Krone
Comprima CV 150 XC baler
wrapper
Above: Krone has added a Plus version
to its Comprima CV 150 XC baler
wrapper range
German manufacturer Krone has upgraded its Comprima CV
150 XC baler wrapper, adding a Plus model with cosmetic
changes, an ultrasound sensor and a reduced height.
The Comprima, along with the company’s Fortima baler model,
uses a slat elevator system and sits alongside the Krone’s
VariPack belt baler, which was released last year.
Krone assistant product manager Nathan Thomas says the
Comprima CV 150 XC Plus would be ideal for contractors and
medium to large dairy farms.
“The new baler wrapper has been designed with strong
components to successfully combat the most extreme farm
conditions,” he says.
“Design changes including new covers, light holders and minor
colour changes give the machine a more modern look and run
in line with our current range of Comprima balers.
“The rear wrapper design has been updated and the overall
height of the machine has been reduced.
“The Comprima Plus wrapper’s new ultrasound sensor replaces
the previous sensor arms to easily identify if the bale is on the
wrapping table and a wheel and rubber mat on the bale turner
ensures a better turning process. The wrapping table’s deep
cradle and big bobbins ensure the bale is consistently rolled
during the wrapping cycle in tough conditions.”
The baler wrapper’s onboard hydraulic system self-regulates
and prevents system contamination through its own hydraulic
tank, pump, filters and valves. Another new feature is an electric
pressure adjustment system, which allows the operator to adjust
the bale density while inside the tractor cabin.
Krone also says “uncompromised stability and convenience”
were top of mind when designing the new baler wrapper.
standing orders
Producers are already making
plans for the incoming John
Deere 2022 9 Series tractors,
and they aren’t even in the
country yet
Above: Brothers David, Sam and Chris
Haworth, left to right, say the new John
Deere 2022 9 Series 9R 520 is an impressive
machine
They won’t land in Australia until later this year, but buyers of
John Deere’s 9 Series of tractors are already making plans.
Cropping contractors Sam, Chris and David Haworth, based in
West Wyalong in New South Wales, have already put the new
9 Series to use, testing the machine when sowing wheat for a
client as part of a demo of the 9R 520 organised by the local
John Deere dealer.
Working across more than 25,000 hectares, the brothers were
impressed with the extra horsepower in the 9R 520 – delivered
by the John Deere PowerTech PSS 13.6L engine and the
machine’s connectivity with the John Deere 1890 Disc Seeder.
So much so, they ordered two of them.
“For this purchase, we were looking for bigger equipment
to cover more hectares, operator comfort and ease of use,”
says Sam.
“This will complete our fleet and complement the equipment
we have, to maximise our efficiency of operation.
“With the extra horsepower and increased frame weight I
noticed straight away any wheel slip was greatly reduced, which
was an instant improvement.
“This meant I could pull the bar at a more constant speed,
which markedly improves productivity overall.”
The increased horsepower in the 9 Series has been accounted
for by an increase to the weight and maximum available
ballast on selected models in the 9R and 9RX from 27,200kg to
30,300kg.
Other upgrades and tweaks have also been made, including
the strengthening of several undercarriage components,
including the axle and front-frame across the 9R and four-track
9RX models.
An additional 50 extra horsepower (37kW) into high hydraulic
demand applications can also be available in the 9R 590 tractor
with hydraulic Intelligent Power Management (IPM).
All 9 Series tractors are fitted from the factory with JDLink
connectvitiy as well as Generation 4 CommandCentre
display, AutoTrac guidance and free access to the John Deere
Operations Centre.
The brothers’ contracting company – AgTrac Services –
operates a full fleet of John Deere equipment, including four 9R
470 tractors among others, which are put through their paces
throughout central NSW in the production of canola, wheat,
barley, chickpeas and faba bean.
Sam says that, given the size of their operation and number of
machines, the John Deere Operations Centre has been integral
to their operations.
“The John Deere Operations Centre is very important to our
business,” says Sam.
“Overall, it helps us keep a gauge on productivity and efficiency,
and it makes it really easy to see straight away where everyone
is at in the paddock.
“With our bigger machinery we will be able to cover more
hectares with less equipment and the ease-of-use in our new 9
Series will also assist with training.”
10 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 11
圀 圀 圀 ⸀ 䄀 一 吀 伀 一 䤀 伀 䌀 䄀 刀 刀 䄀 刀 伀 ⸀ 䤀 吀 ⼀ 䄀 唀 倀 䠀 㨀 アパート
㠀 㔀 㠀 㤀 㐀
⸀⸀⸀ 挀 漀 洀 瀀 愀 挀 琀 椀 渀 猀 椀 稀 攀 Ⰰ
瀀 漀 眀 攀 爀 昀 甀 氀 愀 渀 搀
氀 漀 眀 琀 漀 琀 栀 攀 最 爀 漀 甀 渀 搀
昀 漀 爀 攀 砀 琀 爀 愀 猀 愀 昀 攀 琀 礀
⸀⸀⸀ 眀 椀 琀 栀 爀 攀 瘀 攀 爀 猀 椀 戀 氀 攀
挀 漀 渀 猀 漀 氀 攀 ⸀⸀ 礀 漀 甀 挀 愀 渀
渀 漀 眀 昀 漀 挀 甀 猀 漀 渀 琀 栀 攀
搀 攀 琀 愀 椀 氀 猀 ⸀⸀⸀
吀 栀 攀 漀 爀 挀 栀 愀 爀 搀 猀 愀 渀 搀 栀 椀 氀 氀 猀 椀 搀 攀 猀 瀀 攀 挀 椀 愀 氀 椀 稀 攀 搀 吀 爀 愀 挀 琀 漀 爀

PRODUCT NEWS
new generation
Two more powerful
models have been added
to New Holland’s Boomer
compact tractor range,
following its launch in
Europe last month
Above Two new Class 3 models from
New Holland have been released, the
47hp (35kW) Boomer 45 and the 57hp
(43kW) Boomer 55 (shown above)
New Holland has added two new models to its Boomer
range in Europe, saying they bring more power and
efficiency to the lineup.
The new Class 3 models are the 47 horsepower (35kW)
Boomer 45 and the 57hp (43kW) Boomer 55, which offer power
segments close to the 60hp (45kW) range to further increase the
lineup’s versatility.
New Holland spokesperson Edoardo Ronco says the new
models can perform more demanding operations such as
moving, transport and light tillage with ease.
“The Boomer range ... offers customers an extensive choice
of models covering a wide variety of applications that require
supreme versatility and manoeuvrability in a small tractor,” says
Ronco.
All models in the Boomer tractor range are compliant with EU
Stage V emission guidelines, with Ronco adding that the engine
and after-treatment system meet the standard with exceptional
fuel efficiency.
New Holland says that Boomer models with hydrostatic
transmission will incorporate the company’s EZ speed function,
which makes the engine speed up when the hydrostatic pedal is
pushed, as long as the hand throttle is in the low position.
“The function can also be deactivated, enabling the operator to
manage independently the hand throttle lever and hydrostatic
pedal in PTO [power take-off] applications where they need
to maintain a specific engine speed to in order to ensure the
required PTO speed,” says New Holland.
Standard cruise control is included on all hydrostatic Boomer
models, while the servo hydraulic assist option, which reduces
the effort required to operator the pedal, is a facet of all Class 3
cab models.
Boomer tractors include a new auto PTO function that can be
activated via a switch, which automatically turns off the PTO
when the three-point hitch is raised and re-engages it when
lowered.
Powered by a new three cylinder turbocharged engine that
features common rail direct injection technology, the Boomer
tractors pack a punch, delivering a powerful performance
and outstanding torque. For the Boomer 55 model – the
most powerful of the range – the engine can reach 188Nm at
1,600rpm and a large radiator and cooling fan help keep the
machine fuel efficient.
The fuel efficient components introduced to the Boomer range
has extended to a new 540E PTO setting in the Class 3 models,
which ensures PTO speed never exceeds the rpm target by
more than 10 per cent to keep consumption down.
All Class 2 and 3 models include the high-comfort Boomer
Suite inside the cab, which offers operators improved visibility
and ergonomic controls, plus a renewed dashboard including
vehicle speed LCD readout.
new
60 hp tractor
4 CHOICES WITH
LOADER FROM
$41,200
get ready for spring
OFFER ENDS 31ST AUGUST 2021
WHILE STOCK LASTS
t613 manual features
• Air-Con Cabin or
Folding ROPS
• 12 speed with shuttle
• 4 cylinder diesel engine
for power and torque
• 1,500kg 3 point linkage
for a large range of
attachments
• Flat operator’s platform
for unobstructed access
• 4-in-1 bucket with
Euro hitch
t613 hst features
• Air-Con Cabin or Folding ROPS
• 3 range hydrostatic
transmission
• Side-by-side HST pedals
• Auto-throttle control for easier
HST driving
• 4 cylinder diesel engine for
power and torque
• 1,500kg 3 point linkage for a
large range of attachments
• Flat operator’s platform for
unobstructed access
• 4-in-1 bucket with Euro hitch
KOREAN
This little rippa 60hp utility tractor including loader and 4-in-1 bucket is full of features. The quiet engine is a
real performer and the low NVH makes it a pleasure to operate. Tight turning circle for great manoeuvrability.
Dealer delivery charges apply. Ask us about Inlon Finance. # Subject to eligibility.
Quality Made in Korea. Great value tractors packed with generous
features. Tractors from 19 to 100HP, made strong for the Australian farmer.
For more information
and your nearest dealer
1800 849 090
www.tym.ag/727
12 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 13
GET USED
TO BEST IN CLASS
When it comes to Agricultural and Forestry land clearing, FAE has been
the top choice for rock crushers, stump grinders, forestry mulchers and tillers.
FAE supplies models to suit a variety of heavy duty applications with a wide
range of tractor horsepower.
Contact us:
1300 981 337 / +61 3 9706 4088
or email info@fae-ap.com.au
fae-group.com

COVER STORY
a cut above
With a high-spec engine,
redesigned Maxivision
cabin and Trimble
precision tech as standard,
the seven models in Deutz-
Fahr’s diesel-powered
Warrior tractor range are
fighting fit and ready to go
Above: Deutz-Fahr’s Warrior range
comprises seven models ranging from
171 to 336 horsepower, including the
9340 pictured here
You’ve got the latest style
engine, which gives you a
constant torque.
Two words keep coming up when discussing Deutz-Fahr’s
new range of Warrior tractors – comfort and efficiency.
Sporting black livery, rather than the traditional green the
German manufacturer’s tractors are known for, the Warrior
is a high-end tractor with features and upgrades befitting of
the evolution.
The Warrior is a six-cylinder tractor that the company says has
been specifically designed to suit Australian farmers.
Tractors in the Warrior range, which comprises seven models
ranging from 171 to 336 horsepower (128 to 251kW), are fitted
with Deutz engines and run on straight diesel without the need
for AdBlue or a diesel particulate filter.
“That’s a key selling point in the agricultural industry,” says
product manager at Deutz-Fahr distributor PFG Australia,
Anthony Darveniza.
“We’re not going back to a lesser-spec engine; you’ve got the
latest style engine, which gives you a constant torque.
“It means the tractor doesn’t have to change gears or alter
itself to keep up to the vehicle’s speed or the conditions it needs
to work at.
“It’s a very fuel efficient engine as well, which Deutz is
synonymous for.”
One big feature of the 6165 and 6215 Warrior models is RC-
Shift transmission, which Deutz-Fahr says “enables the driving
experience of a variable transmission at a fraction of the cost”.
The RC-Shift models can run as a fully automatic tractor, with
a separate mode available for road driving rather than in a
paddock, or they can be operated as a manual with 54 forward
and 27 reverse gears.
Both the 6165 and 6215 models also offer an alternative –
tractor transmission variable (TTV) transmission – which is also
the transmission on Deutz-Fahr’s larger 7250, 8280 and 9340
models in the Warrior range.
TTV has been a feature of Deutz-Fahr’s tractors for two
decades and works as the name suggests.
The company says TTV “combines the efficiency of mechanical
components with the comfort and smoothness of a hydrostatic
system”, with the percentage of mechanical components used
being about 80 per cent for field work and 90 per cent for
transport work at a faster speed.
The Warrior tractors made their first Australian appearance at
Farmfest in Toowoomba in June.
Cabin comfort and in-built technology are two other areas
where Deutz-Fahr aims to make the Warrior series stand out.
The Maxivision cabin has double-glazed glass and is an
update on the original Maxivision cabin, which was part of the
company’s previous 6-series tractors.
Inside the cabin, operators will find a host of features and
touches that show attention to detail.
These include a MaxCom armrest control, with the majority
14 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

COVER STORY
of tractor functions able to be controlled from the joystick, a
Bluetooth MP3 player with acoustic technology, digital display,
automatic climate control with completely reworked and
optimised air conditioning, plus other touches such as carpet
floormats and a fridge compartment for a drink bottle.
Darveniza says the double-glazed glass is a good example
of a simple feature added to the Warrior tractors that carries
big benefits.
“The double-glazed glass reduces the noise and heat into
the cab,” he says.
“It’s something so simple but that reduces the output the air
conditioner has to do to keep the cabin cool, so in doing that
you’re reducing the fuel cost as well.
“The automatic climate control that’s installed has got sensors
around the cabin and adjusts the temperature and output of the
air conditioner unit to make sure you get the correct air flow and
temperature to the operator.”
Technological advances are not just limited to comfort, though.
All of Deutz-Fahr’s Warrior tractors are fitted with Trimblepowered
hydraulic steer precision agriculture systems and
ISOBUS connectivity as standard.
Trimble’s GFX-750 and NAV-900 precision agriculture
technology makes use of the features the popular ag-tech
company is known for, such as positioning and guidance control
plus cloud-based data exchange, while ISOBUS is also a crucial
element as the ‘common language’ of tractors.
Other important features on Warrior tractors are a stainless
steel trim around the exhaust, front axle and cabin suspension,
headland management system and the ability to operate front
and rear implements simultaneously.
The 8280 and 9340 TTV tractors fitted with 60km/h transmission
also have front dry disc brakes, which are new for Deutz-Fahr
tractors in Australia, and IF wheel equipment to improve traction
and compaction.
Each model is backed with a three-year or 2,500 hour warranty
and a capped price service offer for the same period, PFG says.
Engage Ag Toowoomba director and sales manager Michael
Cook says the initial public reaction to the Warrior tractors has
been positive.
“The new colour scheme has obviously drawn some people in but
it’s the three-year warranty and the Trimble guidance system that
comes as standard that has offered a desirable package,” he says.
When summarising the Warrior, Darveniza goes back to the
themes of comfort and efficiency.
“It’s a deluxe tractor that will suit our higher-end and give extra
comfort,” he says.
“It’s got everything you need in a high-end tractor without being
overly complicated.
“You’ve got the efficiencies and technologies of the tractor to
make it fuel efficient, but foremost is to make the driver more
efficient in the practices they’re doing but also being more
comfortable in doing that work, especially when they’re spending
long hours in the tractor.”
Top: The 8280 and 9340 TTV tractors fitted
with 60km/h transmission also have front
dry disc brakes
Above: The 6215 Warrior, pictured here
and on the cover of this issue, offers tractor
transmission variable (TTV) transmission
The double-glazed glass
reduces the noise and
heat into the cab.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 15

PRODUCT NEWS
1
New
Technologies
Chris McCullough reports
on the European launch of
the Valtra N and T Series
tractors, now available for
order Down Under
The new N and T Series
models are available
immediately.
Valtra has added a host of new fifth generation tractors
to its already bulging portfolio, this time in the N and T
Series, all destined for the Australian market.
After launching the smaller fifth generation G and A Series
tractors late last year, the focus now is on even more
technology and smart solutions in the new N and T Series
tractors.
This most recent launch is to further mark 2021 as the 70th
anniversary year for the Finnish manufacturer and there are
more celebrations to come.
Valtra vice president of sales and marketing Mikko Lehikoinen
says that these tractors have new smart functions and are
comfortable and easy to operate.
“We have made plenty of improvements in the new series
based on customer feedback on our award-winning fourth
generation tractors. Precision farming is at the centre of the
new generation and each new model is available with Valtra
Connect,” says Lehikoinen.
“New legislation, such as the European Green Deal, is
accelerating the need for precision farming and agriculture
will change more in the coming years than it has changed in
recent decades.
“We believe that precision farming technology will play a key
role in achieving sustainability goals. Ensuring that the right
technology is used in the right place at the right time will help
improve agricultural productivity. Valtra is ready to support
farmers in this change.”
NEW FEATURES
The fifth generation N and T Series tractors come with
redesigned cabs, a new look, new transmission and engine
features, and a completely new smart display.
One of the most visible new features on the tractors is the
display on the A-pillar, which replaces the traditional instrument
panel behind the steering wheel and where all the important
information can be easily seen on the colour screen.
The top of the display always shows default information, such
as the driving speed, engine speed and time. Below that, the
operator can select information for controlling the tractor and
implement, precisely in the desired format. The display also
shows the radio station and smartphone information over
Bluetooth.
The same display can also be used on HiTech and Active
models to show all engine, hydraulics and transmission settings.
The display presents all settings and stages clearly, allowing the
operator to get much more out of the tractor.
On Versu and Direct models, the A-pillar display and
SmartTouch divide the tasks according to suitability and also the
preferences of the operator.
A THOROUGH REVAMP
When climbing into the cab of the fifth generation N or T Series,
it is obvious that the tractor has been thoroughly revamped. The
steering column is completely new and adjusting the position of
the steering wheel is now easier.
16 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

PRODUCT NEWS
2 3
4
Valtra’s acclaimed forward-reverse shuttle lever has been
updated, making it now easier to change directions when
switching between different controls such as the SmartTouch
lever or the TwinTrac shuttle. The steering wheel is a little
bigger than before but still handy in size, as is characteristic
of Valtra tractors.
Starting off in the B and C speed ranges is easy, even with a
heavy load, thanks to the new Start Boost feature. Changing
between speed ranges is now faster, which is especially
noticeable at road speeds.
AT HOME IN THE CAB
Operators can carry out work more efficiently when based in a
comfortable cab, says Valtra.
In SmartTouch models, the right side of the cab has been
redesigned and the seat swivels even more to the right. The
right control panel also has a handy phone holder and optional
USB charging points for mobile phones, tablets and other
electronic devices.
The upper part of the backrest on the new generation Valtra
Evolution seat swivels with the driver and also provides support
when the driver has partially turned around to look at the
implement at the rear.
A higher-quality dark Premium interior is available as an option
in the cab and includes, for example, a leather-covered steering
wheel, partially chrome pedals and rubber padding at the
bottom of the storage compartments.
EVEN SMARTER MODELS
Around two in three new Valtra tractors are currently equipped
with automated steering or advanced smart farming solutions.
Customers can also specify their new N or T Series tractor with
Valtra Guide autoguidance and smart farming features such
as Task Doc and Section Control. Task data can be transferred
seamlessly between the tractor and farm management software.
The brand-new Auto U-Pilot combines Valtra’s innovative
headland management system with Valtra Guide. Auto U-Pilot
controls the implement, with more precision in the headland,
reducing the amount of attention required by the operator and
making their job easier.
The amount of software options is increasing rapidly with the
growth of smart farming technology, and Valtra customers can
easily update the latest features to their SmartTouch tractors.
AVAILABLE IMMEDIATELY
The new N and T Series models are available immediately.
To mark the 70th anniversary, Valtra will also manufacture 70
specially-equipped limited ‘Red Edition’ tractors available in the
T Series (T174e to T254), to be sold worldwide.
These anniversary models feature a deep red metallic
paint reminiscent of Valtra’s roots 70 years ago. The red colour
is also highlighted in the details of the tractor, including in
the stitching of the leather interior and the interior light. The
anniversary model has black rims and a 70 years logo on the
door hinge.
1. The T155 has a six-cylinder Agco engine
providing 165hp (121kW)
2. A higher-quality dark Premium interior
is available as an option and cabin
upgrades include the new generation
Valtra Evolution seat
3. The compact Valtra N Series is the agile
workhorse of the Valtra family
4. The fifth generation of N and T models
come with the Valtra Smart Farming set of
technologies to aid the operator. To mark
Valtra’s anniversary year, 70 Red Edition
specially-equipped T series tractors will
be manufactured
Changing between speed
ranges is now faster.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 17

INDUSTRY
record breaker
ABARES predicts
Australia broke agricultural
production records in 2020–
21, but a need to rebuild
herd sizes might see export
earnings fall in the coming
financial year
Above: Australian agriculture will yield
a record-setting $66.3 billion worth
of produce in 2021–22 as favourable
conditions and high livestock prices
continue to drive up value
The pace of Australian
grain exports has been
faster than expected.
Australian farmers are poised to break the national
farmgate record in 2020–21, with figures indicating the
agricultural sector will yield $66.3 billion of produce over the
coming year.
The new estimates, detailed in the June 2021 Agriculture
Commodities Report released by the Australian Bureau of
Agricultural and Resource Economics and Sciences (ABARES),
reflect a growth of $400 million since the last report was
released in March, with the overall farmgate value representing
an eight per cent increase on the drought-affected 2019–20
financial year.
ABARES has also lifted the anticipated income from agricultural
exports by $400 million, from March, due to high livestock prices
and faster than expected grain exports following the bumper
winter harvest.
That said, export earnings are still forecast to fall by three per
cent to just under $47 billion in 2020–21, due to lower volumes
of livestock exports.
With livestock producers taking the opportunity to rebuild
their herds rather than slaughter, ABARES anticipates Australia’s
Farmgate production value will dip to $65 billion next year –
though the reduction in gross value will be alleviated by the
price of livestock, which remains at historically high levels.
Despite rising input costs across the entire industry, sectorwide
farm net cash income is also predicted to remain high
in 2021–22 at $21 billion; a figure slightly down on 2020–21’s
$23.8 billion.
ABARES acting executive director Jared Greenville says
the outlook is overwhelmingly positive for the agriculture
industry.
“ABARES has revised both the gross value of production and
the value of exports up by $400 million from earlier estimates,”
says Greenville.
“This is due to strong domestic livestock prices and because
the pace of Australian grain exports has been faster than
expected after harvesting the second largest winter crop
on record.
“We have seen an impressive turnaround in wheat, barley
and canola shipments. Particularly for barley, this result
demonstrates the resilience of supply chains, the benefits of
a diversified production base and access to a diverse range of
international markets.”
Ongoing ramifications of the COVID-19 pandemic resulted in
only minute impacts in the sector, the study found. A sharp
increase in fruit and vegetable prices was also avoided as
horticulture growers countered crippling labour shortages
because favourable seasonal conditions increased overall
production.
The reopening of economies around the world over the next
few years will also likely be beneficial to Australia’s agricultural
exports, with demand for beef, lamb, seafood and wine likely
to increase. Similarly, textile markets such as wool, cotton and
vegetable oils – which were affected by the pandemic – are also
forecast to recover as the global economy improves.
Disruptions caused by China’s ongoing tariffs on Australia
were identified as the biggest impact on commodity prices this
year as ongoing tariffs on exports such as wine and barley have
forced the market to adapt and fine alternatives.
“The largest impacts… occurred as a result of reduced market
access to China and the continuation of the effects of African
swine fever on Chinese pork production,” the report says.
“The pace of recovery from African swine fever in China and
other pork-exporting countries continues to create uncertainty
for global meat markets.
“No additional change to China’s tariffs on Australian barley
and wine are expected during 2021–22, and supply chains are
expected to continue to adapt to alternative markets.”
The ongoing mouse plague was also identified by ABARES as a
potential disruption to the sector’s gross farmgate value, where
damage contamination of summer crops and winter planting
has been affected throughout parts of Southern Queensland and
New South Wales.
ABARES says the impact of the mouse plague varies in each
individual paddock and contamination of grain and hay stored
on farms has been affected the most.
Harvested sorghum has been among those impacted, with
farmers experiencing reduced returns of the summer crop.
“The impact of mouse plagues has been locally devastating,
but on the national scale damage has been reasonably limited,”
says Greenville.
“The worst impacts have been to stored grain and hay
across parts of Queensland and New South Wales, although
high mouse activity has been observed in many parts of the
wheat belt.
“The worst of the mouse plague is likely to be behind us as
cool and wet winter conditions slow breeding rates.
“There does remain a risk of a resurgence if winter is warmer
than expected.”
18 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

GERONIMO FARM
EQUIPMENT
TradeFarmMachinery.com.au 19
LAND
ROLLER
SERIES
READY TO ROLL.
Harvest your crops worry free. Promote even germination. Crush crop residue.
The Land Roller series applies uniform weight and surface contact across your fields,
pushing rocks into the ground and leveling out clumps. The resulting smooth surface
provides even germination, faster spraying, robust crops, and a trouble-free harvest.
2
4
3
1
LAND ROLLER FEATURES
1 - Large Diameter Drums.
Larger drums provide an ideal combination of weight and
size to smooth the field without compaction.
2 - FORWARD Unfolding System.
The patented unfolding system goes from transport to field
mode in minutes while moving forward.
3 - Shorter Drum Segments.
Each drum floats independently, applying consistent ground
pressure and following the contours of your land.
4 - Pull Equipment in Tandem.
The FORWARD TM Unfolding System allows you to pull two or
more pieces of equipment in tandem, so you can work faster.
MADE TO WORK. BUILT TO LAST.
RM6710171
Ashley Webster
Ph: 0407 431 566
Head Office - 77 Pridham Street, Cowra
Office Number: 02 6341 3369
Email: sales@geronimo.com.au
Web: www.geronimo.com.au
Chris Sweeny
Ph: 0417 537 482

INDUSTRY
fields of gold
More land will be planted
in Australia overall in 2021–
22, Rabobank predicts,
amid good seasonal
conditions and encouraging
commodity prices
Above: Australia is on track for a second
consecutive near-record winter crop
planting following good seasonal conditions
and favourable prices
We see the premium
for malt barley over
feed barley increasing
this season.
Agribank Rabobank predicts Australian farmers will plant
about two per cent more land in 2021–22 than was planted
in the past financial year, putting the country on track for a
second consecutive near-record winter crop planting.
The prediction, released by Rabobank in its 2021–22 winter
crop outlook, suggests a total of 22.93 million hectares of crop
will be planted in the winter months.
The two per cent increase on last year will bring the total area
planted within one per cent of the national record for winter
crops, set in 2016–17, while the 2021 figure still represents a
figure eight per cent above the five-year average.
Leading the way in the near-record winter crop this season
is wheat, with an estimated harvest of 28.9 million tonnes;
followed by barley (10 million expected tonnes) and canola
(4.1 million tonnes).
Consistent seasonal conditions, including substantial rainfall
and good soil moisture, leading into the planting season has led
to the favourable outlook for most of Australia, something the
report’s co-author, Rabobank grain and oilseeds analyst Dennis
Voznesenski, says is a welcome segue into the planting season.
“With the Bureau of Meteorology forecasting a 60 to 75 per
cent chance of the east coast and South Australia exceeding
median rainfall for the next three months, this should set
crops up well and have a positive impact on yields in those
regions,” he says.
“For Western Australia, conditions have been very favourable
for the opening to the planting season due to the rainfall
associated with Cyclone Seroja. So, while WA is only forecast
to receive average to below-average rainfall in the next three
months, the impact should be softened by the favourable soil
moisture at planting.”
Northern New South Wales had enjoyed “excellent opening
rainfall”, he added, but not every part of the country was so
fortunate.
“In parts of South Australia and western Victoria, less
favourable conditions have meant we will not be able to factor
in a year-on-year increase in area planted in those regions,
despite prices incentivising many other regions to expand
total area,” he says.
“So, the forecast of further rainfall will be particularly
welcome in South Australia and western Victoria, where the
soil moisture profile was far less optimal than hoped for coming
into planting.”
CHANGING CONDITIONS
Across the winter crop commodities, Rabobank’s outlook
indicates both wheat (three per cent increase) and canola (14
per cent) planting will improve to 13.3 million and 2.7 million
hectares respectively.
Such sizeable growth in canola stems from near-record
high prices for the oil seed, as well as China’s ongoing tariff
on Australian barley – which decreased by six per cent (4.2
million hectares) – as farmers make the switch to the more
profitable crop.
“Come harvest time, however, it may mean that there will
be increased harvest pressure on local canola prices,” adds
Voznesenski.
Oats have too declined this season, down eight per cent to just
0.9 million hectares.
The shift from both barley and oats to canola has also resulted
in additional implications for the agricultural sector, with most
farmers now opting to plant genetically modified (GM) canola
as opposed to non-GM – a move most notable in the growing
regions of Western Australia.
A similar trend can be seen with regard to barley, where
farmers have opted to grow feed barley instead of malt barley.
“With the premium for non-GM over GM canola declining
considerably, we have seen a greater uptake in GM canola this
year, with the biggest rise in WA. With non-GM canola supplies
tight around the world, this should support a rising premium for
non-GM,” Voznesenski says.
“With less malt barley being planted and world malt demand
recovering, we see the premium for malt barley over feed barley
increasing this season from its lows.”
PRICE OUTLOOK
The price of wheat is set to trade at about US$6.50 (A$8.60) per
bushel on the Chicago Board of Trade (CBOT) for most of the
first half of 2022, due in part to the low supply of global corn
stocks.
With the Chinese tariffs in place, the report also indicates the
price of barley will rely on the patronage of Saudi Arabia and
Thailand.
Canola stocks around the globe remain low and are expected
to remain on a similar theme, ending 2021–22 at a five-year low.
The downward trajectory of canola will mean prices in Australia
are likely to remain elevated.
The scope of lentil and chickpea prices may relax as
restrictions by the Indian government do likewise, however any
relaxation on access to lentils are expected through periods of
uptick rather than a sustained lifting in the price.
According to Rabobank’s Cheryl Kalisch Gordon, an export
program of “almost 20 million tonnes of wheat, 5.5 million
tonnes of barley and 3.1 million tonnes of canola”, is expected.
Global prices of most grains and oilseeds are expected to
remain elevated across the next year following the strong
demand and poor conditions in much of the world’s graingrowing
regions.
20 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 21
23 McCormick Road Kyabram Victoria 3620 / Ph: 03 585 22 444 / info@jnrengineering.com.au
LP Series
Introducing the LP8000, 8 meter or 6 meter
width Land Plane, twin mast independent for lift
precision, dragging capabilities of approximately
5 cubic meters.
DG Series
The DG Series is currently being manufactured in
3.6m or 4.2m width Drag Grader has independent
lift for laser precision. Dragging capabilities of
approximately 3.5-4.5 cubic meters
Bale Bull Round
The BBR maintains a strong robust design capable of handling
the heaviest bales. This machine is capable of carrying two
bales and feeds on both sides. It is one of the only machines in
the market that is able to feed the toughest of silage bales
HDE Ejector
Cut Sizes 3.6 & 4.2m -Rips -Carries -Cross levels -Laser levels.
www.jnrengineering.com.au
Leopard Ejector
Cut Sizes 3.0m, 3.6m & 4.2m-Rips -Carries -Cross Levels -Laser Levels.
HDB Bucket
Cut sizes 3.6m & 4.2m
-Rips -Carries
-Cross levels -Laser levels.
LB Bucket
Cut sizes 2.7m & 3.0m-Rips
-Carries -Cross Levels -Laser
Levels.
Bale Bull Square
Features an adjustable moving
arm for feed out control and
on road transport, capable of
carring two bales.
XSE Ejector
Cut sizes 1.8m, 2.4m
-Rips -Carries -Cross levels
-Laser levels
FFM-FP-5145966-TS-365
For more info, check out our YouTube Channel and Facebook Page under JN&R Engineering

INDUSTRY NEWS
positive outlook
An overwhelming majority
of farmers are confident for
the year ahead following a
strong start to the season,
according to a Rabobank
survey
Above: Confidence among Australian
farmers remains strong with favourable
conditions and good commodity prices
influencing their optimism
Australian farmers are collectively confident for a productive
year ahead, according to Rabobank’s quarterly rural
confidence survey.
Rabobank Australia chief executive Peter Knoblanche says the
survey painted an overall encouraging depiction of the country’s
agricultural sector, due to strong prices and good growing
conditions.
“There is certainly a view out there among many farmers that
business conditions right now are excellent. Many would say
it’s as good as it gets, and they can’t see how it could get any
better,” he says.
The survey reveals almost 90 per cent of Australian farmers
expect the excellent business conditions currently being felt
throughout the sector to either continue or improve across the
year ahead.
Of those, 35 per cent of farmers expect them to improve over
the year ahead – a five per cent decrease since the last survey,
released in March – while a further 54 per cent predicted the
current positive conditions would continue for the coming 12
months.
Of the optimistic farmers, 69 per cent cited good commodity
prices and 51 per cent of respondents cited good seasonal
conditions as reasons for a positive outlook.
Just eight per cent expected a deterioration in current
conditions, and only five per cent of these cited current mouse
plagues as their reason.
State by state, Tasmanian farmers were the most confident,
with 45 per cent tipping conditions to improve – a six-year high
for the Apple Isle that Rabobank says is likely due to optimism
within the dairy industry.
New South Wales, following boosts to water allocations and
another potentially large grain crop, also showed high levels of
optimism (44 per cent), while “the best start in a decade” for
Western Australia’s winter cropping season drove confidence in
the west.
After many years of drought, Queensland rural confidence
reached its fifth-highest level in 20 years, while confidence
remained high in South Australia despite notions easing slightly
following a dry run into winter. In Victoria, record-breaking prices
in livestock and dairy helped improve temperament against low
rainfall and labour shortages in the state.
Among grain producers, 57 per cent expected a similar year as
last year while 34 per cent foreshadowed improvement in the
industry. With a two per cent increase in hectares of crops this
year, the sentiment of farmers may be accurate.
For cotton farmers, 86 per cent were expecting a better
year than last – a 43 per cent surge since March – following a
boost in water supplies while livestock farmers’ optimism also
remains high as prices continue to reach heights not seen in the
Australian market before.
In dairy, 34 per cent expect improvements in conditions on the
back of strong milk prices and investment in dairy infrastructure.
“For most farmers, we are seeing a second year of very good
seasonal conditions, high to very high commodity prices,
low interest rates and favourable infrastructure investment
incentives from the government,” says Knoblanche.
“The benefit of another year like this for Australian farming
shouldn’t be underestimated. This will allow many farmers
to really consolidate their position after years of drought – to
further reinvest in their businesses to make them more efficient
and resilient and to expand and grow their businesses for the
future.”
About 40 per cent of the surveyed farmers expected their
gross farm income into increase, while another 45 per cent were
expecting similar incomes to the previous year.
high
stakes
Beef prices are at historic
highs, but these have been
more than offset in Australia
by a fall in production,
according to new data from
ABARES and Rabobank
Left: Cattle prices across the globe
continue to soar while in Australia, low
herd numbers and drought has led to a
disruption in the country’s cattle market
In its Q2 Beef Quarterly report, rural bank Rabobank says
the current global beef climate is ‘very tight’, with both
strong demand and lower herd numbers contributing to
growing beef prices.
The higher demand has been felt Down Under, where
successive years of drought and a large liquidation of the
livestock population resulted in Australia’s smallest beef cattle
herd in three decades.
Intense buying competition by producers was also noted as
a factor in the rising price of Australian cattle, with producers
looking to restock properties and generate value out of the
increased pasture production.
The disruption meant the Australian price of young cattle
jumped nearly 30 per cent in February 2020 and has since,
risen another 20 per cent to February 2021.
Rabobank’s Angus Gidley-Baird, who co-authored the report,
says the price increases had been impacted further by the
improved seasonal conditions in 2020, which have carried into the
current year.
“While lower volumes and higher prices make competing in the
global market more difficult, the tight market situation is working
in Australia’s favour and creating less resistance to our high
prices,” says Gidley-Baird.
“We believe that current cattle prices in Australia will ease as
cattle numbers increase and producer demand dissipates.
“However, as the supply chain overcomes the disruption here
and consumers adjust their price expectations, we believe the
market will adjust and a new baseline will be established.”
Data from the Australian Bureau of Agricultural and Resource
Economics and Sciences’ (ABARES) June Quarter Agricultural
Commodities report predicts that despite the high prices, the
gross value of Australia’s livestock production will be $30.8 billion
in 2020-21 – six per cent lower than the previous year.
For the year ahead, the value of livestock exports is expected
to increase by 11 per cent to just over $24 billion in 2021-22, with
a 16 per cent rise in export volumes lifting the value of beef and
veal exports by 14 per cent to $9.2 billion.
Beef export prices are not forecast to fall as much as saleyard
prices, because they are far less affected by domestic restocking
demand, ABARES says.
The Rabobank report also outlined how the country’s beef
sector may be returning to some level of normality, with producer
demand for cattle easing slightly and feeders taking a more active
share in the market in the first quarter.
The key markets of China (down seven per cent) and the United
States (down five per cent) lessened their imports of Australian
beef while smaller beef markets of Japan and South Korea lifted
slightly across the opening four months of the 2021 calendar year.
“However, with the tight global supply situation – underpinned
by Chinese demand which is expected to remain firm – we
believe the global market has seen a fundamental step up,”
says Gidley-Baird.
22 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

HD 6 SERIES
BUILT BY CATERPILLAR (QUINGZHOU) LTD
TradeFarmMachinery.com.au 23
WHEEL LOADERS
& EQUIPMENT
“BUILT BY
THE BEST”
The Hercules wheeled loader and equipment range built for the Australian agricultural
and construction environments. Feedlots, general farm use, material handling, quarries,
construction and waste recycling.
668D
Rated Power
178kw/240hp
Operating Weight
21,000kg
Rated Load
6,000kg
Bucket Capacity
3 - 5.5m 3
Cabin
ROPS/FOPS
Enquire about the
Hercules range today.
636D
Rated Load
3,500kg
Operating Weight
11,000kg
125hp
H737
Rated Load
3,000kg
Operating Weight
7,250kg
125hp
HERCULES 636D
130HP
HERCULES 656D
220HP
HERCULES 658D
220HP
HERCULES 668D
245HP
HERCULES 676D
270HP
All ‘6’ Series Built by Caterpillar (Qingzhou) Ltd
HERCULES 680D
310HP
QLD – NSW Steven - 0408 627 397
QLD – NSW Ross - 0488 062 696
28 Old Pacific Highway Yatala Q 4207
Ph: 07 3807 4333
www.bmesales.com.au

TRADE
taking
stock
Anthony Wingard takes a
look at the hotly anticipated
Free Trade Agreement
struck last month between
Australia and the UK – and
what it might mean for
farmers
Above: Stiff Bikkies: The hotly anticipated
Free Trade Agreement between Australia
and the United Kingdom will create new
challenges for Australia’s agricultural
workforce, but new opportunities for beef
and lamb exporters
Beef tariffs will be
eliminated after
10 years.
Last month, Australian Prime Minister Scott Morrison struck
an agreement in principle on a Free Trade Agreement (FTA)
with the United Kingdom, after four rounds of negotiations
stemming back to mid-2020.
The agreement, in principle, means the terms of the FTA have
been negotiated and agreed, although are yet to be made
official.
Still, the FTA with the UK – Australia’s largest trade
agreement with any country outside of New Zealand –
represents a significant point in time for our country’s
agricultural sector.
At the announcement of the FTA, UK prime minister Boris
Johnson said the deal “will be good news for the agricultural
sector on both sides”.
Among the many intricacies of the FTA, the deal will improve
the market access for Australian agricultural and industrial
products as well as reducing costs and barriers to trade, with
the removal of longstanding tariffs on many of Australia’s
primary industries.
Many of the changes will be implemented over the
forthcoming 15 years.
MEAT ON THE BONES
Cattle growers will be big winners under the new deal, with
increases in tariff-rate quota (TRQ) volumes over the next 10
years – meaning more beef can be exported without attracting
additional costs.
Under the current system, the UK only imported 1,567 tonnes
of beef from Australia, which, according to the National Farmers
Federation of Australia (NFF), is just 0.15 per cent of Australia’s
overall beef exports.
Under the new FTA, Australian beef growers will have access
to a duty-free transitional quota of 35,000 tonnes into the UK
each year. The TRQ will rise in equal instalments to 110,000
tonnes in the tenth year.
“In the subsequent five years [years 11–15] a safeguard will
apply on beef imports exceeding a further volume threshold
rising in equal instalments to 170,000 tonnes, levying a tariff
safeguard duty of 20 per cent for the rest of the calendar year,”
says federal minister for trade, Dan Tehan.
“Beef tariffs will be eliminated after 10 years.”
It’s a similar story for lamb. After 10 years, tariffs on lamb will
also be eliminated and, in the initial decade, a duty-free quota
of 25,000 tonnes of sheep meat will be available, rising in equal
instalments to 75,000 in the tenth year.
Again, a safeguard will apply on sheep meat imports that
exceed a volume threshold rising to 125,000 tonnes from years
11 to 15.
“The volume of Australian red meat to the UK in the context of
the UK’s total red meat imports and Australia’s total exports, is
very, very small,” says NFF president, Fiona Simson.
“The aim of any free trade agreement is to provide both
parties’ options. Australian red meat producers would like
to have the option to export to the UK if, and when, the UK
needs it.”
Until now, the UK market for Australian sugar – our second
largest producing field crop behind wheat – has been virtually
non-existent, however, under the FTA, sugar will be exported to
the UK for the first time.
Tariffs on sugar will be eliminated over eight years and the
quota will be immediately lifted to 80,000 tonnes per year, rising
by 20,000 tonnes yearly.
Similarly, other crops and produce from Australia, including
cheese, other dairy products and milled rice, will also see their
tariffs phased out over the initial 15 years of the deal.
OFF TO WORK
The FTA will also see changes in the ag-labour space, with a
new ‘agriculture visa’ introduced, allowing citizens from both
countries to work freely in the other.
The agricultural visa also means UK backpackers will no longer
be required to fulfill a certain number of hours in agricultural
work to have their visa extended by another year.
“It will make it easier for British people, for young people, to
go and work in Australia without the traditional compulsion of
having to work on a farm for 80 days, which used to be the law,”
said prime minister Johnson.
However, federal minister for agriculture, David Littleproud,
says the UK FTA will account for 10,000 lost season workers
each year.
The removal of this requirement for UK backpackers will create
a sizeable void in an already bleeding workforce, something
Morrison alluded to when he called the agriculture workforce
shortage “one of our biggest challenges we have”.
To counter this, the Australian government has unveiled a new
visa scheme, which will target the 10 nations of Association of
South-East Asian Nations (ASEAN). The details of the visa are
expected to be confirmed before the end of the year and are
yet to be negotiated with the ASEAN nations.
Littleproud says the new seasonal ag visa will likely mirror
the existing Seasonal Worker Programme (SWP), including
protections to ensure workers’ safety, health and financial pay,
“The new visa will also set up the industry for the future and
will address a key brake for many agriculture industries – the
availability of labour,” Littleproud says.
Should the ASEAN seasonal worker visa be agreed and
implemented by the time of September’s harvest, the labour
vacuum in the ag workforce will be somewhat resolved,
however, the safety and financial necessities of the workers
will also need to be.
24 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

