IATA Aircraft Lease Guidance

Annex II: Typical Redelivery Records
F 022 Certified Engine component listing including serialized line replaceable units as
tracked by redelivery operator (if not already supplied in B015). Including
TSN/CSN/TSO/CSO (if available).
G Item APU
G 001 (i) Certified Total Time in Service of APU (including current Hours and Cycles) (ii)
Certified statement of ratio between Aircraft Hours to APU Hours)
G 002 Certified Status of APU Airworthiness Directives (including applicability status and
statement as to method of compliance e.g. modified/repaired/inspected).
G 003 Certified status of incorporated APU Manufacture Service Bulletins.
G 004 APU Log Book and/or Master record of Installation & Removals (as applicable).
G 005 All APU Shop Visit Reports back to last Heavy SV, and if available Shop Visit Reports
prior to last Heavy SV (SV Reports may not include engine DFP records and shop task
cards).
G 006 Certified Life Limited Parts Listing indicating hour or cycle limit, hours or cycles
consumed since new, and hours or cycles remaining, and if applicable the individual
total hour or cycle substantiation record for each Life Limited Part since manufacture.
G 007 Operational Performance Test (on-wing) - certified maintenance task card (if
applicable)
G 008 Last Borescope report ((including video), if required by lease).
H Item Component Records
H 001 Authorized Release Certificate for each Time Controlled Component per OEM
classification (including last overhaul / repair / shop test report as applicable).
H 002 Authorized Release Certificate for each operator tracked components (requirement to
produce related component certificate is subject to lease agreement or Redelivering
Lessee’s regulatory authority oversight).
I Item Landing Gears (Separate folder for each respective Landing Gear)
I 001 Manufacturer report of Life Limited Parts installed at Manufacture (for installed
Landing Gear), including Part Number and Serial Number.
I 002 Authorized Release Certificate from last Overhaul of each major Landing Gear
Assembly.
I 003 Certified status of Life Limited Parts of each Landing Gear showing cycle limit, cycles
consumed since new, and cycles remaining.
I 004 Last Overhaul Shop Report
I 005 Individual total cycle substantiation data for each Life Limited Part (as identified by
applicable OEM document) since manufacture.
J
Item
Manuals (as applicable at End of Lease (EOL) in then current format and redacted
as appropriate to protect operator proprietary data). Manuals which can be
sourced from an OEM directly (e.g. AirbusWorld, MyBoeingFleet) are excluded
J 001 Airplane Flight Manual (including all supplements acceptable to the Aircraft state of
design)
J 002 Wiring Diagram Manual
4 th Edition 2017 83