TP-link Extender Setup : tplinkrepeater.net

FAQs
1. What if I am unable to access www.tplinkrepeater.net for TP-link repeater setup?
You must ensure that you have an active internet connection to access TP-link login via
tplinkrepeater.net.
Sometimes, the loose coactions might cause the problem, so you must ensure the connections are
proper.
Else, you must use another web browser to access tplinkreptear.net login.
2.How can I know if my TP-link extender is working actively?
The signal LED lights on the TP-link extender would give you indication about the proper configuration
of your TP-link range extender successfully. The signal light must be solid on and stably lit.
3.How to log into the TP-link extender?
You must use tplinkrepeater.net web address to log into the web management page of the PT-link
range extender from a web browser and use the default TP-link login details for login.
4.What is the access point mode used for TP-link extender setup?
When the TP-link extender is set up as an access point or AP, it broadcasts an established wireless
network in the specific area creating a wifi hotspot. For this, you must set up the TP-link extender in
access point mode and not repeater or extender mode. Also, it should be established in a hardwired
cable connection.
5.What if the internet network speed is slow after TP-link extender setup?
●
●
●
You must avoid using the same SSID for TP-link extender as well as source router and create a
new SSID separately.
Status of the TP-link extender’s wifi signal should be used for positioning the extender until
weak LED signal bars go away and stable light is on.
Check the wifi speed using the speed test to check if the TP-link extender’s signal strength is
good. Else, you must reposition the extender in the three meters range of the router while
TP-link extender setup.