BERENDS
TradeFarmMachinery.com.au 25
The Largest Range of Australian Made Farm Machinery
Australia’s No1 locally
built mulcher for the
last 25 years. Available
in Low Body or High
Body models in
various sizes. Great for
clearing up paddocks
and bush blocks.
Australian made
aerators using the
Shattertine technology.
Great for cracking
open hard ground and
rejuvenating pastures.
The best value for
money Front End Loader
mounted post hole digger
on the market. Standard
with Eurohitch connection
with other styles available.
Various augers sizes and
types available
Large range of
linkage and trailing
disc ploughs to
suit all tractors and
applications.
Australian Made
slashers with 5 year
gearbox warranty. Various
sizes and models in single
and twin rotor set-up.
Great value and strength.
Also available
in galvanised.
10 ‘ & 12’ Trailing
Grader Blades.
2000kg in weight
Best value for money
blade of its type
Huge range of
linkage models
available also.
Contact your local Berends dealer for more information or call direct on (03) 9791 2494
www.johnberendsimplements.com.au | sales@johnberends.com.au
FFM-FP-5030609-TS-380

EVENT NEWS
events calendar
Here are upcoming
Field Day and
agricultural events for
2021. Information was
current as of going to press
Royal Darwin Show – Darwin
With the aim of promoting, encouraging and assisting the
development of primary industry, commercial and cultural
activities, mining and industrial resources of the Northern
Territory, the Royal Darwin Show has livestock, a
horticultural pavilion, food, entertainment and a carnival.
WHEN: July 22-24, 2021
MORE INFO: darwinshow.com.au
Sheep Connect – Hamilton
Sheepvention Rural Expo has been replaced this year
with Sheep Connect 2021 due to COVID-19 restrictions.
Along with trade exhibitors, Sheep Connect will include a
one-day conference on the Monday and a ram sale on the
Tuesday.
WHEN: August 2-3, 2021
MORE INFO: www.hamiltonshowgrounds.com.au
Mallee Machinery Field Days – Speed
Mallee Machinery Field Days brings together more than
8,500 visitors, and 350 exhibitors, with an estimated
$100 million worth of equipment and machinery on site.
Held on the first Thursday of August and preceding
Wednesday every year.
WHEN: August 4-5, 2021
MORE INFO: www.mmfd.com.au
Royal Queensland Show – Brisbane
The Royal Queensland Show (Ekka) is Queensland’s
largest annual event, attracting on average 400,000
people. The Ekka showcases the best of Queensland,
attracting more than 21,000 competition entries from
woodchop to giant vegetables, 10,000 animals from beef
cattle to cats and dogs, world-class live entertainment,
award-winning food and wine, carnival rides and
showbags, family shopping, educational activities
and much more.
When: August 7-15, 2021
More info: www.ekka.com.au
Mingenew Lions Midwest Expo –
Mingenew
The largest agricultural field day in Western Australia’s
Mid West, this expo aims to provide a venue for
businesses to exhibit to the area’s regional and remote
communities. It showcases the future of farming and
agricultural technologies and plays host to some of the
biggest names in the industry, providing an exciting
insight into what the agricultural sector has to offer and
highlighting the technologies of tomorrow.
When: August 11-12, 2021
More info: www.mmwe.com.au
AgQuip Field Days – Gunnedah
Arguably one of the biggest field days on the Australian
calendar, AgQuip has been supporting the agriculture
world from its permanent, purpose-built site just outside of
Gunnedah, NSW, since 1973. Attracting more than 100,000
visitors each year and showcasing over 3,000 products,
this is a much anticipated event for both exhibitors and
attendees alike.
When: August 17-19, 2021
More info: acmruralevents.com.au/agquip/home
Dowerin Field Days – Dowerin
Dowerin Field Day is the largest field day in Western
Australia, attracting more than 25,000 visitors each year.
Around 7,000 broadacre farmers attend the event each year
and over half of all visitors stated their reason for attending
was a strong interest in agricultural products and services.
The Field Days has also won several tourism awards at a
state and national level.
When: August 25-26, 2021
More info: www.dowerinfielddays.com.au
Newdegate Machinery Field Days –
Newdegate
On the first Wednesday and Thursday of September
each year, the town of Newdegate hosts one of Western
Australia’s premier agricultural events, the Newdegate
Machinery Field Days. Machinery, technology and research,
animals and livestock, outdoor and camping exhibits,
art and photography, fashion, show bags, food and wine,
local produce, live entertainment, and much, much more
make this two day event one not to missed, promoting and
celebrating agriculture.
When: September 1-2, 2021
More info: www.newdegatemachineryfielddays.com
Riverland Field Days – Barmera
Held over a two day period, the Riverland Field Days
are a staple in the region. With over 350 exhibitors and
approximately 30 caterers, there is something for the whole
family. The field days include the latest in agricultural
machinery, equipment and services, demonstrations,
information sessions, activities, entertainment, tastings,
trade exhibits and much more.
When: September 17-18, 2021
More info: www.riverlandfielddays.com.au
For the full year’s calendar of events: tradefarmmachinery.com.au/events
2.5T - 21T AVAILABLE NOW, NATION WIDE.
FROM YOUR LOCAL DIECI DEALER.
1300 888 479
26 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 27
AGRI MAX 70.10
NEED A TOUGH, RELIABLE MACHINE TO LIFT,
REACH OR MOVE JUST ABOUT ANYTHING ON
YOUR FARM?
Max Capacity: 7,200kg
Max Lifting Height: 9.65m
Max Power: 125hp
Max Speed: 30km/h
Powerful and robust, the 70.10 is ideal for heavyduty
applications and work environments where
there is a need to handle large volumes and reduce
work cycles. Equipped with Powershift transmission,
6 speed manual / automatic gearbox, inching pedal
control, which guarantees maximum power at all
operating speeds, as well as a zero-shock system,
which ensures a high degree of operator comfort. It’s
easy to see why the Agri Max is the ideal machine for
your agricultural application.
Contact Dieci on 1300 888 479
or visit www.dieciaustralia.com.au

EVENT NEWS
1
queensland’s finest
FarmFest returned in 2021
with over 20,000 people
visiting Toowoomba on
the first day alone. With
so much to offer, Anthony
Wingard checked out the
best of FarmFest
The Farmall M includes a
redesigned cab, similar to
the JX model but with a
more ergonomic interior.
After a COVID-19 induced hiatus, FarmFest roared back
to life in early June, with sizeable crowds visiting the
Toowoomba event to enjoy the latest and best the agricultural
sector has to offer.
Farms and Farm Machinery dropped by to check out the best
new machinery – and a few old favourites.
CASE IH FARMALL M
Case IH debuted its new compact tractor – the Farmall M –
which combines many of the features from the Farmall U,
such as the transmission, brakes, hydraulics and electronic
draft control, with the Farmall JX’s new front axle design and
superior engine.
The Farmall M is available in both 90 and 110 horsepower
(67 and 75kW) models and also comes with Case IH’s new
ActiveDrive4 automatic transmission, which replaces the clutch
with buttons to improve gear changing. ActiveDrive4 covers
a range of speeds, from 0.28km/h to 40km/h, and features 32
forward and 32 reverse gear options.
Manufactured in Case IH’s Turkish factory, the Farmall M
includes a redesigned cab, similar to the JX model but with a
more ergonomic interior, and a repositioned air-conditioning unit
to make the cab even more spacious for the operator.
Case IH says the tractor is ideal for cattle and dairy operations
but adds its versatility means they can undertake a wide range
of tasks.
DEUTZ-FAHR WARRIOR RANGE
Deutz-Fahr’s new range of Warrior-branded tractors has touched
down in Australia with the six-cylinder machines ideal for
farming in Australian conditions.
The Warrior range spans across seven different models of
Deutz-Fahr tractors, with the horsepower options ranging from
as low as 171hp up to 336hp (128 to 251kW).
Among the Warrior range are the 6165 and 6215, which feature
RC-shift transmission – essentially making the models run as a
fully automatic tractor; with the option to also run as a manual
with 54 forward and 27 reverse gears.
The 6165 and 6125, along with the larger 7250, 8280 and 9340
models, also offer an alternative variable tractor transmission
across the Warrior range which uses only 80 per cent of
mechanical components in the field.
Deutz-Fahr’s Warrior range is ideal for small farming operations,
including graziers and dairy ventures.
FENDT 716
Fendt’s latest 716 tractor offers operators a much more
refined cabin experience, thanks to the new FendtOne
technology system.
The new ergonomic armrest and hand controller for operation
are big features of the 716, while a number of display screens
and tablets, utilising the FendtOne technology, offer operators
the best in data.
A 10-inch (25.4cm) dashboard, 12-inch (30.5cm) terminal
and 12-inch roof terminal display provide ample space
to display information and data, while the 3L joystick and
multifunctional joystick makes operating the 716 a relaxing,
flexible experience.
Both joysticks have freely assignable buttons, offering the
driver even more flexibility while the 3L joystick, with Fendt’s
front loader which has a third valve, means three functions can
be undertaken at once.
NEW HOLLAND T8 350 GENESIS
The big unit of New Holland’s tractor range, the T8 350 Genesis
is among the world’s most powerful conventional tractors.
The T8 350 Genesis encompasses the power of 350
horsepower (261kW) but is efficient enough to meet Tier 4B
emissions standards.
To make life just a bit easier for operators, the New Holland
designers made the tractor more visually appealing with small
tweaks, such as the display screen moving places to sit on the
steering column.
New Holland’s SideWinder II armrest was also on show –
another fresh design that makes operating the T8 350 genesis
comfortable and intuitive, with all key functions placed
strategically so they can be operated using just the fingertips.
MASSEY FERGUSON S 5710
Increased visibility from inside the cab has been the biggest
focus for the designers of Massey Ferguson’s S 5710 tractor,
with wide glass doors and curved quarter windows offering the
best visibility in the field.
The sloped hood on the S 5710 is also a distinguishing
feature, giving drivers even more vision inside the cab when
manoeuvring around the field.
At 105hp (78kW), the S 5710 gets around thanks to a 4.4-litre
four-cylinder Agco engine that complies with Stage V emissions
standards.
28 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

EVENT NEWS
2
3
4
6
5
7
Massey Ferguson’s impressive Dyna-4 transmission – a 16
forward and 16 reverse transmission, which offers simple
and convenient control – is optional on the S 5710, while the
operation of gears can be changed either by the T-bar on the
right or the left-handed Power Control Lever.
1956 COCKSHUTT 50 DELUXE
Built in the 1950s out of Ontario, Canada, this Cockshutt 50 has
been restored with a new paint job and decals to mirror the
same 50 D models in its day.
With a six-cylinder diesel Buda engine under the hood, the
Cockshutt produces 50hp (37kW) and uses 34-inch (86cm)
wheels, which is quite large for its time.
A true marvel of its time, this model was one of the first
tractors to have a live power take-off (PTO) not connected to
the engine, letting operators engage the PTO without stopping
the machine.
The model 50 was also the last of the Cockshutt branded
tractors, before they began rebranding them as ‘Blackhawk’
models to promote the acquisition of Ohio Cultivator Company
from 1956 onward. Nowadays, this Cockshutt 50 D is in the safe
possession of John and Jeanette Kummerow, where it finds its
place among a collection of over 50 tractors.
1980S FIAT 955 CRAWLER TRACTOR
This Fiat 955 still boasts most of its original components from its
heyday in the 1980s, with the engine, gearbox, tracks and paint
all in original condition.
The 90hp (67kW) machine is one of the only crawler tractors
from its time with three-point linkage PTO while the fivecylinder
engine has also proved quite fuel efficient over
the years.
Developed and manufactured in the hills of northern Italy,
the 955 thrives in hilly conditions where its tracks and versatility
make it ideal for clearing wood and weeds in thick hill areas,
however, it has still proven its worth in row-cropping functions
as well.
Most 955s can also be fitted with a blade at the front, including
most others still in operation around Australia, where they can be
used for small, nimble bulldozing operations.
1. Deutz-Fahr’s new Warrior range of sixcylinder
tractors is now available
2. The Case IH Farmall M is available in 90 and
110 horsepower (67 and 75kW) models
3. This 1956 Cockshutt 50 has been restored
4. Fendt’s latest 716 tractor comes with the
FendtOne technology system
5. This 1980s Fiat 955 crawler tractor still has
many of its original components
6. Massey Ferguson’s S 5710 tractor has been
designed with a focus on operator visibility
7. The 350hp (261kW) T8 350 Genesis from
New Holland
This Fiat 955 still boasts
most of its original
components from its
heyday in the 1980s.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 29

INDUSTRY NEWS
bromadiolone rejected
Australia’s pesticides
regulator will refuse an
emergency request to
approve bromadiolone for
use as a broadacre mouse
poison in NSW
Above: APVMA will refuse an emergency
request to approve bromadiolone for use as
a broadacre mouse poison in NSW
The Australian Pesticides and Veterinary Medicines Authority
(APVMA) plans to refuse an application from the New
South Wales Department of Primary Industries (NSW DPI) for an
emergency permit to poison grain with bromadiolone in a bid to
curtail the mouse plague that is sweeping the state.
The NSW government announced a program in May to fund
the treatment of farmer-supplied grain with bromadiolone, with
the plan for the poisoned grain to be used either in a trail or in
bait stations surrounding a crop.
But the program relied on the APVMA accepting NSW’s
application to allow bromadiolone to be used as a broadacre
mouse bait, as it is currently only registered for use indoors and
around sheds.
This is because bromadiolone builds up in the food chain,
meaning that any animals that eat the poisoned mice are also
at risk of poisoning.
APVMA chief executive officer Lisa Croft says in a statement
that the APVMA is not satisfied that using bromadiolone around
the perimeter of crops meets the statutory criteria for safety,
specifically in relation to residues and the environment.
“Before the APVMA is able to approve any application, we
must be certain that it is safe, that it will work, and that it will
not prevent our farmers from selling their produce overseas,”
she says.
“The APVMA’s primary concern is environmental safety,
particularly in relation to animals that eat mice.
“Although the APVMA intends to refuse this particular
application, we have approved six other emergency permit
applications to give farmers extra mice control options,”
she adds.
These permits relate to the use of zinc phosphide poisons,
which are understood to be similarly effective, but which do
not accumulate in the body.
“The APVMA will continue to prioritise emergency use
permit applications in relation to the mouse plague,” the
authority says.
It adds that the NSW DPI has 28 days to respond to the
proposed decision to refuse the permit application, with the
authority to consider any information provided before making
a final decision.
The news came one day after the release of the NSW state
budget, which included a $150 million Mouse Control Package
to help farmers, small businesses and households fight the
mouse plague currently impacting parts of regional NSW.
NSW also offered primary producers a rebate of 50 per
cent on zinc phosphide purchases, up to $10,000, in order to
boost farmer confidence in making advance orders on zinc
phosphide ahead of Spring.
30 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 31
02 4423 3499
After Hours 0429 233 577
sales@elgra.com.au www.elgra.com.au
21 Central Ave, South Nowra, NSW, 2541
HYDRAULIC PERCUSSION
POST DRIVERS FOR TRACTOR,
SKIDSTEER & FEL
Cement
Mixer
(Paddle)
2 Sizes available,
Suit Skid Steer,
Excavator, 3PL, FE
From
$7,920 + GST
PDX
Series
4 Cell Options,
Suit Skid Steer,
Excavator,
FEL or any
wheeled
loader.
From
$8,310 + GST
89
Series
Driver
Available in 2.5
(Standard) & 3.6
(Hi Lift) under
the Anvil, 4 Cell
Options From
From
90
Series
Driver
Designed
specifically
for Skid Steer,
Excavator, FEL
or any wheeled
loader. 4 Cell
Options.
From
$16,230 + GST $13,990 + GST
FFM-FP-5034644-TS-400
Australia’s most POWERFUL & VERSATILE Percussion Driver
***All El-Gra Post Drivers comply with Work Cover and other State laws.***

OPINION
Left: Tractor sales are 37 per cent ahead
of the previous 12-month period
may flowers
More than 15,700 tractors
have been sold in Australia
in the past 12 months as
the Instant Asset Write-Off
Scheme comes to an end
Gary Northover is executive
director of the Tractor & Machinery
Association of Australia (TMA).
He can be contacted on
(03) 9813 8011 or at gary@tma.asn.au
Sales of agricultural tractors continued their strong run in
May, with an 18 per cent rise on the same month last year.
The last 12 months have now seen in excess of 15,700 tractors
sold in this country, which is 37 per cent ahead of the previous
12-month period.
The strength of the market continues to surprise many as the
challenges being experienced with supply combined with the
continuation of the extraordinary demand would suggest that
these numbers remain beyond expectations.
Many in the industry see the upcoming June/July period as
likely to see a testing time as the federal government’s Instant
Asset Write-Off Scheme comes to an end, even though it is to be
continued for a further two years in the form of the Temporary
Full Expensing program.
A major contributor to the supply challenges being experienced
has been the creation of bottlenecks in Australian ports.
We have been in discussion with the federal minister David
Littleproud on this matter and have been advised that a range of
pilot projects is to be established in conjunction with importers,
with the aim of reducing red tape and improving productivity
whilst maintaining biosecurity standards.
We will monitor these projects with interest as they unfold.
All states reported strong activity with Victoria reporting an
increase of six per cent on May last year, now sitting 32 per cent
ahead for the year to date (YTD); Queensland was up 19 per cent
to be 35 per cent up YTD and NSW was again up, 30 per cent on
the same time last year and now 78 per cent for the YTD.
Western Australian sales picked up another 13 per cent to be
48 per cent ahead for the year, sales in South Australia reported
a 34 per cent increase for the month and, finally, Tasmania
finished the month five per cent behind.
All performance reporting categories enjoyed rises again this
month with the under-40 horsepower (30kW) range up 22 per
cent for the month to be 47 per cent ahead YTD.
The 40 to 100hp (30–75kW) range was again up strongly 28
per cent in the month (50 per cent YTD), the 100 to 200hp
(75–150kW) category was up 5 per cent (29 per cent YTD).
The large 200hp (150kW) plus range had another strong rise up
21 per cent and is now 60 per cent ahead for the year.
Sales of combine harvesters are yet to get going, however
dealers continue to report a healthy level of enquiry.
Baler sales dipped again for the month but are still up 33 per
cent on an annualised basis and sales of out-front mowers
were steady and remained 33 per cent ahead of the same
time last year.
The Australian Competition and Consumer Commission (ACCC)
released its report on the agricultural machinery market this
month, which contained a number of key recommendations
concerning warranties, right to repair and use of data.
The TMA is yet to formally respond to these recommendations
but will continue to work with all stakeholders to ensure that
appropriate outcomes are achieved for the industry.
We are fortunate to have Mick Keogh, deputy chairman of the
ACCC, scheduled to speak at the upcoming TMA Conference to
be held once again this year in Melbourne at the Hyatt Essendon
Fields on Tuesday July 20, which will be a great opportunity to
further explore the findings.
PROUDLY MADE IN ITALY
INVEST IN QUALITY HAY
MAKING EQUIPMENT.
Suited to farmers and contractors, discover how Enorossi
hay making equipment could benefit your land today.
www.clarkfarmequipment.com.au
sales@clarkfarmequipment.com.au
1800 648 384
Clark Farm Equipment
clarkfarmequipment
Clark Farm Equipment
32 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 33
DOZER SPECIALISTS
Late model. Low hours. Customised to your needs.
40+
DOZERS
IN STOCK
CATERPILLAR D6T XW 2012, 5,400hrs, VPAT, New U/C, ARO
wired. Sold serviced with workshop report. S765. TA1056499.
$289,900 + GST
CATERPILLAR D3K2 XL 2018, 1,900hrs, ARO wired, sweeps,
screens and MS ripper to be fitted. S703. TA1035499.
$169,900 + GST
CATERPILLAR D3K2 XL 2016, only 780hrs, new sweeps,
screens and MS ripper to be fitted. S711. TA1035520.
$174,900 + GST
KOMATSU D65EX-17 2015, SU Sigma blade, MS ripper, Top
Con ready, very good U/C. S712. TA1035521. $269,900 + GST
CATERPILLAR D6K2 XL 2017, only 1,500hrs, ARO wired,
sweeps, screens and MS ripper. Serviced with workshop report.
S767. TA1056500. $269,900 + GST
CATERPILLAR D6T XL 2015, 4,100hrs, SU tilt, ARO, sweeps,
rear screen. Sold with MS ripper or 4 Barrel. S681. TA1031013.
$295,000 + GST
CATERPILLAR D6T XL 2011, 5,400hrs, SU blade, sweeps, rear
screen and tank guarding. S644. TA1011193. $265,900 + GST
CATERPILLAR D6T XL 2015, ONLY 4,100hrs, ARO wired, SU tilt
blade, Sweeps, Rear screen. Sold with MS ripper. S713. TA1035523.
$295,000 + GST or $310,000 + GST with 4 Barrel Ripper
CATERPILLAR D6T XL 2012, 5,000hrs, SU tilt blade, New
complete CAT U/C, MS ripper. Sold serviced with workshop
report. S751. TA1052200.
$294,900 + GST
CATERPILLAR D6K2 XL 2014, 5,200hrs, ARO wired, sweeps,
screens to be fitted. MS ripper. Excellent U/C. S724. TA1040118.
$207,900 + GST
CATERPILLAR D6T XW 2016, 5,000hrs, ARO, Tank guarding
and MS ripper. S769. TA1056501.
$329,900 + GST
CATERPILLAR D6T XL 2012, 5,500hrs, SU tilt blade, ARO,
sweeps, rear screen and 4 Barrel MS ripper. S686. TA1031015.
$285,900 + GST
CATERPILLAR D6DK2 XL 2016, only 1,700hrs, VPAT, 130HP,
sweeps, screens and 4 Barrel pitch adjust ripper. Excellent
condition throughout. S755. TA1052202.
$259,900 + GST
CATERPILLAR D6T XL 2015, 5,900hrs, ARO wired, VPAT blade,
MS ripper, Track guards, serviced with workshop report. S749.
TA1052198.
$307,900 + GST
KOMATSU D65EX-17 2012, 5,600hrs, Sigma blade, sweeps,
screens, Top Con ready, reversing camera, MS ripper. S753.
TA1052201.
$239,900 + GST
*Conditions apply.
FFM-FP-5192176-E
ABN: 32932794414
Daz Scale
mkntraks@gmail.com

INDUSTRY NEWS
fix it
Farmers wanting to hire
third-party machinery
repairers are facing
major challenges, two
government-commissioned
reports have found, with
one calling for legislative
change
Above: The Australian government’s
Productivity Commission has issued draft
recommendations to protect consumers’
right to repair their own machinery
There appears to be
particular problems in
markets for agricultural
machinery.
Australian consumers’ right to repair their own farm
machinery, among other technologies, is under fire,
according to a new report from the Australian government’s
Productivity Commission (PC).
A preliminary draft report released last month outlines the
growing number of barriers facing consumers and their right to
repair products and equipment.
The commission also issued several draft recommendations,
including calling on the Australian Competition and Consumer
Commission (ACCC) to establish benchmarks for the durability
of products, among other proposals and amendments to
current legislation.
It must be noted, the PC won’t formalise those
recommendations until the submission of the final report to
parliament in October 2021, following further consultations and
public hearings.
PC Commissioner Julie Abramson says farm equipment and
machinery accounted for a significant portion of right to repair
claims the Commission has so far considered.
“There appears to be particular problems in markets for
agricultural machinery… and we are seeking further information
on this,” says Abramson.
FARMERS BEAR THE BRUNT
In relation to agricultural machinery, the commission outlined
a growing number of barriers facing consumers, including
limited competition in repair markets for farm equipment and
issues with warranties, including them becoming void should
consumers use an unauthorised repairer.
In Australia, the right to repair refers to the consumer’s ability
to have their products repaired at a competitive price and using
a repairer of their choice.
The term is governed under several policies, including
consumer and competition law, intellectual property
protections, production design and labelling standards and
environmental and resource management.
Several inquiry participants highlighted concerns relating to
original equipment manufacturers (OEM), who are using their
position in the repairs market to impede independent repairers
from accessing parts, information and equipment.
The commission’s analysis determined that current restrictions
on third-party repairers by OEMs could be the largest cause
of harm to farmers given the ‘reasonably large’ repair and
maintenance market – the estimated value was $720 million in
2018 – and the incentives by OEMs in the market to increase
repair prices without consistent market competitiveness.
Impediments in the agricultural machinery space were
especially common in regard to tools and equipment,
where access to diagnostic software tools was outlined
as a primary barrier.
It was confirmed by the National Farmers Federation (NFF)
that most agricultural machinery OEMs do not make diagnostic
software available to anyone apart from their authorised
technicians.
As a result, the commission recommended the Australian
government re-evaluate the Repair Information Sharing Scheme,
which is designed to improved access to repair information
following three years of operation.
The draft report, however, did call for further evidence on thirdparty
repair supplies and information given the current barriers
for independent repairers were “patchy and largely anecdotal”;
and referenced the infrequently-used Part IV of the Competition
and Consumer Act 2010, which addresses anti-competitive
behaviour in repair markets.
Canegrowers Herbert River manager Frank Scardamaglia, who
was one of many to produce an initial submission for the PC’s
draft report, says farmers are becoming concerned about their
limited access to repair agents outside of dealerships.
“Manufacturers have only provided dealerships with the
appropriate software to diagnose faults or perform software
upgrades on the machine,” he says.
“This creates a lack of competition as independent repairers
are unable to access software and drives up the cost of repairs
and call outs. The hourly rate charged at dealerships for repairs
can range from $130 to $160 per hour, including travel time.
“Farmers are operating businesses with high operational
costs and machinery costs are in the top three expenses. We
would like to see a more even playing field to allow farmers
to have a broader range of repair agents available and create
competition.”
LEGISLATIVE CHANGE
The draft report also recommended that the government
amend the Competition and Consumer Regulations Act 2010
to require manufacturers to update their warranties with
further information.
Specifically, the proposed change would include text, placed
“in a prominent position”, stating that entitlements to consumer
guarantees do not require consumers to use authorised repair
services or spare parts.
In some instances, OEMs’ state warranties will become void
should consumers not use an authorised repairer; a ploy
34 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

INDUSTRY NEWS
to discourage them from using independent or third-party
repairers.
Again, participants of the review indicated concerns of
voiding warranty on farm machinery further restricted market
competitiveness within the repair market, restricting consumers
from seeking independent repairs.
Under the amendment to the law, warranties would be made
clearer, ensuring that even if consumers use independent
repairers, the legal rights of the warranty will not be voided. A
ban on voiding warranties for consumers who don’t use OEM
repairers is also being considered by the commission.
The findings of the PC’s draft report follow similar findings
made by the ACCC earlier in the year in the competition
regulator’s agricultural machinery market study, which called for
more independent competition in repair markets and changes to
warranties in the agricultural machinery space.
The ACCC’s review recommended that agricultural machinery
should be considered for future inclusion in the motor vehicle
service and repair information sharing scheme, notably in
relation to how the scheme grants access to software and
technical information.
It also recommends that agricultural machinery be included
in any broader ‘right to repair’ scheme introduced in Australia,
given future legislation could include requirements for OEMs
to grant access to software, have a sufficient supply of parts
available in Australia and provide consumers with information
about how the duration of software is supported.
“Competition in after-sales markets would be improved if
independent repairers had access to software, tools and parts
on fair and reasonable commercial terms. This is an important
issue that runs across a number of industries, both in Australia
and overseas,” says ACCC deputy chair, Mick Keogh.
However, the ACCC’s review and recommendation does
not specifically call upon the government to act or make any
legislative changes in order to compel OEMs into facilitating
consumers’ right to repair.
The Productivity Commission is set to hand down its final
report to the federal government by October 29.
Above: The ACCC says farm machinery
should be included in ‘right to repair’
schemes
Built just
down the
road.
Goldacres is an Australian owned
and operated manufacturer of
the country’s finest spray
equipment, produced in Ballarat,
Victoria.
Our sprayers are fully designed, engineered
and manufactured in Australia with over 40
years manufacturing experience along with
valuable feedback from owners and operators.
FFM-HH-5190090-CS-400
goldacres

ANNIVERSARY ISSUE
400 not out
Farms & Farm Machinery
is chalking up its 400th
edition with this month’s
issue. Andrew Hobbs looks
back at the magazine’s
history, and where we go
from here
We’ve been honoured to
have you, our readers,
along for the ride.
Since its inaugural issue in November 1988, Farms & Farm
Machinery has been dedicated to providing its readers with
up-to-date information that lived up to its name.
It was the fourth title to emerge from the Trader Group, based
in the Melbourne suburb of Elwood, and created about 10 years
after the debut of its first title, boating classifieds magazine
Trade-A-Boat.
That title was followed by Deals on Wheels – which was then
a trucks and earthmoving title – and Unique Cars, with the
company hoping that the new magazine would achieve similar
success to its previous titles.
The second edition of Farms & Farm Machinery, still in the
Are Media archives, is a 90-page newsprint title that allows an
interest glimpse into the past – and perhaps an opportunity to
mourn some missed opportunities.
Based in Moama, NSW, Mid Murray Machinery offers a John
Deere turbo header with 1,800 hours for $65,000. Eclipse Rural,
in Ballarat, offers a new Holland 8000 header with front and
trailer, and only 900 hours on the clock, for $69,500.
For tractors, Gawler Farm Machinery offers a late model John
Deere 8440 tractor for $59,000, and a Case 2390 2WD tractor
with 400 hours on the clock is offered by JJ C’Connor & Sons in
Warracknabeal for $32,500.
And, in a flashback to the days when the magazine was
as well known for its real estate ads as it was for its second
hand machinery specials, a Broiler Farm at Merricks North, on
Victoria’s Mornington Peninsula, is offered for sale for $750,000.
Not a bad deal when one considers it comprised three fully
automated sheds and a home with sea views, a tennis court,
swimming pool and in-ground trampoline.
News at the front
Set up initially solely as a classifieds title, it wasn’t until
September 1989 that Farms & Farm Machinery added some
news to the mix – a double page spread of product updates that
included news of the opening of a new showroom for Header
World at Corowa.
The showroom was the brainchild of Neil McDonald, who had
spent $1 million on sheds covering about 8,000 square metres
to provide undercover accommodation for 80 headers and their
fronts.
“Mr McDonald said header price at Header World started from
$10,000 for old machines with low hours, late model machines
typically selling for 50 to 60 per cent of their new valuation.”
Skipping forward in time, the July 1996 edition of Farms & Farm
Machinery – which retailed for $3.90 and was sold 25 years ago
this month – features four pages of news.
They included reports of an expansion to the expo site at
the Primex Field Days site in Casino, NSW, and reports that
sociologists at Charles Sturt University are examining the effect
of drought on farmers “in the wake of the worst dry spell in
Australia’s recorded history”.
In product news, the magazine praises new cabs in the Claas
mega combines, with its Accelerated Pre-Separation system,
which uses an accelerator drum ahead of the main drum to
remove most loose grain, and the debut of the Fendt Xylon 500
Series of tractors, which can hit a top speed of 50km/h.
NEW GENERATION
Farms & Farm Machinery was bursting at the seams for the new
millennium, with 230 pages and only a few pages of news –
though a glossy section in the middle shows off ads to their full
potential.
Products advertised include Dunstan Farmers’ “Mother of all
haul-out bins” – a 36-tonne model, and Gendore’s Hydra-Drive
forage wagon, which retailed for $18,600 before tax for an eight
cubic metre model with a single axle.
There was a period in the late 2000s and early 2010s that the
news moved from the front to the centre of the magazine –
extending to a princely six by July 2011 – but, today, we can
boast that news is “front and centre” of what we offer.
As we move further into the 2020s, and continue our recovery
from the COVID-19 pandemic, the team at Farms & Farm
Machinery have never been prouder to provide our readers with
the latest content about the established machines and new
technologies that will make farming easier and more efficient.
Whether you’ve been reading the magazine since the 1980s
(perhaps you bought the broiler farm) or are a more recent
member of our audience, we’ve been honoured to have you, our
readers, along for the ride.
Happy Farming.
36 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 37
APPLICATIONS FOR PUMPSETS
Aquaculture water circulating Pumpsets
Mining Dewatering Pumpsets
Agricultural Irrigation Pumpsets for Pipe &
Riser systems
Lift Pumpsets for farm channels
Recycle dam Pumpsets
River Pumpsets
Pumpsets for Irrigation Pivots & Lateral
irrigators
Transfer Pumpsets
ADVANTAGES OF A PIPE AND RISER SYSTEM
OVER AN ON FARM CHANNEL SYSTEM
No loss of water when filling Farm Channels
No more fixing leaking bayoutlets & channels
Removal of farm channels will increase crop
acreage
Easier access around your farm
Uneven ground conditions make gravity farm
channels impossible to accomplish without
major earthworks
This system will save you both time and money
WE OFFER:
Pumped Pipelines
Gravity Pipelines
Reuse Irrigation Systems
Road Crossings
Submersible Pumped Systems
Sewer Pipelines
Water mains
ADVANTAGES OF A CENTER PIVOT &
LATERAL MOVE IRRIGATOR
Precise application, both these systems can be
set to deliver a prescribe volume to match the
requirements of the crop in the ground.
Efficient water use, which prevents water runoff.
High degree of automation which can reduce
the amount of labor required.
System can operate at lower pressure that
other types of spray irrigation saving on
energy costs.
A center pivot or lateral system is applicable
to almost all crops including arable crops,
vegetables, and fruit trees.
Cuts down on water usages compared to flood
irrigation.
Less land forming, these systems can work on
rolling topography.
FFM-FP-5204815-CS-397

OPINION
dreaming of electric sheep
From Blade Runner to 2001:
A Space Odyssey, artificial
intelligence has left the
world of science fiction and
is coming to a farm near
you, though not in the way
many think
Above: We are yet to see the full potential
of AI in sheep farming, with shearing still too
complex to automate
Trevor Whittington – CEO WAFarmers
Be prepared for a
revolution in automated
machine picking.
Remember Hal from 2001: A Space Odyssey (1968)? It was
the artificial intelligence (AI) computer that went from
being a supportive crew member to attempting to take over
the space ship.
That particular sci-fi movie is credited as marking the birth
of the era of AI and with it the fear and wonder of the future
potential of computers and robots to replace humans.
Within a decade of its release, we were seeing robotics
replacing workers in strike-ridden car factories across the
western world.
Quick to pile into the search for a nicer version of Hal was
the Australian Merino industry, which was looking to swap
shearers with robots, with the first developed by the University
of Western Australia (UWA) in 1979.
Its robot ‘Shear Magic’ (see YouTube – robot sheep shearing)
clearly worked but it was never advanced enough to be
commercialised and was decommissioned in the early 1990s.
Forty years later, the industry is having another go with
Australian Wool Innovation (AWI) funding another round of AI
work looking at the component parts of sheep catching, sheep
positioning, sheep repositioning, robotic arms, automated wool
collection and delivery to the presser – all to be automated.
What gets me is why have we advanced so far in robotics and
computers in everything from manufacturing, food processing,
defence and aeronautics but the ag sector is so far behind?
Sure, we have self-driving tractors and precision farming
systems but there seems to be a large lag between
the electronic technology being developed and it being
incorporated into practical farming ag tech.
But maybe we are not alone.
The first auto pilot that could land a plane (with the assistance
of ground positioning) was developed in 1937, but it took
until 2019 to develop the radar systems and AI for aircraft
to be capable of landing without any form of ground-based
positioning assistance.
Another example is it took 30 years from 1892 for the idea of a
compression engine first designed by Rudolf Diesel to be put into
a tractor, with Francesco Cassani, the founder of the SAME tractor
business, joining the dots between tractors and diesel engines.
While robotics is seen as the next great leap forward in
productivity after the steam engine, electric motor and
combustion engine, in every instance there were long lead
times, often decades, before the real potential was seen and
practical machines developed.
So, while we are not seeing the full potential on farms of AI,
it’s probably because the next generation of cameras, distance,
force and proximity sensors and computers are only today just
good enough to do the sophisticated work UWA was attempting
back in the 1980s.
But, once the tech is good enough, the market will drive
development and take-up incredibly quickly.
If you thought the move to controlled traffic and precision
farming was fast then be prepared for a revolution in automated
machine picking and pruning across horticulture, and
automated monitoring, retrieval, soil testing and paddock work
in broadacre.
But in each case, it will be simple repetitive tasks – forget the
media fascination with robotic sheep dogs or the chance we will
fully develop robotic shearing, as the task is still too complex for
AI and real dogs and people too creative and reactive to replace.
The real potential is simple repetitive tasks using automated
drones to check for individual animals that are not moving or
accessing water, robots to pick up sheep and deliver them to
the shearer, self-driving tractors that can do more than tram
track such as return to the shed and replenish spray water.
Like robots in car factories, farm robots will be best left doing
the same thing over and over again, unlike shearers who are
dealing with a live moving animal, with all the associated animal
welfare risks.
As to why we are not seeing more AI in ag tech in use now, my
guess is because is our labour rates have been low enough to
pay humans who, if any good, can multitask, safely.
The other one is that the productivity gains of getting bigger
machinery have outweighed investing in smarter machinery.
But, as we run out of smart cheap available labour and our
machinery size is maxing out for easy road transport, the race
will be on to replace a human with automation. Hopefully they
will be more cooperative than Hal.
38 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 39

FEATURE
1
full bloom
It’s a mainstay of many
a country garden, but
lavender has become a
winning crop for growers
all around Australia –
with bunches of potential.
Lincoln Bertelli meets
some of the industry’s
leading growers
Above: Annemarie Manders works among
the lavender at Warratina Lavender Farm
All our lavender is picked
by hand with a sickle.
Floral and fragrant. Humble and hardy. Purple and popular.
The lavender plant may not immediately be front of mind
when thinking about Australia’s agricultural industry, but its
growing history in this country goes back more than a century
and it could very well be about to boom.
Last year, a partnership was signed between AgriFutures
Australia and LaTrobe University for a research project into
lavender growing and creating a detailed knowledge base
of the ideal conditions and farming methods for every stage
of the process.
Funding for this was received through AgriFutures’ Emerging
Industries Program, which identified lavender as a rural
industry capable of reaching or exceeding $10 million in
revenue by 2022.
The Australian Lavender Growers Association (TALGA) is a
partner in the project, with plans for its members to have full
access to the completed database.
TALGA is thriving, with secretary and Victorian lavender grower
Fiona Glover estimating that the association’s membership has
grown by between 10 and 15 per cent this year.
“We’ve had quite a number of new members across Australia
this year, so I can certainly say there is a big interest in growing
lavender in Australia,” she says.
“I’m not quite sure what drove it. First of all I thought [it was]
because lavender is a hardy crop and people with lots of land
are thinking of what they can grow if they don’t have much
water, which was certainly an issue last year.
“This year it’s almost like it’s a favourite because it looks nice,
smells nice, people can get oil from it, so maybe it’s not so
much the dry gardening aspect but because it’s a multi-purpose
crop.”
TALGA’s website has 32 lavender farms across Australia listed
in its directory and the association’s annual general meeting
and conference, which was held in South Australia during May,
attracted around 70 people.
Glover says this was a mix of core members, those who
had just started and “wanted to check whether they were
on the right path” and non-members interested in meeting
experienced growers before committing to planting lavender.
ORIGIN STORY
TALGA’s story begins in the 1990s but lavender growing in
Australia dates back more than a century prior to that.
Lavender has been grown in Australia since the late 19th
century, Glover explains, and one TALGA member – Bridestowe
Lavender Estate in northern Tasmania – celebrates its
centenary in 2021, albeit with a history that involves changes
of ownership and not being open continually to the public.
TALGA was the brainchild of the late Rosemary Holmes, who
had farmed lavender near Ballarat since the 1980s and noticed
increasing interest from potential growers about a decade
later.
“It was very difficult to find lavender plants to even buy to
plant,” Glover explains.
“She did open to the public and kept getting people asking
her how to grow lavender and felt there was a need for an
association.
“She set it up formally in 1995 and based it on visitor books
she had, so she rang those people and a lot of them joined.
“Many have gone, perhaps they were only hobby gardeners,
but that’s how it started and we’ve just kept going ever since.
“We are a community of lavender growers and we do
help each other; that’s the point of it, even if it’s just to sell
something.
“It works as a community organisation. You can contact
someone and ask ‘do you want this?’ so I think there are more
benefits in belonging than not belonging.
“We always get that natural attrition but it’s nice to see young
people as well, perhaps late 30s or 40s, who are keen to get
into it, make products and get out there.”
40 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FEATURE
1 2
3 4
WANDERING IN WANDIN
Less than an hour from Melbourne but feeling a world away,
Warratina Lavender Farm is an impressive destination.
Located at Wandin in Victoria’s Yarra Valley, it is the evolution of
nearly three decades’ work by Annemarie Manders, an energetic
and passionate former operating theatre nurse who admits the
farm was only ever meant to be a hobby.
“I knew nothing about soil nutrition or that you needed to do it,
how you grew your lavender, what it needed, what kind of soil, how
you would harvest it – I absolutely knew nothing but I jumped in the
deep end,” she says.
“Two years later I decided it was fantastic. I’d learned how to
drive the tractor and learned a bit about weed control – but I’m still
learning 29 years later and I decided to make this into a business.
“I had no idea about staff, running a business [or] regulations and I
can honestly say, if I knew then what I knew now, and if I had to do
then what I had to do now, I wouldn’t have started.”
However, plenty of people are thankful Manders did.
From humble beginnings, where the absence of infrastructure
meant Manders’ office was in the laundry and lavender had to be
dried wherever space could be found around the house, Warratina
now boasts a tea room and café, retail shop, private gardens and
necessary additions for a tourist business such as seating, a car
park and road signage.
Manders’ business-savvy mind has also meant Warratina does
plenty to bring people to the farm all year.
“You want people to have an experience and enjoy their time
here,” she says.
“I have a motto – give people a reason to come, give them a
reason to linger and give them a reason to come back.
“We want to give people another reason to visit the farm so, in the
winter time when the lavender isn’t flowering but we don’t want to
close, what do we do?
“We’ve got an empty drying shed, so for 20 years I have run
exhibitions in there.
“You need to have a passion, an amazing amount of energy
and you need to understand that you won’t always make a lot
of money but it’s about the experience.”
Warratina hosts a patchwork quilt exhibition that has run for
20 years, a woodworking expo with 15 years of history, private
exhibitions, markets and even an Easter egg hunt.
A mini-market in January celebrating Yarra Valley produce was
the first major event at the farm after the COVID-19 pandemic
meant Victoria went into extended lockdown last year and this
attracted about 750 people across two days.
Naturally, though, the farm truly comes to life during harvest
season.
“Our big event for the year is our lavender harvest, but we’re
just calling it the Lavender Festival and it’s at the very beginning
of the lavender season,” says Manders.
“You can’t determine exactly when the lavender is going to be
ready – one year it will be two weeks earlier and the next it will
be two weeks later.”
Normally taking place in November – and scheduled for the
third weekend of that month in 2021 – the farm is at its most
picturesque during harvest season and crowds pay an entry fee
to visit Warratina, which also includes a small tub of lavender
ice cream and a talk held in the drying shed.
ON THE TOOLS
While the vast majority of Australian farms across all
agricultural sectors are not tourist attractions like their lavender
counterparts, they do have the obvious things in common –
they use machinery and equipment and create products to
be sold.
One unique aspect of lavender farming is much of the work is
still done by hand.
Manders grows both culinary and non-culinary lavender with
two of the varieties – Munstead and Egerton Blue – being used
in food.
1. Some of the equipment used for lavender
harvesting at Warratina, including a sickle
2. Lavender is sifted through three grades of
sieves after being stripped
3. The lavender is hung to dry in the drying
shed for about two weeks
4. The earlier years at Warratina Lavender
Farm
There has been a huge
increase in interest in
culinary products.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 41

