ATH-Heinl Bedienungsanleitung Single Lift 25M

More documents

Info

8.0 INSPECTION LOG This inspection manual (including log) is an important part of the operating instructions and product. !!!PLEASE STORE CAREFULLY!!! Check The product must be checked after completion of the installation, handover, if necessary briefing and then regularly in accordance with the applicable regulations and legal provisions in the country of operation by a suitable and approved company or facility. In the case of changes or extensions to the product type, an additional inspection book must be maintained and accepted. Scope of Inspection In addition to perfect function, cleanliness and maintenance requirements, it is vital that the safety-relevant components of the entire system are checked. Technical Data - Please refer to the enclosed operating instructions. Nameplate - Make a note of all the data below - Manufacturer & type of mounting materials used: ® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-09 Manufacturer ATH-Heinl GmbH & CO.KG - 43 -
8.1 Installation and Handover Log Site: Company: Street: Town: Country: Device / system: Manufacturer: Type / model: Serial no.: Year of construction: Responsible retailer: The above product has been assembled, checked for function and safety and put into operation. Installation was carried out by: the operator the technical expert The operator confirms that the product type has been set up correctly, that he/she has read and understood all information contained in these operating instructions and the log, and that he/she keeps this documentation accessible to the instructed operator at all times. The operator confirms that after installation and commissioning by a person trained by the manufacturer or an authorised dealer (expert), instruction in the function, handling, safety-relevant specifications, maintenance and care of the machine has taken place, documents, information and specifications of the machine have been provided and the product is working properly. IMPORTANT NOTES: IF THE ABOVEMENTIONED POINTS ARE NOT FULFILLED, THE WARRANTY CLAIM IS EXCLUDED: The warranty is only valid in conjunction with compliance and evidence of proper assembly, handover, and if necessary training, as well as yearly maintenance carried out by an expert authorised by the manufacturer. The interval between services must not exceed 12 months. In case of non-standard use or multi-shift or seasonal use, a bi-annual inspection and maintenance must be arranged. Warranty claims are only recognised if all points in the log and operating instructions have been met, the claim is asserted immediately after detection and this log is sent to the manufacturer along with the maintenance and service logs. Further specific information about the warranty, such as scope, requirements and specifications, are described in the operating instructions and must be observed. Damages and complaints caused by improper handling; failure to maintain and service; use of unsuitable or unspecified assembly, operating, maintenance or service products; mechanical damage; intervening in the unit without consultation or by an unauthorised expert are excluded from the warranty. For systems that have not been installed by an authorised expert, the warranty is limited by agreement of the manufacturer to the provision of the necessary spare parts. Expert name and company stamp if necessary, number and name of retailer Date and expert signature Operator name and company stamp Date and operator signature ® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-09 Manufacturer ATH-Heinl GmbH & CO.KG - 44 -
Page 1 and 2:
Deutsch English Polskie Français
Page 3 and 4:
Inhalt 1.0 EINLEITUNG .............
Page 5 and 6:
1.2 Beschreibung Abdeckung oben Um
Page 7 and 8:
1.3 Bedienung Taster Heben um Hebeb
Page 9 and 10:
Sicherheitshinweise 1. Achten Sie a
Page 11 and 12:
Traglastverteilung Q Gesamtgewicht
Page 13 and 14:
® Urheberrecht ATH-Heinl GmbH & CO
Page 15 and 16:
2.3 Lieferumfang Transportbox mit:
Page 17 and 18:
2.5 Befestigung Hierbei sind die al
Page 19 and 20:
2.9 Montage Diese Anleitung ist nic
Page 21 and 22:
Installation des Netzteils Setzen S
Page 23 and 24:
Anschluss der Hydraulikleitung Acht
Page 25 and 26:
