TP-link Extender Setup : tplinkrepeater.net
How Do I Setup TP-Link Extender? TP-link extender setup to configure the extender on repeater or extender mode requires installing the extender and setting it up by any of the following three ways to connect the TP-link wifi extender to the source router. TP-link extender setup could be possibly done by three methods: 1. over Tether app 2. over the web browser via tplinkrepeater.net login 3. over Wifi Protected Setup (WPS)
How Do I Setup TP-Link Extender?
TP-link extender setup to configure the extender on repeater or extender mode requires installing the extender and setting it up by any of the following three ways to connect the TP-link wifi extender to the source router. TP-link extender setup could be possibly done by three methods:
1. over Tether app
2. over the web browser via tplinkrepeater.net login
3. over Wifi Protected Setup (WPS)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Steps to TP-link extender setup
1. Connect the TP-link wifi extender to the power source.
2. You must position the TP-link extender within the close proximity and wireless
coverage/range of your source router.
3. Turn on the TP-link extender.
4. Allow it to boot up and start as indicated by its status power LED.
5. Take your mobile phone and access its wifi settings.
6. Connect to the TP-link extender’s default wifi network name/SSID
7. Select the default SSID from the displayed list under available wifi connections.
8. When prompted, type the default security key for the TP-link extender SSID.
9. Once connected, launch the Tether app on your phone.
10. Scan and search for available wifi network SSIDs.
11. Select your source router’s SSID by highlighting and clicking on it.
12. Connect to the source router’s SSID by entering its security key.
13. The default SSID for your extended network (through TP-link extender) would be the
same as the SSID of your source router.
14. The TP-link wifi range extender would repeat the Wi-Fi signals signalling from the router.
15. Connect your client devices to the TP-link extender’s extended wifi network. This
completes TP-link extender setup via Tether app.
TP-link extender setup from web browser using tplinkrepeater.net login
1. Connect the TP-link wifi extender to the power source.
2. You must position the TP-link extender within the close proximity and wireless
coverage/range of your source router.
3. Turn on the TP-link extender.
4. Allow it to boot up and start as indicated by its status power LED.
5. Connect your computer to the TP-link extender’s default wifi settings.
6. Access the wireless utility manager and launch it on your computer.
7. Connect to the TP-link extender’s default wifi network name/SSID from your computer.
8. Select the default SSID from the displayed list under available wifi connections.
9. When prompted, type the default security key for the TP-link extender SSID.
10. Open a web browsing window on your computer connected to extender’s wifi.
11. Login to TP-link login page through TP-link default login web address tplinkrepeater.net.
12. When prompt shows, assign a TP-link extender login password for securing login access.
13. The TP-link extender would search for the available wifi name.
Change language