FEATURE
Above: The shop at Warratina sells a wide
variety of lavender products, both culinary
and non-culinary
Above: Located in Victoria’s Yarra Valley,
Warratina is open even when the lavender is
not being harvested
“All lavenders have a degree of natural camphor in them but
culinary lavenders have very little camphor in them, which is
toxic to your stomach, and that’s why you can use them in
food,” she explains.
“They flower first in the lavender season, which starts in
November depending on where you are located.
“In our case, we start picking the Munstead and Egerton Blue
at the end of November.
“If you were in Tasmania it would be the end of December;
they’re pretty much a whole month later.”
Climate makes a difference and, according to Glover, a
Mediterranean-style climate is best.
“At TALGA, I do get enquiries from people in Queensland where
they have got tropical weather and high humidity – lavender
does not like those conditions,” she says.
“Lavender likes a dry climate, fairly hot summer and loves
altitude, so plants really thrive better when you’re at least 300m
above sea level.
“You really need to wait two or three years to get a mature
plant and keep it looking nice if you want tourists, do some
landscaping and perhaps plant companion plants as well like
rosemary, which is a herb [and] Mediterranean climate-type like
lavender.”
While many people may have seen a lavender bush growing
and simply picked a sprig off at some point in their life, the
process of farming it for sale is much more complex than that.
Manders takes up the story.
“All our lavender is picked by hand with a sickle,” she says.
“We bring all the bunches up to the drying shed and hang them
upside down to dry. They take about two weeks to dry. After that
time and when they’re dry and you’ve got the right atmospheric
conditions, which is very little humidity, you can then strip it.
“We used to strip it by hand but now I’ve got a machine, but it
still means you need somebody to stand at the machine with a
bunch in each hand so you can do two bunches at a time.
“The brush rubs the dried lavender heads off and then they fall
through a chute into a big bin.
“When it’s all stripped we still have to sift it and we do that
through three grades of sieves – gross, medium and fine.
“The lavender falls through the first two but not the bottom one
but the flower dust does and that’s how you get your nice clean
lavender free of sticks and leaf.
“We then pack it into bags and weigh it out at 5kg a bag and
put it into a box, then we freeze it for eight to 10 days at -18
degrees C. What that does is kill any potential bugs or insects
and then we put a label on it to say it has been cold treated so it
has not been fumigated.
“A whole month after we’ve picked the Egerton Blue and the
Munstead, the other variety we grow then flowers, which is the
one you use in craft work, little bags like heat packs and sleep
pillows.
“We’ve got a month between the first harvest and the second,
which was more good luck than good management.
“We get the shed empty with the first lot – the culinary lot –
and that gives us room for the second lot and then we haven’t
got pressure on us to get the second lot stripped.”
SECRETS TO SUCCESS
The shop at Warratina Lavender Farm carries a wide range of
products, including the obvious options like dried bunches but
also many which may not immediately spring to mind, showing
the versatility of lavender.
“There has been a huge increase in interest in culinary
products,” Manders says.
“People are much more adventurous now in trying new things.
42 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FEATURE
Above: The fields at Hahndorf Lavender Estate in South Australia,
which was visited by TALGA conference attendees this year
“They love the tea, they love the honey, strawberry jam is really
popular, mustard is also popular. We also sell shampoo and
conditioner, massage oil [and] essential oil.
“There has been such a demand for the lavender that we are
barely going to have enough for ourselves to get us through
the year.
“We had huge demand for dried bunches in February with
Valentine’s Day and had to take dried bunches off our website –
we will run out of those for sure.”
While diversifying the product range helps to make more
money, both Manders – who is an active member of TALGA
and did a presentation on marketing and adapting to change
at this year’s conference – and Glover agree that opening to
agritourism will give potential lavender farmers the best chance
of success.
“Going back to that original motto – you need to have a
passion, you need to have energy,” Manders says.
“People grow lavender for different reasons – they might
just grow for essential oil, and a lot of growers are doing
that, and they don’t want to be open to the public.”
Glover believes combining product sales and tourist dollars
should be the aim for new farmers.
“Tourism is the way people come to you and spend money,
not just on your lavender but also cups of tea and coffee and
whatever else you can offer,” she says.
“It takes away from that seasonality, and if you’re clever
you can plant lavender that flowers in winter so there is still
something pretty to look at.”
Above: Bridestowe Lavender Estate in
Tasmania is a TALGA member and has a
century of history
You need to have a
passion, you need to
have energy.
Green One
GrainRite
Self Propelled Augers
are designed and built strong and tough in Australia
for Australia’s demanding conditions. Finger tip
hydraulic controls allow the operator to raise & lower
each end, ground drive, and steer.
Heavy duty barrel and frames reduces operation
vibration considerably - less vibration means less grain
damage. Reverse gear box with positive lock allows
quick and easy cleanout.
All our augers come standard with highway lighting,
oversize sign, new 10 ply tyres, aluminium mud guards,
fire extinguisher, drop spouts, cast iron pulleys, and
many more features and options.
GrainRite Augers have a 10.75” width barrel that is
2.5mm thick. GrainRite Augers are available in 35’,
50’ & 60’ lengths.
FFM-HH-5014229-TS-314-XCC
Call 03 5397 5200
or email us at info@grainrite.com.au
www.grainrite.com.au
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 43

SPONSORED CONTENT
1
2
3
options galore
The team at Victoria’s
Colac Agricultural
Company will help you find
the perfect Joskin slurry
tanker to meet your needs
1. Joskin slurry tanks range in size from
2,500 to 32,000 litres
2. The Volumetra models are made with
high-tensile steel to reduce weight
3. The Penditwist dribble bar allows for
work in windy conditions
Penditwist dribble bars
significantly reduce
nitrogen losses.
With more than 50 years of experience, Belgian ag
equipment manufacturer Joskin is one of Europe’s leading
producers of trailers and spreaders.
Since it was founded in 1968, Joskin has grown significantly,
expanding its factory operations into Poland and France, and
selling into more than 60 countries.
Colac Agricultural Company began importing Joskin in 2017,
creating a great partnership to bring the market-leading
equipment to Australia.
From the simplest model to the most technologically advanced
one available, Joskin prides itself on being able to create the
perfect slurry tanker for each one of its customers.
In 10 slurry tank models there are 1,200 options available,
allowing Joskin to manufacture your solution. They range in size
from 2,500 to 32,000 litres.
But the pride of the fleet are the large Volumetra models, with
carrying capacities from 10,500 to 28,000 litres.
Volumetra tankers have a self-supporting tubular structure
integrated into the chassis, which gives it a very low centre of
gravity. This makes them easy to manoeuvre, even with very
wide tyres.
The tank and chassis on Volumetra tankers are made of hightensile
steel to reduce the total weight of the machine.
To protect against corrosion and ensure a long life they are
also fully galvanised. This includes galvanising both the inside
and outside of the tank.
Volumetra slurry tankers come standard with hydro pneumatic
suspension in both tandem and triple axle versions. This gives
excellent stability on slopes and optimal road handling.
The suspension can be unbolted to adjust the wheelbase to
be shorter or longer and adjust weight transfer when fitting rear
equipment.
Hydro pneumatic draw bar suspension is also an option on the
Volumetra. It allows you to actively change the sloping angle of
the slurry tanker.
The Volumetra range comes with five different pump types
that can be customised to suit particular farming or contracting
operations.
When you order a Joskin slurry tanker, you can select your
running gears, braking system, tyres and axles.
You can also choose from the extensive range of precision
spreading injectors or booms – from normal spray nozzles,
dribble bar booms or tillage units that incorporate the slurry.
Boom options include the Pendislide Basic, a line spreading
boom that can measure up to 7.5m, and the Penditwist
dribble bar, which can measure up to 18m wide, with as many
as 72 outlets.
Penditwist dribble bars significantly reduce nitrogen losses
by laying the nutrient at the foot of the plant. This also
reduces the delay until safe grazing after application.
The dribble bar also keeps the tractor clean, so you can
work in windy conditions, and significantly reduces the
release of ammonia gases. It has a set of hoses that hang
from an overhead bar at regular intervals (250mm or 300mm
depending on boom width).
The macerator is essential to ensuring the Penditwist
dribble bar works properly. The 9m Penditwist boom has a
single macerator, while booms 12m and longer have two
macerators.
The macerators of the Penditwist are vertical and have
horizontal outlets, allowing optimal placement of the pipes.
As a result, the load losses are limited and slurry is more
evenly distributed.
Another option with Joskin slurry tankers is NIR technology,
which uses an infra-red lens to deliver real-time analysis of
the total nitrogen, phosphorous, potassium and ammoniacal
nitrogen in the slurry as it is spread.
Using NIR, you can spread slurry by units of nitrogen/ha, as
opposed to cubic metres/ha. The options are endless.
On top of this, Joskin manufactures a large range of muck
spreaders, tipping trailers, dump trailers, silage trailers, hay
trailers and livestock trailers.
Contact the team at Colac Ag on (03) 5231 6999, or
sales@colacag.com.au. You can find more information
at www.joskin.com.au.
44 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 45
www.elhoaustralia.com.au
IMPORTED BY COLAC AGRICULTURAL COMPANY PTY LTD, VICTORIA
Ph. 03 5231 6999 Email: sales@colacag.com.au
SIDELINER 1790 PRO WRAPPER
DC2100S FORAGE HARVESTER
V-TWIN BASKET RAKE
READY WHEN YOU ARE.
THE JOSKIN SLURRY TANK RANGE.
www.joskin.com.au
(03) 5231 6999
IMPORTED BY COLAC AGRICULTURAL COMPANY PTY LTD, VICTORIA
FFM-FP-5012885-CS-400

SPONSORED CONTENT
refresh your feed
Ireland’s own Abbey
Machinery offers single,
twin and tri auger
vertical mixers that can
handle heavy feed loads
reliably and with minimal
maintenance
Above: Abbey VF 2000 twin auger mixer
wagon
Inset: The augers have their own gearbox
to draw the feed into the centre of
the augers
With a discharge height of
800mm (higher than many
other models), the risk
of hitting the top of feed
troughs is minimised.
Feed Mixers saw a spike in interest when fodder was in short
supply in 2018-2019, as livestock growers, feedlots and
dairies looked to supplement what feed was available.
But, even though this year has been more fodder friendly,
many are finding that feed mixers continue to be an essential
part of their farming operations, producing more consistency
from what is on offer, all year round.
Abbey Machinery, imported into Australia by Farmgard, based
in Truganina, Victoria, boasts a solid lineup. This includes two
multi-spreaders, six side-delivery muck spreaders and 16
machines in its slurry tanker offering,rangin from a single axle
4,000-litre tanker to the largest 27,000-litre tri axle tanker.
When it comes to feed mixers the company has a refined
selection that offers something for everyone – in single auger,
twin auger or tri auger mixer wagons ranging from 8 to 33.5
cubic metre tub capacities.
The Abbey VF 2000 twin auger mixer wagon has a tub capacity
of 20 cubic metres and can be used to feed out an eight-tonne
load, depending on the feed mix and bulk, for dependable
performance with minimal maintenance.
Abbey machines are designed to last, with a 20mm plate
floor and 8mm walls made from Hardox steel, mounted on an
independent chassis with suspension brakes, and with a two-coat
epoxy orange paint job, makes for a robust machine that resists
the rigours of farm work.
The VF2000 runs two 15mm Hardox steel high tenacity augers
with adjustable knives, allowing for extra fodder knives to be
fitted if desired. These augers have optimal fodder kickers to
provide consistent flow to the discharge doors.
These design choices make these wagons heavier, with the
VF2000 weighing in at 7.5 tonnes, available with single or
tandem axle, with 435/60R19.5 high floatation tyres providing
options for those wanting to use the machine more in paddocks.
The VF 2000 comes with two side discharge doors, both
left-hand and right-hand, with a 560mm PVC belt elevator as
standard, mounted to the right-hand side. Longer elevators
are also available that utilise roller bearings, which are easily
accessible and replaceable as part of regular maintenance.
Rubber gussets are placed along the hinge edge of the
elevator to prevent feed spillage, and a fold-down flap offers
the versatility of helping deflect dusty feed to the elevator.
With a discharge height of 800mm (higher than many
other models), the risk of hitting the top of feed troughs is
minimised and gives added reassurance if a less experienced
operator is working the unit.
Operation of the feed door, chute and elevator is all
controlled from the tractor remote hydraulic functions, but
an in-cab electronic control box is also available, making
operation seamless at the flick of a switch. The same control
box also allows adjustment of conveyor speed.
At one metre wide, the feed out door to the elevator offers
plenty of space to ensure even feeding. The machine comes
with a feed door on either side as previously mentioned,
and at the time of purchase, the customer can choose their
preferred side for the elevator to be set up.
OPERATIONS
With large single-axle flotation tyres, the Abbey rides
smoothly to and from the feed pad, even fully loaded. The
rigid chassis provides ample base strength for the augers to
pivot off, keeping the mix constant at all times.
The tub sits on four load cells, two at the front and two rear,
which ensures even weight recording through the Digi Star
scales, with optional Bluetooth technology for those wanting
to sync the scales to their phone.
Both of the mixer’s augers have their own Comer SOM
planetary gearbox, running in sync to draw the feed into the
centre of the augers, which contributes to their consistent
fine chop and mix.
Auger speed can be changed manually via a two-speed
gearbox by means of a lever on the front of the wagon, with a
cable available as an option to enable this from the cab.
A large three-stage jack with wide footing is secure enough
to carry the weight of the wagon. It’s also equipped with a
handbrake and hydraulic brakes as standard.
Farmgard provides a complete aftermarket support service
via its national dealer network supplying parts from its
distribution centre in Melbourne.
To find out more, contact Farmgard on 1800 327 642
46 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 47
‘MIX IT UP’
WITH PRECISION.
Accurate mixing is imperative to achieve quality
results from your feed. Quality built and packed
with features, there’s plenty of reasons why you’ll
see an Abbey on a feed pad near you.
BUILT WITH SUPERIOR CONSTRUCTION AND DESIGN.
A 20mm base plate, 15mm auger and SOM planetary transmissions provide strength and product longevity.
Each model produces an excellent quality of mix for all varieties of materials.
• Digi Star electronic weighing system
• 4 weigh bars for consistent and
accurate weighing
• Independent chassis
• Heavy 3 stage jack
• PVC elevator
• 8mm hardox rolled wall
• Large adjustable counter knives
• 2 speed gearbox (twin auger model
only)
• Wide angle driveshaft
• Hydraulic brakes
• Hydraulic/electric controls of all
functions
• Side or front door discharge options
• Single or tandem axle options, both
with 435/50R19.5 wheels
• 3-year gearbox warranty
CALL FARMGARD 24 HOURS
1800 FARMGARD
FIND OUT MORE AT
farmgard.com.au
Nationwide Dealer
Service Network
35 years, Generations of
Experience

SPONSORED CONTENT
bridging the gap
Small machinery
specialist UHI Machinery
sets out to accommodate
private users and small
business owners
Left: UHI Machinery focuses on providing
tough, reliable machinery for smaller
applications
Since it emerged in Australia three years ago, United
Heavy Industries (UHI Machinery) has run on the belief
that everyone should have access to the right machinery at the
right price.
With such a wide variety of small but mighty machinery, it’s
no surprise that a lot of time and effort is put into ensuring the
equipment is built tough.
UHI Machinery offers durable machinery with robot-welded
frames and top brand engines and accessories.
The company focuses on small businesses, retirees on
acreage, the hobbyist and those who struggle to find machinery
fit for tight access jobs.
The company says it keeps prices low by selling direct
from the factory, while still offering a three-year parts
warranty and aftersales service from dealerships in Sydney,
Brisbane, Melbourne, Adelaide and Perth.
“The demand for our machinery has blown us away. In
order to keep up, we will be looking into expanding further
into Australia to cover all major cities in the next one or two
years,” says the company.
To find out more, contact the UHI Machinery sales
team on 1800 000 844.
Designed for hay, engineered to last.
Get in before June 2021 price-rise
15 Bale Accumulators Option
to add weighing scales, density
controller and/or fold up table.
Custom Trailers
10 Bale Accumulator - Built
to suit VIC customers making
longer bales. Option to add
weighing scales and density
controller
10, 15 or 20 Bale Hay Grabs - We
build regular, heavy duty, tautliner
and grabs for VIC customers with
longer bales. Option to add a
side-shift. All loader attachments
available.
Stick rakes - All loader
attachments available.
Shop on our website for
spare parts.
Shuttle Chief
3m x 2m
Includes gate
Stock Master
4m x 2.4m
Tipper with removable side boards, fold-down
gates, center gate and under-tray tool box.
Moving hay, the easy way
Farm Boss
4m x 2m
Includes removable sideboards and gates.
Option to add on side boards, removable racks, tool box, tipper, aluminum ramps, stock crates or lashing rings.
P | 02 6852 2049
www.rebelequipment.com.au
24 Blayney Street Forbes, NSW, 2871 Australia
48 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
Hay King
5m x 2x4m
Includes removable hay racks.
FFM-HH-5168768-TS-394

TradeFarmMachinery.com.au 49
BYPY TRANSMISSIONS
PTO Shafts and Gearboxes
For all your power transmission requirements
HORSEPOWER: 12 Hp TO 360 Hp - We have the best range in Australia
FULLY STOCKED WITH EVERYTHING
YOU WILL NEED FOR THE SEASON
We also stock an extensive
range of spare parts for PTO
shafts and gearboxes
Call Toll Free 1800 932 113
bypy@bypy.com.au | www.bypy.com.au
BYPY Transmissions-Australian Distributor of Bondioli & Pavesi and BIMA
FFM-HH-5190089-TS-369

PRECISION AG
Left: Food Agility chief scientist David Lamb, left, with
Food Agility CEO Richard Norton, Charles Sturt University
interim vice-chancellor John Germov, and Charles Sturt
University chief operating officer Rick Willmott at the site
of the future Global Digital Farm
hands free
Australia’s first ever ‘handsfree’
farm will be built
and developed in a bid to
demonstrate the future of
farming through robotics
and artificial intelligence
Charles Sturt University (CSU) has partnered with the Food
Agility Cooperative Research Centre to develop the Global
Digital Farm, which will be built at CSU’s 1,900-hectare AgriPark
at its Wagga Wagga campus.
The high-tech collaboration will be Australia’s first fully
automated commercial farm, which the parties hope will
develop new sustainability and carbon models to bring new
improvements to farming practices.
The parties will spend the next three years developing data
and telecommunications infrastructure, and other digital
technologies, at the AgriPark site, which currently comprises
wheat, barley and canola crops as well as a vineyard, cattle and
sheep.
Food Agility chief scientist Niall Blair says the new facility will
provide insights into a range of contemporary technologies
beneficial for farming.
“This ambitious and unique project will arm Australia’s primary
industries workforce with knowledge and technology in crucial
fields like data analytics, geospatial mapping, remote sensing,
machine learning and cyber security,” says Blair.
Food Agility chief executive Richard Norton says full automation
of farms is not a distant concept, and that the technology
produced by the GDF would help put the two bodies at the
forefront of that change.
“It won’t be too many years before technology will take farmers
out of the field and immerse them in the world of robotics,
automation and artificial intelligence,” he says.
Once built, the GDF will develop and operate technologies
such as fully autonomous machinery including robotic tractors,
harvesters, drones and surveying equipment as well as artificial
intelligence, which will make informed decisions on sowing,
dressing and harvesting.
CSU will also develop a state of the art cyber secure
environment to establish the best practice of cyber security
risks associated in modern day food production.
New sensor technology, which measure interactions between
plants, soils and animals, will also be a point of focus, while
the GDF will also analyse different carbon management and
measurement models and sustainability practices based on
evidence.
The GDF will be headed by Food Agility chief scientist,
Professor David Lamb.
The announcement of the GDF follows previous investment into
CSU’s AgriPark with the university announcing $14 million for the
first stage of capital works at the facility in April while a federal
government grant of $8 million – plus another $11.9 million from
various consortium partners – had also been invested.
avocado
toast
Currently in development
at the University of New
England, a new app has
been created to help farmers
forecast their avocado yield
with increasing accuracy
Left: The CropCount
technology is a far
more accurate tool to
predict avocado yield
new app being developed by the University of New
A England’s (UNE) Applied Agricultural Remote Sensing
Centre (AARSC) can forecast the avocado yield with up to
93 per cent accuracy.
Research conducted in 2017 by UNE indicated avocado yield
forecasting in a medium-sized orchard of 10,000 trees can be
inaccurate by as much as 120 per cent.
Instead, the CropCount app uses satellite imagery and targeted
on-ground sampling to produce the accurate forecasts in a
fraction of the time it would take growers to estimate yields using
traditional methods.
An algorithm within CropCount then identifies which trees should
be counted to provide growers with the more accurate snapshot
of health and yield across the orchard.
Funded by Hort Innovation and co-developed by creative agency
Circul8, the CropCount project is far more time efficient for growers,
AARSC director Andrew Robson says.
“It reduces the number of tree counts required from 70 to 1,000,
to just 18. With CropCount, growers take nine hours to do their yield
forecast, not the 500 hours they once did,” he says.
“With CropCount, growers record the fruit count for those 18 trees
on the app, which sends the data to us. We do the processing and
derive a yield map, fruit size map, tree disease map and a forecast
for the block [or paddock], which goes back to the grower to inform
their decision-making.
“The accuracy at the block level is better than 90 per cent. At the
farm level, it’s generally better than that.”
Robson says the app takes yield variability into consideration,
which he says is commonplace in avocado production.
Avocados suffer from irregular or alternate bearing meaning
trees which product 1,000 units one year may only produce a
handful the next.
“It is very difficult to do a generic prediction for yield forecasting,”
says Robson.
CropCount also accounts for other factors that may affect
avocado yields, including diseases such as phytophthora, tree
pruning and weather, with each season manually calibrated
individually to provide growers with the most accurate estimate.
The app was built to work effectively when offline with the ability
to sync when users were back online.
Currently, the CropCount app is in its prototype phase, with
Robson and the team at UNE hoping to complete the full version
of the app within the next six to 12 months. Its availability to the
Australian market, including avocado growing regions in Western
Australia and South Australia, remains a main priority.
The key markets of South America and South Africa, which
account for over a quarter of the global avocado production, have
also been identified as potential opportunities for the product.
Following the commercial rollout of the CropCount for avocados,
it’s understood the technology could be translated to work across
tree crops such as apples and stone fruit.
50 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 51
Hay Handling, think Muller...
SEASON
SALE OFFERS
FROM $4.5K!
ACCUMULATORS
6 TO 15 FOOT SLASHERS
MANUFACTURED IN AUSTRALIA
TO AUSTRALIAN STANDARDS
CHASER BIN
GRABS
07 3085 2987
sales@mullerfab.com.au
www.mullerfab.com.au

PRECISION AG
Left: Raven will join Case IH and New
Holland in the CNH Industrial portfolio
taking flight
CNH Industrial has added
to its portfolio with the
planned acquisition of
precision agriculture
company Raven Industries
Machinery giant CNH Industrial has announced it plans
to purchase Raven Industries, a United States-based
precision agriculture company that has products available
in Australia.
The buyout, which has an enterprise value of US$2.1 billion
(A$2.77 billion) at US$58 (A$76.64) per Raven share, is expected
to be finalised late this year and will enhance CNH Industrial’s
technological offerings.
CNH Industrial chief executive officer Scott Wine says the
purchase emphasises the company’s commitment to enhancing
its precision agriculture portfolio.
“Precision agriculture and autonomy are critical components
of our strategy to help our agricultural customers reach the next
level of productivity and to unlock the true potential of their
operations,” he says.
“Raven has been a pioneer in precision agriculture for decades,
and their deep product experience, customer-driven software
expertise and engineering acumen offer a significant boost to
our capabilities.
“The combination of Raven’s technologies and CNH Industrial’s
strong current and new product portfolio will provide our
customers with novel, connected technologies, allowing them
to be more productive and efficient.”
Brands under the CNH Industrial banner include Case IH and
Case Construction, New Holland Agriculture and Construction
and Iveco.
Raven Industries was founded in 1956 and has three business
divisions, one of which is based around precision agriculture,
while the others are an aerospace technology and highperformance
specialty films.
It was recognised earlier this year by the American Society of
Agricultural and Biological Engineers (ASABE) for its Hawkeye
2 Nozzle Control System and its VSN Visual Guidance system,
which uses a stereo vision camera and non-contact radar
sensors to navigate through emerged crops.
The company had consolidated net sales of US$348.4 million
(A$460.4 million) between February 2020 and January 2021.
spray collaboration
Trials of new spray
technologies are
underway in Europe
as Agco sets out plans
to work with leading
precision agriculture
companies to help farmers
cut their herbicide use
Above: Agco, Bosch, BASF and Raven
Industries joined Xarvio Digital Farming
Solutions in initial trials of the PoC
collaboration, currently underway in
Europe
Agco International will work with Bosch, BASF Digital
Farming and Raven Industries under a new proof of
concept (PoC) collaboration agreement, with the aim of
evaluating new spray technologies.
The PoC will focus on real-time sending technology, helping
users find ways to cut their herbicide usage while making crop
protection products more effective.
By detecting weeds in growing crops or fallow ground in realtime
and, at any time of day, the technology will produce a
precise herbicide placement, targeted specifically at
the individual plant.
Targeted spraying technology has proven to be not only an
environmentally friendly concept, but also profitable for farmers,
who, by only spraying herbicide where needed, will require less
overall volume of the product, which in turn reduces their input
costs, labour and time.
The collaboration will make use of Agco’s application equipment
expertise while Bosch will provide capabilities in hardware,
machine learning, artificial intelligence and digital services.
Xarvio Digital Farming Solutions has specialised knowledge in an
automated, real-time, in-field agronomic decision-making engine
for weed management and crop optimisation.
Raven Applied Technology, a precision spraying company, is
dedicated to sprayer efficacy that enables the precise control and
distribution of chemicals for targeted spraying applications.
With the knowledge and technologies from the collaboration,
Agco hopes to empower farmers to drive more efficiency in
their operations while also protecting the environment through a
reduction in chemical usage.
An initial trial of the PoC is already being evaluated in Europe on
a Fendt Rogator sprayer with plans to extend the concept in North
America in 2022.
Agco senior vice president and general manager – precision
ag and digital, Seth Crawford, says the advantages of employing
targeted spraying in fields is universal.
“Farmers have long been searching for innovative ways to
minimise chemical usage and reduce passes through the field to
achieve their crop protection goals,” says Crawford.
“Combined with the potential for further regulatory pressure, we
believe this collaborative spraying effort advances our farmer-first
focus and is further evidence that we will work with the best-inclass
partners to serve farmers’ needs.
“This effort is aimed at validating targeted spraying solutions,
delivering a reduction in product use to achieve the same results
as broadcast spraying in both pre- and post-emergence with the
flexibility of spraying day or night.”
52 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 53

PRECISION AG
Left: Yamaha has developed robotic
vehicles to assist with autonomous spraying
to benefit the wine industry in Australia
perfect accompaniment
Well known for its
motorcycles, quad bikes
and side-by-side vehicles,
Yamaha’s latest partnership
sees it become more high
tech
data sharing
Global manufacturer Yamaha has signed a deal with Sydneybased
startup The Yield that aims to increase the use of
robotics in agriculture.
Under an 18-month research and development partnership
with global premium wine company Treasury Wine Estates (TWE),
the companies will use robots to find new ways to improve
autonomous crop spraying and improve yield prediction in
wine grapes.
The companies will conduct their research on vineyards
in Australia and the United States owned by TWE, which is
responsible for wine brands such as Penfolds, Wolf Blass and
Lindemans.
During the 18-month R&D project, The Yield and Yamaha will
negotiate commercial arrangements to bring a joint solution for
intensive irrigated crops to international markets in early 2023.
Yamaha has already been working on robotics technology
through the creation of unmanned ground vehicles and these
will combine with The Yield’s microclimate, software, analytics
and artificial intelligence platforms during the collaboration.
Growth stage data will be gathered with the aim of improving
harvest prediction accuracy, while the robotic technology
will also be used to optimise spray effectiveness and provide
farmers with detailed data about the best times for each stage
of the process from irrigation to harvest.
The Yield managing director Ros Harvey says demand for
robotics is rising globally, particularly for intensive irrigated
crops.
“We know from customers in Australia that we can double
the effective spray windows for robots using our patented
microclimate and growth stage predictions,” she says.
“This improves robotic spray efficiency and effectiveness
whilst improving environmental performance.
“At the same time, the robots can passively collect visual
data that we can feed back into our algorithms to continually
improve them. It’s a win-win.”
TWE general manager company vineyards Greg Pearce says
the company wants to make the most of new technologies and
opportunities to adapt.
“TWE is proud of our ongoing partnership with The Yield to
improve the predictability of weather and climate, crop yield,
harvest timing and fruit grading – all critical drivers of wine
quality,” he says.
“This latest industry-leading collaboration brings together our
viticulture and winemaking expertise with world class robotics
and automation to enable us to better predict optimal harvest
opportunities and efficiently irrigate our vineyards.”
Yamaha Motor Ventures & Laboratory Silicon Valley chief
executive Jim Aota says he is excited for the partnership.
“We see this symbiotic relationship between analytics and
robotics as the future for intensive irrigated crops,” he says.
Left: The Bayer-developed Climate
FieldView can now accept data generated
by the Claas Telematics platform
Precision agricultural
data and analysis can
now be easily exchanged
across Claas and Bayer
platforms
Yield and machine operating data collected by the Claas
Telematics platform can now be transferred to Bayer’s
Climate FieldView platform through a specially-developed
application programming interface.
The interface means farmers can now analyse and gain
insights across both Class’ and Bayer’s platforms; helping them
to make better decisions in the field.
Claas Harvest Centre general manager – product, Tim
Needham, says the data can be used to generate precise
sowing or fertiliser prescriptions for the following season.
“This technology allows farmers to actively manage their
productivity, reduce risk and save time by gathering data and
conducting analysis all in one place,” he says.
“Site-specific fertiliser, crop protection and planting and sowing
strategies depend upon access to accurate information about
site-specific yield differences from the previous crop.
“In addition to yield data, the system can also document
important machine data, such as fuel consumption, to develop
a complete overview of the efficiency and profitability of farming
operations in each field,” he says.
Data logged through Claas Telematics includes GPS location,
crop yield and quantity and machine settings – all of which can
be recorded on Claas combine harvesters, forage harvesters,
large square balers, tractors and loader wagons.
Collected data is then transmitted via mobile phone network
from the machines to a server, where it then can be viewed
via the Claas Telematics website on any computer, laptop or
smartphone, where it can be exported to more common farm
management software programs.
Climate FieldView, developed by pharmaceutical and life
sciences giant Bayer, is an industry-leading digital platform
that provides data integration and analysis on farms, including
information regarding yield analysis, field health imagery, manual
seed scripts and field region reports.
Data transferred between Claas Telematics and Climate
FieldView remains property of the account owner and consent
can be revoked by the user at any time to disable the data
exchange.
54 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

ONE PERSON, ONE TRACTOR
JADAN COLLECTING &
STACKING SOLUTIONS
Jadan offers high-performance hay handling systems that are
specifically designed for the farming market in Australia. These
simple and robust machines create efficient and faster hay
handling systems that take the sweat out of handling bales.
BIG BALE STACKER
ACCUMULATOR & GRAB
1300 523 263 | www.jadan.net.au
Scan here to watch videos,
or visit www.jadan.net.au/videos
FFM-HP-5168397-TS-375
Terraland TO 6000 Swifterdisc XE 12400
• Super deep ripper! Rips down to 60cm (24 inches)
• One pass operation to super deep rip, mix clay and
incorporate lime that also packs the surface for an
excellent seed bed.
• The most economical way to transform poor to
average sandplain into highly productive country in
one pass!
• Medium to heavy country is also responding with
great results!
• Special aggressive A-discs, produce the best
stubble cutting and mixing action.
• Excellent for incorporating lime and stubble at depth
and levelling the paddock.
• Kills weeds and leaves an impressive seedbed with
the moisture locked in by the V-ring packer!
• Fixes your seeding trash flow problems in one pass!
TO AVOID DISAPPOINTMENT ORDER
NOW TO SECURE DELIVERY
Call Grant Borgward
0428 816 701
FFM-HH-5210450-TS-349

REVIEW
trans fixed
A revamp of John Deere’s
popular 6M tractor range
might have been enough,
but adding its high quality
IVT transmission system
changes the game. Harrison
Hunkin & Jaiden Drought
get a look at the John Deere
6120M tractor with IVT
It drives and operates like
no other 6M.
When John Deere revamped its popular 6M tractor range
in 2019 by adding a short wheelbase model with a sleeklooking
sloped bonnet, tractor aficionados around the world
stopped and took notice.
When John Deere then announced that it was also selling them
with its famous AutoPowr infinitely variable transmission (IVT),
interest peaked even higher… and for good reason.
We recently tested the John Deere 6120M with IVT and, while
we’ve come away impressed, we also have the question – was
it all just a fantastic John Deere marketing ploy?
SHORT BUT SHARP
Like many, it was at Agritechnica 2019 where we first glimpsed
the latest John Deere 6M family of tractors in the flesh. The short
wheelbased 6120M definitely stood out the most. John Deere
redesigned the entire cabin; a facelift that also extended to a
striking new sloped bonnet design; this new 6120M (and the
baby 6110M) looked nothing like its other 6M cousins.
It also drives and operates like no other 6M, this isn’t just
because of its short wheel-base and nimble 4.35m turning
circle, but John Deere’s surprising inclusion of its quality IVT
transmission. It grabbed our attention then and, nearly 18
months on and finally behind the wheel of 6120M, that IVT is
just as alluring now.
Our test machine was a high-spec’d 6120M courtesy of
Honeycombes in Tolga, Queensland, where we worked it on
a nearby avocado farm. Under the bonnet is a grunty fourcylinder
John Deere engine that pushes out a maximum of 133
horsepower (99kW) and 462Nm. It’s a tier 4 so you’ll have to
put up with the AdBlue, selective catalytic reduction and other
aftertreatment features that come with modern engines. For the
haters, our opinion is you’re fighting a losing battle; the most
advanced tractors will all be tier 4 or above eventually.
The 6120M’s standout features start within that cab. As
mentioned earlier, John Deere redesigned it from the ground up.
It’s spacious, well-made with high-quality plastics, the Command
56 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

REVIEW
Arm armrest is well laid out and positioned in fingers’ reach and
comes with a really crisp A-Pillar display that presents all the
machine’s technical data.
John Deere fans will feel at home inside this new 6120M as it
still has that familiar beige interior but with a few ergonomic
tweaks. Also, thanks to the display being positioned on the
A-Pillar, the cab provides the operator with some truly fantastic
visibility and the reconfigurable electronic joystick is slick.
Speaking of visibility, most of that has to do with the sleek new
bonnet design. John Deere has swapped out that distinctive 6M
bonnet for a new sloped, snub-nose bonnet. It’s a good-looking
design feature and will certainly catch some eyes. However,
the visibility it helps to create is most important. It’s fair to say
that Deere is a little late to the sloped bonnet party. The Massey
Ferguson 5S has been running a similar sloped bonnet style for
quite some time, perhaps we need to do a comparison?
Impressively, the 6120M also has front axle suspension that
makes for an extremely comfortable ride. Front axle suspension
mixed with the 6120M’s unique cabin and short wheelbase
made for a great ride in the field while we were working on
some heavy ground, as well as on the road. Strangely, the day
before we tested this 6120M we spent the day in a 1980s 4040
and that thing shook you like a bowl full of jelly… so front axle
suspension gratefully accepted.
Which leads us to the IVT transmission.
WHY IS IT IMPORTANT?
Why? Because John Deere has given the famous M series
tractor range the continuously variable transmission (CVT)
treatment. More importantly, John Deere is offering its variable
transmission (traditionally associated with high-specification) in
base-spec machines as well, providing CVT for the masses.
So, whether you’re an orchardist or a grazier, you can opt for
a no-frills tractor with a clever transmission that is perfect for
an array of applications.
We’ve been critical of Deere in the past for believing it
should receive applause for announcing ‘ground-breaking’
features that competitors have been doing well for yonks,
however, on this occasion, John Deere has almost reinvented
the wheel. You simply can’t get a John Deere tractor with a
CVT transmission unless you opt for the premium R range
of tractors – CVT has traditionally been seen as an exclusive
feature to the top of range tractor models with every single
bell and whistle on the options catalogue, so the 6120M is a
true rarity in this sector of the market.
But, how bare-bones can you actually go? By using the
John Deere tractor configurator, we worked out we could get
a 6120M with IVT with nothing more than a larger hydraulic
pump, so to answer the question is very. The website said
$160k but add a dealership handshake and we think we
could get that price down.
To be honest, the full spec 6120M we tested is almost R
money, which raises a very valid question: will adding IVT
to the M series destroy the sales of the ‘Premium” R model
line-up?
Deere is mindful of this and has limited the IVT option
to only the 6110M, the 6120M and the 6140M and is only
available in the Tier 4 models with the AdBlue, which will
keep the R series safe, so why add IVT at all?
Because it saw an opportunity. The 6120M is the
quintessential loader tractor; incredibly manoeuvrable, very
tight 4.36m turning circle and an IVT trans makes sense.
Opposite and above: The new 6120M
stands out in the market in that it comes
with CVT without the usual premium price
tag
John Deere has given the
famous M series tractor
range the continuously
variable transmission
(CVT) treatment.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 57

Get 13 issues of
FOR
JUST $
79 .99!
You’ll receive
13 issues of
Farms & Farm Machinery magazine
Weekly e-newsletter
FREE delivery to your mailbox
How?
Visit magshop.com.au/ffm
or call 136 116
Already a subscriber?
Simply call 136 116 to extend your
subscription with this offer and save
Subscribe today, it’s easy!
58 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

TradeFarmMachinery.com.au 59
1800 000 844
sales@unitedheavyindustries.com.au
We have all parts in stock and provide *3 Years Warranty Nationwide
Specialists on mini excavators, mini loaders and wheel loaders. High Quality at affordable prices
UHI XU20
Proudly Announced UHI XU20 2.0T Mini Excavator, Kubota Engine, Top brand quality, EOFY SALE!!
S10. TA1090064.
$29,900
UHI UME12
2021, NEW 1.2T Mini Excavator
with swing boom, Yanmar
Engine, 3 Years Parts Warranty.
S8. TA1090062.
$16,900
UHI UME10S
2021 UHI NEW UME10S 1.0T
Mini Excavator With Swing
Boom, free 9 Attachment. Hot
Sale $12000. S7. TA1090052.
$12,000
UHI U30
EOFY Special, 2021 Model
clearance $15900, UHI U30 Mini
Skid Loader, 400KG Loading,
23HP.
S11. TA1090065.
$15,900
UHI UWL916
EOFY SALE! 2021 UHI LG916
1.6T Loading Capacity, 56HP,
4WD, Joystick Control.
S5. TA1089880.
$23,900
UHI LG938
2021, EOFY SALE! 2021 UHI
LG938 Wheel Loader, 2.2T
loading capacity, 100HP Diesel,
4WD. Free 4in1 Bucket,
Hydraulic Quick Hitch and Fork
Attachment. S3. TA1089863.
$30,800
UHI LG940
EOFY SALE! UHI 2021 LG940
Wheel Loader, 2.5T Loading
Capacity, 114HP, 4WD.
S4. TA1089866.
$35,090
ABN: 57625611627 | United Heavy Industries Pty Ltd Trading As UHI MACHINERY
FFM-FP-5211819-A
MELBOURNE
2/94 Boundary
Road, Sunsine
West, VIC 3020
SYDNEY
1/323 Newbridge
Road, Chipping
Norton, NSW 2170
BRISBANE
122 Ashover Road,
Archerfield, QLD,
4108
ADELAIDE
27 Staite Street,
Wingfield, SA 5013
PERTH
302 Gnangara
Road, Landsdale
WA 6065

REVIEW
Words Willie McKnight
Images Justin Bennett
compact workhorse
Running both a dairy
farm and an ag business,
reliable and well-performing
machinery are key to the
Plummer family’s success.
The latest addition to their
fleet is a brand-new Kubota
M5-111 ROPS, chosen for its
compact size and versatility
Pluses
Excellent turning circle
DPF system eliminates the need for AdBlue
Great visibility
High horsepower for its weight
Basic, easy-to-operate tractor
Transmission brake for real safety stopping
on hills
Minuses
Transmission lock looks like a handbrake
On the move Hi-Lo would be useful
The compact size of the
M5-1 Series brings with
it a lot of versatility and
functionality.
Over the years, the Plummers have invested in five models
of Kubota, so clearly there’s something about the brand
that’s proving its worth to the Waikato-based business on New
Zealand’s North Island.
In fact, Dayne Plummer and his son, Richmond, have a longterm
relationship with Kubota tractors, dating back some 25
years to when they first purchased an orchard tractor for what
was then a kiwifruit farm.
With a change of focus to dairy farming and their BioStart
business (specialising in biological farming solutions), the
addition of a 103 horsepower (77kW) M5-111 is certainly not the
largest tractor in the yard, but it does, however, lend itself to a
wide variety of jobs.
Since arriving, it has been used for everything from filling in
for jobs traditionally done by the forklift and handling bales
and silage (with a shear grab), to post ramming and loading
ingredients for the Biostart business.
Set among 220 hectares of rolling to steep hills, this selfcontained
dairy farm is home to a herd of 250 cows. Also on the
property is the Patetonga MotoX and speedway track; a nod to
Dayne’s background in the sport as a stock car racer.
The BioStart business is also based here, with truckloads
of ingredients from seaweed to skim milk arriving and being
handled most days. While the business originally started in a
shed in Morrinsville in 1994, these days it offers an impressive
selection of 20 different products for soil health, biofertiliser,
crop protection, animal health and leaf health.
THE RIGHT CHOICE
With such a practical mindset, Dayne’s focus on achieving
results also came into play when choosing the brand and model
of tractor most suited to the needs of his business.
Dayne wanted a low maintenance tractor that had enough
versatility to be able to adapt its usage for both the farm and
the business. Quality and durability were also important, along
with performance.
World-renowned for its engines, Kubota has a long and
impressive history in the ag market, with models ranging from
18hp (13kW) lifestyle tractors through to the 170hp (127kW) topof-the-range
M7-2 tractor.
The new M5-1 ROPS (rollover protection system) series lends
itself to a variety of uses in farming, horticulture, viticulture and
across the lifestyle market.
Its 2.57-metre height increases its practicality and the ROPS
model means the operator can stay in touch with workers
around the tractor while operating.
For Dayne, much of the appeal lies in the tractors’ compact size
and straightforward mechanical gearbox. He was looking for a
tractor simple enough to be used on a daily basis by a variety of
operators without too many technical complexities to wrestle
with, and the Kubota M5-1 ticked all the boxes.
Like the best old-school tractors, there’s much to admire in the
simplicity of being able to get in, turn the key, select a gear and
shuttle forward. The shuttle control gives a forward and reverse
option without needing to change gear – ideal for loader work,
which makes up a significant part of this machine’s day.
Equipped with a straight six-speed gearbox, with three ranges,
this ensures simple operation with plenty of choices. Larger
Kubota models have Hi-Lo gearbox selection on the move, which
gives 36 gears to choose from, but this is unnecessary for this
operator’s workload.
ENGINE
Despite the compact size, there’s plenty of power, thanks to
103hp engine, unexpected in a tractor weighing in at 3.8 tonnes
(with loader). This level of horsepower is more traditionally found
in tractors in a much larger weight class.
The electronically-controlled engine has been redesigned
to give maximum horsepower at the lower engine speed
of 2,400rpm. The Kubota V3800 CCR Tier 4i engine has four
cylinders, 3.8 litres of displacement, turbocharging, common
rail and a diesel particulate filter (DPF). That’s more than enough
attributes to impress in this size tractor market.
No AdBlue is required, as the M5-111 boasts a DPF regen
system more commonly found in its bigger sibling tractors.
Equipping this size tractor with this technology is a first for
60 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

REVIEW
1
2
3
4
5
6
Kubota and has the added bonus of ticking plenty of boxes
when it comes to being environmentally efficient.
This regen can be done on the move for added efficiency and
is likely to need doing every 15–20 hours of operation. However,
if in an unsuitable environment, such as a hay shed or other
enclosed area, the operator can defer the notification until they
are in a safe environment. Then simply park the tractor up, push
the button and leave it to carry out the regen cycle, which can
take around 20 minutes.
The regen action works to clean the soot and ash from the DPF
by burning it off. This results in better fuel efficiency.
FEATURES
When it comes out to controls, simplicity of operation is a
stand-out feature. The adjustable steering column is framed by a
forward and reverse shuttle on the left-hand side. The large sixspeed
gearstick is at convenient operating height on the right,
along with the hand throttle, hydraulic and SCV controls, and
power take-off (PTO) operations – all the usual controls you’d
expect to find on this size tractor.
PTO speed as standard is 540 or 540E, selected mechanically at
the rear of the tractor. An optional extra kit allows for 1,000rpm.
Central display is well lit and easily visible. Speed, temperature
and gear selection are all immediately obvious, along with PTO
speed and fuel consumption. There’s nothing too complex here
to challenge even beginner operators.
New to this model is the addition of a handbrake, with a
loud alert beeper. Original models were only equipped with a
transmission lock – a useful safety feature, particularly on hills.
This still remains as part of the design.
However, in earlier models, the transmission lock (which does
resemble a handbrake) may have caused some confusion for
new operators. It’s important to note that the tractor must be
completely stationary before applying it or there’s the risk of
transmission damage.
Another attractive feature of the Kubota M5-111 is the crown
and pinion (bevel gear) steering system. This protects the
working mechanisms against wear and tear and allows for an
extremely tight turning circle; a big selling point of this tractor.
Also worth noting is the auto diff lock system. The front diff
lock is simply selected by a button next to the forward/reverse
shuttle and manual diff lock for the rear is activated by a pedal
1. Adjustable steering column provides
plenty of operator space
2. Left-hand shuttle with viewed display
3. The retrofitted joystick loader control
4. Wheel weights mounted inside rear
wheels
5. Tight turning circle on the M5-111 is a
major drawcard
6. The DPF regen system under the bonnet
The robust build quality is
in keeping with all Kubota
machines.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 61

REVIEW
6
7
8
6. A modern machine with horsepower to
spare
7. Good all-round visibility with the MX
retrofitted loader
8. The Kubota M5-111 with owner Dayne
Plummer and Kubota dealer Mark Browne
Kubota M5-111 ROPS
Engine
Cylinders
Rated revolution
Rated engine
Fuel tank capacity
Overall length
Overall width
Overall height
V3800 CCR Tier 4i
Four
2,400rpm
103hp
105L
4,045mm
2,068mm
2,570mm
Plenty of attachments and
extras are available as
added options.
by your right foot. Having a separate diff lock for the front
allows the operator the ability to still turn on hills with this
feature operating, rather than the tractor trying to sledge.
Oil flow for the hydraulics is 64 litres per minute. As
standard, the tractor comes with two service control valve
ports, with space for a third to be added.
One feature of this purchase is the fact Dayne wanted
to retrofit an existing loader from a previous tractor of a
different brand. This required the sourcing of loader brackets
for the MX loader, along with a suitable loader hydraulic
system.
Running 360/70/R24 tyres on the front and 480/70/R34 tyres
on the rear gives a low but wide stance for added stability
on hills and during its main job of loading and unloading. The
BioStart business requires a fast manoeuvrable tractor for
rapidly loading and unloading freight trucks.
While a forklift is part of the fleet, the new tractor proves
even more useful, as it can cope with different terrain other
than a sealed surface.
It’s also used for loading bales into a Kuhn mixer wagon.
While the shorter height of the machine and the retrofitted
loader has a height reach of 3.5 metres, it isn’t quite enough
reach for the top of the mixer wagon sides. This has been
easily resolved, however, by having the mixer wagon park up
against a loading bank, giving the Kubota some extra height.
Rear-wheel weights fitted to the inside of the rims on this
machine help hugely as counter weights while loading also
(rather than filling the rear tyres with water, which can vastly
reduce the life of the tyres on hard surfaces).
BUILD
The robust build quality is in keeping with all Kubota machines,
with a strong chassis for mounting the loader off as well as
supporting the engine and running gear. The stylish modernshaped
bonnet opens right up for easy and quick access to the
engine for daily running checks and servicing.
The completely flat operating platform at a low height adds
to the overall feeling of stability, plus it makes operating easy,
particularly in terms of mounting and dismounting the tractor to
open gates or unwrap a bale of silage.
Visibility from the seat is unimpeded, with the sloped
bonnet giving a full view for loader work and changing loader
implements, as the hitching points are clearly visible. The same
can be said for attaching rear-mounted implements onto the
three-point linkage. This is done with ease, with the plough arms
fitted with quick release balls and top link.
Plenty of attachments and extras are available as added options,
including a ROPS sunroof, wheel weights and the MX loader.
SUMMARY
Not all properties need a large or high horsepower tractor
and the more compact size of the M5-1 Series brings with it a
lot of versatility and functionality – important when investing
in machinery. Plus there’s the added bonus of it being fit for
purpose in terms of fitting into narrow spaces and lower heights
than larger tractors. The redesigned engine technology for
maximum horsepower at a low engine speed (2,400rpm) also
brings with it greater fuel efficiency – music to an operator’s
ears these days!
62 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

Get 13 issues of
FOR
JUST $
79 .99!
You’ll receive
13 issues of
Farms & Farm Machinery magazine
Weekly e-newsletter
FREE delivery to your mailbox
How?
Visit magshop.com.au/ffm
or call 136 116
Already a subscriber?
Simply call 136 116 to extend your
subscription with this offer and save
Subscribe today, it’s easy!

