IATA Aircraft Lease Guidance

Guidance Material and Best Practices for Aircraft Leases
3.2.7 Inspection Report
The Inspection Report traditionally consists of the following parts:
●
●
●
●
●
Aircraft General Data, such as Date of manufacturing, S/N, L/N, Total FH and FC
Aircraft Weight and structural data like MTOW, MLW, etc.
Airframe Maintenance status. When and where the latest major Heavy Maintenance Visits (HMV) have
been done
The dates of the next HMVs in accordance with current operator’s Maintenance program.
Aircraft operational status:
o
o
Landing category
Navigation Performance, as RNP capability
o ETOPS category (90, 120, 180, 240)
●
Engines status:
o
o
o
o
o
o
o
Date of Last Shop visit
Lowest LLP life remaining or LLP status
Engine TSN / CSN at the last shop visit
Completion date of last Performance Restoration shop visit
Engine TSN / CSN at the last Performance Restoration shop visit
Test Cell EGT margin at Performance Restoration shop visit
Current Operating Thrust
●
APU status:
o
o
o
o
o
o
o
o
Manufacturer
Part Number
Date of manufacture
APU TSN / CSN
Completion Date of Last Hot Section Inspection (HSI) / Overhaul
APU TSN / CSN at Hot Section Inspection (HSI) / Overhaul
Cycles remaining to 1 st LLP Limiter (if applicable)
APU Annual Utilization (FH/FC)
● Landing Gear status :
o
o
Gear TSN / CSN
Date of Last Overhaul
30 4 th Edition 2017