REVIEW
Words Daniel Gardner
1
looking good
With tried and tested
mechanicals and a
handsome updates exterior,
it’s okay to judge the 2021
Nissan Navara by its cover
Headspace is good but
an upright seat back and
limited legroom for taller
passengers would wear
thin on longer journeys.
With an Australian legacy that reaches back to 1985 and the
D21, Nissan’s Navara deserves recognition for its part in
building the popularity of utes to the unprecedented levels you’ll
find today. Go even further back, though, and you follow a long
bloodline of pickups all the way to the Datsun 2225 that had its
genesis in 1947.
Unlike some relative newcomers to the market, therefore, it’s
fair to say Nissan has well and truly earnt its ranking among
a growing range of compelling options. But there’s only so
far history and heritage will carry a brand in this fearsomely
competitive market and, in the eyes of pragmatic Australian
buyers, bang-for-buck is king.
That’s precisely why you won’t find the short-lived X-Class in
Mercedes showrooms for much longer. The resoundingly good
one-tonner was at the very pointy end of the premium ute
market, with a hefty price to match, and that’s before you got
stuck into the options.
Even the excellent V6 diesel flagship couldn’t convince enough
local buyers to put their hands in their pockets.
However, a little of the X-Class lives on in its mechanicallyrelated
sibling you see here, but now the Nissan Navara has
been treated to an update for 2021 and, as before, Nissan says
the mid-range ST-X will be the breadwinner of the line-up.
REFRESHED DESIGN
On the outside, a comprehensive facelift has re-sculpted the
front and rear ends, including LED lighting, a massive grille, new
wheel design and, significantly, a new bonnet.
It’s a bold new look that strides ahead of the more benign
design of its predecessor and into territory that appears inspired
by US-market tastes.
Newly designed wheels measuring 18-inches (46cm) or
17-inches (43cm) for the lower-spec variants, a new hero Forged
Copper paint colour and Navara embossed lettering in the
tailgate are aesthetic highlights.
Those with a penchant for customising and enhancing
their ride will be pleased to hear the range of original Nissan
accessories has now been extended to include favourites
such as snorkel, winch-ready roo-bar, arch-flares, underbody
protection, tow bar and LED light bars – all of which are covered
by a five-year guarantee.
Updates are less striking on the inside, where the cabin is
64 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

REVIEW
2
4
3
5
very familiar, save for the excellent, more car-like, steering
wheel that feels more sporty and ergonomic, as well as the
part-leather upholstered seats. The latter better suits shorterbodied
occupants who want to sit high and appreciate a more
commercial vehicle position.
While some unchanged switches reveal the D23 Navara’s age,
the large 8-inch (20.3cm) central touchscreen, complemented by
a generous 7-inch (17.8cm) digital display between the driver’s
dials help lift the interior for a more contemporary feel.
An off-road monitor is also now available through the central
screen and effectively repurposes the 360-degree cameras
to show various points about the vehicle when rock-hopping
around at up to 10km/h. It’s a useful feature and a clever use
of existing hardware.
THE RIDE
Practically speaking, the 2021 Navara is still a strong contender
even though it’s mechanically almost unchanged from the
previous version.
Aside from a larger-diameter rear brake drum and
strengthened rear axle, the Navara’s underpinnings carry over
include the choice of seven-speed automatic transmission or
six-speed manual bolted to a 2.3-litre four-cylinder diesel.
Only the entry-level single cab gets a single-turbo version while,
with the update, more Navara variants are now treated to the
beefier twin-turbo unit that packs 140kW and 450Nm, including
all 4x4, king-cab and dual-cab versions.
Unloaded, the Navara is lively off the line but the hardworking
diesel only comes into its own when loaded up. With a 325kg
brick dumped in the tray the Navara does not break a sweat
with excellent acceleration and manners out on rural roads.
The slightly uprated braking system offers a firm, confident
pedal with excellent progressive feel, especially when loaded.
With the load raised to include a combination of tray mass
and a trailer totalling 1.1 tonnes, the transmission and engine
combination is stoic, muscular and impressive.
If a majority of the Navara’s freight will be on board, then its
tray can accommodate more stuff with a little more space found
during the update. All versions can accommodate at least one
tonne in the back, which is an improvement on the previous
ST-X’s 930kg max.
While a new towing mode included with the three-setting
D-mode driving presets is particularly good, holding gears for
less brake-punishing descents and easier ascents, we question
the relevance of a Sport mode for a vehicle of this type.
There’s still an unpretentious amount of agricultural noise
and rigidity through the Navara’s chassis, alluding to its tough
construction but a revision of sound insulation has added a little
extra refinement to the cabin especially on faster roads.
Unfortunately, the rear-axle upgrade has not included another
retune to try to crack the unloaded coil-spring ride comfort.
While the unusual rear suspension layout does offer a degree
more unloaded smoothness than some other more utilitarian
utes, it’s still not the best, despite a few attempts by Nissan’s
chassis engineers.
Loaded, however, the tail is well-behaved and stable, matching
the Navara’s obedient and confident front end, which is
surprisingly pointy and responsive for a one-tonner. If you’re
not the most confident hauler of trailers or intend to drag things
close to the braked-trailer limit of 3,500kg, the update brings
trailer sway control.
DRIVER COMFORT
A decent amount of safety and driver-assistance kit including
autonomous braking and seven airbags across the range is
also standard, with the ST and above gaining extra features
such as lane-departure warning and assistance and blindspot
monitoring. ANCAP has awarded the Navara with the
full five stars.
While front seat comfort is reasonable, with a decent number
of comfort features, including heated seats, the Navara cabin is
on the smaller side compared with its rivals and you can feel it
in the second row.
Headspace is good but an upright seat back and limited
legroom for taller passengers would wear thin on longer
journeys. Perhaps you can distract them for a while with the
1. The Navara is still a competent and
confident all-terrain performer
2. The cabin is very familiar, apart from
the excellent, more car-like, steering
wheel
3. The large 8-inch (20.3cm) central
touchscreen is complemented by a
generous 7-inch (17.8cm) digital display
4. More Navara variants are now treated
to the beefier twin-turbo unit that
packs 140kW and 450Nm, including all
4x4, king-cab and dual-cab versions
5. All versions can accommodate at least
one tonne in the back
A little of the X-Class lives
on in its mechanicallyrelated
sibling you
see here.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 65

REVIEW
Above: Off-road ability is limited by
relatively short suspension travel and
ground clearance when tackling the
toughest stuff
Nissan’s storied ute
offers a compelling
package and looks set to
feature prominently in an
Australian landscape for
many years to come.
unique electric central rear window or to chat with a kelpie in
the tub?
Unfortunately, our first (or should that be second) encounter
with the updated D23 Navara didn’t include any time away from
the open road and, while a blast out of the city with a loaded
tray and trailer in tow represented one likely scenario for the
model, a significant chunk of its owners will be wanting to tackle
some more challenging terrain.
The good news is that there’s nothing about the update
that should detrimentally impact its off-road prowess. In
previous testing and comparisons, the Navara has not proven
itself as class-leading, but it is still a competent and confident
all-terrain performer.
Headlining its list of go-anywhere credentials is a rear locking
differential, which does not disengage front traction control
when activated. But off-road ability is limited by relatively short
suspension travel and ground clearance when tackling the
toughest stuff. That said, we’re looking forward to an excuse
to get back behind the wheel of the Navara and take into the
bush, looking for answers as well as the trail less travelled.
VERDICT
With a growing number of bargain-basement newcomer
dual-cabs challenging the established longstanding models,
the Navara cannot afford to falter or miss an opportunity to
evolve and improve.
But capping off the Navara’s rich assortment of
equipment, trail and worksite-ready mechanicals and a
handsome exterior lift, is attractive range-wide driveaway
pricing. Kicking off from $47,990 for the SL dual cab or
$57,290 for the generously equipped ST-X equivalent,
Nissan’s storied ute offers a compelling package and looks
set to feature prominently in an Australian landscape for
many years to come.
66 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

We
everywhere
Are Media publishes across six key platforms to maximise audience reach, engagement and response.
For more information, visit industry.aremedia.com.au

68 TradeFarmMachinery.com.au
VELDONAS
Specialising in industrial motors and pumps
WE BUILD DIESEL HYDRAULIC PUMP SETS TO ORDER
ASK ABOUT OUR OIL AND TEMPERATURE AND TIMER WATCHDOGS
ROVATTI CHOPPER
Open pump impeller, chopper device, stainless steel plates, heavy duty jockey jacks,
hand primer on effluent pumps, pto shaft, heavy duty frame.
STVEL54441. TA10770.
$6,599
TRUCK MOUNTED 12" TRANSFER PUMP SET TRANSFER PUMP
Truck mounted 12" Transfer pump set.
Ask about other specialised applications.
S13. TA11062.
POA
AIR CLEANERS
HEAVY DUTY
From 10hp to to
200 hp.
VEL 14307. TA10926.
Prices starting from
$130
TACHOMETERS FOR DIESEL ENGINES
Tiny tach for diesel engines gives a digital RPM reading
regardless of the number of cylinders. A transducer takes a
pulse reading from the injector line Simply bolt the
transducer to the injector line, supply a 12-24V DC supply
and away you go! It even has a built-in hour meter, service
function and max rpm range. S22. DPLIn27532.
$264
INDUSTRIAL
RADIATORS
20 hp $275
40 hp $360
60 hp $585
120 hp $820
S11. DPLIn27501.
From $275
JAPANESE DIESELS
Parts available for small
Japanese diesels.
AW54939-FM077-060-07.
DPLIn27496.
POA
BLADES
To fit small Japanese
tractors.
From $8.80 each inc GST.
AW54939-FM077-060-08.
DPLIn27497.
$9
PERKINS GENERATORS
6,8,10,13,15,20 and 30 KVA
generators, single and 3-phase,
powered by water-cooled
Perkins heavy duty diesel
engines, key or remote start,
fuel tank base, full engine
protection, 500 hours service
intervals Ideal backup or prime
power Call for your special
price!!!. AW54939-ST190912.
DPLIn27583.
POA
ENGINE WATCHDOG TM6
ENGINE SHUTDOWN SYSTEM
& TIMER
TM6 Oil/Temp Watchdog with
wiring diagram $240 + GST
TMT Oil/Temp Watchdog with
shutdown timer & wiring
diagram $460 + GST
Solenoids and rack pullers are
extra. S37. TA750757.
$240 + GST / $460 + GST
PLUTTO PUMP PRIMER
Turn your centrifugal
pump into a self-priming
pump With the new easy
to install Plutto exhaust
primer throw away your
bucket and hand priming
pump The Plutto exhaust
primer automatically
primes up your pump
when you sart the engine
Priming kit. S18. DPLIn27578.
$490
SECOND HAND
YANMAR DIESEL 6 X SELF
PRIMING PUMP
With 25 hp Yanmar diesel.
S12. DPLIn27519.
$6,310 + GST
IRRIGATION HOSE HOSE
Suction and delivery hose
Call for your special price!.
AW54939-FM077-043-01.
DPLIn27516.
POA
ISUZU • MITSUBISHI • KUBOTA • YANMAR
Agent for TUTTS • TATHONG • KUBOTA • ENGINES • GODWIN PUMPS
www.veldonas.com

TradeFarmMachinery.com.au 69
www.veldonas.com
Specialising in industrial motors and pumps
BUILT TO YOUR REQUIREMENTS
PUMP SETS BUILT TO YOUR REQUIREMENTS NEW OR USED
ALS0 IN STOCK
LOW PRESSURE PUMPS
*New 4” self-priming pump with S/H Kubota 12 hp diesel,
100,000 lt/hr to 15mt head ................................. $4,890 inc GST
*65 bpz bare shaft, 55 mt head ...............................................$380
*80 bpz bare shaft, 65 mt head ...............................................$560
BUDGET DIESEL ENGINES
All engines are low hours, fan-flywheel, 3 months limited warranty
*Kubota Z600, 12hp, 2 cylinder ............................................$1,710
*Kubota D600, 15hp, 3 cylinder ...........................................$1,683
*Kubota D850, 18hp, 3 cylinder ...........................................$2,040
*Kubota D950, 20hp, 3 cylinder ...........................................$2,233
*Kubota V1200, 28hp, 4 cylinder ..........................................$2,562
*Kubota V1405, 30hp, 4 cylinder ..........................................$2,750
*Isuzu 3AF1, 22hp, 3 cylinder ..............................................$2,057
*Isuzu 3AE1, 30hp, 3 cylinder ..............................................$2,376
*Isuzu 3AD1, 34hp, 3 cylinder ..............................................$2,557
*Yanmar 2HS66, 11hp, 2 cylinder ........................................$1,155
*Yanmar 2HS80, 19hp, 2 cylinder ........................................$1,765
*Yanmar 3TNA86, 15hp, 3 cylinder ......................................$1,770
*Yanmar 3TNA68, 16hp, 3 cylinder ......................................$1,870
*Yanmar 3TNA72, 20hp, 3 cylinder ......................................$2,035
*Yanmar 3TNA75, 23hp, 3 cylinder ......................................$2,075
*Yanmar 3TNA82, 25hp, 3 cylinder ......................................$2,629
*Mitsubishi CA700, 15hp ......................................................$2,075
*Mitsubishi K3D, 21hp, 3 cylinder ........................................$1,980
WE ALSO BUILD POWER PACKS INCLUDING RADIATOR,
MUFFLER, STUB SHAFT, IGNITION, FILTERS, BASE FRAMES.
GENSETS
ASK ABOUT OUR NEW FG WILSON GENSETS FROM 10 KVA
to 400KVA
ENGINES
*Large range of new and secondhanddiesel
engines, 8hp to 100hp, 3 months warranty .......From $1,500 inc GST
TRANSPORT ARRANGED AUSTRALIA WIDE
IRRIGATION FITTINGS AND HOSES
TO SUIT YOUR PUMPING
REQUIREMENTS
DIESEL POWER PACKS SELF-PRIMING PUMPS SOUTHERN CROSS PUMPS GENERATORS
• BENDS
• TAPERS
• TEES
• FOOT VALVES
• CHECK VALVES
Ask for a quote
SECOND HAND
KUBOTA Z600
2 cylinder diesel
power pack
Electric start.
PM045-072-02.
DPLIn27529.
$1,925
SELF PRIMING 4 PUMP
4 self priming, belt drive.
AW54939-FM077-043-02.
DPLIn27541.
$654
SOUTHERN
CROSS 4X3
With S/H Kubota
Z620, 13 hp 2
cylinder diesel, 20
litre/second at 20
metre head
Economical
transfer pump
$4,970 inc GST.
Kubota. DPLIn27528.
$4,970
PTO
GENERATOR
50KVA - Three
Phase - 3 point
linkage with heavy
duty jack stands.
VEL4156. TA10931.
$8,710
SECOND HAND
ISUZU POWER
PACKS
3 cylinder diesel,
22-40 hp.
From $3,080.
ST159827.
DPLIn27579.
$3,080
ISUZU DIESEL 6 X SELF
PRIMING PUMP
with secondhand 25 hp.
AW54939-FM077-051-09.
DPLIn27515.
$6,310 + GST
SECOND HAND
SOUTHERN CROSS
80X50-315
Isuzu 3AE1, 30 hp diesel,
15 litres per second at 80
metre head.
AW54939-FM077-112-02.
DPLIn27518.
$7,850 + GST
MITSUBISHI
DIESEL
GENERATOR SET
8 KVA
15 hp, S/H 3
cylinder
Mitsubishi electric
start Engine
watchdog, fuel
tank. S16.
DPLIn27548.
$5,850 + GST
SECOND HAND
NISSAN QD32
Diesel, 64 hp, 4
cylinder, all new
fittings, includes
outrigger bearing
A real workhorse.
S21. DPLIn27523.
$5,780 + GST
UP TO 36"
MINING PUMPS
PUMP
VXTE48791.
TA206423.
$14,510
SECOND HAND
SOUTHERN
CROSS
80X50X250
Nissan TD27,
48hp diesel, 20
litres per second
at 80 metre head
Engine shutdown
included. S23.
DPLIn27505.
$8,270
12" 300 IS
TRAILER
MOUNTED PUMP
SET
new pump direct
drive coupled to
second hand 6cyl
Nissan diesel with
new tandem trailer
with Vin. S33.
TA750753.
$18,810 + GST
KUBOTA V1200
With 28 hp, 4
cylinder diesel
power pack New
radiator, muffler,
hoses, filters,
35mm keyed
shaft.
PM045-072-03.
DPLIn27547.
$3,985
SECOND HAND
ISEKI 10" PUMP
New. 3 cylinder,
40 hp Isuzu diesel.
27480. DPLIn27480.
$7,990 + GST
VARIOUS
ELECTRIC
PUMPS SINGLE +
3 PHASE
elecpu9582.
TA206433.
$4,260 4260
CUMMINS 66
KVA
6 cylinder diesel
generator. S19.
DPLIn27568.
$13,387
SECOND HAND
KUBOTA
SOUTHERN
CROSS HELICAL
PUMP
Kubota - Southern
Cross Helical
Rotor pump.
From $4,950.
Vel SSS420.
TA226460.
$5,850 + GST
PONTOON PUMP
ELECTRIC
Pontoon with
electric pump.
xzdef19652.
TA206427.
$14,910
SOUTHERN
CROSS
100X65-315
PUMP SET
with Nissan QD32
(65hp), skid fuel
tank, oil-temp,
hi/lo timer
watchdog and
fork lift roof.
Vel67912. TA11060.
$13,750
PISTON PUMP
XF404
With DEK 4.7 hp
diesel, 4,000 litres
per hour 60 metre
head. S24.
DPLIn27531.
$3,300
9 Wright Street, Sunshine Victoria 3020 | sales@veldonas.com.au
Phone 03 9312 0888 • Fax 03 9312 0999 • Mob 0417 709 200
FFM-DPS-5011411-E

MISSED OUT
ON SEASON 2?
CATCH UP NOW ONLINE!

Seasons
1 & 2 now
available
online
10play.com.au/
mighty-machines

72 TradeFarmMachinery.com.au
ALL MAJOR
BRANDS
ALLDIESELS
WARRANTY
Australia's trusted partner for new and used diesel engines,
quality spare parts & rebuilds
CUMMINS
CATERPILLAR
SCANIA
NTC 300 Big Cam $12,100 C7 New $26,950 DSC/DS9 Various
$CALL
N TC 400 Rebuild $24,000 C9 Various
$CALL DC9 5cyl Low Kms $19,800
NTC 350 Ex Fire Truck $13,750 C12 Good Runners from $14,850 DS11 360 & 380hp $13,750
NTC 400 Ex Fire Truck $15,950 C12 Low Km $17,050 DSC12 420hp Electronic Low Ks $CALL
NTC 444 $14,500 C12 Industrial $15,950 DT12 470hp & 480 EGR
$CALL
NTC400 Small Cam $9,350 C12 Rebuilt
$CALL DS14 4 Series
$CALL
N14 Various from $11,000 C13 Industrial
$CALL DS16.0 580hp Low Kms $22,000
N14 Mechanical $13,750 C15 Rebuilt
$CALL
N14 525HP Celect Plus Rebuilt $27,500 3116 Industrial & Auto $CALL
IVECO
N14 Celect Ex Fire Truck $13,750 3126 330hp $11,000
N14 Celect Plus Low Miles $16,500 3176 with jakes $CALL
9 Speed Transmission As new $3,850
NH250 Ex Us Army as New $9,350 3196 Industrial $CALL
Tector 6 Suit Eurocargo Euro 4 & 5 from
L10 330HP rebuild
$CALL 3208 From $9,350
$14,850
M11 Low miles from $11,000 3208 Rebuilt $CALL
Tector 6 Rebuild $18,150
M11 Mechanical Industrial $CALL 3208T Ex Government $11,000
Cursor 8 310-360hp Euro 4 & 5 from $13,750
ISM 11 Low km from $12,100 3208 Turbo Rebuilt $CALL
Cursor 10 380-450hp Euro 4 & 5 from $15,400
Curso 13 400-560hp Euro 4 & 5 from $18,150
ISM 420hp low kms $14,850 3306PC Industrial Running $5,000
6CT 210hp 800hrs $14,300 3306DI Various
$CALL
6CTA 250hp $11,000 3406B Strong motors $14,850
MERCEDES
6CTAA 275hp - Low Kms $11,000 3406B Powerpack
$CALL OM364A $6,050
6CTAA 300hp $13,750 3406B After cooled $14,850 OM407 Bus Specs $3,850
6CTAA 300 Rebuilt
$CALL 3406C Industrial spec $15,950 OM422 V8 250hp $9,350
6BT 160hp various specs $8,800 3406C Truck spec $15,950 OM447 Bus $11,000
6BT New 160hp construction $15,950 3406E Dyno from $14,500 OM447 Turbo $13,750
6BTA 180 hp $9,350 3066 New - Last one $18,700 M904LA Bus
$CALL
6BTAA 210hp -Low kms $10,450 3054 Low Hours $8,250 OM902LA adblue $14,000
ISB 5.9 Industrial $9,350
OM906LA From $11,000
ISB 5.9 24 Valve VP44 $8,250
OM926LA From $13,750
ISC Low Klms from $14,850
OM457 Bus $17,050
ISC Rebuilt
$CALL
OM460 Freightliner from $13,750
ISL Good Tested From $15,950
ATEGO 6 V. Low Km from $11,000
ISL 400hp Rebuilt
$CALL
ISX 500hp Rebuilt
$CALL
VOLVO
QSM11 Rebuilt
PERKINS
$CALL
6.354 Naturally Aspirated $6,600
4.108 Rebuilt $5,500
4 Cyl Various $CALL
4.236 Suit Rebuild $1,100
3054 Low hours $8,25
DAF
PACCAR 4 CYL $8,250
PACCAR 6 CYL from $8,500
PACCAR 6.7 CYL NEW $18,150
430hp Mechanical $13,750
280hp Electronic $16,500
430hp Electronic Ex 85CF $17,600
430hp Electronic Ex 95 XF $17,600
480hp Electronic $17,600
530hp Electronic $19,800
AUTOMATICS
World MD 3060/3560 $4,400
World MD 3060PR/3560 From $3,850
PR PTO with retarder New $8,250
World HD 4560P PTO Spec $11,000
2000 Series $4,400
B400 Bus Spec $6,000
B400R Retarder Spec $7,150
B500R Retarder Spec $11,000
AT545 Low Kms $2,200
MT643 Low kms $3,300
MT653 Low kms $3,300
MTB653 with Retarders $6,050
MT654 As New $6,050
HT740 Ex US Army $8,250
HT754 low Hours $9,350
HT754 With Retarder $11,000
HT750 DRD low Km $9,750
Various adaptors available
ALLIS CHALMERS
Allis Chalmers New T3500 $7,500
2800 $4000
CASE
Case/Cummins Equivilent
$CALL
DETROIT
6V53 Dyno Run As New $9,350
4.71 Low Hrs $7,700
4.71 Turbo Low Hrs $7,150
6.71 Inline $7,050
6V71 Truck and industrial
$CALL
8V71 Low Miles $9,350
8V71 Turbo
$CALL
12V71 Twin Turbo
$CALL
6V92TA from $10,450
6V92TA In-chassis Rebuild $15,950
8V92 DDEC 2 Ex F/Truck $13,750
8V92TA Industrial as New $18,500
8V92TA Silver near New $13,750
8V92TA Electronic Low Miles $13,750
Series 60 DDEC 2
$CALL
Series 60 12.7 500hp $13,750
Series 60 14.0
$CALL
DD15
MAN
$19,250
DO824 Low Km $7,150
DO826 Low Km $9,350
DO836 Electronic from $9,900
DO836 Common Rail $16,500
D2866 $13,750
D287 $13,750
D2676 Common Rail $22,00
DEUTZ
F3L912 $6,600
F4L912 Suit Rebuild $3,300
F5L912 Suit Rebuild $3,300
F6L413F
$CALL
ONAN
Onan 9hp Rebuilt $2,750
TD61F $8,500
TD63 $9,350
D6A Low Km $9,350
D6B $10,450
TD71 Low Km $9,350
TD73 Low Km $9,350
D7A Mechanical $9,350
D7B Mechanical $10,450
D7C Electric Gov. Low Km $13,750
D7C Rebuild suit FM7 $17,600
D7E suit FE Euro 4 & 5 $14,850
D12A suit FH12 $14,400
D12D 420hp Low km $18,700
D12D 460hp $19,800
D12D 500hp
$CALL
D9A Suit FM Euro 4 $19,800
D9B Suit FM Euro 5 $19,800
D11C Suit FM Euro 5 $19,250
D13A Suit FH/FM $22,000
D13C Suit FH/FM Euro 5 $23,100
D13K Suit FH/FM Euro 6 very low miles
$44,000
MACK
E6-350 Two Valve $11,0000
E7-350 Mechanical $14,950
E7-427 V-Mac $16,000
E7-454 V-Mac $16,225
E7 4 Valve V-Mac $16,225
STEER DRIVE AXLES
Assorted Axles
$CALL
NEW STOCK
ARRIVING
NEW, REBUILT AND USED MOTORS. HUNDREDS OF ENGINES WRECKED FOR SPARES
SPECIALISING IN AMERICAN AND EUROPEAN DIESELS
Cant find what you are looking for? Give us a call
PRICES
NEW STOCK ARRIVING DAILY.
www.alldiesels.com | info@alldiesels.com
INCLUDE GST
Head office: 18 Jade drive Molendinar, Gold Coast QLD 4221
call 07 5597 0077 or text 0419 515 551
POWERPACKS
We have a huge range of industrial powerpacks in stock for immediate
dispatch, ranging from 80hp all the way up to 1,500 hp.
CATERPILLAR
CUMMINS
3516 1,500hp 400 hours $275,000
3054 85hp low hours $7,700
3056 aftercooled 180hp $17,600
3126 200hp $19,250
C6.6 200hp 600 hours $19,800
C7 300hp $27,500
C9 335hp $20,000
C11 400hp $25,000
C13 440hp 800 hours $45,000
C15 550hp $30,800
C15 540hp 1500hours $45,000
3306 DI 300hp $19,800
3406C 460hp $27,500
3406E 660hp $27,500
JOHN DEERE
6081HF070 250hp $19,800
4329D Turbo $8,500
4BTA on trailor v. low hrs $11,000
6BTA 160hp $14,500
6CTA 250 hp $15,400
ISB 260hp low hrs $18,375
QSC 300hp $24,200
QSL rebuilt
$CALL
N14 Mechanical 475hp $27,500
QSX15 rebuilt
$CALL
DETROIT
Detroit 8V71 Turbo $16,500
Detroit 12V71TT
$CALL
PERKINS
1104 Turbo $7,700
1106 180hp $14,500
CUMMINS N14 MECHANICAL 475HP
AIR COMPRESSORS
Sullivan Palatek 900CFM only 3,800hrs. $49,500
Sullair 900XHH/1150XH 1,150CFM 1,700hrs $88,000
BLADDER TANKS
New 3,000 Gal. Trailable, complete with
tiedowns. Suit potable water $5,500
New 5000 Gal Trailerable $5,500
LISTER
SR3 19.5 hp $3,300
LPW4 Power Pack 40hp $4,235
INTERNATIONAL
DT466 from $8,250
DT466 Ex Firetruck $9,350
530E Electronic Low Kms $10,500
TRANSFER CASES
Kaiser $3,850
Rockwell From $2,500
FFM-FP-5013171-CS-398

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA
Wrights Tractor Sales & Service & Wrecking
Chalkhill Road, McLaren Vale S.A. 5171
STOCKIST & DISTRIBUTOR FOR SA.
Sales (08) 8323 8795 Wrecking (08) 8323 8745 Office (08) 8323 8705
Fax: (08) 8323 9165, Mobile: 0419 820 318
Email: wrightstractors@bigpond.com
IN BUSINESS FOR MORE
THAN 35 YEARS SELLING
AUSTRALIA WIDE
www.wrightstractors.com.au
FOR FULL LISTING OF TRACTORS & MACHINERY, NEW PARTS & ACCESSORIES
CONNOR SHEA 18 ROW DISC SUPER SEEDER (TRAILING) with rear bag loading
platform, exceptional condition, no rust in boxes, ready to go. * PRICE INCLUDES
GST. John - 08 8323 8795, Richard - 0419 820318, wrightstractors@bigpond.com.
6948. TA1085303. $17,950 INCL GST
JOHN DEERE 3320 TRACTOR (FITTING FRONT END LOADER) year approx 2013. 4
wheel drive, 4 cylinder diesel, serial no: 1LV3320HCBH7406, 3 point linkage,
airconditioning, enclosed cab, ROPS, approximately 3,427 hours indicated/33
horsepower * PRICE INCLUDES GST. Phone John 08 8323 8795, Richard - 0419
820318, wrightstractors@bigpond.com. 6755. TA1037953. $37,850 INCL GST
NEW HOLLAND MC28 FRONT MOUNT MOWER 4 WHEEL DRIVE 3 cylinder diesel,
serial no: TE20329, engine no: J843-87335, approximately 932 hours indicated,
hydrostatic transmission, 1900mm slashing deck, PTO, pneumatic tyres, ROPS, ex
council. 6828. TA1048646.
$14,950 INCL GST
CASE IH JX70U TRACTOR WRIGHTS TRACTORS PHONE 08 8323 8795 4 wheel
drive, powered by Iveco 4 cylinder diesel engine, air conditioning, enclosed cab,
tow bar, 3 point linkage, power take off, AUX hydraulics, 4 speed high/low, approx.
74hp, immaculate condition, approximately 6,159 hours indicated, width 1900 at
tyres, 2040 at guards, Front End Loader fitted * price includes gst. Phone John - 08
8323 8795. Richard - 0419 820318. 6337. TA847556. $36,450 INCL GST
NEW HOLLAND T4050 TRACTOR 4 wheel drive, year approximately 2013, air con
cab, 1 owner, tyres 75% all round, 97 horsepower approximately, excellent
condition throughout. 6838. TA1050651.
$31,000 INCL GST
HOWARD CONDOR PLM 350 WINGED FOLDING MOWER GALVANISED * PRICE
INCLUDES GST. John - 08 8323 8795, Richard - 0419 820318,
wrightstractors@bigpond.com. 6949. TA1086715.
$19,000 INCL GST
DITCH WITCH 8020 CHAIN TRENCHER 4 cylinder diesel, serial no: 5J0190,
approximately 1,500 hours showing, fitted with back fill blade, auxillary hydraulics,
counter weights, open cabin, pneumatic tyres, ROPS, 80 horsepower
approximately, John Deere motor, 4 wheel steer, front cable reel holder, ready to
work. 6727. TA1017219.
$34,500 INCL GST
CASE CX 90 TRACTOR 4 wheel drive, air conditioned cab, just fitted Front End
Loader, 3 point linkage, new front tyres, rear tyres 75 - 80%, new front forks, PTO,
92 horsepower approximately. John - 08 8323 8795, Richard - 0419 820318,
wrightstractors@bigpond.com. 6951. TA1087906.
$43,450 INCL GST
JOHN DEERE 5525 TRACTOR year approx. 2010, 4 wheel drive, serial no:
LV5525R453794, engine no: PE4045T716512, approximately 5,400 hours
indicated, ex Council, enclosed cab, 12 x 11 power/reverser transmission, 2 rear
remotes, 4 cylinder diesel, 540 & 540E PTO, Ag tyres all round, rotating beacon,
approximately 91 horsepower. John - 08 8323 8795, Richard - 0419 820318,
wrightstractors@bigpond.com. 6758. TA1038825.
$39,500 INCL GST
NEW HOLLAND 57 ROLABAR HAY RAKE no wear on all knuckles, has done very
little work. 28. TA1086701.
$4,950 INCL GST
SEVERAL OF, VARIOUS SIZES
HOWARD EHD 7' SLASHER extra heavy duty, twin depth wheels, galvanised, 3
point linkage, excellent condition, ready to go. (2 OF) $7,950 EACH. Price includes
gst. 6645. TA982110.
$7,950 INC GST
JOHN DEERE 5300 TRACTOR WRIGHTS TRACTORS PHONE 08 8323 8795 4 wheel
drive, fitted front end loader, ROPS frame, roof, tyres as new, 3 point linkage,
approximately 50 horsepower. 6579. TA932038.
$32,450 INCL GST
JOHN DEERE 5065M TRACTOR 2011, 4 wheel drive, diesel, serial no:
1LV5065MPBJ3472255, engine no: 347255, approximately 4,493 hours indicated, 3
point linkage, air conditioning, enclosed cab, radio/cd, radio UHF/VHF, ROPS,
approximately 65 horsepower. 6754. TA1037949.
$44,000 INCL GST
IMANTS ROTOK.R6.MD.R17 ROTOKNIFE Lawn aerator *price includes gst. 6630.
TA964931.
$9,850 INCL GST
FIAT CRAWLER TRACTOR 605C 4 cylinder diesel, 3 point linkage, 65 horsepower
approximately, tracks good bushes turned, roll frame & roof, remote hydraulics,
nudge bar, gears 6 forward & 2 reverse, approximately 2,400 hours indicated.
6910. TA1076658. $27,000 INCL GST
ALSO IN STOCK 3PL 3 TYNE
HORWOOD BAGSHAW BLADE PLOUGH trailing, with culter, hydraulic ram & stand,
good order * PRICE INCLUDES GST. John 08 8323 8795, Richard 0419 820 318,
wrightstractors@bigpond.com. 6878. TA1059436.
$5,800 INCL GST
MASSEY FERGUSON 165 TRACTOR FRONT END LOADER 2 wheel drive, multipower
& working, power steering, hydraulics, 3 point linkage needs looking at,
mechanically good, 212 Perkins motor. $6,700 AS TRADED. John - 08 8323 8795,
Richard - 0419 820318, wrightstractors@bigpond.com. 6959. TA1090884.
$6,700 INCL GST
2 OF
MASSEY FERGUSON 135 TRACTOR 2 wheel drive, approximately 6,400 hours
indicated, roll frame & roof, 45 horsepower approximately * price includes gst.
6724. TA1015626. $10,450 INCL GST
CONNOR SHEA 10 ROW SUPER SEEDER 3 POINT LINKAGE super & seed, 3 point
linkage, steel wheels, serviced & ready to go. * PRICE INCLUDES GST.
John - 08 8323 8795, Richard - 0419 820318, wrightstractors@bigpond.com.
6929. TA1078632. $11,850 INCL GST
SHIBAURA SE7300 TURBO TRACTOR 2 wheel drive, front end loader & forks,
approximately 3,200 hours indicated, power steering, 73 horsepower
approximately, as traded * PRICE INCLUDES GST. Phone John 08 83238795,
Richard - 0419 820318. 6837. TA1049634.
$9,900 INCL GST
ANTONIO CARRARO TRX99A TRACTOR 4 wheel drive, vin: 9435650453, year
approx. 2001, 3 point linkage, 80 horsepower approximately * PRICE INCLUDES
GST. John - 08 8323 8795, Richard - 0419 820318, wrightstractors@bigpond.com.
6941. TA1084328. $32,450 INCL GST
KUBOTA B7200 TRACTOR 4 wheel drive, 21 horsepower approximately, 1,024
approx. hours indicated. * PRICE INCLUDES GST. John - 08 8323 8795, Richard -
0419 820318, wrightstractors@bigpond.com. 6892. TA1070341. $10,450 INCL GST
BONNE SWEEPER/ROAD BROOM HYDRAULIC DRIVE WITH CONTROLS 3 point
linkage, hydraulic drive, with controls, to be serviced. 6877. TA1059344.
$7,950 INCL GST
PLUS ANOTHER WITH
FRONT MOUNTED FORK
MASSEY FERGUSON 240 TRACTOR WITH FEL 2 wheel drive, front end loader, roll
frame, 3 point linkage, full width bucket double acting all round, approximately
3,100 hours indicated, vin no: 1004, engine no: 261165, 8 speed manual, 45
horsepower approximately. 6761. TA1039017.
$21,950 INCL GST
FARMI CH260 MULCHER/CHIPPER 3 point linkage, serial no: 3293800, feed choke
320mm, circa 2007, made in Finland. 6862. TA1067757. $16,750 INCL GST
SICMA COSMAG ROTARY HOE Plus many other rotary hoes in stock. S1820.
TA949345.
$4,650 INCL GST
VERMEER V3550A TRENCHER twin cylinder Deutz, Vin No: 1VRS072P8V1000390,
diesel, front blade & rear chain, approximately 614 hours indicated, tyres excellent,
unit in excellent condition. 6818. TA1044539.
$28,950 INCL GST
KEYLESS ELECTRIC CODE
TradeFarmMachinery.com.au 73
BOBCAT 328G EXCAVATOR (rubber tracked), 3 cylinder diesel, serial no:
284211534, engine no: 04N0777, approximately 2,730 hours indicated, quick
release bucket, 4 post canopy, swivel boom, levelling blade, hammer piping,
950mm Mud Bucket, excellent condition, approximately 3.5 tonne. 6751.
TA1034628.
$34,500 INCL GST
WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA
FFM-FP-5011376-B
WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA

74 TradeFarmMachinery.com.au
37 Cornelia Creek Road
Echuca 3564
Tel: (03) 5482 2788
A/H Damien Trencher 0428 822 788
92 Karook St
Cobram 3644
Tel: (03) 5871 3333
A/H Mario Mete 0438 389 916
CASE PTX600 AIRSEEDER BAR tillage bar, 9 inch
spacings, 39 tines, 8.8 meters sowing, single shoot, Ag
Master harrows, gang v press wheels, Case ADX 2180 air
tank, 6343 lt tank, 60/40 split, single shoot, variable
drive, 4 sets of rollers, ECHUCA 03 5482 2788. S471.
TA1071809. $88,000
NEW HOLLAND T7.250 LWB, 50 khm, front suspension,
front weights, going through workshop, 205 engine hp,
6913 hours, GPS fitted. At our Echuca Dealership
0354822788. S482. TA1086635. $88,000
NEW HOLLAND DURASWATH 25FT draper front for self
propelled mower, twin knives, 25ft or 7.6 meter cut,
Leith trailer with it. At Echuca dealership. S374. TA953475.
$79,200
NEW HOLLAND CR8090 CR 2012, Smarttrax, 1940e &
1264r hrs, optispread chopper, PSD, class 8, Macdon
D60 40ft draper front, located at Shepparton. FINANCE
RATE OFFER from 1.99% *conditions apply. S352.
TA930781. $396,000
ENFORCER M SERIES 35 3.5T, 4WD diesel forklift, 50.1
engine hrs. Rough terrain forklift, 2018 model. 3500kg lift
capacity, 3 stage mast, side shift. Comfort-class
suspension seat, scales. At Shepparton dealership. S413.
TA1002745. $37,500
NEW HOLLAND H7230 Trailing Mower Conditioner, two
point swivel linkage hitch, 540 pto, rubber rollers, new
skids, going through workshop. At our ECHUCA YARD.
Contact 03 5482 2788. S472. TA1076780. $28,600
NEW HOLLAND CR9080 2009, 83C 40ft draper front
(Macdon) on trailer, 2724e & 1971r hrs, twin 22" rotors,
MAV chopper, singles. FINANCE RATE OFFER from 1.99%
*conditions apply. S353. TA930864. $308,000
For our full list of available equipment please visit:
http://echuca-rural.tradefarmmachinery.com.au/
NEW HOLLAND TSA100 4 cylinder, 6542 hrs, 2 sets of
remotes, 460/85R34 rear tyres, 380/85R24 front tyres,
100 hp, Quicke Q950 loader, fitted with soft ride, 2.1
meter bucket, at our ECHUCA dealership 03 5482 2788.
S468. TA1071806. $52,800
WEBSITE UPDATED DAILY http://www.echucarural.com.au
FFM-HH-5011691-A
(03) 5191 9369
RAY MASSARO 0417 887 718
LUKE MASSARO 0448 024 461
www.massaromotors.com.au
KUBOTA L4240HDA
42hp 4cyl Diesel
HST transmission
4WD
Industrial Tyres.
S506. TA1087917.
$47,888
KUBOTA RTV-X1140
Brand New
4 Seater- Converts to
cargo bed
24.8HP Diesel Engine
Hydrostatic
Transmission.
S505. TA1087895.
$27,990
JOHN DEERE 6130
Brand new Rims and
Tyres
Front weight set
Full service
Full cab with air
conditioning.
S466. TA1062779.
$42,990
HONDA PIONEER 1000
Roof
Windscreen
Light bar
*Photos taken as arrived,
contact us for more info.
S498. TA1085331.
$16,990
MASSEY FERGUSON 65
Tractor
4cyl Diesel
Price Includes Slasher.
S490. TA1080909.
$9,990
ISEKI SX75
ROPS Tractor.
S123. TA729228.
$15,990
KUBOTA PH2301
New 3 metre power
harrow, 575mm Packer
Roller.
S454. TA1051093.
$26,990
JOHN DEERE F1145
Deck Mower
3 cyl Diesel
Hydrostatic
Transmission
4WD.
S491. TA1080914.
$9,990
UNKNOWN KOMATSU
Komatsu fork lift.
S477. TA1070014.
$5,500
Large range of New & Used Machinery in Stock
Located at 2-6 BRIDLE ROAD, MORWELL VIC 3840
FFM-HH-5006851-C

TradeFarmMachinery.com.au 75
02 6725 4617
ruralwrecking.com.au
parts@ruralwrecking.com.au
337 Oakwood Road, Inverell NSW 2360
ABN: 48 053 335 667
WANTED TO BUY TRACTORS FOR WRECKING
Parts available for the following makes and models of tractors
CASE
585, 595, 685, 695, 800, 830, 832, 870
2WD, 885, 895, 900, 930, 932, 956, 970,
1030, 1032, 1070, 1194, 1270, 1370,
1390, 1394, 1594, 1690, 2090, 2094,
2096, 2290, 2290, 2294, 2390, 2394,
2470, 2590, 2594, 2670, 2870, 3394,
3594, 4230, 4496, 4694, 4994, 7110,
7210, CVX 170, CX60, MAGNUM 275,
MAGNUM 275, MAGNUM 290, MAGNUM
305, MX80C, MX255, MX285, PUMA,
STX 375 QUADTRACK, STX425, STX440
QUADTRACK, STX450, STX485, STX500
CASE IH
1896, 4690, 4890, 4894, 5120, 5130,
5140, 5150, 7120, 7130, 7140, 7150,
7220, 7230, 7240, 7250, 8910, 8920,
8930, 8940, 8950, 9130, 9150, 9170,
9180, 9250, 9260, 9280, 9350, 9370
QUADTRACK, 9380 QUADTRACK, 9390,
MX90, MX130, MX135, MX150, MX230,
MX240, MX200, MX220, MXM175, MX270,
MXM190, STX375, STX440, STX480
CATERPILLAR
CHALLENGER SERIES – 35, 45, 55, 65,
65C, 75, 75C, 75E, 85C, 85D, 95E, 65E
TRACK MACHINE, MT765D, MT765C
FORD
3000, 3610, 4000, 4600, 4610, 5000,
5610, 5640, 6000, 6600, 6610, 6700,
6810, 7000, 7600, 7700, 7710, 7840,
8000, 8210, 8230, 8340, 8401, 8600,
8700, 9000, 9600, 9700,, TW5, TW10,
TW15, TW20, TW25, TW30
INTERNATIONAL
385, 414, 434, 444, 484, 514, 554, 564,
574, 585, 624, 660, 674, 686, 696, 706,
756,766, 786, 856, 866, 885, 886, 956,
976, 986, 1056, 1066, 1086, 1256, 1466,
1468, 1486, 1566, 1568, 1586, 3288, 3388,
3588, 3688, 3788, 4166, 4186, 4366, 4386,
4568, 4586, 4786, 5088, 5288, 5488, 6388,
6588, 6788, 844S, AW6, AW7, AWD6,
AWD7, B250, B275, W6, W7,
JOHN DEERE
6170R, 950, 1050, 1130, 1140, 1640,
1750, 2010, 2020, 2030,2040, 2120, 2130,
2140, 2250, 2450, 2650, 2850, 3010, 3020,
3120, 3130, 3140, 3350, 3640, 3650, 4010,
4020, 4030, 4040, 4050, 4055, 4230, 4240,
4250, 4255, 4430, 4440, 4450, 4455, 4555,
4560, 4620, 4630, 4640, 4650, 4755, 4760,
4840, 4850, 4955, 4960, 5010, 5020, 5310,
5515, 5300, 6030, 6110, 6200, 6220, 6300,
6310, 6320, 6330, 6400, 6410, 6620, 6630
Premium, 6810, 7210, 7330, 7510, 7520,
7600, 7610, 7700, 7800, 7810, 7920, 7930,
8100, 8200, 8285R, 8300, 8310, 8330,
8345RT, 8400, 8400 TRACK, 8410, 8430,
8360RT, 8440, 8450, 8520, 8520T, 8530,
8630, 8640, 8650, 8760, 8770, 8850, 8960,
8970, 9400, 9410R, 9420T, 9430T
NEW HOLLAND
7840, 8430, 8560, 8870, 8970, 9482,
9682, 9860, 9880, 9882, 9482, 9484,
G210, G240, L85, L95, T6020, T7030,
TG230, TG235, TG255, TG285, TJ375,
TJ425, TJ450, TM125, TM135, TM195,
TN55D, TN95F, TS100, TS100A, TS110A,
TS125A, T9060
STEIGER
KP525, KP 1350, KP1325, KP1400,
BEARCAT 3 & 4, COUGAR 2 & 4 CM250,
PANTHER 2, PANTHER 3 ST310 & ST325,
PANTHER 4 CM325, TIGER ST470,
VERSATILE
500, 700, 800, 835, 855, 875, 895, 900,
935, 945, 946, 950, 956, 975, 976, 1150,
1156
ALSO WRECKING
VARIOUS MODELS OF
CHAMBERLAIN, DEUTZ FAHR, FIAT, JCB,
LAMBORGHINI, MASSEY FERGUSON,
MCCORMICK, SAME
– CALL US TO ENQUIRE
Follow us on Facebook to keep
up to date with new stock that’s
regularly coming in.
@ruralwrecking
Wrecking largest range of tractors in Northern NSW
FFM-FP-5211221-TS-396

Powered by
www.TradeFarmMachinery.com.au
* Based on stock items for sale as at March 2020

4/3/20, 2:48 pm
Page 1 of 1
4/3/20, 2:48 pm
Page 1 of 1
Find new and used Tractors for sale with Farms & Farm Machinery
magazine
Page 1 of 188 (1,875 results)
Sort by Premium Ads
Find new and used Tractors for sale with Farms & Farm Machinery
magazine
Page 1 of 188 (1,875 results)
Sort by Premium Ads
Tractors / Tractors / 0-40hp
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD
FEL: YES Rated Engine Power - hp: 28
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380
hours indicated, with books, approximately 28 horsepower, AS NEW *price
includes gst
Mclaren Vale, SA
list
map
Tractors / Tractors / 0-40hp
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD
FEL: YES Rated Engine Power - hp: 28
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380
hours indicated, with books, approximately 28 horsepower, AS NEW *price
includes gst
Mclaren Vale, SA
list
map
$24,750 $160,000
$199,980 $50,000
CASE IH 695XL. 70hp, Cabin, Challenge 349E 2016 GVM Mako. Spra coupe, 2vm boom, 2018 New Holland T7-260. 220hp, L4500 2017 Kioti RX8030SP. ROPS, Loader & 4in1,
front end loader + more • NSW 0429 467 147 1500L tank. • NSW 0488 442 372
loader + much more • VIC 0402 851 544 had only light work • QLD 0437 113 771
items for sale
Trucks, utes and
in print & online
4x4s now for sale!
RESEARCH • COMPARE • BUY • SELL
AUSTRALIA’S #1
FARM MACHINERY MARKETPLACE *
BUY
More than 40,000 tractors,
spreaders, harvesters, hay tools,
feeders, sprayers, trailers, and
attachments, and other parts and
accessories currently listed for sale
SELL
Unlimited
stock listings on
TradeFarmMachinery.com.au
for just
$360 per month
SPRAYERS
8 PAGE SPECIAL FEATURE
Issue 382 > $7.95 > On sale 27/02/20
Tractors, farm machinery & materials handling equipment for sale
>> TESTED
Four High, Two Tonne
Tobroco Giant 6004 Loader
Off the Chain
Hustler’s Chainless LX104 Bale Feeder
Fully Charged
Ram 1500 Laramie V6 Ecodiesel
BAUER TRADER MEDIA
SEARCH
NEW AND USED TRACTORS FOR SALE IN
AUSTRALIA BAUER TRADER MEDIA
NEXT
SEARCH
NEW AND USED TRACTORS FOR SALE IN
AUSTRALIA
GET ALERTS
CASE IH MAXXFARM 25 TRACTOR NEXT
$19,750
GET ALERTS
CASE IH MAXXFARM 25 TRACTOR
$19,750
! CALL 08 7007 6847
,!3BD0A6-aaejdg!:K;N
Czech
Serafin Machinery brings Czech manufacturer
Farmet’s range of deep and disc cultivators to
the local market >> Page 14
44,480+
MATE
8,340+
SAVE ITEM
EMAIL SELLER
KUBOTA 8540
! CALL 08 7007 6847
$22,000
SAVE ITEM
EMAIL SELLER
KUBOTA 8540
$22,000

78 TradeFarmMachinery.com.au
CASE IH PUMA 165 2014, FWA/4WD Cab - Tractor
only, Hours: 8875, Eng Power: 165 Hp Boosted Max
210 Hp , VIN/Serial #: ZCBH52967. New Front tyres,
Tractor has been throught the workshop and is
ready. ZCBH52967. TA1034669. $67,000
KUBOTA M135GX 2017, 3175 Hrs, Front axle
suspension, Front fenders, Intelli shift 24x24 F/R
Transmission. Row Crop tyres. Currently going
through the workshop to be ready for immediate
delivery. SN54040. TA1084814. $66,000
CASE IH DCX131 2003, Mower conditioner, 4m steel
rollers with travel buggy. Located Tasmania. Call Tas
Mundy 0400 077953. NCA0096353. TA1077189. $25,000
SAMASZ KDTC341 2020, Mower 3.4m Cut, Shaft
drive, Spring flotation, Hydraulic breakaway. As new
condition, RRP $26,000.00 Save $$$ on the best
mower on the market today. Located in our Maffra
branch. 0055204. TA1077050. $19,800
KUHN GMD 310F 2018, 3 metre flail Mower
Conditioner, "DEMO MODEL". Located Tasmania. Call
Simon Maloney 01419 348023. A0955. TA1005568.
$25,000
FELLA SM310 FZ SM 310 Front and Rear 2011, 6.2m
overall cut. Workshop repaired and serviced and has
been fitted with full set of new blades. VIN/Serial #:
CDA00317. Located in our Maffra Branch. CDA00317.
TA1065699. $14,000
AMAZONE KG 5001 - 2 2018, Power Harrows, Near
new Amazone Power Harrow and Amazone ISOBUS
Seeder c/w custom Stainless Steel Hopper. Hard
faced blades and has ISOBUS Seeder Monitor.
TBA123. TA1033464. $88,000
LELY MULTIDISC 400 2006, Folding, 4 metre, SPEED
DISCS with Air seeder and crumbler rollersr. Located
Tasmania. Call Simon Maloney 0419 348023.
06538112. TA1077058. $26,500
SIPMA ZK650 WIR 2018, Rakes 6.5metre rake, one
season old. Located Trafalgar. Call Ron Hampton
0412 544077. 00036. TA1051162. $24,500
LELY 805 MASTER 805 2010, Rakes. Been through
workshop. Twin rotor, rear wheel steering, 7.8m
working width. Presents well *** Finance available
***. 3056491. TA926771. $19,900
MASCHIO PANTERA 470 2010, Folding Rotary Hoe.
Located Trafalgar. Call Andrew 0408 368 326.
059720011. TA1064588. $28,000
SIPMA ZK650 WIR 2018, Rakes 6.5metre rake, one
season old. Located Trafalgar. Call Ron Hampton
0412 544077. 00036. TA1051162. $24,500
NEW HOLLAND 650 650 baler, Round Baler, netwrap.
Located Tasmania. Call Simon Maloney 0419
348023. 910943. TA1077051. $8,500
VICON RV1601 Round Baler/Wrapper Combination,
paddock ready. Located Trafalagar, Call Andrew
Noonan 0412610903. RW0000033. TA1062292. $55,000
WELGER RP435 2008, Round Baler, Bales: 24000,
VIN/Serial #: 175515528, Net and Knives.
175515528. TA961700. $27,000
GENDORE T1400SF 2003, Bale Wagon/Feedout,
VIN/Serial #: 2140. 2140. TA1039349. $19,800
NEW HOLLAND 658 Round Baler NETWRAP, 27000
bales. Located Longford. Call Simon Maloney 0419
348023. 976001. TA1077059. $14,000
KUHN VB2190 Round Baler, netwrap, 22000 bales.
Located Tasmania. Call Tas Mundy 0400 077953.
VGRL001969. TA1077060.
POA
LELY V160 Round Baler, Netwrap. Located
Tasmania. Call Simon Maloney 0419 348023.
175800272. TA1077054. $22,000
GALLIGNANI GAV9 V9 Round Baler, net wrap, V9
TM3. TBAV9TM3. TA1077048. $16,500
FFM-FP-5099410-A
TRAFALGAR
8-14 Saleyards Road,
Trafalgar, VIC 3824
Tel: 03 5633 1588
MAFFRA
2 Empire Place,
Maffra, VIC 3860
Tel: 03 5141 1700
LEONGATHA
120 Horn Street,
Leongatha, VIC 3953
Tel: 0475 004 436
LONGFORD
6-8 Wellington Street,
Longford, TAS 7301
Tel: 03 6391 2411
Email: admin@ttmi.com.au
ttmi.com.au
ttmi.gippsland
ttmi.asmania

TradeFarmMachinery.com.au 79
Hado Pty Ltd ATF Intersales Unit Trust
ABN 64 160 069 925 / ACN 001373 726
80 Hoskins St, PO Box 178, Temora NSW 2666
Ph: 02 6977 1933
270-272 Hammond Ave, Wagga Wagga NSW 2650
Ph: 02 6951 5515
8-14 Oakes Road, Griffith NSW 2680
Ph: 02 6962 6831
www.intersales.com.au - admin.temora@intersales.com.au
CASE IH 8120
2011, 2387 eng hrs, 1828 rot hrs, Chopper, dual 620/70r42 drive tyres, 40%, 600/65r28
steer 60%, pro 600 yield and moisture, drive lights, UHF, radio, Trimble 500/ Ez steer,
no front, To be serviced. YBG212754. TA1078948.
$242,000
CASE IH 4430
2016, Case IH 4430 Aim Command pro , 6000l 36.5 MT, approx. 1750 eng hrs. 760
spray hrs, 480/80r42 tyres and guards 50%, auto fold and height control, RTX 372
receiver, Nav, Pro 700 auto steer, 5 height sensors, auto grease, Chemical inductor,
recirculation and flush system fitted, banjo 2 hydraulic fill pump, to be serviced, due in
end December 2020. YGT042638. TA1066661.
$418,000
CASE IH 7088 7088 2009, Combine. Base Unit only. 2915 Rotor
Hours and 3884 Engine Hours. Front 900/60 R30 and rear 540/65
R30 50%. Full Preseason and service done. Pro 600 Screen,
Ezi-steer 500 steering system, Camera kit with Monitor. Tidy unit.
Located In Griffith. Y9G001425. TA1066305. $125,000
CASE IH 8240 with 40ft D65 and trailer 2016, 1495 eng, 1094 rot,
40ft D65 Macdon draper front, cross auger 800/70r38 drive 80%,
600/65r28 steer 60%, 1 x camera, Nav, 372 RTX, pro 700 auto steer,
folding grain tank extensions, radio, UHF, HID lights, folding unloader
auger, Intersales 4 axle trailer. YGG231354,. TA1078950. $506,000
CASE IH 8120 with 45ft 2152 and trailer 2011, 3114 eng hrs, 2584
rot hrs, dual 620/70r42 drive tyres, 60%, 600/65r28 steer 90%, pro
600 yield and moisture, 45ft 2152 draper front, cross auger 4 axle
Intersales trailer, guards, lights. Steer ready only. YBG212313,.
TA1078949. $247,500
CASE IH 7230 40ft 2152 and trailer 2013, 1796 Eng, 1534 Rot,
800/70R38 drive, 620/70r26 steer tyres, rock trap, fold unload auger,
self-level sieves, CVT direct drive rotor, power grain tank covers,
UHF, radio, pro 700, nav, 372 RTX, 40ft 2152 draper front, P/U reel, 4
axle Intersales trailer. YDG219585. TA1078947. $385,000
MACDON M205 2017, 2016 build, 2017 model Macdon M205
windrower tractor, 3290 eng hrs, 2590 cutting hrs 600/65r28 drive
tyres, 16.5l 16.1 casters, light bar side lights, UHF, radio, reversible
console, Cummins eng, 40kmh transport speed. smit83. TA1076432.
$121,000
MACDON R85 2016, 16ft mower conditioner, hydraulic drive, steel
intermeshing conditioner rollers, forming shields, skids, tidy order
shedded. mcrae832. TA1078448. $57,200
CASE IH 8240 D145 front and trailer 2017, 724 eng, 580rot 45ft
D145 Macdon draper front, windrower ready, hrs, 800/70r38 drive
90%, 600/65r28 steer 90%, 3x camera, Nav, 372 RTX, pro 700 auto
steer, HD transition cone, hard faced augers, rotor cover plates,
radio, UHF, HID lights, folding unloader auger, cross auger.
YJG235706.. TA1078945. $660,000
CASE IH 7240 2017, 1232 eng, 1010 rot hrs, IF 800/70r38 drive 90%.
600/65r28 steer 90%, 3x camera, Nav, 372 RTX, pro 700 auto steer,
hard faced augers, rotor cover plates,radio, UHF, HID lights, folding
unloader auger, serviced. john83---. TA1078946. $396,000
NEW HOLLAND T8.435 T3435 2015, T8-435 Smartraxx. 1400 hours,
Front Linkage High Spec Cabin. Steer Ready, Intelliview 4 screen, 5
rear remotes with joystick, rear Linkage with quick Hitch.420/85 238
Front and 18 inch rear tracks on 2.0m centres. Located in Griffith.
83304. TA1079055. $250,000
FLEXI COIL ST830 BAR & SC180BIN 34ft, 58 tynes, 350lb trips, 4 row
finger harrows, single shoot, small seeds heads and hoses, wedge
points and adaptors, New Holland Flexi-Coil SC180 THB trike air cart,
PJ greens small seeds, hydraulic auger, A-1 condition. weck83.
TA1077378. $104,500
DIECI AGRI PLUS 40.7 2017, Just Traded, 2017 Dieci Agriplus 40.7
PS evo Telehandler. Complete with GP bucket and pallet forks. 1000
engine hours, 4 speed powershift, FPT Diesel Engine. A/c Cabin.
Extra Lighting UHF. Located In Griffith. xzc1561558. TA1058832.
$110,000
FLEXI COIL PD5700/3850 PD5700/3850 2012, Parallellogram Precision Hoe Drill
60' (18.3mt) Width in 5 sections 12" spacings on 3 ranks, 5.6mt transport width 60
row units - Double shoot opener, Smooth profile packing wheel, individual depth
control and fully adjustable breakout (275-55lb) from the cab seat Seeder is
matched up with a Flexicoil 3850 tow behind Air Cart 3 bin 380bu Capacity
(13,400lt) Split in litres 4,150/3,300/5950 Flexcontrol IV 254mm (10") Load/unload
auger. 5700GOW. TA1029421. $198,000
HARDI UNKNOWN 7030 COMMANDER 7000 litre with 30m force
boom. Hydraulic lift, fold and Wing Tilt. Single Nozzles, adjustable
suspension axle, Hydraulic turn assist, Hardi 5500 controller. 3 inch
Fill Hydraulic drive 464 pump. Mudguards and rear oversize sign kit.
20..8 r42 wheel gear. Sold as is Located in Griffith. $38,500 (INC).
0406004269. TA1080538. $38,500
JCB FASTRAC 3185 1998, 5,240 hrs, 1998 Model, Approx 185 HP,
FWA /4WD, Front Tyres -520/70 R30 @ 10%, Rear Tyres Near New, 3
point Linkage, PTO, 3 Rear remotes, Passenger Seat, A/C, UHF, New
Power Steering and Suspension Hydraulic Pump, Serviced-Engine
Oil/Fuel/Air Filters Replaced, Light Bar. coe83. TA1076434. $50,600
CASE IH MAGNUM 305 2007, 8408 hrs, 480/80 R50 duals inner tyres
90% outer tyres 30%, 480/70 R34 front tyres 85%, front weights,
linkage, uhf, radio, 4 hyd remotes, front axle suspension, no steer.
gayn83. TA1077376. $82,500
CASE IH CVX1170 with loader 2009, 9000hrs, LSX challenge loader,
4 in 1 bucket, bale spike, electro 3 junction control, 50 KMH CVT
trans, front axle and cab suspension, rear 3pt linkage, 540/540E
1000 pto, drawbar, 3 rear electro remotes, cruise control. To be
serviced. 83298waer. TA1077377. $66,000
FFM-FP--5011483-D

80 TradeFarmMachinery.com.au
COLAC | WARRNAMBOOL | BALLARAT
357 Princes Highway, Colac West, Vic, 3250
Colac 03 5231 6322 Warrnambool 03 5561 1733 Ballarat 03 5331 0177
SEED HAWK SH40-10\45 45 series air seeder, 40ft
work width. 12.2 mtr 10 inch spacing, seedhawk
parallel tine seeding system, air kit. HC2096.
TA1081753. $148,500
CLAAS ARION 660 CMATIC Fully suspended air cab,
C-Matic vario transmission. 50 kph, front
suspension, front 3pl & PTO, GPS steer kit Trimble.
1060 hours, One owner. CONSCO. TA1089485.
$180,000
AMAZONE ZAM 3000 ULTRA 3000 LTR twin disc
spreader with cover, controller, 24 - 48 mt discs.
ZAM0080758. TA1026701. $15,000
DEUTZ M600 Contact Scott 0429 316 322. Air cab,
24 x 24 power shuttle. 40 kph. Loader, bucket &
forks. Front guards. CONSC2. TA1090821. $77,000
HARDI NAVIGATOR 4000 4000lt x 24mt boom, 3
section control, granni pot, fast filler, 2015 model.
HC1714. TA961496. $37,000
CLAAS ARION 530 T4 2017, fully suspended air cab,
24 x 24 hexactiv 40 kph, 4 speed PTO Stoll loader,
bucket & fork. 3rd function, fully serviced, ready to
go. CONSC3. TA1090824. $82,000
AMAZONE CATROS 3001 3 mt, 3 pl Catros C/W cage
roller, adjustable front discs. HC2042. TA1074342.
$12,000
VADERSTAD RDA600C Rapid 600C seed / fert 6000
Lt split hopper, near new discs & boots. Loading
auger, Ipad control. Fully workshop checked.
Paddock ready. HW492. TA1080051. $165,000
JOHN DEERE PLANTER 1770 Precision planter,
isobus, section control, front coulter discs. 3.5m
transport. HC2006. TA1050087. $63,800
VADERSTAD 400S RAPID 7400 Hectares, 5"
spacings, 4m working width. Seed & Fertiliser. Good
condition. HW398. TA1072932. $99,000
MCHALE V660 baler 25,000 rolls. Has just had full
workshop service. All chains replaced. CONANS.
TA1090811. $39,500
BOGBALLE SPREADER Twin spin spreader, 12
months old. rate control, folding tarp. Hydraulic
drive. 10 - 42 mt. CONBO. TA1089484. $27,000
GILTRAP RF16 16 cu3 tandem axle. Tandem axle
wagon, side feed. One owner. Workshop checked &
ready to go. HC1962. TA1084907. $31,000
AMAZONE CIRRUS 6003-2C 10,500 ha. 5" spacing,
loading auger, small seed box. Excellent condition.
HW458. TA1079397. $82,500
DEUTZ AGROTRON 180 Contact Scott 0429 316 322.
Air cab, front weights, 24 x 24 power shuttle, 4
speed PTO. CONSC1. TA1090816. $92,500
SCOTT O’HANLON 0429 316 322
GREG HARRINGTON 0438 786 035
JAMIE DUNN 0427 469 400
TREVOR BANT 0459 469 456
www.claasharvestcentrecolac.com.au
FFM-HH-5166595-B
Tim Harper 0429 578 881
Rocky River Ag Services
CRYSTAL BROOK SA
Ph 08 8636 2772
Sales, Service & Parts
ABN: 961 614 184 01
lsmart@rockyriverag.com.au
www.rockyriverag.com.au
CASE IH MAGNUM 290
c/w front & rear duals, powershift trans, 2011 model, good
condition. 51138. TA1082064.
$148,500
FLEXI COIL 5500
60ft Air Drill, 10" spacing, c/w hyd tynes, 4" presswheels, Flexi-Coil
single shoot air kit, very good condition. 51132. TA1090633.
$242,000
CASE IH 7140
Axial flow combine, c/w 3152 40ft front, straw chopper & upper
cross auger, CROP READY. 51026. TA971303.
$374,000
CASE IH 7230
Axial Flow Combine, c/w 40ft 3152 Draper Front, Rocktrap, Straw
chopper, good condition. 51054. TA988977.
$335,500
CASE IH 2300
TBH, 8000Lt, 2 bin Air art, c/w single sowing kit, good condition.
51128. TA1090632.
$19,800
CASE IH 3152
35ft Draper Front, c/w upper cross auger, excellent condition.
51062. TA1074377.
$38,500
FFM-HH-5012302-A
Brad Page 0428 833 193 • David Cliff 0427 859 960 • Lynton Smart 0427 859 967 • Tim Harper 0429 578 881

TradeFarmMachinery.com.au 81
DONALD
Ph. 5497 1203
Terry 0427 971 203
Clinton 0407 108 407
MICHAELS
BALLARAT
Ph. 5336 4145
Andrew 0429 364 745
MOAMA
Ph. 5480 0731
Brad 0428 300 883
Terry 0427 971 203
JANKE F500 UDD PLANTER 2004, 45'@12", banding,
press wheels. AS1390. TA820146. $87,450
EZEE-ON 3550 2003, 40' @ 10". AS822. TADPLIn107338.
$53,900
NEW HOLLAND SC180 1998, 180 Bushel / 6343 Litre, 2
bin, castor quad, auger. AS1355. TA739946. $53,900
SIMPLICITY 4000DTR 1991, 5700 Litre, 2 bin, tow
behind. AS1382. TA984613. $20,900
SIMPLICITY 9000TB3 2000, 9000 Litre, 3 Bin, Auger.
AS1517. TA1036085. $86,900
MORRIS CONCEPT 2000 2002, 35' @ 9", 7130 trailed 2
bin, ssb, auger, p/wheels. AS1248. TA509568. $86,900
HORWOOD BAGSHAW AIRSEEDER COMBINATION
1997, Scaribar 36' @ 8.75", Streamline 4000 Li, 2 bin,
spur gear drive. AS1489. TA1036083. $65,450
HORWOOD BAGSHAW UNKNOWN 4000 Streamline
1984, 2 bin, 4000 litre, spur gear drive. AS1250. TA534881.
$27,500
DIECI DEDALUS 28.7 2005, Poultry Pro, hydro, aircond,
6.3 metre x 2.8 tonne, 3676 hours. AS1477. TA970216.
$65,450
4WD TRACTORS
IHC 3588 Snoopy, 167hp, 4800hrs
JCB 155-65 FASTRAC, 150hp, 3PL, 5500hrs
JCB 155-65 FASTRAC, 150hp, 3PL, 7300hrs
JCB 155-65 FASTRAC, 150hp, 3PL, 8000hrs
JCB 185-65 FASTRAC, 185hp, 3PL, 4900hrs
JCB 185-65 FASTRAC, 185hp, 8000hrs
JCB 3185-65 FASTRAC, 185hp, 3PL, 8700hrs
JCB 3220-65 FASTRAC, 220hp, 3M Track, 3PL, 6990hrs
JCB 3220-80 FASTRAC/SPREADER, 220hp, 11200hrs
JCB 3230-65 FASTRAC/SPREADER, 230hp, 5825hrs
JCB 3230-80 FASTRAC/SPREADER, 230hp, 11000hrs
2WD TRACTORS
IHC 5088, 150hp, 4750hrs
FWA TRACTORS
CASE IH MAXXUM 130 / FEL, 130hp, 3PL, 2700hrs
CASE IH MX170, 161hp, Fr & Rr 3PL – pto, 9500hrs
CASE IH MX200, 200hp, 3PL, 8750hrs
DEUTZ AGROTRON TTV610 / FEL, 165hp, 2600hrs
FORD 6640SLE, 85hp, 3PL, 5100hrs
FORD 7710, 100hp, 3PL, 8650hrs
JCB 8250 FASTRAC, 260hp, 3PL, 3850hrs
JOHN DEERE 6210 / FEL, 90hp, 3PL, 6700hrs
MISCELLANEOUS
BLIGHTY ENG’ 30’ Rubber tyre Roller
BROONS Combination Roller
BURDER 9000 FEL Kit – JCB 8250
CASE 480E Loader, a/c, 10000hrs
CASE 580E Backhoe Loader
CIH MX 460/85R42 dual kit (80% tyres)
JCB 3CX-2WD Backhoe Loader 7900hrs
JCB 3CX-2WD Backhoe Loader, 12745hrs
JCB 4CX Backhoe Loader, a/c, 11000hrs
JCB 411HT Wheeled Loader, a/c, 2500hrs
JCB 8018CTS Excavator, 1.6T, 1100hrs
JCB 8025ZTS Excavator, 2.6T, 705hrs, Plant Trailer
JD H480 FEL Kit – 7000 Series
KOMATSU PC78MR-6 Excavator, 7T, 3600hrs
KOMATSU WA300-3E Wheeled Loader, 16000hrs
SIMPLICITY Small Seeds Box suit 8200TB3
VICTORY VL200 Wheeled Loader, 1385hrs
WCM 30 Wheeled Loader, 2800hrs
COMBINES
CONNOR SHEA 14 Row Pasture Drill, coulters, roller
JCB 527-58 AGRI, a/c, 1800hrs, 5.8m x 2.7t
JCB 527-58 AGRI, a/c, 2950hrs, 5.8m x 2.7t
BARS
GASON 50’@10” Scaritill, Kelly rotary harrows
HORWOOD 20’ Scaribar, 10.5”
JANKE F400 UDD Planter, 40’@12”
JANKE F500 UDD Planter, 40’@12”, coulters, p/wheels
JANKE F400 UDD Planter, 50’@12”, bdg, p/wheels
JOHN DEERE 735 40’@10”, p/wheels
AIR SEEDERS
FLEXICOIL 2640, 3 bin, trailed quad, auger
HORWOOD 4000 ELEC DRIVE, 2 bin trike, SSB
SHEARER (EEZE ON) 2175, 5T Trike, SSB, auger
SIMPLICITY 2500DTR
SIMPLICITY 4000TB
SIMPLICITY 4000DTR
SIMPLICITY 12000TQS2, SSB, auger
TELEHANDLERS
CAT TH336 AGRI, a/c, 2570hrs, 6m x 3.3t
CLAAS 7045 PLUS SCORPION, a/c, 3000hrs, 7.1m x 4.4t
DIECI DEDALUS 28.7, a/c, 315hrs, 6.3m x 2.8t
DIECI 30.9 AGRI, a/c, 3200hrs, 9m x 3t
JCB 525-58FS, 6000hrs, 5.8m x 2.5t
JCB 525-67FS, a/c, 7000hrs, 6.7m x 2.5t
JCB 526-55, a/c, 10675hrs, 5.5m x 2.6t
JCB 527-55, a/c, 2630hrs, 5.5m x 2.7t
JCB 527-58 AGRI, a/c, 1000hrs, 5.8m x 2.7t
JCB 527-58 AGRI, a/c, 5650hrs, 5.8m x 2.7t
JCB 527-58 AGRI, a/c, 6775hrs, 5.8m x 2.7t
JCB 527-58 T4i AGRI PLUS, a/c, 1000hrs, 5.8m x 2.7t
JCB 530-70, a/c, 6000hrs, 7m x 3t
JCB 530-70, a/c, 6200hrs, 7m x 3t
JCB 530-70FS, a/c, srs, 3000hrs, 7m x 3t
JCB 530-70FS, a/c, 6250hrs, 7m x 3t
JCB 530-70FS, a/c, 7500hrs, 7m x 3t
JCB 530-70FS, a/c, srs 7000hrs, 7m x 3t
JCB 540-70FS SUPER, a/c, srs, 2000hrs, 7m x 4t
JCB 530-70FS, a/c, srs, 10000hrs, 7m x 3t
JCB 540-70FS SUPER, a/c, srs, 6300hrs, 7m x 4t
JCB 530-70FS SUPER, a/c, srs, 5470hrs, 7m x 3t
JCB 541-70 AGRI SUPER, a/c, srs, 3050hrs, 7m x 4.1t
JCB 530-70FS SUPER, a/c, srs, 5500hrs, 7m x 3t
JCB 530-70FS SUPER, a/c, srs, 6000hrs, 7m x 3t
JCB 541-70 AGRI SUPER, a/c, srs, 4725hrs, 7m x 4.1t
JCB 531-70CE, a/c, 5900hrs, 7m x 3.1t
JCB 541-70 AGRI SUPER, a/c, srs, 5200hrs, 7m x 4.1t
JCB 531-70CE, a/c, 7200hrs, 7m x 3.1t
JCB 541-70 AGRI SUPER, a/c, srs, 5700hrs, 7m x 4.1t
JCB 531-70CS, a/c, 6850hrs, 7m x 3.1t
JCB 531-70 AGRI, a/c, 3350hrs, 7m x 3.1t
JCB 541-70 AGRI SUPER, a/c, srs, 6500hrs, 7m x 4.1t
JCB 531-70 AGRI, a/c, 3400hrs, 7m x 3.1t
JCB 541-70 AGRI SUPER, a/c, srs, 7250hrs, 7m x 4.1t
JCB 531-70 AGRI, a/c, 4900hrs, 7m x 3.1t
JCB 541-70 AGRI SUPER, a/c, srs, 8900hrs, 7m x 4.1t
JCB 531-70 AGRI, a/c, 6300hrs, 7m x 3.1t
JCB 531-70 AGRI, a/c, 8300hrs, 7m x 3.1t
JCB 541-70 T4i AGRI SUPER, a/c, srs, 1750hrs, 7m x 4.1t
JCB 531-70 AGRI, a/c, 11600hrs, 7m x 3.1t
JCB 541-70 T4i AGRI SUPER, a/c, srs, 3900hrs, 7m x 4.1t
JCB 531-70 AGRI, a/c, srs, 4100hrs, 7m x 3.1t
JCB 550-80 AGRI PLUS, a/c, srs, 2250hrs, 8m x 5t
JCB 531-70 AGRI, a/c, srs, 6300hrs, 7m x 3.1t
JCB 531-70 AGRI SUPER, a/c, srs, 4770hrs, 7m x 3.1t
JLG 4013, a/c, 7700hrs, 13m x 4t
JCB 531-70 AGRI SUPER, a/c, srs, 5850hrs, 7m x 3.1t
MANITOU MVT628T, 4400hrs, 6.8m x 2.8t
JCB 531-70 AGRI SUPER, a/c, srs, 6000hrs, 7m x 3.1t
MANITOU MLT633TLS, a/c, 5500hrs, 6m x 3.3t
JCB 531-70 AGRI SUPER, a/c, srs, 6940hrs, 7m x 3.1t
JCB 531-70 AGRI SUPER, a/c, srs, 7000hrs, 7m x 3.1t
MANITOU MT728-4, 7800hrs, 7m x 2.8t
JCB 531-70 AGRI SUPER, a/c, srs, 7100hrs, 7m x 3.1t
MANITOU MLT731, a/c, 4200hrs, 7m x 3.1t
JCB 531-70 AGRI SUPER, a/c, srs, 7160hrs, 7m x 3.1t
MANITOU MLT731, a/c, 6000hrs, 7m x 3.1t
JCB 531-70 AGRI SUPER, a/c, srs, 7200hrs, 7m x 3.1t
JCB 531-70 AGRI SUPER, a/c, srs, 9800hrs, 7m x 3.1t
MANITOU MT732, a/c, 4300hrs, 7m x 3.2t
JCB 531-70 T4i AGRI SUPER, a/c, srs, 4750hrs, 7m x 3.1t MANITOU MLT741-120LSU, a/c, 7100hrs, 7m x 4.1t
JCB 531-70 T4i AGRI SUPER, a/c, srs, 7200hrs, 7m x 3.1t
MERLO P40.7, a/c, 2800hrs, 7m x 4t
JCB 535-95, a/c, 4500hrs, 9.5m x 3.5t
NEW HOLLAND LM630, a/c, 9600hrs, 6m x 3t
JCB 535-95C, a/c, 3850hrs, 9.5m x 3.5t
JCB 536-70 T4i AGRI SUPER, a/c, srs, 6240hrs, 7m x 3.6t NEW HOLLAND LM435A, a/c, 3000hrs, 6.8m x 3.1t
www.michaelsofdonald.com.au
FFM-FP-5011792-B

82 TradeFarmMachinery.com.au
Lyndoch Motors
Phone: (08) 8524 4140
Jeffrey Both: 0428 844 271
AH: (08) 8563 2387 SA
Graham Ahrens: 0429 846 011
AH: (08) 8524 4309 SA
Duncan McInereney
AH: 0427 245 140
Visit our site: www.lyndochmotors.com.au
email: sales@lyndochmotors.com.au
COBRAM FARM EQUIPMENT PTY LTD
Ph (03) 5872 1722 (03) 5872 1265
A/H (03) 5865 8262
Lot 3, Murray Valley Highway
PO Box 26, Cobram, Vic 3644
ACN 086 668 108
MASSEY FERGUSON
POOLE &
JACKSON
SPEED & WALPEUP
ABN 28 100 780 069
Ph: 03 9998 4998
PTY LTD
CASE IH 4430 2012, Patriot sprayer with Aim Command, 6000 litre tank,
36.5 metre 7 section boom, auto steer with a Nav controller & 372
receiver, 13.6R42 tyres, boom prime & flush, hyd. banjo fill pump, has
been workshop checked & serviced. S253. TA1082080. $242,000
NEW HOLLAND H8080
Windrower with 15.5ft disc mower conditioner,
Mow Max front, also 25ft draper end knives and
trailer. S31. TA759375.
POA
GRAINLINE AUGER A range of new 8 and 10 Grain Line Augers Available.
S53. TA1086653. POA
CASE IH 340 2012, Magnum 340 Ultimate powershift tractor, 520/85R46
dual rear, 480/70R34 dual front, 3 point linkage, 50 km/hr trans, 3900
hours. S254. TA1082081. $198,000
HARDI COMMANDER 5030 2003 Commander V 5000 Litre tank 30mtr boom
463 spray pump pilot controller triplet nozzles chemical hopper.
OBC. S47. TA1016214. $22,000
CASE IH 8230 2012, r/trap, chopper, 40' 2152 draper c/w hyd. top link,
float optimiser, levelling wheels & cross auger, pre season serviced 1608
s/hrs. S255. TA1082082. $352,000
COMBINES
Case IH 8240, 2017 build, 1192 sep hrs, rock trap, chopper,
singles, 2018 MacDon FD140 flex draper, x auger, coming in .................$506,000
Case IH 7230, 2015 build, 1430 sep hrs, chopper, singles,
MacDon FD75 40’ flex draper, x auger, coming in ...................................$396,000
Case IH 8230, 2014 build, 1812 sep hrs, rock trap, chopper,
singles, 2013 40’ 2162 flex draper, x auger, coming in ...........................$385,000
Gleaner R75, 1500 s/hrs with 1 season old 35’ Agco
9250 Dyna Flex draper front, very tidy machine .....................................$165,000
HAY
Case IH LBX 432, 2008 build, 4’x3’, single axle, approx.
14,000 bales, auto-lube, one owner .........................................................$71,500
Krone EasyCut 3210CRI Mower Conditioner, 2011 build,
centre pull, 3.2m cut, poly chevron rollers, 1000 PTO, avail. Sept. ............$22,000
Krone 2015 1290 HPD XC 4 x 3 baler, tandem wheels, chopper,
auto lube, scales, Gazeeka moisture meter, 36,500 bales coming in ......$121,000
Kuhn VB2190, 2014 build, approx. 28,500 bales,
6’ variable chamber, rotor feed, net, available Aug/Sept 21 ......................$23,100
SPRAYERS
Hardi 8536 Commander 2, 2012 build, delivered 2015 with updates to
2015 spec by Hardi, 8500 litre tank, 8500 controller with auto section,
36 m Terra Force boom with Norac auto height, hyd. Filling pump, hyd.
Product pump, tank gauge, hyd brakes ....................................................$97,900
Hardi 5036 Commander 2, 2012 build, 5500 controller with Jobcom,
5000 litre tank, 36 m Force boom with 6 sections, tank gauge, PTO pump ...$55,000
TILLAGE & SEEDING
Morris 7240 Air Cart, 8000L, 2 bin, Tow between, ground drive,
monitor, auger OBC ..................................................................................$44,000
Horwood Bagshaw, 2008 build 35’ Narrow Centre Scaribar,
10.5” spacing, Knuckey sownpress wheels, 6000 l trike with
auger, Topcon controller coming in .........................................................$115,500
Horwood Bagshaw 2006 27’ Scaribar, Agmaster flex boots,
RFM coil press harrows, 1996 build 3000 litre trike air
seeder hopper, zero max boxes OBHC ......................................................$77,000
Horwood Bagshaw 4000 trailed air seeder hopper, 2005 build,
2 bin, blending metering system, Topcon Eagle controller with
electric variable rate drive ........................................................................$27,500
Kuhn EL92-230 Rotary Hoe, 2014 build, 2.3 m work width,
crumble roller, side separating disc, 540 PTO ...........................................$12,100
TRACTORS
Case IH 7120 Magnum, approx. 9250 hrs, drawbar, dual PTO,
20.8x38 & 14.9x28 tyres .........................................................................$33,000
John Deere 7800, 1998 build, 520/85R38 rear & 420/85R28 front,
9900 hrs ..................................................................................................$33,000
FFM-TV-5012485-A
JOHN DEERE 6430 PREMIUM
115hp with JD 653 loader bucket and forks, one
owner, in excellent condition.
S41. TA1086654.
POA
TRACTORS
JOHN DEERE 6430 115HP FITTED WITH JD FRONT END LOADER ............................................................ POA
CASE MXM 190 190HP FWA A/C CAB FRONT END LOADER ..................................................................... POA
MASSEY FERGUSON 6265 105hp FWA A/C Cab Quicke Loader ............................................................... POA
MASSEY FERGUSON 5465 110 H.P. FWA A/C CAB one owner tractor ...................................................... POA
MASSEY FERGUSON 6445 90 HP A/C Cab One owner tractor in excellent condition .............................. POA
CASE MXM 175 177 HP FWA POWERSHIFT one owner ........................................................................... POA
CASE MX 120 A/C CAB 120 HP FWA ........................................................................................................ POA
MASSEY FERGUSON 6265 105hp FWA A/C Cab Burder Loader ............................................................. POA
MF390 85HP Loader 4WD Shuttle Shift .................................................................................................. POA
DEUTZ AGROTRON 90 MK3 90HP FWA A/C cab and F.E.Loader ............................................................... POA
MF590 80HP, A/C cab, engine rebuilt ...................................................................................................... POA
ISEKI SX 75 A/C cab, FWA, linkage one owner ........................................................................................ POA
MF 394-4 Orchard Tractor, 80HP, Konig A/C cab ..................................................................................... POA
INTER 484 ROPS frame, 2WD, remotes .................................................................................................. POA
DAVID BROWN 880 with F/E loader ........................................................................................................ POA
MASSEY FERGUSON 6150 95 HP A/C Cab Front end loader ................................. Going through workshop
MASSEY FERGUSON 3070 95 HP A/C Cab Front end loader ................................... Going through workshop
WINDROWERS
NEW HOLLAND SP H8080 15FT ROTARY MOWER CONDITIONER FRONT AND 25FT DRAPER ..........................
FRONT ON A TRAILER.............................................................................................................................. POA
MASSEY FERGUSON 30 FOOT 5200 TRIPLE DELIVERY DRAPER FRONT ................................................... POA
MOWER CONDITIONER
MASSEY FERGUSON 1345 12 FT STEEL ROLLERS CENTRE SWING ......................................................... POA
TAARUP 4236CT 3.5 MTR tyne conditioner late model one owner .......................................................... POA
KUHN 350G 3.5 MTR steel flail conditioner, swivel hitch ........................................................................ POA
TAARUP 4036 3.5 MTR flail mower conditioner one owner ..................................................................... POA
VICON EXTRA 632T 3 mtr fiail mower conditioner linkage mount ........................................................... POA
TAARUP 307 3.2 MTR flail mower conditioner......................................................................................... POA
MOWERS
TAARUP 2832F 3.2MT FRONT MOUNT DISC MOWER late model ......................................................... ...POA
CLAAS 260 DISCO disc mower going through workshop ....................................................................... POA
LELY 320 3.2MT disc mower one owner ................................................................................................. POA
ROUND BALER
MCHALE V640 5X4 ROTOR FEED one owner baler going through workshop ........................................... POA
WELGER 445 5X4 ROTOR FEED AND KNIVES LATE MODEL BALER ........................................................... POA
WELGER 520 6X4 ROTOR FEED AND KNIVES GOOD BALER ...................................................................... POA
CASE 528 5X4 rotor feed net wrap and knives........................................................................................ POA
CASE 628 6X4 rotor feed net wrap .......................................................................................................... POA
JOHN DEERE 535 6X5 baler has net ....................................................................................................... POA
CLAAS 280 6x4 roto feed string and net ................................................................................................ POA
JOHN DEERE 467 6x4 Round Baler roto feed and net ............................................................................ POA
CLAAS 280, 6x4 roto cut, string and net ................................................................................................. POA
GRASSLANDS, 6x4 Silage Baler, wide pick up ........................................................................................ POA
JD 590, 6x4 Round Baler, going through workshop ............................................................................... POA
HAY RAKES
MASSEY FERGUSON 10MT twin rotor rotary rake ........................................................................ COMING IN
GENDORE 6500 6.5 twin rotor rotary rake ..............................................................................................POA
KUHN GA 7301 7.5 mt twin rotor rotary rake .......................................................................................... POA
SQUARE BALERS
MASSEY FERGUSON 2170 3x4 rotor cutter tandem axle .............................................................. COMING IN
MASSEY FERGUSON 190 4X4 going through workshop has 2190 crank and reduced height chamber. .........POA
NEW HOLLAND 1210 3x4 Square Bale ................................................................................................... POA
MF 185 3x3 Square Baler ....................................................................................................................... POA
CASE 8580, 4x4 Square Baler ................................................................................................................ POA
CASE 8570 3x3 Square Baler ................................................................................................................. POA
SPREADERS
AMAZONE 1500 LINKAGE MOUNT twin spinner ....................................................................................... POA
SEEDERS
DUNCAN RENOVATOR 19 RUN DUAL BOX WITH COULTERS FULLY SERVICED ........................................... POA
FFM-TV-NMAI-5012666-A
HORWOOD BAGSHAW SCARIBAR 350 Suit Rear Tow Seeder AGMASTER
Press Wheels. 42' Wide. 15 Inch, Extra Original Tines Available. Originally
36' with 7.5" Tine Spacing. S45. TA937451. $29,000
GASON 1830RT 2 BIN GASON 1830 Rear Tow 2 Bin 4 Outlet Dual Front
Castor Wheels. S27. TA598908.
$33,000 Incl.Gst
HARVESTING
Gleaner R60 30 Front $20,000
TRUCKS
Mercedes Benz 2222
prime mover with 30 Ft flat top trailer
converted to tipper $20,000
Mercedes Benz 1418
single drive with page and page
pusher axle $10,000
A RANGE OF NEW 8" AND 10"
GRAIN LINE AUGERS AVAILABLE
FFM-TV-M-5114257-A

TradeFarmMachinery.com.au 83
HAYMOWERS SLASHERS MULCHERS
Sold & Serviced By
HARDI
Reduce your cutting time!
Call us on 08 8584 7609 or visit
www.loxtonengineering.com.au
16 Starcevich Road, Box 18 LOXTON SA 5333. Fax 08 8584 6380
A/H: (03) 5382 4234
Fax: (03) 5381 0380
Mobile: 0418 810 370
87-89 Dimboola Road,
HORSHAM, Vic 3402
ABN 47 1934 965 94
Tel: (03) 5381 0370
TOP MARK MACHINERY
A.C.N. 079 212 025 A.B.N. 84 079 212 025
8 Deviation Road, Naracoorte SA 5271
Ph (08) 8762 0955 Fax (08) 8762 0966
Email: topmarksales@rbm.com.au
ALL PRICES INCLUDE GST
KUBOTA M7151
PREMIUM
2019, M7151 860Hrs.
3FY0306. TA1081921.
$132,000
Pivots Engineered for Australia
D2C Direct to Consumer – new and lean online
marketing methods – PIA are the national
accredited agents for RKD of Spain. Service agents
are strategically located around the nation; spares
are ex warehouse Sydney.
Buy Direct and Bank the Difference.
Call us today for a chat, followed by obligation free
design and quotation.
0457 326 106
GASON 1850 RT2
Gason 1850 RT2 air seeder c/w
small seeds pasture planter in
excellent conditions.
HM808. TA1061639.
$33,000
NEW HOLLAND
BB960A CROP CUTTER
2009, 56,000 bales.
294548005. TA1025254.
$38,500
JOHN DEERE 8360R
2012, Duals all round.
RG6090R21665.
TA1025239.
$143,000
WELGER RP 520
MASTER
2004, Good Condition.
New Tyres. ST183329.
TA1034407.
$13,200
2c Gore Street, Naracoorte, S.A. 5271
admin@pia-online.com.au
www.pia-online.com.au
SELL YOUR
FARM
MACHINERY
GASON 1820 1820 RT2
rear tow air seeder and Case level
lift cultivator. HM798. TA1055593.
$19,800
FENDT 818
2003, Vario 50Kph
front suspension.
00850735. TA1025243.
$77,000
MASSEY FERGUSON
2270XDT (TANDEM
AXLE)
2016, 2270XD baler
tandem axle with
Gazeeka 51, 860 bales
worked.
AGCM2270XGHB17231.
TA1074324.
$99,000
VISIT THE WEBSITE
OR CALL 1300 362 272
FLEXI COIL 1610 PLUS BIN
1610 'Plus' rear tow air seeder.
HM784. TA997992.
$11,000
For our full range of equipment please visit:
hicks-machinery.tradefarmmachinery.com.au
FFM-TV-5013318-A
CLAAS AXION 820
2014, Good Condition.
285503. TA1025253.
$82,500
topmarkmachinery.ihub.com.au
FFM-TV-5013246-A

4/3/20, 2:48 pm
Page 1 of 1
4/3/20, 2:48 pm
Page 1 of 1
SEARCH
NEW AND USED TRACTORS FOR SALE IN
AUSTRALIA BAUER TRADER MEDIA
Find new and used Tractors for sale with Farms & Farm Machinery
magazine
NEXT
SEARCH
Page 1 of 188 (1,875 results)
Sort by Premium Ads
list map
NEW AND USED TRACTORS FOR SALE IN
AUSTRALIA
Find new and used Tractors for GET sale ALERTS
with Farms & Farm Machinery
magazine
CASE IH MAXXFARM 25 TRACTOR NEXT
$19,750
Page 1 of 188 (1,875 results)
Sort by Premium Ads
list map
GET ALERTS
CASE IH MAXXFARM 25 TRACTOR
$19,750
Mclaren Vale, SA
Tractors / Tractors / 0-40hp ! CALL 08 7007 6847
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD
FEL: YES Rated Engine SAVE Power - ITEM hp: 28
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380
hours indicated, with books, approximately 28 horsepower, AS NEW *price
includes gst
EMAIL SELLER
Mclaren Vale, SA
KUBOTA 8540
! CALL 08 7007 6847
$22,000
SAVE ITEM
EMAIL SELLER
KUBOTA 8540
$22,000
BAUER TRADER MEDIA
Tractors / Tractors / 0-40hp
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD
FEL: YES Rated Engine Power - hp: 28
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380
hours indicated, with books, approximately 28 horsepower, AS NEW *price
includes gst
Tractors / Tractors / 40-100hp
RefCode: TA994405 Class: 40-100hp Drive Type: FWA
Number Cylinders/cc: 4 Rated Engine Power - hp: 85
Usage Hours: 5,800
Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives
very well. Xgoverment . Inspection most welcome
Stonyford, VIC
>> TESTED
CASE IH 695XL. 70hp, Cabin, Challenge 349E
front end loader + more • NSW 0429 467 147
Serafin Machinery brings Czech manufacturer
Farmet’s range of deep and disc cultivators to
the local market >> Page 14
2016 GVM Mako. Spra coupe, 2vm boom,
1500L tank. • NSW 0488 442 372
SPRAYERS
8 PAGE SPECIAL FEATURE
Issue 382 > $7.95 > On sale 27/02/20
$24,750 $160,000
$199,980 $50,000
2018 New Holland T7-260. 220hp, L4500
loader + much more • VIC 0402 851 544
items for sale
in print & online
2017 Kioti RX8030SP. ROPS, Loader & 4in1,
had only light work • QLD 0437 113 771
4x4s now for sale!
84 TradeFarmMachinery.com.au
SECONDHAND
MACHINES IN STOCK
08 8821 1188
FARM MACHINERY FOR ALL SEASONS
CONTACT
Alex East 0439 881 355
Phillip Rowntree 0428 859 027
Gary Kotz 0427 868 191
Colin Adams 0429 941 331
JOHN DEERE 690
2012, Separator Hours - 1881
3 Speed Transmission
Tyres- Rear - 750/65R 26 90%
Tyres - Front 650/85R 38 90%
Straw Chopper
Includes 45' Macdon FD 70 Flex
Draper
Upper Cross Auger
Universal Pick up Reel. 102703.
TA1089849.
$327,800
MASSEY FERGUSON HESSTON
9635
2008, 2504 Engine Hours
6.6L Agco SISU 190Hp Engine
2 Range Hydrostatic Transmission
9190 Razor Bar Front
16m cutting width
Single Herringbone steel on steel
conditioner
With Front Trailer with brakes. 102650.
TA1054173.
$110,000
GLEANER S98
2017 Build
579 Engine Hours
377 Sep Hours
9.8L Engine
471HP
Titan Terminal, tidy
maintained machine. C71364.
TA970992.
$385,000 Inc GST
CLAAS LEXION 760
2017, Engine Hours- 1315
Separator Hours - 940
Perkins Engine T3, Dynamic Cooling
11,500L Grain Tank, 4 XL Auger,
Quantimeter
Auto Crop Flow, Special Cut Spreader
Macdon FD 75 W/Trailer
S374. TA1076530.
$398,200
AMAZONE ZAM3000 ULTRA
PROFIS
2013, in 2- 600l, Ext(4200L)
Manuel Hopper Cover
1000 RPM PTO
Amatron & Controller
Fertilizer weight Cels
36M Spread
Hopper Screens
Road Light. 102720. TA1089888.
$24,200
MILLER NITRO 4315 SP
SPRAYER
2009, 315HP Mercedes Benz Engine
4128 Engine Hours
30m Mono Boom with Triple Nozzles
on 250mm spacings.
6100 Tank.
Steer ready, 3 Sensor Raven Auto High
Grani Pot, Banjo Direct Fresh water fill
pump.. 102713. TA1082357.
$115,500
CASE IH 9230
Separator Hours- 1750
571hp
Steer Ready
Grain Tank 12,300l
Case 2012 Flex Draper 2162 45'
Stabiliser Wheels
Ellbourn Trailer Included.
102686-102687. TA1089884.
$448,800
JOHN DEERE S680
2016, Engine Hours- 1550
Separator Hours -1200
Premium Cab - Led Lighting
26 ft Auger, 14,100L Grain Tank
Fine Cut Power Cast
John Deere Front
40' Flex Draper with Kelly Comb Trailer
Includes AWS Air Bar. 102696 102697.
TA1086655.
$462,000
CLAAS 770
2016, 1500 Separator Hours
585hp, T4 Dynmaic, Cooling
Cemos Auto- Sep - Clean
Cruise Pilot
Special Cut Spreader
3XL Auger- 13,500l Grain Tank
Auto Contour Feeder Housing
High End Led Lights
SEED TERMINATOR. 102702.
TA1089847.
$462,000
USED HEADERS:
New Holland CR9090 2013 Combine .......................... $302,500
John Deere S690 w- 45” front ................................... $327,800
Case IH 9230 .............................................................. $264,000
Gleaner R62 .................................................................. $27,500
Case IH 7240 ............................................................. $352,000
John Deere S680 ........................................................ $308,000
USED BOOMSPRAYS:
Miller Nitro 4315 ........................................................ $115,500
USED FRONTS:
Case IH Rake up front ................................................... $22,000
Case IH 2162 front ........................................................ $61,050
John Deere 640 FD ....................................................... $93,500
SEEDING:
Bourgault 6350 Streamliner 2016 ................................. $88,000
Bourgault 8810 Cultivator 2011 .................................... $44,000
MAKE US AN OFFER WE CANT REFUSE!
PRICES ARE INC GST
CONDITIONS APPLY
Website: www.gjeast.com.au | Email: sales@gjeast.com.au | 4-8 Goldsworthy Street - Kadina
FFM-HH-5012311-C
Powered by
RESEARCH • COMPARE • BUY • SELL
AUSTRALIA’S #1
FARM MACHINERY MARKETPLACE *
BUY
More than 40,000 tractors,
spreaders, harvesters, hay tools,
feeders, sprayers, trailers, and
attachments, and other parts and
accessories currently listed for sale
SELL
Unlimited
stock listings on
TradeFarmMachinery.com.au
for just
$360 per month
Tractors, farm machinery & materials handling equipment for sale
Four High, Two Tonne
Tobroco Giant 6004 Loader
Off the Chain
Hustler’s Chainless LX104 Bale Feeder
Fully Charged
Ram 1500 Laramie V6 Ecodiesel
www.TradeFarmMachinery.com.au
,!3BD0A6-aaejdg!:K;N
Czech
44,480+
MATE
Trucks, utes and
8,340+
* Based on stock items for sale as at March 2020

TradeFarmMachinery.com.au 85
WANTED CONNOR SHEA
SEEDERS, ANY CONDITION.
LANDACO BELT SPREADER 2-3 ton.
S2013. TA1086282. POA
SAME FRUTTETO 85hp Burder Forklift
& Hyd Bucket. S1999. TA1082325.
POA
SUPERIOR 7’6” SLASHER 3PL. S2018.
TA1086285. POA
INTERNATIONAL 21 TYNE SCARIFIER
.. S2004. TA1082331. POA
JARRETT 8’ GRADER BLADE Heavy
Duty, 3PL. S2020. TA1086287. POA
COIL PACKER ROLLER 16’. S2027.
TA1086292. POA
AGROW PLOUGH 14 TYNE 3PL
Subsoiling Plough. S1987. TA1077614.
POA
DUNCAN 24 RUN DOUBLE DISC
SEEDER with 3 boxes. S1948.
TA1059644. POA
TEAGLE SPIROMIX 3PL, Cement Mixer.
S2014. TA1086283. POA
PAGE 9’ SLASHER LINKAGE Heavy
Duty. S2008. TA1082332. POA
AERATOR 10’ SPLIT SHAFT 3 Blade,
Trailing or Linkage. S2026. TA1086290.
POA
THORNTON FEEDOUT CART 1 1/2
ton. S1967. TA1070161. POA
HARDI 400LTR BOOMSPRAY 3PL .. S1870.
TA1025089. POA
FORD NAPIER BLUELINE 32 DISC
Heavy duty plough. S1980. TA1077606.
POA
JETSTREAM 5 IN 1 GROUPER Honda
motor. S1984. TA1077611. POA
CONNOR SHEA 9’ DISC SEEDER ..
S2001. TA1082327. POA
VICON PS402 PENDULUM SPREADER
3PL. S2029. TA1086297. POA
NEW HOLLAND 352 HAMMERMILL
MIXER .. S1919. TA1046903. POA
AITCHISON SEEDERMATIC 9’ trailing or
linkage. S1968. TA1070162. POA
ROVIC 2 TON BELT SPREADER ..
S2028. TA1086294. POA
DUNMORE ROCK PICKER .. S1959.
TA1063072. POA
WALLACE 5 TYNE SUBSOIL PLOUGH
3PL Coulters. S1996. TA1082322. POA
ARROW LAMB MARKING CRADLE 4
Rotary. S2002. TA1082328. POA
BERENDS 3PL GROUND BREAKER
RIPPER SUBSOILER 4 TYNE .. S1983.
TA1077609. POA
AGRIMASTER 10’ MULCHER 3PL with
Depth Wheels. S2012. TA1082335. POA
3PL ROCK
RAKES 6 TO 10
FT WINDROWS,
RAKES & LEVELS,
6’, 8’ & 10’.
TA307516.
POA
GRIZZLY WHEELED OFFSET PLOUGH
36 DISC New discs and bearings. S1978.
TA1077604. POA
ROTATING WEED WIPERS 9’6” COVER
SUIT QUAD, UTE OR TRACTOR.
TA449307. POA
PORTABLE SHEEP YARDS .. S1979.
TA1077605. POA
CHRISGROW 10’ 3PL SLASHER ..
S1998. TA1082323. POA
COMBINE AND SEEDERS
Shea 5' & 7', 3PL disc seeder
Seedling planter (Ellis) rotary
6' & 8' roller seeders
9' Connor Shea disc seeder trail
C seeders
Ellis and Sons 4 row seeders
Inter 24 run combine
MF 55 12 run combine
7' Ezy-Sow seeders 3PL $2,900
HAY EQUIPMENT
Small square balers: NH 317, NH 275, NH 69, MF 12.
Claas
Mower con - in stock
MF 3PL roller bar
KINGPACKER ROLLERS 8’ TO 15’.
S1753. TA958959. POA
ACRES OF NEW & USED MACHINERY & SPARES
NH 339 double chop forage harvester
Hay Feed out buggy (Pearce)
Baler, rakes, mower, handlers, elevators and spare parts.
Rakes, finger wheeeled 3PL, 3PL roller bar, tedder &
rotary.
MISCELLANEOUS
Buttsworth scoops 1 yd
3 tyne Moorehouse ripper, 3PL.
Harrows cover, diamond, pasture & stump jump.
Bait layes
2, 3 & 5 tine rippers.
Harland irrigation pump, PTO.
Daken 3PL forklift
Piston pump 5" x 4" (DGM)
3PL stick rakes 6' to 10' new & sh
NOBILI 9’ 3PL MULCHER High Body.
S1982. TA1077608. POA
Forage harvesters & carts, NH Gehl & Tiki
Rollers (Cambridge), culti packers, stones & tyre)
7' to 28'.
PTO hammermills, roller mills, grain gristers. From $595
3PL, 5-9 tine trail, 8-14 tine chisel ploughs From $795
Irrigation pipes, pumps & motors, travelling irrigators.
Scoops, 3PL, silt blades, carryalls and rippers.
2nd hand tractor tyres, belt pulleys, PTO From $195
2nd hand new tines Augers, 50' x 6" & 8", pencil 14' x 4"
new and 2nd hand.
Harrows all types From $45
Boom sprays, 3PL, Hardi and Silvan, 400 & 600ltr.
Power Harrows 3PL Lely 15'
Crump (Kurrajong 1000) 1 tonne trailing
Manure-lime & super spreaders Super spreaders ground
ROCK-HOPPA DIRECT SEEDER 12
RUN ROCK HOPPER, EXTRA HEAVY
DUTY. S1966. TA1063077. POA
drive, ½ - 4.5 tonne.
9' Roto wiper, new & secondhand
Vicon spreaders 10 to 30 bag,
Hardi 1200 ltr boomspray trail, foam & PTO.
OFFSET/DISC PLOUGHS
Grizzly 20 424 disc
Gibbons Rawlings 28 plate
SCARIFIERS & TILLERS
Ferguson scarifiers 3PL
19 tyne Bagshaw scarifier towable
SHEEP AND CATTLE
Feeders (hay & grain)
Cattle Scales
Feedout bins and trailers.
COLBURN SUBSOIL PLOUGH 7 Tyne,
3PL with Coulters. S2015. TA1086284.
POA
Shearing plants, grinders, lamb cradles, handlers,
wool pressers, bail heads, crushes, wool tables, hyd
woolpress.
SLASHERS
8’ slasher 3PL (superior)
2.3 high body Nobili mulcher
TRAILERS
HYD Tipping 10' x 6'
Freighter 4 wheel trailer
Tipping trailer 8' x 6' From $975
TRACTORS
Ford 3000, 45hp, 3PL, P-Steer. FE Loader.
Fergie TEA20 petrol
FFM-FP-5013027-TS-400
**DELIVERY ARRANGED AUSTRALIA WIDE** SPARE PARTS: NEW AND S.H. AVAILABLE : FOR MOST EQUIPMENT
WANTED: Tractors and Machinery, any condition, anywhere Call Selwyn on (02) 6227 7227
Hume Highway, Bookham (YASS) 2582 • OPEN 8 TO 5 MON-FRI

Are Media publishes across six key platforms to
maximise audience reach, engagement and response.

For more information, visit
industry.aremedia.com.au

PRIVATE Advertising
www.tradefarmmachinery.com.au/sell 1300 362 272
MAKING YOUR LIFE A BREEZE
smallaire.com.au
Manufacturers of Air Movement Products since 1974
Grain drying systems
Grain Aeration Systems
High Pressure Blowers
Stirring/Wall & Roof Fans
Airseeder components
Commercial/Domestic AC systems
Ph: (03) 5382 5688
170 Golf Course Rd, Horsham VIC
Ph: 0418 997 646 4/70 Strickland Street, South Perth WA
FFM-SH-5032334-TS-361
SELL YOUR FARM MACHINERY
EMED EM0.8
2021, power up & on with earth moving equipment direct
private & commercial excavating machines, solutions and
accessories. Looking for the right excavator for the right
price that makes life and work easier and faster?, NA. VIC.
DIY1090857. 1300 020 317. $15,290
TRADEFARMMACHINERY.COM.AU/SELL
OR CALL 1300 362 272
NEW HOLLAND TS100
2004, Great second tractor, excellent Condition.
Ready to work, comes with loader and hay forks, No. VIC.
DIY1090743. 0418 286 871. $40,000
SELL YOUR
FARM
MACHINERY
SELL YOUR
FARM
MACHINERY
VISIT THE WEBSITE
OR CALL 1300 362 272
NEW HOLLAND TT 4.75 2017, 75
hp, only done 134 hours, rops and
canopy, 4wd, 12 x 12 gears, shuttle
shift, loader with 4 in 1 bucket,
pallet forks and hay tines, 2 tonne
rear lift, excellent condition,
195751n. NSW. DIY1088812.
0457 352 877. $47,000
AMAZONE KG 3500 2008, Amazone
KG Rotary Cultivator, None. SA.
DIY1090342. 0412 422 411. $11,000
FORDSON 3000 1 owner very clean
tractor diesel 47hp very versatile, ..
VIC. DIY1089874. 0400 212 170.
$6,950
HATZENBICHLER 6.0 M HEAVY
VERTIKATOR 2020, Hatzenbichler
6m Air Seeder, Ben Lomond. NSW.
DIY1089755. 0458 248 007. $44,000
VISIT THE WEBSITE
OR CALL 1300 362 272
JOHN DEERE 2500A 2005, Great
Mower, services up-to-date. Selling
due to upgrade. Feel free to make
an offer, *TC25AD030502. SA.
DIY1087075. 0428 833 935.
$10,000 ONO
HOWARD NUGGET 150 36 " CUT
2015, Gearbox for Howard Nugget
150 Slasher, TA 1050121. VIC.
DIY1087656. 0438 006 480. $300 300
FAMSON BELT SHIFTER Used.
Approx 12.3 mtrs length. Belt Width
approx 370 mm. Self Propelled with
hydraulics driving belt, wheels and
lift back and front powered by a
Hatz diesel motor. Electric Start,
Hatz. NSW. DIY1089153.
0427 566 639. $16,500
KUBOTA BX2360 2019, TRACTOR
Diesel 4WD, 36 Hrs, 60" Mower,
3-Point Hitch, PTO, 23 HP, With
Land Pride Quick-Hitch & 60" Box
Scraper. Included are Accessory
Hydraulics for say running future
Loader or Snow Blower, Original
Manuals for Tractor and
Implements, New Battery, spare set
of Mower Blades, The Shanks for
Box Scraper and Spare Filters,
34452. NSW. DIY1087220.
03 5273 1319. $7,950
MASSEY FERGUSON TED as new
fully restored many extras original
books and manual, .. VIC.
DIY1089871. 0400 212 170. $6,950
NAANDANJAIN AQUA SMART 2002
2016, Pressure Compensated
Under Tree Micro Sprinkler, N/A.
QLD. DIY1084403. 0413 179 133. $1
SELL YOUR FARM
MACHINERY
VISIT THE WEBSITE OR CALL 1300 362 272

Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$275,000 !
Scan to view:
DEALS
Just
$60,500 !
Scan to view:
2012 John Deere S680 + 640D
or call
08 6336 7780
2760 engine hrs, 2010 Sep hrs. 800/70R38 front singles & 23.1R26 rears - powerfold lids.
PowerCast tailboard, iT4 engine.
2009 Midwest 45’
Platform size: 45 feet. Platform kind: Draper. In good condition.
or call
08 6336 7780
Just
$68,750 !
Scan to view:
Just
$330,000 !
Scan to view:
2007 Bourget 8810
or call
08 6336 7780
Seed Bar, double spring, 60’ @ 10” spacings, 450lb spring trips, set up as TBH, single shoot
hose kit, Bourgault Gang Style press wheels, no points or boots fitted, Good Cond.
2014 John Deere S680 + 640D
or call
08 6336 7780
2014 John Deere S680 Combine Harvester 640D platform (no trailer ). 2440 engine hrs, 1968
sep hrs, front duals, premium cab.
Just
$181,500 !
Scan to view:
Just
$99,000 !
Scan to view:
2013 John Deere S680
or call
08 6336 7780
Combine harvester with 2845 engine hrs, 2282 sep hrs. ProDrive transmission. Small grains
combination concaves - 520 duals (30%) -23.1r26 steer tyres (40%).
2006 John Deere 9860 STS
or call
08 6336 7780
Combine harvester + 40’ MW platform. 3219 engine hrs, 2426 sep hrs. 800/70R38 front
singles, 600/65R28 rear tyres. HUR 6.9M unload Auger - HID lights, service lights, chopper.
Just
$99,000 !
Scan to view:
Just
$214,500 !
Scan to view:
2012 John Deere S670
or call
08 6336 7780
Combine harvester. 3680 eng hrs, 3130 sep hrs, push button 3 speed transmission. 520 duals,
separator only, tier 2 engine, prem cab. 6.9m unloading Auger. Rust protection.
2013 John Deere S680 + 640D
or call
08 6336 7780
Combine harvester + 640D Platform - singles - PowerCast chopper - yield monitor -
800/70R38 fronts - 620/75R26 rears.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 89

DEALS
Just
$88,000 !
Scan to view:
Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$99,000 !
Scan to view:
2006 John Deere 9860 STS
or call
08 6336 7780
Combine harvester + 40’ MW platform - 3219 engine hrs, 2426 sep hrs - 800/70R38 front
singles - 600/65R28 rear tyres - HUR 6.9M unload Auger.
2010 John Deere 9670 STS
or call
08 6336 7780
with 640D platform. Well main machine, 4250 engine hrs, 3435 separator hrs, Greenstar ready
chopper big top, 3 speed manual shift trans, 900 singles 18-4 R26 steer tyres.
Just
$462,000 !
Scan to view:
Just
$154,000 !
Scan to view:
2015 John Deere S690 Combine Harvester
or call
08 6336 7780
†With 640D Platform, singles, 2WD, Yield Monitor, Contour Master (Lateral Tilt Feederhouse),
PowerCast Tailboard, Power Folding Bin Extension.
2012 John Deere S660
or call
08 6336 7780
Combine harvester - 26ft unload Auger - 900/60R32 front tyres - 600/65R28 rear tyres - HID
Lights - 7” touch command centre display.
Just
$132,000 !
Scan to view:
Just
$198,000 !
Scan to view:
2014 Bourgault 3320-76
or call
08 6336 7780
2014 Bourgault Paralink 3320-PHD Air Seeder Bar - Factory 76’ been converted to 80’
2013 Case 4430
or call
08 6336 7780
4300 engine hrs, 120’ boom, 6000L tank, 380 tyres, excellent condition, trimble autosteer, Pro
700 Display available July 2021.
Just
$88,000 !
Scan to view:
Just
$209,000 !
Scan to view:
2015 Bourgault 3320
or call
08 6336 7780
40’ @ 12” Spacings, 40 Tynes, Root Boot, Liquid Ready, Double shoot, 12.2 Metre Working
Width. Fitted with High Floatation Kit. Location - Geraldton, WA
2012 John Deere S680 + 640D
or call
08 6336 7780
With top Auger & trailer - 2WD - singles - chopper - iT4 13.5L engine - 7.9m long unloading
Auger - HID lights - power folding lids - 2724 engine hours.
90 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$423,500 !
Scan to view:
DEALS
Just
$396,000 !
Scan to view:
2016 Claas Lexion 760TT
or call
07 3171 1142
1012 chopper hrs, tier 4 Perkins, dynamic cooling, APS threshing system, auto contour, 3XL
unload auger, auto crop flow, C-MOTION control lever, central lubrication, autopilot.
2016 Claas Lexion 760TT
or call
07 3171 1142
1012 chopper hours, tier 4 Perkins, dynamic cooling, APS threshing system, auto contour, 3XL
unload auger, auto crop flow, C-MOTION control lever, central lubrication.
Just
$385,000 !
Scan to view:
Just
$143,000 !
Scan to view:
2014 Claas Lexion 760
or call
07 3171 1142
41ft Midwest front & trailers. 1,330 engine hrs & 902 effective working hrs, 635mm Terra Trac
on 3m centres, Cat C13 engine, auto contour for Vario front, 11,500L grain tank.
2014 Deutz-Fahr Agrotron 6210
or call
07 3171 1142
lightly used tractor, 1,344hrs, 210hp cab tractor, 4WD, 540/1000 PTO, 4 remotes, hook end
linkage, front weight pack, aircon, good rubber, paint & panels in excellent Cond.
Just $880 !
Scan to view:
Just
$6,000 !
Scan to view:
Olympic 11.2-24
New Olympic 11.2 -24 tyres new old Stock
or call
03 9116 6686
Polaris ACE 325
checked over and serviced in our workshop with 764hrs/8294km.
or call
03 9116 6686
Just
$309,900 !
Scan to view:
Just
$368,500 !
Scan to view:
2012 Class Lexion 75-TT
2wd or 4wd and a dual overhead cam motor.
or call
07 3171 1142
2013 Claas Lexion 760
or call
07 3171 1142
With world renowned CLAAS Terratrac, and at only 1,200 sep hours, and with nothing more to
spend, this machine has been inspected and repaired by qualified CLAAS technicians.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 91

DEALS
Just
$9,900 !
Scan to view:
Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just $3,999 !
Scan to view:
Vermeer 504L
Round baler. Net wrap. Good condition. Did 80 bales last week with no issues.
or call
03 9116 6686
Kubota KD5500
Diesel generator. 5.5 KVA generator, OC95 diesel engine. 5.5lt fuel tank.
or call
03 9116 6686
Just
$3,500 !
Scan to view:
Just
$35,995 !
Scan to view:
Cub Cadet 2042
or call
03 9116 6686
Mower in good working order, has been serviced and checked in our workshop. Twin cam
19hp Kohler motor with 42inch deck.
Polaris RZR XP Turbo EPS
or call
03 9116 6686
925cc 168HP turbocharged, twin cylinder, Fox podium shocks, 32” tyres is just a few features
this off road weapon has. Comes with $2000 free accessories of your choice.
Just
$55,000 !
Scan to view:
Just
$92,400 !
Scan to view:
2018 Amazone Xtender Seed Hopper
or call
03 8547 8799
4200L hopper with 50/50 split, transport wheels, Comfort Pack with Twin Terminal 3.0 for
easy calibration, Cat III tractor and implement mount, radar speed sensor.
2018 Amazone ED 6000
or call
03 8547 8799
ED6000-2 Precision Planter. 12 rows with 50cm spacing. Contour coulter units with Profi Hyds
and full ISOBUS control. 7 singling disc options to suit a wide range of seeds.
Just
$93,500 !
Scan to view:
Just
$15,400 !
Scan to view:
2017 Amazone Certos 5001
or call
03 8547 8799
Heavy Disc Cult/Speed Tiller, 5m working width, Cat III Linkage, 660mm large scalloped discs,
650mm Matrix profile wedge ring roller, crushboards, side levelling discs.
2006 Claas Liner 680
twin rotor, marsh rings fitted, has been through the workshop and is farm ready.
or call
03 8547 8799
92 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$108,900 !
Scan to view:
DEALS
Just
$63,800 !
Scan to view:
2018 John Deere 6110
or call
08 7007 6556
Row crop tyres. Front - 320/90R32 Rear - 340/90R48. Front weights. Selling on behalf of
customer.
2009 Goldacres 6536EF Prairie
36m, twin line, induction hopper, raven controller, hyd pump.
or call
08 7007 6556
Just
$48,400 !
Scan to view:
Just
$286,000 !
Scan to view:
Hardi 7030 Commander
or call
08 7007 6556
7000 litre with 30 meter boom. boom has been through workshop recently, hydraulic
suspension, four sections and hydraulic driven pump.
2017 Hardi 5500 Saritor
or call
08 7007 6556
42.5M Pommier air boom on 250MM nozzle spacing with 3 way nozzle bodies, 2750 hrs,
480/80R50 tyres, Hardi HC9500 monitor and 10 boom sections.
Just
$8,800 !
Scan to view:
Just
$48,400 !
Scan to view:
Maschio Bella 190
190 offset Mulcher, 1.95m wide.
or call
08 7007 6556
Morris Concept 2000
54ft (16.46m) 400lb spring breakout, floating hitch, double fold 9 inch spacings.
or call
08 7007 6556
Just
$203,500 !
Scan to view:
Just
$60,500 !
Scan to view:
2017 Bourgault L7550
New stock clearance program. Bourgault L7550AU air seeder leading 19.
or call
08 7007 6556
Case IH PTX600
or call
08 7007 6556
62’ working width, 9” row spacings, 350Ib breakout, double shoot tow between air kit and
Kelly prickle chain gang modules.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 93

DEALS
Just
$101,200 !
Scan to view:
Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$550,000 !
Scan to view:
2014 Case IH LB434 Baler
or call
02 9064 7288
Standard Roto Feed Baler, 1000 PTO Drive, 6 Stringer, w/ Electric Fans, Case Pro-700 Monitor,
Bale Count 32,708.
2017 Case IH 9240
or call
02 9064 7288
1259 engine and 922 rotor hrs. Single 800/70R38 drive tyres, Pro 700 display with Nav
controller and 372 receiver, folding unload auger, Hyd folding grain tank extensions.
Just
$495,000 !
Scan to view:
Just
$60,500 !
Scan to view:
2016 Case IH 8240 Combine
With 1473 Engine 978 Rotor Hours, 800/70R38 drive tyres, Pro 700 display.
or call
02 9064 7288
2018 Faresin PF 1.11
or call
02 9064 7288
Vertical Mixer, 11 cubic mtr capacity/4,400kg, 540 PTO w/ 2 speed gearbox, 12 volt digital
scales working off 4 load cells, horizontal unload conveyor delivering left and right.
Just
$48,345 !
Scan to view:
Just
$80,000 !
Scan to view:
or call
02 9064 7288
2020 Aitchison 4124CT Direct Drill Combine
24 run @ 5spacing, front manually adjusted coulters, hyd rear transport wheels & tow hitch,
540L seed & 540L fert Capacity, 3m sowing width.
2019 Croplands Weedit Linkage Sprayer
or call
02 9064 7288
12mtr Operating Width, End Tow Transport Hitch w/ Hyd Drop down Wheels, Folding Wings for
Narrower Gate Access, 600ltr Main Tank & Flush Tank.
Just
$50,600 !
Scan to view:
Just $4,730 !
Scan to view:
2021 Unia Ares 3.5
or call
02 9064 7288
Multidisc trailing tiller, drawbar unit, 3.5m cutting width, machine weight of 3880kg, hyd
drawbar pitch control, hyd rear cage roller control, hyd lift, 3 sets of remotes required.
2017 Cosmo Bully UH-60 Rotary Hoe
or call
02 9064 7288
540 PTO drive, 8” friction clutch. 7 rotor flanges w/6 curved blades on each rotor suit 50/75hp
tractor 1680mm cutting width.
94 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$108,900 !
Scan to view:
DEALS
Just
$132,000 !
Scan to view:
2017 John Deere 640X
540 PTO drive shaft, auger hopper chute.
or call
03 8547 8800
2016 Krone BP 1290HDP
or call
03 8547 8800
XC High Speed 6 String Baler, 41,200 Bales, X-Cut Chopper, Bale scales, Tandem Axle, Monitor,
Grevillia Inoculant applicator. Good Cond.
Just
$148,500 !
Scan to view:
Just
$27,500 !
Scan to view:
2004 John Deere 9760STS
or call
03 8547 8800
30.5x32 & 18.4x26 tyres, chopper, 6.6m std unloading auger. Includes John Deere 936D draper
but have choice of fronts available.
John Deere 787 Air Cart
180Bu 2 Bins, Loading Auger, 6 Runs Primary (Max 8).
or call
03 8547 8800
Just
$165,000 !
Scan to view:
Just
$27,500 !
Scan to view:
2004 John Deere 9860 STS
or call
03 8547 8800
Chopper, 6.9m HUR unloading auger, 800/70R38 & 600/65R28 tyres, Greenstar ready, HID
lights. Choice of fronts.
Goldacres Sprayer
or call
03 8547 8800
5000L, 33m sprayer, dual line, CIH, TC, 300L fresh water, FM, Raven controller, 18.4 x 38 tyres,
MG, PTO pump.
Just
$55,000 !
Scan to view:
Just
$352,000 !
Scan to view:
2008 Goldacres 6530
or call
03 8547 8800
6500L 30m dual line, Raven controller, CIH, TC, 400L FW, 20.8x38 tyres, airbags, MG, direct inj
tank, Hyd drive.
2014 John Deere 4940
or call
03 8547 8800
SP Sprayer, 2287 eng hrs, 887 spray hrs, A/T ready, 2630 screen, steel boom excellent Cond,
just arrived.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 95

DEALS
Just
$155,000 !
Scan to view:
Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$135,000 !
Scan to view:
2019 Case IH Puma 165 Tractor
or call
08 7007 6557
FPT turbocharged 6cyl engine, 19F and 6R gears, 40kph powershift trans, 167hp - with boost
204hp, 3x mechanical remotes, 540/1000 PTO, multi-controller armrest, rear 3PL.
2020 Case IH Maxxum 115
or call
08 7007 6557
115CVT, FPT turbo 4cyl engine, 50kph CVT trans, 116hp with boost 144hp, 3x electro hyd
remotes, 540/1000 PTO, multi-controller armrest, rear 3PL, front fenders, bar axle.
Just
$10,990 !
Scan to view:
Just
$30,500 !
Scan to view:
Kubota L2050
or call
08 7007 6557
3 cylinder engine, 25 HP, 2x4 2WD, 3 point-linkage, PTO 540, 2 speed transmission.
2020 Case IH Farmall 25B
or call
08 7007 6557
27hp engine, 3cyl 1.32L, hydrostatic high and low trans, 3PL Cat 1 with lift capacity of 650kg,
540 PTO, turf tyres, Prime-Lift 05C Loader with 4in1 bucket.
Just
$29,700 !
Scan to view:
Just
$37,900 !
Scan to view:
2000 Case IH CX80 Cab Tractor
or call
08 7007 6557
80HP Perkins 4 cyl eng - 10,134 hrs, power shuttle 24x24 trans, (hi and lo with creeper gears),
brand new clutch, 3PL, aircon cabin, PTO, 2 rear remotes.
2020 Case IH Farmall 50B
or call
08 7007 6557
2.5L 4cyl diesel engine 50hp, mechanical trans, 4WD, ROPS, 540 PTO, 3PL 1252kg capacity, one
rear hyd remote, Prime-Lift 15C Loader, 4in1 bucket 1700mm width.
Just
$74,900 !
Scan to view:
Just
$77,900 !
Scan to view:
2020 Case IH Farmall 105C
or call
08 7007 6557
3.4L FPT engine 107 HP. PTO 91 HP. 24 x 24 power shuttle Hi Lo transmission. hydraulic main
pump flow 64LPM. Rear remotes x 2.
2020 Case IH Farmall 105C ROPS Tractor
or call
08 7007 6557
3.4L FPT eng 107hp, PTO 91hp, 24x24 power shuttle hi/lo trans, hyd main pump flow 64 lpm, 2x
rear remotes, Challenge loader program upgrade from standard to a 4in1 bucket.
96 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$79,970 !
Scan to view:
DEALS
Just
$495,000 !
Scan to view:
2018 John Deere 5100M
or call
02 8279 7138
Cab tractor, delivered June 2020, only 26 hrs, with extended powertrain warranty to June
2022, power reverser 32/16 with Hi/Lo, triple rear remotes
2016 John Deere S680
or call
02 8279 7138
Complete with a JD640D on a Coolamon steelworks trailer, 1464 engine hours and 992
separator hours.
Just
$80,001 !
Scan to view:
Just
$27,500 !
Scan to view:
2002 Case IH 2388
or call
02 6171 3039
36ft front with trailer. 2002 model 3731 engine hours (approx.) 2746 separator front tyres
30.5L-32 30% RH / 70% LH rear tyres 14.9-24 10%.
2012 John Deere 13.5L Irrigation Engine
or call
02 6171 3039
6,605 Hrs. 600 HP, engine safeguard controller. Tier III emission engine. Cooling package.
Filtered air intake and exhaust installed.
Just
$85,000 !
Scan to view:
Just
$104,500 !
Scan to view:
2002 Case IH 2388
or call
02 6171 3039
2388 combine 1042 draper 36ft with trailer & 2015 canola front less trailer. 2002 model engine
hours 3592 (approx.), separator hours 2653.
2004 John Deere 9660 STS
or call
02 6171 3191
4WD Rice, 4105 Engine and 3276 Separator hours, Complete with a John Deere 925D on trailer.
Just
$296,450 !
Scan to view:
Just
$42,350 !
Scan to view:
2017 John Deere 8370RT
3490 engine hours, E23 42km/h transmission, 18” tracks, 4 SCV remotes.
or call
02 8279 7035
Vicon RV5116
or call
03 9116 6686
Round Baler. Done 11,196 bales. New chain and drive sprokets. Full workshop service.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 97

DEALS
Just
$33,000 !
Scan to view:
Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$165,000 !
Scan to view:
2018 Krone Swadro TC760
2018 Krone 760p. Twin rotary rake. Presents in very good condition.
or call
03 8373 7241
2017 Krone BP 1290HDP
or call
03 8373 7241
6 string square baler, comes standard with chopper, tandem axle, scales, Gazeeka fitted,
controlled through Isobus
Just
$30,800 !
Scan to view:
Just
$49,500 !
Scan to view:
2010 Pottinger Novacat
or call
03 8373 7241
X8 butterfly mower 8 metre cut electric over hydraulic controls. Can be converted back to
front and rear linkage easily.
2018 Krone ECTC400CRS
or call
03 8373 7241
Steel roller conditioner, centre pivot 2 point linkage hitch. Always shedded and serviced by
Krone trained techs.
Just
$152,900 !
Scan to view:
Just
$46,200 !
Scan to view:
2016 New Holland T7.210 T7 210
or call
03 8373 7241
50K variable transmission. Front axle and cab suspension. PRO700 touch screen display with
NAV and receiver for full auto steer.
Macdon R85 Mower
or call
03 8373 7241
Hydraulic drive, 10 discs, 16 ft working width. 2 blades each with 50% life left. Top hats on both
end discs. Crop lifting Auger. Steel intermeshing rollers.
Just
$68,200 !
Scan to view:
Just
$25,300 !
Scan to view:
2004 Case IH CVX1135
or call
03 8373 7241
Used cab tractor. Quicke loader bucket only. Front axle and cab suspension. 50K fully variable
transmission. 650/65R38 and 540/65R28 tyre package. Electronic remotes.
2003 Silvan 3000L 3021
or call
03 8373 7241
3000 litre sprayer with 21 meter boom, Farmscan rate controller, 16.9 x 34 tyres @ 50%, 3
section. Chemical hopper in good condition.
98 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$8,800 !
Scan to view:
DEALS
Just
$17,600 !
Scan to view:
2008 Kuhn GF8501
2008 Kuhn GF 8501 MH Tedder, 8.5 meter, 8 rotor, digidrive, hydraulic fold.
or call
03 8373 7241
2013 Sulky X36
or call
03 8373 7241
Variable rate linkage spreader. 3,000L capacity, sulky monitor, rear ladder access, wind over
tarp cover. 30m spreading vanes.
Just
$291,500 !
Scan to view:
Just
$55,000 !
Scan to view:
2017 Case IH Magnum 310 CVT
or call
03 8373 7241
Ultimate spec. CVT transmission, 50km speed. 1550 engine hrs, 4 rear electro-hydraulic
remotes with power beyond Cat 4 linkage. Drawbar, dual PTO 540/1000.
2015 Claas Quadrant 3300
or call
03 8373 7241
Claas 3300 square baler. rotor feed, single axle, 6 knotters. Comes with Gazeeka fitted. Will be
serviced and crop ready. Located Ballarat.
Just
$11,000 !
Scan to view:
Just
$28,600 !
Scan to view:
2011 Amazone ZAM3000 Profi
or call
03 8373 7241
Fertilizer spreader. Auto rate control with Amados controller. Has got extensions to 4000 ltr.
2011 Claas Liner 2800
or call
03 8373 7241
Trailing twin rotor swather with steering and hydraulic adjustment raking width from 7.4m up
8.2m.
Just
$105,490 !
Scan to view:
Just POA !
Scan to view:
2009 Excel Stubble Warrior
or call
08 7007 6558
2009 Excel Stubble Warrior, 300mm spacing, simplicity air kit to suit tow between bin, very
good condition, located Bordertown.
JOHN DEERE S690
or call
08 7007 6558
2014 John Deere S690 Header, Gen 3 2630 Display, 3230 Engine Hours & 1881 Rotor Hours,
UHF & CD Player, 620 75R26 Rear Wheels & 520 85R42 Dual Front Wheels.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 99

DEALS
Just
$56,000 !
Scan to view:
Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$33,000 !
Scan to view:
2014 CASE IH 3152
or call
08 7007 6558
40ft draper front, upper cross auger, trailer included, good Cond, located Bordertown
John Deere 630F
Hydra flex front with a Leith trailer
or call
08 7007 6558
Just
$88,000 !
Scan to view:
Just
$56,000 !
Scan to view:
2017 John Deere 30
or call
08 7007 6558
Header front, 30”, expandable platform, approx 500 hrs, finger tine reel, table auger, great for
direct heading canola
2014 Case IH 3152
or call
08 7007 6558
40ft Draper front, upper cross auger, trailer included, good condition, located Bordertown.
Just
$55,000 !
Scan to view:
Just $3,850 !
Scan to view:
2018 Active Machinery AL938LE
650 hours. 150 KW engine power.
or call
08 7007 6558
Hardi 2000L Vineyard Sprayer
Located at Naracoorte, sprayer in average Cond, sold on “as is” basis.
or call
08 7007 6558
Just
$19,800 !
Scan to view:
Just
$198,000 !
Scan to view:
2003 Kuhn FC532G
Side pull Flail Conditioner. Located Naracoorte.
or call
08 7007 6558
2010 John Deere 9770 Harvester
or call
08 7007 6558
TBC 4500 eng hrs, 3000 rotor hrs, pro-drive, contour master, large wire and small wire
concaves, chopper with manual vaneboard, 6.9m auger. Comes with 635D and trailer.
100 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$27,500 !
Scan to view:
DEALS
Just
$62,000 !
Scan to view:
FALC Agila 2500
or call
07 3073 8229
Tough, vers, 120hp g/box, high clearance body and large material intake, will handle pasture
topping or mulching of vegetables, potatoes, orchard and vineyard prunings
Kuhn FC3160TCR
or call
07 3073 8229
New Kuhn FC3160 TCS disc mower conditioner 3.1m cut centre pull with Gyrodine hitch for
sharp turns. Rubber rollers.
Just
$63,000 !
Scan to view:
Just
$63,995 !
Scan to view:
Kuhn FC3560TCR
or call
07 3073 8229
New Kuhn FC3560TCR disc mower conditioner 3.5m cut centre pull, rubber roller conditioner .
Kioti PX9520 ROPS FEL
or call
07 3073 8229
NEW. With loader and 4 in 1 bucket, 95hp Perkins diesel engine, forward / reverse shuttle, 16 x
16 trans, 4WD with diff lock
Just
$27,500 !
Scan to view:
Just
$47,500 !
Scan to view:
Serafin ECO 4500 Folding Slasher
4.5m cutting width, solid filled tyres, 90-130hp, folded transport width 2200mm.
or call
07 3073 8229
Aitchison 4124CT
or call
07 3073 8229
New Aitchison 4124CT direct drill min till combine with seed and fertiliser, coulters and coil
tynes with tungsten points.
Just
$78,995 !
Scan to view:
Just
$104,000 !
Scan to view:
Kioti PX1Q052 Cab
New, 32F x32R power shuttle power shift trans, Loader with 4 in 1 bucket.
or call
07 3073 8229
Strautmann 1801
or call
07 3073 8229
New Strautmann 1801 twin auger mixer. Tandem axle on springs. Electrohydraulic controls.
1200mm elevator on RHS. Stainless steel wear strip on augers. 2 speed gearbox.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 101

DEALS
Just
$71,500 !
Scan to view:
Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$302,500 !
Scan to view:
Massey Ferguson 2170
or call
03 8547 8801
MF 2170 square baler, 2008 model. Gazeeka moisture meter, 46,640 bales, 700/50-22.5 tyres,
16ply-heavy duty, 80%, hydraulic fan on knotters.
Case IH 8230 2012 Model
With 45 Ft Front Axial Flow Combine Harvester, 2965 Rotor Hrs, 3890 Engine Hrs
or call
03 8547 8801
Just
$195,000 !
Scan to view:
Just $7,900 !
Scan to view:
2018 Krone BP1290HDPXHS
or call
03 8547 8801
Big pack baler, 29000 bales, high speed, high density, 6 string baler with cutters. In excellent
Cond, well looked after baler
2018 Can-Am Outlander 450 PRO
or call
03 8547 8801
As traded, 427cc 4 stroke engine, approved roll over protection installed, front mount tool/
accessory box, 4X4, dynamic power steering(DPS), rear tyres like new, 8700km’s
Just
$313,500 !
Scan to view:
Just
$49,500 !
Scan to view:
2015 Case IH 7140
or call
03 8547 8801
Rice Combine Harvester, 1380 rotor hrs, small tube rotor for capacity in rice but also performs
well in cereals, used in cereals, 900/60R32 tyres, 4WD mudhogs.
Croplands Pegasus 6000
or call
03 8547 8801
2008 model Croplands, 6000lt, 30mt with wing lift, 250lpm PTO driven. Located on farm
Mildura.
Just
$24,200 !
Scan to view:
Just
$220,000 !
Scan to view:
Vicon RO-XL 1875
or call
03 8547 8801
3 point linkage spreader. 3 x hopper extensions, 3900L capacity, hopper cover, PTO drive,
wide vane spread kit.
2010 Case IH 7088
or call
03 8547 8801
Axial Flow Combine Harvester, AFX rotor, PRO700, Nav, 3094 rotor hrs, 4073 engine hrs.
Comes with 2009 Case IH 2152 40ft Draper Front with Leith 4 axle trailer.
102 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$75,000 !
Scan to view:
DEALS
Just
$115,000 !
Scan to view:
2004 John Deere 7820
or call
03 6111 4727
MFWD Cabin Row Crop Tractor 8.1L John Deere 185hp Diesel engine 20 forward/ 20 reverse
40km/he PowerQuad transmission. One owner machine
2014 John Deere 6150R
or call
03 6111 4727
Premium Tractor. 150+hp. 6 cylinder engine. 50km/h. infinitely variable trans, triple link front
axle suspension, cabin suspension, auto trak ready, front linkage
Just
$45,000 !
Scan to view:
Just
$12,000 !
Scan to view:
1998 John Deere 7710
or call
03 6111 4727
155hp, 6cyl engine, 20 speed powerquad trans, front axle suspension, 3 sets of rear remotes,
520/85R42 rear tyres, 42085R30 fronts, good order
1990 John Deere 2850
or call
03 6111 4727
2WD cabin tractor, 85hp 4cyl diesel engine, 16 forward 8 reverse transmission, dual rear
remotes, good tyres.
Just
$72,500 !
Scan to view:
Just
$52,500 !
Scan to view:
2000 John Deere 8110
or call
03 6111 4727
Large Frame Row Crop Tractor, 200hp 8.1L engine, rebuilt PowerShift trans, Dual 520/85R42
rear tyres & single 16.9R30 front tyres, 4 rear remotes.
2005 Case MXM130 Tractor
or call
03 6111 4727
MFWD 130 HP Tractor fitted with Case LSX Self levelling Loader, has been through workshop,
Good order, 480/80R42 Rear Tyres, 4 remotes, 3rd function on loader.
Just
$10,500 !
Scan to view:
Just
$55,000 !
Scan to view:
John Deere Power Harrow
or call
03 6111 4727
Valentini 6000 Maxi Diablo 6m Hyd fold power harrow. Levelling Bar Packer roller. Heavy duty
gear boxes require minor work before service.
2003 John Deere 6620
or call
03 6111 4727
Premium cabin tractor, Triple link suspension, cabin suspension, Re-manufactured infinitely
variable trans passenger seat, 520/85R38 rear and 480/70R28 front tyres.
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 103

DEALS
Just
$77,000 !
Scan to view:
Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$148,500 !
Scan to view:
2019 John Deere 956
or call
03 8547 8800
956 Moco 2019 model, tri lobe steel rollers, drawbar hitch, completed 3,000 acres only.
Hydraulic tilt control.
2004 John Deere 9760STS
or call
03 8547 8800
30.5x32 & 18.4x26 tyres. Chopper, 6.6m std unloading auger. Includes John Deere 936D
draper but have choice of fronts available.
Just
$55,000 !
Scan to view:
Just
$55,000 !
Scan to view:
John Deere 9650CTS
Harvester, 2894 Sep Hrs w/- chopper/Chaffer, fronts available, 4396 usage hrs.
or call
03 8547 8800
2008 Goldacres 6530
or call
03 8547 8800
6500L 30M dual line Goldacres sprayer, Raven controller, CIH, TC, 400L FW, 20.8x38 tyres. Air
bags, MG, direct inj tank, Hyd drive.
Just
$165,000 !
Scan to view:
Just
$90,000 !
Scan to view:
2004 John Deere 9860 STS
or call
03 8547 8800
Chopper, 6.9m HUR unloading auger, 800/70R38 & 600/65R28 tyres, Greenstar ready, HID
lights. Choice of fronts.
2001 John Deere 9750 STS
or call
03 8547 8800
5083 eng hrs and 3556 rotor hrs, 4WD grain machine, straw spreaders, New bullet rotor two
years ago. 2004 936D Draper front with contractorís comb trailer.
Just
$55,000 !
Scan to view:
Just
$49,500 !
Scan to view:
Midwest 40 FT MID
or call
03 8547 8800
One used MidWest DR40 40’ draper front with batt reel and trailer to suit. Suits John Deere
60/70 Series.
2016 John Deere 946
or call
03 8547 8800
Centre Pivot Rotary Mower Conditioner, 4 metre cut, Tri-Lobe conditioner rollers, Rockshaft
swivel hitch, Hyd tilt control, Good condition.
104 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

Scan the QR Code with your phone camera
to find out more about these Hot Deals!
Just
$36,300 !
Scan to view:
DEALS
Just
$71,500 !
Scan to view:
2010 John Deere 1910
Air Cart - SeedStar CCS monitor, less display. Location - Dalwallinu, WA
or call
08 6336 7780
2013 Simplicity TBL3 12000
or call
08 6336 7780
2 tank configuration - variable rate - TopCon Apollo - 2 dry/1 liquid - X25 screen - 3500Lt liquid
- 6 run single shoot.
Just
$242,000 !
Scan to view:
Just
$12,650 !
Scan to view:
2012 John Deere S690
or call
08 6336 7780
Combine harvester - singles - chopper - 800/70R38 front tyres - 750/65R25 rear tyres - 2652
engine hours, 2091 sep hours.
2009 Toro 3100D
or call
08 6336 7780
Reel mower - In very good condition considering age and hours. New cutting heads installed
in June 2020.
Just
$275,000 !
Scan to view:
Just
$126,500 !
Scan to view:
2010 Challenger MT855C
or call
08 6336 7780
Approx. 5500hrs at delivery - 30” tracks on wide spacing - PTO - 5 remotes - 16 speed
PowerShift trans - Standard Light Package.
2017 Agrowplow AP91
or call
08 6336 7780
Deep ripper - in excellent condition, first used in March 2018 - 12m rip width, 600mm working
depth - 34 shanks/ 23 rows, 520mm spacings.
Just
$71,500 !
Scan to view:
Just
$88,000 !
Scan to view:
2015 John Deere 1830
or call
08 6336 7780
40’ @ 12” spacings - single shoot - stiletto points & boots - 550 lb. opener on four ranks - 3 x 21
semi-pneumatic press wheels - dual main & wing caster wheels.
2015 John Deere 1910
Air seeder cart.
or call
08 6336 7780
THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 105

4/3/20, 2:48 pm
Page 1 of 1
4/3/20, 2:48 pm
Page 1 of 1
NEW AND USED TRACTORS FOR SALE IN
AUSTRALIA BAUER TRADER MEDIA
Find new and used Tractors for sale with Farms & Farm Machinery
magazine
NEXT
SEARCH
Page 1 of 188 (1,875 results)
Sort by Premium Ads
list
NEW AND USED TRACTORS FOR SALE IN
AUSTRALIA
Find new and used Tractors for GET sale ALERTS
with Farms & Farm Machinery
magazine
CASE IH MAXXFARM 25 TRACTOR NEXT
$19,750
Page 1 of 188 (1,875 results)
Sort by Premium Ads
CASE IH MAXXFARM 25 TRACTOR
$19,750
Tractors / Tractors / 0-40hp ! CALL 08 7007 6847
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD
FEL: YES Rated Engine SAVE Power - ITEM hp: 28
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380
hours indicated, with books, approximately 28 horsepower, AS NEW *price
includes gst
EMAIL SELLER
Mclaren Vale, SA
KUBOTA 8540
! CALL 08 7007 6847
$22,000
KUBOTA 8540
$22,000
BAUER TRADER MEDIA
SEARCH
GET ALERTS
SAVE ITEM
EMAIL SELLER
Tractors / Tractors / 40-100hp
RefCode: TA994405 Class: 40-100hp Drive Type: FWA
Number Cylinders/cc: 4 Rated Engine Power - hp: 85
Usage Hours: 5,800
Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives
very well. Xgoverment . Inspection most welcome
Stonyford, VIC
Tractors / Tractors / 40-100hp
! CALL 03 8547 8644
RefCode: TA994405 Class: 40-100hp Drive Type: FWA
Number Cylinders/cc: 4 Rated Engine Power - hp: 85
Usage Hours: 5,800 SAVE ITEM
Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives
very well. Xgoverment . Inspection most welcome
EMAIL SELLER
Stonyford, VIC
KUBOTA L1-24DT TRACTOR WITH 4 IN 1
! CALL 03 8547 8644
FEL 28HP
$21,450
SAVE ITEM
EMAIL SELLER
list
map
map
Tractors / Tractors / 0-40hp
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD
FEL: YES Rated Engine Power - hp: 28
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380
hours indicated, with books, approximately 28 horsepower, AS NEW *price
includes gst
Mclaren Vale, SA
Powered by
RESEARCH • COMPARE • BUY • SELL
AUSTRALIA’S #1
FARM MACHINERY MARKETPLACE *
BUY
More than 40,000 tractors,
spreaders, harvesters, hay tools,
feeders, sprayers, trailers, and
attachments, and other parts and
accessories currently listed for sale
SELL
Unlimited
stock listings on
TradeFarmMachinery.com.au
for just
$360 per month
www.TradeFarmMachinery.com.au
* Based on stock items for sale as at March 2020

ISSUE 340
Forklifts, Machine Tools, Pumps, Generators & Industrial Equipment
match fit
Dealer Adaptalift’s considered approach helped the WA base of storage solutions
company Unirack select the best forklift for their operations
– a new Yale GP25UX . More at TradePlantEquipment.com.au
$18,000
2007 AIRMAN PDS185S-6B4-T screw compressor.
4 cyl Nissan diesel, ready to use • VIC 0412 217 107
$28,000
2018 HAFCO METALMASTER PB-70. Pressbrake, fasfold
+ safety guarding system. • QLD 0413 380 615
$27,500
2016 EP CPYD70-RW5 Forklift. 6200kg lift capacity,
perfect for warehouse work • VIC 0421 110 210
18,430+ items for sale in print & online

AUSTRALIA’S
LARGEST
FORKLIFT
WHOLESALER
Contact us for a
deal on a wholesale
package of quality
used equipment.
1300 438 3675
formidableforklifts.com.au
6/220-230 Barry Rd, Campbellfield (03) 9357 6291
Sales@formidableforklifts.com.au

TradeFarmMachinery.com.au 109
www.flt.com.au FreeCall: 1800 688 788 Email: sales@FLT.com.au Contact: Michael Carlin 0418 299 555
Stock located in Sydney, Brisbane, Melbourne, Perth
KALMAR DCF370-12
2012, 2 available and a pair of DCF330-12. 2,440mm forks,
sideshift, fork positioner. Option 20x40 spreader. Mine site spec.
R3548. TA828696.
For Sale or Hire POA Freecall: 1800688788
OMEGA 36D
2010, stack highcube 20' containers 3 high. Enclosed air
conditioned cab, excellent condition ready for delivery. R3467.
TA737310.
For Sale or Hire POA FreeCall 1800688788
HYSTER H32.00F
2008, Can stack 31,500kg highcube 20' laden containers 3 high.
Option 40' Drive In Spreader. Low tech easy fix model. R3388.
TA394061.
For Sale or Hire POA
SMV SMV12-1200B
Ideal for furniture containers - stacks 12,000kg 20' highcubes
Option 40' drive in quick attach spreader. R3560. TA846678.
For Sale or Hire POA FreeCall 1800688788
KALMAR (NEW) DRU450
Reach Stacker from Global Industry Leading Port Handling
Equipment Manufacturer. Immediate delivery available. S89.
TA1081384.
For Sale or Hire POA Hire to Buy
HYSTER (NEW) H16XD-6
16,000kg at 600mm load centre with 3750mm or 4650mm lift
height, fork positioning sideshift and 2440mm forks. Mast on
Transport
Sale or Hire FreeCall 1800688788. R 8888. TA395730.
POA For Sale or Hire Ph: 1800 688 788
HYSTER H18.00XM-12
2008, 18,000kg highcube 20' containers 3 high with 2440 forks +
fork positioning sideshift. Option 14,000kg with ELME 558 Sidelift
for 20' and 40' highcube. R3282. TA511086.
For Sale or Hire POA $FreeCall 1800 688788
OMEGA 7ECH
twin picks and stacks 20x40 empty containers 7 high. Similar 5/6
high low hour Kalmars also in stock. R3355. TA400307.
For Sale or Hire POA Ph 1800 688 788
HYSTER H16.00XM-6
2440mmm long forks, fork positioning sideshift, 3500mm lift height
easy transport lowered height Cummins diesel. R3629. TA1073594.
POA For Sale or Hire Ph: 1800 688 788
ISOLOADER 21
Load unload and travel with 27t 20' and 40' containers. New Kohler
diesel - Low cost container handler. R3621. TA1061595.
Buy or Hire FreeCall 1800 688788 POA
MOBICON 33T
load unload and travel 33,000kg 20' and 40' shipping containers.
For sale & wanted. R3299. TA148664.
For Sale or Hire Ph: 1800 688788 POA
www.FLT.com.au FreeCall: 1800 688 788
PRENTICE 7,000KG SWL
Forklift Truck Ramps (8) to pick from. Ideal for shipping containers.
For Sale or Hire. Ph: 1800 688 788. R 3274. TA96974.
$12,000 + GST = $13,200 For Sale or Hire
PET-FP-5011476-B

110 TradeFarmMachinery.com.au
SKYJACK SJ12 2011,
12 Electric Manlifts, plenty to choose from.
227kg lift capacity all in good condition.
Located in Melbourne, Sydney, Brisbane &
North Qld. In test from October 2021 until
July 2022. Various from M1209 - M1286. TA1085279.
$3,500 + GST = $3,850
JLG 340AJ 2011,
34 Diesel Knuckle Booms, 8 machines to
choose from. 227kg lift capacity all in good
condition. Located in Brisbane & Melbourne.
In test from October 2021 until February 2022.
Various from KBD3490 - KBD3499. TA1085281.
$20,000 + GST = $22,000
JLG 600AJ
60 4WD Knuckle Booms. 10 machines offered
and all are equipped with 7kVa on-board generators.
These machines are all in test from June 2021 until
April 2022 and are located in Brisbane & Melbourne.
Various from KB6058 - KB6071. TA1033085.
$40,000 + GST = $44,000
JLG 800AJ
80 4WD Knuckle Booms. 8 machines offered and
all are equipped with 7kVa on-board generators.
These machines are all in test from October 2021 until
May 2022 and are located in Brisbane, Sydney &
Melbourne. Various from KB8023 - KB8028. TA1045325.
$52,000 + GST = $57,200
JLG B660SJ
66 4WD Telescopic Boomlifts. 3 machines offered and
all are equipped with 7kVa on-board generators. These
machines are all in test from November 2022 until
December 2022. Located in Brisbane & Townsville.
B6626, B6627 & BB6628. TA1019572.
$50,000 + GST = $55,000
JLG B860SJ
86 4WD Telescopic Boomlifts. 10 machines offered and
all are equipped with 7kVa on-board generators. These
machines are all in test from August 2021 until March
2022. Located in Melbourne, Sydney, Brisbane &
North Qld. Various from B8617 - B8626. TA1053426.
$38,000 + GST = $41,800
MERLO P34.7
3.4 ton, 7.0 metre Telehandlers. 3 machines offered.
They are in test from March 2022 until October 2022.
Machines are located in Brisbane & North Qld. T34702,
T34705 & T34708. TA1085283.
$40,000 + GST = $44,000
0457 110 110
sales@skyreach.com.au
www.skyreach.com.au
MERLO P38.13
3.8 ton, 13 metre Telehandlers. 3 machines offered.
In test from February 2022 until October 2022.
Machines located in Brisbane and North Qld.T38135,
T38137 & T381312. TA1019584.
$50,000 + GST = $55,000
JLG 4013PS
4.0 ton, 13 metre Telehandlers. 6 machines offered.
In test from December 2021 until June 2022. Machines
located in Brisbane & Melbourne.
Various from T40137 - T401312. TA1065867.
$55,000 + GST = $60,500
PET-FP-5126550-A

TradeFarmMachinery.com.au 111
HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES
PTY LIMITED ABN 17 064 853 318
2500KG Gas Forklift Hire From $100 Per Week
BLISS FOX F1-80
90 Tonne Diesel Tow Tug.
K069. TA1046649.
$77,000
KOMATSU FG25HT-16
2.5 Tonne LPG Forklift with 4.5 Metre Lift. D018.
TA1089919.
$12,100
UNKNOWN HIRE
Large Range of Forklifts Available for Hire - From
$100+GST Per Week.
HIRE. TA618531.
From $100 Per Week
TOYOTA 2TG10
15 Tonne LPG Tow Tug. F040. TA1081388.
$17,600
TAILGATOR EHD2000
2 Tonne Diesel Self Loading Forklift with 3 Metre
Lift. H069. TA1060070.
$29,700
TOYOTA CBTY4
4 Tonne Electric Stand-on Tow Tug.
CBTY4. TA1027566.
$7,700
6 MARIEANNE PLACE, MINCHINBURY, NSW, 2770
P: (02) 9832 9777 F: (02) 9832 9977
E: aonefork@lifttrucks.com.au
CROWN CG25P-3
2.5 Tonne LPG Forklift 5 Metre Lift. I048. TA1089924.
$11,000
KARCHER KM100
LPG Sweeper. L057. TA1082754.
$7,700
KOMATSU FG25HT-16
2.5 Tonne LPG Forklift with 4.5 Metre Lift. D013.
TA1089915.
$15,400
USED FORKLIFT HOTLINE: (02) 9832 9777 USED FORKLIFT HOTLINE: (02) 9832 9777 USED FORKLIFT HOTLINE: (02) 9832 9777
HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES
PET-FP-5011641-A

112 TradeFarmMachinery.com.au
FW&RBCRIGHTONRURALENGINEERINGPTYLTDtradingas
Heavy Duty Outdoor Fire Bucket
If you are looking for a fire bucket... for your
9 year old daughter's birthday party, you
should go to Bunnings.
RURAL ENGINEERING Pty Ltd
Cnr Nailor & Moama St, Hay, NSW, 2711
Ph:02 6993 1768 Fax:02 6993 3042
MOB: 0428 931 768
“NEW”SPIRALWELDSTEELPIPE
100–1800NBAssortedwallthickness,POA
If you want a
Fire Bucket /
Pit which will
make you
mates weak
at the knees,
have a look
at this.
BULK
ORDERDISCOUNTS
$900
“NEW”BLACKPIPE
4.5mm(114mmOD)2.4&3mlengthsfrom$47+GSTeach
3.5mm(88.9mmOD)2.4&3mlengthsfrom$40+GSTeach
PUMPSETS
4”36”Pumpsets
Diesel&Electric
ALLTERRAINCOLESHYDRACRANE
Goodclearance4WD,mechanically
sound,goodtyres&roadspeed.
18mboom,currentlynotregistered.
$29,000
ALLENQUIRESph0269931768orcallJasen0428931768
PET-FP-5176479-CS-289

TradeFarmMachinery.com.au 113
DIESEL ENGINES Pty Ltd
New and Used Diesel Engines and Generators
Brett: 0408 781 735
Sunny: 0418 781 835
E-mail: sales@diesel-engine.com.au
Address: 30 Paringa Road, Murarrie QLD 4172
1 X HARBOUR MASTER
SCHOTTEL DRIVE
KUBOTA V2203
PRESSURE CLEANER
YOKOHAMA FENDERS
LARGE NUMBER OF USED
RUNNING AND PARTS
GENERATORS IN STOCK
BRAND NEW WATER PUMP
ENG, 27HP DIESEL, 3 CYLINDER,
RADIATOR, MUFFLER &
STUBSHAFT INCLUDED
BRAND NEW WATER PUMP
ENGINE, 36HP DIESEL, 4
CYLINDER, RADIATOR, MUFFLER
AND STUBSHAFT INCLUDED
MARINE WINCHES PERKINS 4236
PRESSURE CLEANER
BRAND NEW WATER PUMP
ENGINE, 56HP DIESEL, 4
CYLINDER, RADIATOR ,MUFFLER
AND STUBSHAFT INCLUDED
BRAND NEW WATER PUMP
ENGINE, 88HP DIESEL, 4
CYLINDER, RADIATOR, MUFFLER
AND STUBSHAFT INCLUDED
CUMMINS 6CTA8.3-C260
260HP 1135NM @ 1800RPM
ENGINE - NEW
CUMMINS KTA19-P600 600HP
@ 1500RPM ENGINE W/
RADIATOR- NEW
F3L912 BENEI 38HP ENGINE
- NEW
CUMMINS 6BT5.9 MARINE
W/ZF301C 1.1:1 GEARBOX –
210HP @ 2600RPM
CUMMINS KT19-M425 NEW/
UNUSED KEEL COOLED AND
HEAT EXCHANGER COOLED
Detroit 471 Naturally aspirated Ex
standby generator engine Variable
revs Low Hour Under 1000
PET-FP-5012529-CS-339
BRAND NEW 4” DIESEL,
POWERED WATER PUMP
MODEL WP100Y, 4 CYLINDER
DIESEL, 80M3 /HR 20M HEAD
C18 CATERPILLARS
1000 HP
CUMMINS QSM11
MARINE X2
ANCHORS
250KG – 5T
WWW.DIESEL-ENGINE.COM.AU

114 TradeFarmMachinery.com.au
(07) 4630 4784
www.nkf.net.au
STEEL POST ROUND POST
HEAVY DUTY FENCE POST
Drill Pipe - Galvanised
73mm x 5mm x 2900mm
1 = $60.00 : 20 = $1,140.00
Prices are inclusive of GST. FENCING004. TA1077304.
$1,140
MOBILE DIESEL TANK 200 LITRE
L800mm x W600mm x H620mm.
TANK019. TA1085560.
$660
HDPE POLY PIPE DN800MM DN630MM
DN560MM DN450MM DN400MM
DN315MM DN160MM
Second hand
Purple stripe. S183. TA1085567.
POA
STAR PICKETS STEEL
Heavy duty
1800mm x Black x 14 Holes
1 = $7.00 : 10 = $66.00 : 200 = $1,300.00
Prices are inclusive of GST
FENCING001. TA1077287.
$7
DEMAG ELECTRIC HOIST
Second Hand Demag Electric Hoist. S188. TA1089569.
$3,500
STAR PICKETS STEEL
Heavy Duty Star Pickets
1800mm x Galvanised x 14 Holes
1 = $12.00 : 10 = $110.00 : 200 = $2,000.00
Prices are inclusive of GST
FENCING002. TA1077294.
$12
STEEL PIPE 273.1MM X 6.35MM X 12
METRES
Second hand
273.1mm OD x 6.35mm wall x 12 metres. S181.
TA1085565.
$715
NKF
Lot 8 Wirth Road Charlton, Toowoomba, QLD 4350
PO Box 58 Wyalla Plaza Q 4350
CROWD CONTROL FENCING
Second hand temporary fencing panels
2100mm x 1100mm high
Two feet included in price. FENCING158A. TA1077310.
$28
(07) 4630 4784
E sales@nkf.net.au www.nkf.net.au
“ * Prices subject to change, check website or ring for current pricing.”
STEEL POST ROUND POST
HEAVY DUTY FENCE POST
Drill Pipe - Galvanised
60mm x 5mm x 2900mm. FENCING003. TA1077303.
$48
Specialising in Second Hand Industrial Equipment
Mob: 0419 002 950
PET-FP-5190451-A

TradeFarmMachinery.com.au 115
(07) 4630 4784
www.nkf.net.au
STEEL PIPE 1067MM X 23.5MM X 12
METRES
Second hand
1067mm OD x 23.5mm Wall Thickness x 12
Metre Lengths. PIPE143A. TA1085564.
$10,170
LIFTING EQUIPMENT
Second hand lifting equipment
Chain & level blocks, lifting chains,
slings, girder clamps etc..
Full stock list available on website
S147. TA1053486.
POA
CONCRETE FIBRE PIPES
Concrete Fibre Pipes
340mmOD x 20mm Wall Thickness x 4 Metres.
S151. TA1053513.
$121
STEEL PLATE
3x2m 16mm gal $745
6.1x1.5m 20mm gal $1,805
6x1.85m 40mm mild $3,060
S150. TA1053503.
POA
SITE OFFICE PORTABLE BUILDING
Second Hand Portable Office Building
9.5 Metres Long x 3 Metres Wide x 2.8 Metres
High. S189. TA1089582.
$22,000
SECOND HAND STEEL PIPE STEEL PIPE
approx. 457.2mm OD x 7.92mm wall x 12 metres.
S187. TA1085574.
$1,510
UNUSED TOOL BOX STANLEY
L 570mm x W 250mm x H 330MM.. S186. TA1085572.
$80
NKF
Lot 8 Wirth Road Charlton, Toowoomba, QLD 4350
PO Box 58 Wyalla Plaza Q 4350
FREIGHT SERVICES AVAILABLE
Road train capable of general freight. QLD &
Northern NSW. Call for a quote
S137. TA983091.
POA
(07) 4630 4784
E sales@nkf.net.au www.nkf.net.au
“ * Prices subject to change, check website or ring for current pricing.”
LARGE STEEL PIPE
Second Hand Steel Pipe
Various Sizes Available. PIPE. TA983085.
POA
Specialising in Second Hand Industrial Equipment
Mob: 0419 002 950
PET-FP-5190451-A

“Setting the standard for Quality & Value”
THE INDUSTRY ’S CHOICE!
CNC
Machinery
Metal
Working
Sheet Metal
Fabrication
Wood
Working
Workshop
& Automotive
Lifting
Handling
Cutting
Tools
Established 1930
Machine Tool
Accessories
Measuring
Equipment
EB-320DS - Swivel Head-Dual
Mitre Metal Cutting Band Saw
• 310 x 205mm capacity
• Swivel head dual mitre up to 60º
• Ball bearing & carbide blade guides
• Quick action clamp lever
• Unique sliding vice design
• 2hp, 415V - 2 speed motor
• Includes adjustable
length stop
Order Code: B067
$
5,150
GHD-55G - Industrial 4MT Geared
Head Drilling Machine
• 50mm drilling capacity
• 4MT spindle taper
• M42 thread tapping capacity
• Motorised rise & fall work table
• 16 speeds 45-2000rpm
• 600 x 600mm work table
• 2.8kW / 3.7hp, 415V motor
• Includes coolant system,
drill chuck & arbor
Order Code: D175
$
8,250
AUTOMATIC
DRILLING
FEEDS
BS-10LS - Swivel Head Metal
Cutting Band Saw
• 468 x 250mm capacity
• Variable blade speed system
• Swivel head mitre cut to 45º
• Laser line material guide
• Ball bearing & carbide blade guides
• Quick action material clamp
• 1.5kW / 2hp, 415V motor
Order Code: B021
$
5,450
SAVE $100
Made in Taiwan
SAVE $250
SAVE $140
Made in Taiwan
TB-70 - Electric Pipe &
Tube Bender - Digital
Control, Includes Stand
• Ø51mm OD x 3mm round
tube capacity
• Ø2" NB x 1/8" pipe capacity
• Stores up to 50 programs
• 2.2kW 415V motor
• Includes Ø1/2", 3/4", Ø1" &
Ø1-1/4" NB pipe formers
Order Code: T607
$
11,650
HPM-300T - Industrial
Motorised Hydraulic Press
• 300 tonne force
• Left & right sliding ram
• 1300mm width between front post
• 370mm piston ram stroke
• Joystick pressure control
• One piece table plate insert
• 22kW / 30hp, 415V motor
• Includes pressure gauge
Order Code: P408M
$
17,950
JOYSTICK
PRESSURE
CONTROL
RAD-900
Radial Arm Drill
• 38mm drill capacity
• M20 tapping capacity
• Joystick spindle
& height control
• 3 Speed auto down-feed
• 200mm drill depth
• 1.5kW / 2hp, 415V motor
Order Code: D165
$
14,250
SAVE $200
SAVE $500
SAVE $500
Made in Taiwan
BM-40V
Industrial Turret Milling Machine
• 3 Axis digital readout
• NT30 spindle taper
• (X) 860mm (Y) 360mm (Z) 425mm
• Hardened & ground slides & table
• 1370 x 254mm work table
• Meehanite grade casting
• 2.2kw/3hp, 415V motor
• Includes vice & clamp kit
VARIABLE
SPEED
70-3500RPM
RDB-250
Motorised Pipe &
Tube Rotary Draw Bender
• Ø1/2" - Ø2" NB pipe capacity
• Ø6.35 - Ø63.5mm round
tube capacity
• Touch screen
programmable controller
• Stores 170 programs
of 10 bends each
• 240V power supply
HG-2504 - Hydraulic NC
Swing Beam Guillotine
• 2500 x 4mm capacity
• 1-Axis Estun E21S control
• 6CrW2Si blades for stainless steel
• Blade gap adjusting dial
• 250mm throat depth
• 4kW / 5.5hp 415V motor
Order Code: S934
$
20,750
SAVE $500
CL-100A - Centre Lathe
• Ø660 x 3000mm turning capacity
• Large 105mm spindle bore
• 16 spindle speeds 25-1600rpm
• 400mm wide induction
hardened cast iron bed
• 2 Axis digital readout system
• X & Z axis rapid traverse
selection lever
• Lubrication pump on
saddle oiling slides
• 10HP 415V main motor
HARDENED BALLSCREW
BACKGAUGE
Order Code: M607D
$
12,650
SAVE $300
Made in Taiwan
Order Code: B8085
$
15,950
GREAT VALUE!
Order Code: L628D
$
30,950
SAVE $500
QUICK CHANGE TOOLPOST
WITH HOLDERS
UNIQUE PROMO CODE
PE0721
ONLINE OR INSTORE!
VIEW AND PURCHASE THESE ITEMS ONLINE AT
www.machineryhouse.com.au/PE0721
SYDNEY
(02) 9890 9111
1/2 Windsor Rd,
Northmead
BRISBANE
(07) 3715 2200
625 Boundary Rd,
Coopers Plains
MELBOURNE
(03) 9212 4422
4 Abbotts Rd,
Dandenong
PERTH
(08) 9373 9999
11 Valentine St,
Kewdale
Specifications & Prices are subject to change without notification. All prices exclude GST and valid until 02-08-21
07_P&E_050721

Powered by
RESEARCH • COMPARE • BUY • SELL
AUSTRALIA’S #1
INDUSTRIAL EQUIPMENT MARKETPLACE *
BUY
More than 20,800 used and
dealer demo forklifts, cranes,
generators, compressors, pumps,
engines, metal fabrication
machines and lots more for sale
SELL
Unlimited stock listings
across the Are Media
Transport & Machinery
Classifieds Network
just $360 per month
www.TradePlantEquipment.com.au
* Based on stock items for sale as at October 2020

118 TradeFarmMachinery.com.au
Colin: 0411 644 477
28 Goodman Place,
Murarrie, QLD, 4172
GENIE GS3268RT
4WD diesel scissor lift - good all
round condition, still working in
rental fleet only 2 left. S1.
TA1054069.
$20,000 + GST
SNAPPY HEAVY DUTY
Scaffold. S2. TA1054072.
$550 + GST
SNAPPY MOBILE
Mobile scaffolds for sale,
supplied to your required
height. S3. TA1054075.
POA
SNORKEL ATB60-CU
4WD- diesel 18m boom lift,
very robust reliable
machine. Very versatile. S4.
TA1054078.
$20,500 + GST
SNORKEL PRO66 RDZ
4WD diesel 20m boom lift -
good safe working order.
Still working in rental fleet.
S6. TA1054082.
$24,500 + GST
SNORKEL SRT2770 RT
8.5m diesel scissor lift -
very reliable, great value.
S8. TA1054084.
$15,500 + GST
SNORKEL TB50 RTZ
4WD diesel 15m boom lift -
popular size, very reliable
model. S9. TA1054085.
$17,500 + GST
SNORKEL TB60 RTZ
4WD diesel boom lift - good
reliable unit. Still working in
rental fleet. S10. TA1054088.
$16,500 + GST
SNORKEL TB60 RTZ
RDZ-4WD diesel boom lift
(2) - good reliable machine.
Still working in rental fleet.
S11. TA1054089.
$18,500 + GST
SNORKEL TB60 RDZ
4WD diesel boom lift (3) in
good safe working order.
Still working in rental fleet.
S12. TA1054090.
$22,500 + GST
DOW-FP-5211710-A
www.hireach.com.au

TradeFarmMachinery.com.au 119
SMV 4531
REACH STACKER, 45,000KG LIFT, SCANIA
DIESEL, AUTOMATIC TRANSMISSION
HYSTER H48.00XM-16CH
40,000KG@1,610MM, CUMMINS QSM11,
AUTO 4 SPEED
OMEGA 36C
32,000KG@1,200MM, CUMMINS 6CT,
CLARK 3SP AUTO, INDEPENDANT TYNES
HYSTER H50CT
2,180KG@610MM, LPG, MAZDA 4CYL,
POWERSHIFT TRANSMISSION
HYSTER H48.00C-16CH
40,000KG@1,400MM, DEDICATED
CONTAINER ATTACHMENT 20’-40’
HYSTER H6.00XL
5,200KG@600MM, DIESEL, 2SP
POWERSHIFT, 1,220MM TYNES
PET-FP-5011670-CS-340
SMV SL32-1200-A
32,000KG@1,200MM, 6CYL SCANIA,
DANA TRANSMISSION, 2,400MM TYNES
HYSTER H16XM-12EC
9,000KG@1,200MM, CUMMINS QSB 5.9, ZF
3WG-201, 3 SPEED POWERSHIFT TRANS
HYSTER H225H
TYRE HANDLER, PERKINS PHAZER,
HYSTER 3SP AUTO,4,640KG@2,540MM

120 TradeFarmMachinery.com.au
69 LOUDOUN ROAD
DALBY, QLD 4405
Yard Phone (07) 4662 0900
Mobile Phone 0417 617 461
Fax (07) 4662 0911
Email: thomastrading@bigpond.com
www.thomasmanufacturing.com.au
THOMAS RADIAL
STACKER
15m x 900mm wide
hydraulic drive hydraulic
raise & lower.
TRS15MX900. TA114185.
Quoted to Customer Spec
POA
THOMAS FEED HOPPER 20
CUBIC METER
with 900mm wide
feed conveyor.
TH20900. TA122049.
Quoted to Customer Spec
POA
THOMAS MINI BATCHING
PLANT
... ThomasMiniBP. TA810526.
Prices start from $90,200
THOMAS 8 X 4 2 DECK
SCREEN
This is a sample of small
screen boxes that we can
manufacture on order.
TH8X42DS. TA250778.
Quoted to Customer Spec
POA
THOMAS PRE COATING
PLANT
1 x 6 cubic metre Hopper
with 750 wide Feed
Conveyor. 12 metre x 600
wide Radial Stacker.
Electrical Cabinet on
stand, fitted with all
necessary starting
equipment. THPCP2014.
TADPLIn77608.
Quoted to Customer Spec
POA
PET-F-GMAI-5059125-A

TradeFarmMachinery.com.au 121
www.liftek.com.au
0447 64 33 23
Griffith, NSW
E: sales@liftek.com.au
SNORKEL AND TRAILER PACKAGES Various S1930,
1930ES Genie 1932 available, new and used trailers
available, call for more info. S34. TA819706. $13,950
TOYOTA 32-8FG25 2012, Model container mast 4.5M 3
stage mast, side shift, only 5000 hours, solid tyres,
serviced ready for work. S78. TA1081374. $18,800 +GST
FORWARD BIN TIPPER New and Used available, call for
more info. S6. TA653780.
$4,000 + GST
TOYOTA 7FBE18 ELECTRICS 1.8 ton lift capacity with 3
stage mast, also available 7FBE20 with container mast,
call for more info. S21. TA731606. $12,100
MITSUBISHI 4.5 TON DIESEL 2 stage mast, side shift
Dual wheels, serviced, new paint. S74. TA1065862.
$17,500 + GST
TOYOTA 32-8FG30 3 TON 3 Stage Container Mast, Side
Shift Solid Tyres. Fully Serviced. S68. TA1001248.
$16,000 + GST
TRUCK WASH TWR 35 Brand new, 500ltr tank, 2100mm brush
width, chemical regulation. Only requires one hydraulic forklift
function. Will clean a B-Double in 10 minutes. S63. TA988194.
$9,500 + GST
MERLO P40.17 2013, 4.0 TON, 17M, 2013 commission,
only 2900 hours, very clean and tight machine,
serviced and ready for any work
S77. TA1080173. $74,800
JLG E400 ELECTRIC KNUCKLE LIFTS with
recertification ready for work. Call for more info. S3.
TA653777.
$28,900 + GST
Over 80 Forklifts, scissorlifts, telehandlers to choose from
PET-FP-5208733-A

122 TradeFarmMachinery.com.au
A.C.N. 086 652 226
Generators New & Used
CATERPILLAR, CUMMINS, DETROIT, VOLVO,
LISTER, ENGLISH ELECTRIC DORMAN, DEUTZ,
PAXSMAN, FORD, RUSTON, TURBINES
KOMATSU 4D105-5
Generator Komatsu 35kva, 1000hours. Fuel tank, circuit breaker and
muffler mounted in sound reduced 20 ft shipping container. S263.
TA1084885.
$10,500
CATERPILLAR 3516B
2011, one 2250 kva and one 2000 kva. Maintained by caterpillar
with under 100 hours on them.
Can be set up in containers or open sets upon negotiation. S264.
TA1084888.
$210,000
CATERPILLAR 3508
Generator, 1000KVA, ex-standby with 1700 hours. Radiator cooled,
electronic governor. Maintained weekly.. S244. TA1063222.
$90,000
CATERPILLAR C15
Radiators, caterpillar 220kva radiators brand new. Measurements in
pictures, reasonable offers welcome. S247. TA1064847.
$5,000
1166 Wellington Road Narre Warren East, Victoria, Australia 3804
Darren: 0418 364 166 | aaamachinery@yahoo.com.au
OLYIMPIAN 28KVA ALTERNATOR
**BRAND NEW**
28kVA 240V 1-Phase
1500RPM. S191. TA973839.
$1,650
CATERPILLAR 3412, 750KVA
1997, Ex-standby set with 283 hours, set is like new and comes
with muffler, fuel tank and sound reduced drop over canopy. S253.
TA1069043.
$80,000
WE BUY GENERATORS
Scott: 0400 658 496 | scott@stcontractingvic.com
PET-HH-5011243-A
WELDING EQUIPMENT
AIRMAN PDS70
70cfm compressor, reconditioned. 2400 hrs. Diesel engine driven.
$8,900
MILLER AIRPAK
Diesel Driven
Welder, Generator,
Compressor.
$25,750 + GST
LINCOLN 305D
2009, Diesel
Driven Welder,
Generator.
300amp DC
multi-process
$12,100
LINCOLN
VANTAGE 580
ENGINE WELDER
Multiple units fully
tested, With
warranty.
$14,500
LINCOLN
VANTAGE 575
Diesel Welder.
$8,500 inc GST
AIRMAN PDS125
Diesel Driven
Compressor -
125CFM.
$12,595
OUR USED EQUIPMENT IS SOLD WITH A WARRANTY
07 3375 4146
1310 Boundary rd WACOL QLD 4076
36 Carmel st Garbutt QLD 4814

TradeFarmMachinery.com.au 123
19-29 Curlew Cresc
Tamworth NSW 2340
www.philhuntparts.com.au
brendan@philhuntparts.com.au
ALLIS CHALMERS HD11EP Just in for Dismantling, Complete
Running Machine, Powershift Transmission and Torque Converter,
Near New Chains and Sprockets, Rear Rippers, Angle Tilt Blade,
Engine Runs Well, Machine Operates well, All Parts Available. S156.
TA1076660.
POA
ALLIS CHALMERS HD11E Just in for Dismantling, Starts Runs and
Drives, Rear Rippers, Angle Tilt Blade, Tree Pusher, Good
Undercarriage, All Parts Available, Phone Brendan 02 6762 4466.
S160. TA1088611. POA
PHIL HUNT
PARTS
RING ALL HOURS
NEW AND S/H PARTS
ALLIS-CHALMERS/HANOMAG/MASSEY
JOHN DEERE INDUSTRIAL
PARTS FOR Dozers, Loaders, Drotts,
Graders, Scrapers
WRECKING DOZERS
ALLIS-CHALMERS: Model “M”, HD5, HD6B,E, HD7W, HD7G,
HDIIB, EP,
HD15-16, HD16DC, HD16DP, HD19-21, HD41B
FIAT: 451C, 555, 605, 50CI, 70CI, AT7C, 8B,
BD10B, FD10E, BD20
HANOMAG/MASSEY: 2244, 200, 300, 3366, 400, 500, L400C,
L600C, D600D Super, D700C
JOHN DEERE : 1010C, 850
LOADERS
ALLIS-CHALMERS: TL12D, TL14, TL20, 545,
605B, 645, 745B,C
FIAT: FR20B
LD3, LD5, LD7 & LD9 Scoopmobile
HANOMAG/MASSEY 22,33C,44, 55, CL55C,66C-D, 77
GRADERS
ALLIS-CHALMERS: D, DD, M65, 65B, AD30-40, 45, 145, M100A,
B, FG95
DRMCO/CHAMPION 562, 600, 720, 740
JOHN DEERE 570, 570A, 670A, 770, 770A, 772A
ALLIS WHEEL TRACTORS
AC D17, D19, D21, XT190, 7000, 7010, 7020, 7040, 7060, 7080,
8010, 8050, 8070, 7580, 8550, 440
ALSO AVAILABLE
Track Chains, Rollers, Idlers, Sprockets
Various 4-1 Buckets, POA
A/H: (02) 6762 4466
Ph: (02) 6762 4466
Fax: (02) 6762 4555
Mobile: 0429 624 144
ALLIS CHALMERS HD16DP DOZER Just in for Dismantling, 16000H
Good Running Engine, Bull Tilt Blade, 14 Foot Stick Rake, Good
Undercarriage, Powershift Transmission, Carco Winch, All Parts
Available, Phone Brendan 02 6762 4466. S148. TA1064473. POA
JOHN DEERE 850 DOZER Dozer Just in for Dismantling, Angle Tilt
Blade with Twin Tilt Cylinders, Milano Ripper Assy, Good
Undercarriage All Round, 6.619 Engine in Pieces, All Parts Available,
Phone Brendan 02 6762 4466. S153. TA1068551.
POA
Allis Chalmers • Fiat Allis • Hanomag • Massey • JD Industrial
EMM-HH-5132462-B
Powered by
RESEARCH • COMPARE • BUY • SELL
AUSTRALIA’S #1
FARM MACHINERY MARKETPLACE *
NEW COMPULOAD
SCALES & PRINTER FOR
ON BOARD WEIGHING!
Made in Australia
Static weighing
Dynamic weighing
Full data management
Subtract function
Split load function
Can be fitted to all types of machines
Optional USB Downloading (6000 only)
Large LED backlight display
Fully automatic
Simple to use
Improves profitability
Fast accurate weighing
Optional printer available
www.TradeFarmMachinery.com.au
1800 285 277
www.compuload.com.au
AVAILABLE NATION-WIDE.

124 TradeFarmMachinery.com.au
KUBOTA
BE READY
During the bushfire season you can rely on
Kubota diesel generators for back-up power
Prepare for Bushfires | Lowboy 3 | GL9000
PET-FP-5188110-CS-310
+ 2-Pole/Single Phase
+ Capacity of 8kVA at 3000RPM
+ Super quiet operation
Speak to LK Diesel today.
+ Large capacity fuel tank (28L)
enables longer continuous
operation on a single tank
LKDiesel
52 Woodlands Drive
Braeside VIC 3195
Ph: 03 9588 6900
Web: lkdiesel.com.au

TradeFarmMachinery.com.au 125

PRIVATE Advertising
tradeplantequipment.com.au/sell 1300 362 272
SELL YOUR TRUCK
TRUMPF TRUSTORE 3030
2013, utomated storage system, C0030A0075. VIC. DIY1087948.
0428 148 234. $297,500
TRADETRUCKS.COM.AU/SELL OR CALL 1300 362 272
SYMONS 7FT MANTLES X2, .. QLD. DIY540212. 07 4950 5307.
0427 775 466. $13,200
SYMONS 7FT CONCAVE ., .. QLD. DIY540214. 07 4950 5307.
0427 775 466. $7,000 PLUS GST
CATERPILLAR D6 TRACK ROLLERS believed to fit a D6 Cat
dozer, set of 6. Please call 0427 775 466, .. QLD. DIY857141.
07 4950 5307. $1,200 + GST
SELL YOUR
TRUCK
GRACO XM PFP
Pump and container. Located in Western Sydney, ..
NSW. DIY960730.
0412 249 163.
$60,500
VISIT TRADETRUCKS.COM.AU/SELL
OR CALL 1300 362 272

PRIVATE Advertising
tradeplantequipment.com.au/sell 1300 362 272
TYRE HANDLER KOMATSU WA600-1 Plus all Controls.
Phone 0427 775 466, .. QLD. DIY1046192. 07 4950 5307.
$10,000 + GST
MINYU MS3624 JAW CRUSHER 36 x 24, 16 new plates &
4 cheek plates. Phone 0427 775 466, .. QLD. DIY1046184.
07 4950 5307. $40,000 + GST
KUE KEN 48 X 36 JAW CRUSHER on stand with feeder &
scalper, refurbished. 0427 775 466, .. QLD. DIY957170.
07 4950 5307. $500,000 + GST
SELL YOUR TRUCK
VISIT TRADETRUCKS.COM.AU/SELL
OR CALL 1300 362 272
FEEDER BELT 30X4 FT HYDRAULIC DRIVE Phone 0427
775 466, .. QLD. DIY1046189. 07 4950 5307. $10,000 + GST
WABCO 50B Dump truck x 2. Parts only. Good 1710
Cummins motors x 2. 0427 775 466, .. QLD. DIY496585.
07 4950 5307. $20,000 plus GST
MINYU MS4230 JAW CRUSHER good order, 4 spare jaw
plates & 2 cheek plates, .. QLD. DIY1046187. 07 4950 5307.
$55,000 = $50,000 + GST
BALL MILL 30ft x 6ft, .. QLD. DIY540209. 07 4950 5307.
0427 775 466. $45,000 PLUS GST
CATERPILLAR 992C 1985. Wrecking for parts, .. QLD.
DIY645033. 07 4950 5307.
POA
SAND DRYER Gas powered, on stand. Good order. 40T/HR,
7.5m x 1,600mm, working when pulled down, .. QLD.
DIY496592. 07 4950 5307. 0427 775 466. $35,000 plus GST
REDUCTION BOXES BREAKER DRIVERS fully rebuilt. 2 x
available - Phone 0427 775 466, .. QLD. DIY1046194.
07 4950 5307. $5,000 + GST Each
EL-JAY ROLLERCONE 54 CRUSHER with stand & electric
motor & starter, .. QLD. DIY1046181. 07 4950 5307.
$71,500 = $65,000 + GST
SELL YOUR TRUCK
VISIT TRADETRUCKS.COM.AU/SELL
OR CALL 1300 362 272

We
everywhere
Are Media publishes across six key platforms to maximise audience reach, engagement and response.
For more information, visit industry.aremedia.com.au

PRIVATE Advertising
tradefarmmachinery.com.au/sell 1300 362 272
Powered by
To select your advertising package, go to
tradefarmmachinery.com.au/sell
Each package includes 1 print issue in Farms & Farm
Machinery and until sold on tradefarmmachinery.com.au
ADVERTISEMENT DEADLINE
Issue: 401 Deadline: Fri 23/07/2021 5pm On Sale: Thu 12/08/2021
Issue: 402 Deadline: Fri 20/08/2021 5pm On Sale: Thu 09/09/2021
Value Pack
Premium Pack
Grand Pack
Jumbo Pack
Monster Pack
Mega Pack
$
35
Online Value
✔Standard ad
✔Ad listed until sold
Print Value
✔1/36 of a page
✔1 issue
✔Newsprint Colour
$
55
Online Value
✔Premium online ad
✔Ad listed until sold
Print Value
✔1/36 of a page
✔1 issue
✔Gloss Colour
$
85
Online Value
✔Premium online ad
✔Ad listed until sold
Print Value
✔1/18 of a page
✔1 issue
✔Newsprint Colour
$
130
Online Value
✔Premium online ad
✔Ad listed until sold
Print Value
✔1/8 of a page
✔1 issue
✔Gloss Colour
$
280
Online Value
✔Premium online ad
✔Ad listed until sold
Print Value
✔1/6 of a page
✔1 issue
✔Gloss Colour
$
750
Online Value
✔Premium online ad
✔Ad listed until sold
Print Value
✔1/2 of a page
✔1 issue
✔Gloss Colour
PRIVATE Advertising
tradefarmmachinery.com.au/sell 1300 362 272
PRIVATE Advertising
tradefarmmachinery.com.au/sell 1300 362 272
PREMIUM
NEWSPRINT
MEGA
GLOSS
MAKE AND MODEL 9 metre cut, quick release,
folding wings, V8 twin turbo, REG. STATE.
DIYXXXXXX. PH
$PRICE
MAKE AND MODEL 9 metre cut, quick release,
folding wings, V8 twin turbo, REG. STATE.
DIYXXXXXX. PH
$PRICE
MAKE AND MODEL 9 metre cut, quick release,
folding wings, V8 twin turbo, REG. STATE.
DIYXXXXXX. PH
$PRICE
MAKE AND MODEL 9 metre cut, quick release,
folding wings, V8 twin turbo, REG. STATE.
DIYXXXXXX. PH
$PRICE
MAKE AND MODEL 9 metre cut, quick release,
folding wings, V8 twin turbo, REG. STATE.
DIYXXXXXX. PH
$PRICE
GRAND
GLOSS
MAKE AND MODEL 9 metre cut, quick release,
folding wings, V8 twin turbo, REG. STATE.
DIYXXXXXX. PH
$PRICE
MAKE AND MODEL 9 metre cut, quick release,
folding wings, V8 twin turbo, REG. STATE.
DIYXXXXXX. PH
$PRICE
SELL YOUR
FARM
MACHINERY
MAKE AND MODEL 9 metre
cut, quick release, folding
wings, V8 twin turbo, REG.
STATE. DIYXXXXXX. PH
$PRICE
MAKE AND MODEL 9 metre
cut, quick release, folding
wings, V8 twin turbo, REG.
STATE. DIYXXXXXX. PH
$PRICE
MAKE AND MODEL 9 metre cut, quick release,
folding wings, V8 twin turbo, REG. STATE.
DIYXXXXXX. PH
$PRICE
MAKE AND MODEL 9 metre
cut, quick release, folding
wings, V8 twin turbo, REG.
STATE. DIYXXXXXX. PH
$PRICE
MAKE AND MODEL 9 metre cut, quick release,
folding wings, V8 twin turbo, REG. STATE.
DIYXXXXXX. PH
$PRICE
VISIT THE WEBSITE
OR CALL 1300 362 272
MAKE AND MODEL 9 metre
cut, quick release, folding
wings, V8 twin turbo, REG.
STATE. DIYXXXXXX. PH
$PRICE
MAKE AND MODEL 9 metre
cut, quick release, folding
wings, V8 twin turbo, REG.
STATE. DIYXXXXXX. PH
$PRICE
VALUE
NEWSPRINT
MAKE AND MODEL 9 metre
cut, quick release, folding
wings, V8 twin turbo, REG.
STATE. DIYXXXXXX. PH
$PRICE
MAKE AND MODEL
9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. Phone
$PRICE
MAKE AND MODEL
9 metre cut, quick release,
folding wings, V8 twin turbo,
REG. STATE. DIYXXXXXX. Phone
$PRICE
MONSTER
GLOSS
MAKE AND MODEL
9 metre cut, quick release,
folding wings, V8 twin turbo,
REG. STATE. DIYXXXXXX. Phone
$PRICE
JUMBO
GLOSS
MAKE AND MODEL
9 metre cut, quick release,
folding wings, V8 twin turbo,
REG. STATE. DIYXXXXXX. Phone
$PRICE
1 item per ad space regardless of ad size
The publisher accepts no responsibility or liability for any losses incurred by a buyer responding to an advertisement in this magazine. Buyers are solely responsible for their own negotiations and transactions with advertisers. Are Media Pty Limited advises
buyers beware of negotiating by email only; of paying deposits to private advertisers for goods unseen; of transferring money (for example via Western Union) interstate or overseas. Buyers should contact Are Media Pty Limited customer services on 1300 362
272 if they suspect an advertisement may be fraudulent. In the event that a buyer suffers financial loss as a result of responding to a private advertisement in this publication Are Media Pty Limited (The Publisher) shall not be held liable or responsible.
1300 362 272 privateads@bauertrader.com.au
tradefarmmachinery.com.au/sell

Tractors, farm machinery & materials handling equipment for sale
>> INSIDE
A Load to Like
Strautmann Giga-Vitesse CFS 3602
Great and Small
EuroTier prize winnners
Now offered as a ROPS model,
the Kubota M5-1 tractor series
offers higher horsepower at lower
engine speeds >> Page 14
100-200hp Tractors
18 PAGE SPECIAL FEATURE
Issue 393 > $7.95 > On sale 31/12/20
$63,800 $180,000 $43,450 NEG
$297,000
2017 Hustler SF1750. 17.5 cube, side feed silage
wagon, many options • VIC 0437 136 209 draper front, comb trailer • NSW 0429 938 300 Perkins turbo 105hp • TAS 0439 304 542 Leith trailer, Exc cond • QLD 0409 250 888
’08 CLAAS 580R Combine. Honeybee flex 1993 Delvano STM. Self-prop sprayer, 4WD, ’11 CASE IH 7120. 45ft 2152 Macdon, 4 axle
items for sale
Trucks, utes and
33,625+ in print & online 5,850+ 4x4s now for sale!
FFM 393 front cover.indd 1
11/12/2020 1:25:11 PM
4/3/20, 2:48 pm
Page 1 of 1
SEARCH
4/3/20, 2:48 pm
Page 1 of 1
NEW AND USED TRACTORS FOR SALE IN
AUSTRALIA BAUER TRADER MEDIA
Find new and used Tractors for sale with Farms & Farm Machinery
magazine
NEXT
SEARCH
Page 1 of 188 (1,875 results)
Sort by Premium Ads
list map
NEW AND USED TRACTORS FOR SALE IN
AUSTRALIA
Find new and used Tractors for GET sale ALERTS
with Farms & Farm Machinery
magazine
CASE IH MAXXFARM 25 TRACTOR NEXT
$19,750
Page 1 of 188 (1,875 results)
Sort by Premium Ads
list map
GET ALERTS
CASE IH MAXXFARM 25 TRACTOR
$19,750
Tractors / Tractors / 0-40hp
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD
FEL: YES Rated Engine Power - hp: 28
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380
hours indicated, with books, approximately 28 horsepower, AS NEW *price
includes gst
Mclaren Vale, SA
Tractors / Tractors / 0-40hp ! CALL 08 7007 6847
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD
FEL: YES Rated Engine SAVE Power - ITEM hp: 28
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380
hours indicated, with books, approximately 28 horsepower, AS NEW *price
includes gst
EMAIL SELLER
Mclaren Vale, SA
KUBOTA 8540
! CALL 08 7007 6847
$22,000
SAVE ITEM
EMAIL SELLER
KUBOTA 8540
$22,000
Tractors / Tractors / 40-100hp
RefCode: TA994405 Class: 40-100hp Drive Type: FWA
Number Cylinders/cc: 4 Rated Engine Power - hp: 85
Usage Hours: 5,800
Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives
very well. Xgoverment . Inspection most welcome
Stonyford, VIC
Tractors / Tractors / 40-100hp
! CALL 03 8547 8644
RefCode: TA994405 Class: 40-100hp Drive Type: FWA
Number Cylinders/cc: 4 Rated Engine Power - hp: 85
Usage Hours: 5,800 SAVE ITEM
Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives
very well. Xgoverment . Inspection most welcome
EMAIL SELLER
Stonyford, VIC
KUBOTA L1-24DT TRACTOR WITH 4 IN 1
! CALL 03 8547 8644
FEL 28HP
$21,450
SAVE ITEM
EMAIL SELLER
KUBOTA L1-24DT TRACTOR WITH 4 IN 1
FEL 28HP
$21,450
Tractors / Tractors / 0-40hp
RefCode: TA757218 Class: 0-40hp Drive Type: 4WD
FEL: YES Number Cylinders/cc: 3/1462cc
Rated Engine Power - hp: 28
KUBOTA L1-24DT - 28hp 4WD DIESEL. The Kubota L1-24DT offers quality
Japanese small tractor engineering. Its smooth, direct injection diesel engine is
coupled with a higher specification shuttle shift transmission. With forward and
reverse at your fingertips, this machine is the front end loader specialist.
Emu Plains, NSW
Tractors / Tractors / 0-40hp
! CALL 02 8315 0078
RefCode: TA757218 Class: 0-40hp Drive Type: 4WD
FEL: YES Number Cylinders/cc: 3/1462cc
Rated Engine Power - hp: 28SAVE ITEM
KUBOTA L1-24DT - 28hp 4WD DIESEL. The Kubota L1-24DT offers quality
Japanese small tractor engineering. Its smooth, direct injection diesel engine is
coupled with a higher specification EMAIL shuttle SELLER
shift transmission. With forward and
reverse at your fingertips, this machine is the front end loader specialist.
Emu Plains, NSW
KIOTI RX8030 FEL
! CALL 02 8315 0078
$42,995
SAVE ITEM
EMAIL SELLER
KIOTI RX8030 FEL
$42,995
Tractors / Tractors / 40-100hp
RefCode: TA816304 Class: 40-100hp Drive Type: FWA
Rated Engine Power - hp: 80
New Kioti RX8030 front wheel assist tractor 12F x12R shuttle transmission
linkage and remotes, Loader with 4in1 bucket Cheap power handy tractor
$42995 Special 1 unit only
Wooroolin, QLD
Tractors / Tractors / 40-100hp ! CALL 07 3073 8164
RefCode: TA816304 Class: 40-100hp Drive Type: FWA
Rated Engine Power - hp: 80SAVE ITEM
New Kioti RX8030 front wheel assist tractor 12F x12R shuttle transmission
linkage and remotes, Loader with 4in1 bucket Cheap power handy tractor
$42995 Special 1 unit only EMAIL SELLER
Wooroolin, QLD
2016 CASE IH MAXXUM 125
! CALL 07 3073 8164
$138,000
SAVE ITEM
EMAIL SELLER
2016 CASE IH MAXXUM 125
$138,000
Tractors / Tractors / 100-150hp
RefCode: TA964942 Class: 100-150hp Drive Type: 4WD
FEL: YES Rated Engine Power - hp: 127
Usage Hours: 515
CASE MAXXUM 125 4WD 127 HP 6 CYLINDER AIR CONDITIONED WITH
SUSPENSION CABN 16 X 16 SEMI POWERSHIFT TRANS PLUS MANY
EXTRAS ,FRONT END LOADER 4IN1 WITH 8FT HYD ANGLE TILT BLADE
HYD POST HOLE DIGGER 2...
North St Marys, NSW
Tractors / Tractors / 100-150hp
! CALL 02 6171 3260
RefCode: TA964942 Class: 100-150hp Drive Type: 4WD
FEL: YES Rated Engine Power - hp: 127
Usage Hours: 515 SAVE ITEM
CASE MAXXUM 125 4WD 127 HP 6 CYLINDER AIR CONDITIONED WITH
SUSPENSION CABN 16 X 16 SEMI POWERSHIFT TRANS PLUS MANY
EXTRAS ,FRONT END LOADER EMAIL 4IN1 WITH SELLER 8FT HYD ANGLE TILT BLADE
HYD POST HOLE DIGGER 2...
North St Marys, NSW
AGMAX SL210HD HEAVY DUTY SLASHER
! CALL 02 6171 3260
7' - 75HP GEARBOX
$5,690
SAVE ITEM
EMAIL SELLER
AGMAX SL210HD HEAVY DUTY SLASHER
7' - 75HP GEARBOX
$5,690
Tractors / Tractor Attachments
RefCode: TA930462
AGMAX 7' heavy duty slasher. Suits tractors 85-120hp, 2 year warranty. Clear
dense bush blocks and slash through heavy grass or woody vegetation. Built
tough for Australian conditions.
Thomastown, VIC
! CALL 03 9998 4680
Tractors / Tractor Attachments
RefCode: TA930462 SAVE ITEM
AGMAX 7' heavy duty slasher. Suits tractors 85-120hp, 2 year warranty. Clear
dense bush blocks and slash through heavy grass or woody vegetation. Built
tough for Australian conditions. EMAIL SELLER
Thomastown, VIC
MERLO P 27.6
! CALL 03 9998 4680
$89,900
SAVE ITEM
EMAIL SELLER
MERLO P 27.6
$89,900
BAUER TRADER MEDIA
Tractors / Tractors / 0-40hp
RefCode: DIY939915 Class: 0-40hp Drive Type: 4WD
Number Cylinders/cc: 3,300/4 Rated Engine Power - hp: 74
Usage Hours: 0
Compact Italian Made Telehandler - BOOM REACH OF 6M - Hydrostatic
Transmission. Fuel Efficient & Fast - 40 km/h - Largest Cab on a Compact
Telehandler. - 3 Cly. Turbo Engine.
Mildura, VIC
Tractors / Tractors / 0-40hp ! CALL ** **** 1004
RefCode: DIY939915 Class: 0-40hp Drive Type: 4WD
Number Cylinders/cc: 3,300/4 SAVE Rated ITEMEngine Power - hp: 74
Usage Hours: 0
Compact Italian Made Telehandler - BOOM REACH OF 6M - Hydrostatic
EMAIL SELLER
Transmission. Fuel Efficient & Fast - 40 km/h - Largest Cab on a Compact
Telehandler. - 3 Cly. Turbo Engine.
Mildura, VIC
CASE IH 340 MAGNUM CVT
! CALL ** **** 1004
$175,000
SAVE ITEM
EMAIL SELLER
CASE IH 340 MAGNUM CVT
$175,000
Tractors / Tractors / 300-plus hp
RefCode: TA991597 Class: 300-plus hp
Drive Type: MFWD Usage Hours: 4,709
340 MAGNUM CVT
St George, QLD
Tractors / Tractors / 300-plus ! CALL hp 07 3171 1750
RefCode: TA991597 Class: 300-plus hp
Drive Type: MFWD Usage SAVE Hours: ITEM 4,709
340 MAGNUM CVT
EMAIL SELLER
St George, QLD
2018 DEUTZ-FAHR AGROTRON 6.00
! CALL 07 3171 1750
AGROTRON 6135G
$129,800
SAVE ITEM
EMAIL SELLER
2018 DEUTZ-FAHR AGROTRON 6.00
AGROTRON 6135G
$129,800
Issue 400 index
Agco Australia Limited (VIC)............................................................. 132
All Diesels (QLD).................................................................................. 72
Antonio Carraro Oceania Pty Ltd (NSW) ............................................ 11
Brisbane Mini Excavators (QLD)......................................................... 23
BYPY Transmissions (VIC)................................................................... 49
Intersales Temora (NSW) ............................................................79
Lyndoch Motors (SA) ..................................................................82
Rocky River Ag Services (SA)......................................................80
TTMI (VIC) ....................................................................................78
Claas Harvest Centre Colac (VIC)....................................................... 80
Cobram Farm Equipment (VIC) .......................................................... 82
Daken ASV (NSW)............................................................................ 5, 32
Dieci Australia (NSW) .......................................................................... 26
Echuca Rural (VIC) .............................................................................. 74
EL-Gra Engineering (NSW) ................................................................. 31
FAE Australia Pacific Pty Ltd (VIC) ...................................................... 13
Farmgard Pty Ltd (VIC)........................................................................ 47
G & J East Kadina (SA)......................................................................... 84
Geronimo Farm Equipment Pty Ltd (NSW) ........................................ 19
Goldacres Holdings Pty Ltd (VIC)........................................................ 35
Grainrite (VIC)...................................................................................... 43
Greg Allan Farm Machinery (VIC)....................................................... 44
Hicks Machinery (VIC)......................................................................... 83
Inlon Pty Ltd (NSW) ............................................................................... 7
Jadan Enterprises (NSW) .................................................................... 55
JNR Engineering (VIC) ......................................................................... 21
John Berends Implements Pty Ltd (VIC)............................................. 25
John Deere Tractors (NZ) ...................................................................... 9
Korea Trade Commission (KOTRA Sydney) (NSW) ............................ 12
Loxton Engineering Pty Ltd (SA)......................................................... 83
Makin Traks Construction Equipment Solutions (QLD)...................... 33
Massaro Motors (VIC)......................................................................... 74
Michaels of Donald Pty Ltd (VIC)........................................................ 81
Muller Fabrications (QLD)................................................................... 51
PFG Australia Pty Ltd (VIC)...........................................................COVER
Pivot Irrigation Australia Pty Ltd (SA) ................................................. 83
Poole & Jackson Pty Ltd (VIC)............................................................. 82
Powerace Pty Ltd (WA)....................................................................... 55
Private Advertising Coupon ............................................... 129
Rebel Equipment (NSW) ..................................................................... 48
Robinsons of Bookham (NSW) ........................................................... 85
Rocca Industries (QLD) ....................................................................... 53
Rural Wrecking Co. (NSW)................................................................... 75
Sammut Agricultural Machinery Pty Ltd (NSW)............................... 131
Smallaire (VIC)..................................................................................... 84
Top Mark Machinery (SA) ................................................................... 83
UHI Machinery (NSW) ......................................................................... 59
Veldonas (VIC)..................................................................................... 68
W & P Pumps (VIC).............................................................................. 37
WA Farmers (WA) ............................................................................... 39
Wrights Tractor Sales & Service (SA).................................................. 73
Issue 340 index
A One Lift Truck Services (NSW) ................................................. 111
AAA Machinery (VIC) ........................................................................ 122
Brisbane Welder Repairs & Rentals (QLD) ................................. 122
Allis Chalmers Australia (NSW)......................................................... 123
Atlas Weighing (NSW) ....................................................................... 123
Diesel Engines Pty Ltd (QLD) ............................................................ 113
Forklift Traders (NSW) ....................................................................... 109
Formidable Forklifts Pty ltd (VIC)...................................................... 108
FW & RB Crighton Pty Ltd (NSW)...................................................... 112
Hare & Forbes (SYDNEY) (NSW) ....................................................... 116
Hi-Reach Rentals Australia Pty Ltd (QLD)......................................... 118
Liftek Australia (NSW) ....................................................................... 121
LK Diesel Service Pty Ltd (VIC).......................................................... 124
NKF Group (QLD)............................................................................... 114
Phil Hunt Parts (NSW) ....................................................................... 123
PR Power Pty Ltd (WA) ..................................................................... 125
Price & Speed P/L (NSW).................................................................. 119
Skyreach Pty Ltd (QLD) ..................................................................... 110
Thomas Manufacturing (QLD) .................................................... 120
Powered by
RESEARCH • COMPARE • BUY • SELL
AUSTRALIA’S #1
FARM MACHINERY MARKETPLACE *
BUY
More than 40,000 tractors, spreaders, harvesters, hay
tools, feeders, sprayers, trailers, and attachments, and
other parts and accessories currently listed for sale
SELL
Unlimited stock listings on
TradeFarmMachinery.com.au for
just $360 per month
* Based on stock items for sale as at March 2020
TERMS AND CONDITIONS
Acceptance of all advertising is subject to review and approval by management, the publisher reserves the right to edit, revise or reject any
advertisements for any reason. The Publisher’s liability for damages resulting from errors in any advertising that it publishes or from its failure to
publish any advertisement that it has agreed to publish shall be limited to the amount it actually received in consideration for its agreement to
publish the advertisements in question. The Publisher shall not be responsible for any special, incidental or consequential damages suffered by
any party resulting from its errors and/or omissions. The advertiser accepts all liability for the content of all advertising supplied by it and agrees to
defend, indemnify and hold harmless the Publisher from any and all claims. All photographs become the property of Are Media Pty Ltd. For dealer
and commercial advertising these terms and conditions should be read in conjunction with the terms, conditions, warranties and indemnities
published in our dealer and commercial rate cards.
The publisher accepts no responsibility or liability for any losses incurred by a buyer responding to an advertisement in this magazine. Buyers are
solely responsible for their own negotiations and transactions with advertisers. Are Media Pty Ltd advises buyers beware of negotiating by email
only; of paying deposits to private advertisers for goods unseen; of transferring money (for example via Western Union) interstate or overseas.
Buyers should contact Are Media customer services on 1300 362 272 if they suspect an advertisement may be fraudulent. In the event that a
buyer suffers financial loss as a result of responding to a private advertisement in this publication Are Media Ltd (The Publisher) shall not be held
liable or responsible.
,!3BD0A6-aaejdg!:k;L
OPTIONS
galore
www.TradeFarmMachinery.com.au
PRIVACY NOTICE
This issue of Farms and Farm Machinery is published by Are Media Pty Ltd (Are Media).
Are may use and disclose your information in accordance with our Privacy Policy, including to provide you with your requested products or services
and to keep you informed of other Are publications, products, services and events. Our Privacy Policy is located at www.Are-media.com.au/privacy/
It also sets out on how you can access or correct your personal information and lodge a complaint. We disclose your personal information offshore
to our joint venture partners, service providers and agents. It is not practicable to specify all countries to which we may disclose your personal information.
The countries your personal information will be disclosed to include New Zealand, the USA and the Philippines. In addition, this issue may
contain Reader Offers, being offers, competitions or surveys. Reader Offers may require you to provide personal information to enter or to take part.
Personal information collected for Reader Offers may be disclosed by us to service providers assisting Are in the conduct of the Reader Offer and to
other organisations providing special prizes or offers that are part of the Reader Offer. An opt-out choice is provided with a Reader Offer. Unless you
exercise that opt-out choice, personal information collected for Reader Offers may also be disclosed by us to other organisations for use by them to
inform you about other products, services or events or to give to other organisations that may use this information for this purpose.
If you require further information, please contact Are Media’s Privacy Officer either by email at privacyofficer@aremedia.com.au or mail at Privacy
Officer Are Media Pty Ltd, 54 Park Street, Sydney NSW 2000.
www.aremedia.com.au n DEALER ADVERTISING 1300 362 355 n PRIVATE ADVERTISING 1300 362 272

SAMMUT
AGRICULTURAL MACHINERY
All the latest gear and greatest innovations
Phone: (02) 4579 6511 Mobile: 0414 423 680
Fax: (02) 4579 6522 Email: sales@sammut.com.au
67 Joshua Road, Freemans Reach NSW 2756
TOSCANO MULCHER
H/D construction
Double or single side linkage
Optional hydraulic side shift
Sizes from 1.5 to 4mtr
S359. TA1025453.
Price from $5,000 + GST
SAMMUT TRUCK TRAYS
H/D Australian made
3mm or 5mm floor
Custom build
Chassis modifications
New and used trucks available. S360. TA1025472.
PRICE FROM $8,000 + GST
SAMMUT HARDOX TIPPER BODIES
H/D build. One piece sides, 2 way gate
Optional well hoist or twin under body. Optional drop sides
Custom build. Colour of choice
Sand blasted and finished in 2-pac
New and Used trucks available. S362. TA1025485.
From $25,000 + GST
UNITED IMPLEMENTS BOX GRADER
Made in USA
Heavy duty build
Hydraulic lift wheels
Hydraulic angle adjustment
1800mm to 3600mm. S363. TA1025493.
Price from $4,800 + GST
SAMMUT GEARMASTER TURF MOWER
H/D Australian made
Full gear drive, Stainless deck
75 HP gearboxes, 3pl or trailing
Sizes from 1.5 mtr to 12mtr. S364. TA1025498.
Price from $15,000 + GST
SAMMUT MILL MUD SPREADERS
H/D Australian made
Full hydraulic drive, Single or 3 row
Front feed, Single or double axle
Optional rear spinners
Sizes from 8m3 to 30m3. S365. TA1025500.
Price from $28,000 + GST
SAMMUT ORCHARD / VINEYARD SPREADER
H/D Australian build
Front or rear delivery. Sizes from 2m3 to 18m3
Optional telescopic conveyor, Optional end rotor or end spinner
Custom built to suit your requirements. S366. TA1025523.
Price from $28,000 + GST
SAMMUT SPREADERS
H/D Australian made
Full hydraulic drive
We can custom build. Optional front feed
Optional side delivery. Chain or belt floor
Sizes from 2m3 to 30 m3. S367. TA1025524.
Price from $18,000 + GST
FIMAKS VERTICAL FEED MIXERS
Hardened bin and floor. H/D Comer Italian gearboxes
Sizes from 3m3 to 30m3. Scales, In cab controls
Optional folding conveyor with optional length
Reduction box. S371. TA1025537.
From $25,000 + GST
TOSCANO STONE BURIER
Extra heavy duty
Hydraulic lift roller
Gear drive
Anti-pan blades
2200mm to 3200mm. S369. TA1025532.
Price from $16,900 + GST
TOSCANO SPEED DISC
Heavy duty
Hydraulic lift crumble roller
560mm discs
3pl and trailing
2.5 mtr to 6mtr (trailing ). S368. TA1025525.
Price from $11,000 + GST
For more info please visit us at www.sammut.com.au
FIMAKS MUCK SPREADERS
From 5 tonne to 30 tonne
Heavy Duty conveyor chain, Slurry door, In cab controls
Twin vertical beaters with bottom spinner
Suitable for all your hard to spread products etc
Wet cow manure, mulch, green waste etc. S373. TA1025543.
From $25,000 + GST
FFM-FP-5190448-A

TACKLE
ANY JOB.
MF 5700 S SERIES 100 – 130 HP
The MF 5700 S Series tractors have the versatility to get it all done. With upgraded design, a high performance driveline,
high levels of comfort and reliability at its core the MF 5700 S Series is the ultimate all-rounder for a more productive working
day. Now is the time to secure your new Massey Ferguson 5700 S Series.
CONTACT YOUR LOCAL MASSEY FERGUSON DEALER TODAY
MASSEYFERGUSON.COM.AU | FREECALL 1800 802 914
A world of experience. Working with you.