2.10 Abschlussarbeiten Prüfen Sie
Page 27 and 28:
Kontrolle des Endschalters für ein
Page 29 and 30:
3.0 BETRIEB 3.1 Betriebsanweisung F
Page 31 and 32:
4.0 WARTUNG Um einen sicheren Betri
Page 33 and 34:
4.3 Hinweise Die Maschine ist, unab
Page 35 and 36:
Probleme beim Senken Sicherheitsras
Page 37 and 38:
4.7 Entsorgung • Entfernen Sie di
Page 39 and 40:
6.0 ANHANG 6.1 Pneumatik-Schaltplan
Page 41 and 42:
6.3 Hydraulik-Schaltplan 1 Ölfilte
Page 43 and 44:
7.1 Umfang der Produktgarantie •
Page 45 and 46: 8.1 Aufstellungs- und Übergabeprot
Page 47 and 48: 8.3 Sichtprüfung (Befugte Sachkund
Page 49 and 50: Sichtprüfung (Befugte Sachkundige
Page 51 and 52: 9.0 NOTIZEN ® Urheberrecht ATH-Hei
Page 53 and 54: www.ath-heinl.de ATH-Heinl GmbH & C
Page 55 and 56: Contents 1.0 INTRODUCTION .........
Page 57 and 58: 1.2 Description Hat To cover the co
Page 59 and 60: 1.3 Operation Push button lifting (
Page 61 and 62: Safety instructions 1. Check the co
Page 63 and 64: Load distribution Q Total weight of
Page 65 and 66: ® Copyright ATH-Heinl GmbH & Co. K
Page 67 and 68: 2.3 Delivery Contents Transport box
Page 69 and 70: 2.5 Fixing General and local regula
Page 71 and 72: 2.9 Assembly These instructions are
Page 73 and 74: Installation Of Power Unit Place th
Page 75 and 76: Hydraulic line connection Take care
Page 77 and 78: 2.10 Completion of Work Before comm
Page 79 and 80: Installation of front cover Front c
Page 81 and 82: 3.0 OPERATION 3.1 Operating Instruc
Page 83 and 84: 4.0 MAINTENANCE The user must maint
Page 85 and 86: 4.3 Notes Regardless of the level o
Page 87 and 88: Lowering Problems Check cable conne
Page 89 and 90: 4.7 Disposal • Remove the air and
Page 91 and 92: 6.0 APPENDIX 6.1 Pneumatic circuit
Page 93 and 94: 6.3 Hydraulic circuit diagram 1 Oil
Page 95: 7.1 Scope of the Product Warranty
Page 99 and 100: 8.3 Visual inspection (authorised e
Page 101 and 102: Visual inspection (authorised exper
Page 103 and 104: 9.0 NOTES ® Copyright ATH-Heinl Gm
Page 105 and 106: www.ath-heinl.de ATH-Heinl GmbH & C
Page 107 and 108: Sommaire 1.0 INTRODUCTION .........
Page 109 and 110: 1.2 Description Couvrir sur le dess
Page 111 and 112: 1.3 Utilisation Bouton d'ascenseur
Page 113 and 114: consignes de sécurité 1. Faites a
Page 115 and 116: Répartition de la charge Q Poids t
Page 117 and 118: ® Droit d'auteur ATH-Heinl GmbH &
Page 119 and 120: 2.3 Livraison Caisse de transport a
Page 121 and 122: 2.5 Fixation Il convient ici de res
Page 123 and 124: 2.9 Montage Ce manuel ne doit pas
Page 125 and 126: Installation de l'alimentation Plac
Page 127 and 128: Raccordement de la ligne hydrauliqu
Page 129 and 130: 2.10 Travaux finaux Avant la mise e
Page 131 and 132: Vérifier le bon fonctionnement de
Page 133 and 134: 3.0 EXPLOITATION 3.1 Manuel d'utili
Page 135 and 136: 4.0 MAINTENANCE Afin de garantir le
Page 137 and 138: 4.3 Remarques Quel que soit l'état
Page 139 and 140: Problèmes lors de l'abaissement Le
Page 141 and 142: 4.7 Élimination • Coupez l'alime
Page 143 and 144: 6.0 ANNEXE 6.1 Schéma pneumatique
Page 145 and 146: 6.3 Schéma hydraulique 1 Filtre à
Page 147 and 148:
7.1 Étendue de la garantie produit
Page 149 and 150:
8.1 Procès-verbal d'installation e
Page 151 and 152:
8.3 Contrôle visuel (personne qual
Page 153 and 154:
Contrôle visuel (personne qualifi
Page 155 and 156:
9.0 NOTICES ® Droit d'auteur ATH-H
Page 157 and 158:
www.ath-heinl.de ATH-Heinl GmbH & C
Page 159 and 160:
Spis treści 1.0 WPROWADZENIE .....
Page 161 and 162:
1.2 Opis Pokrywa na górze Aby zakr
Page 163 and 164:
1.3 Obsługa Przycisk podnoszenia p
Page 165 and 166:
Instrukcje bezpieczeństwa 1. Zwró
Page 167 and 168:
Rozkład obciążenia Q Całkowita
Page 169 and 170:
® Prawa autorskie ATH-Heinl GmbH &
Page 171 and 172:
2.3 Zakres dostawy Skrzynia transpo
Page 173 and 174:
2.5 Mocowanie W tym przypadku nale
Page 175 and 176:
2.9 Montaż Niniejszej instrukcji n
Page 177 and 178:
Instalacja zasilacza Umieść zasil
Page 179 and 180:
Podłączenie linii hydraulicznej U
Page 181 and 182:
2.10 Prace końcowe Przed uruchomie
Page 183 and 184:
Sprawdź, czy wyłącznik krańcowy
Page 185 and 186:
3.0 PRACA 3.1 Instrukcja eksploatac
Page 187 and 188:
4.0 KONSERWACJA Aby zapewnić bezpi
Page 189 and 190:
4.3 Wskazówki Bez względu na zani
Page 191 and 192:
Problemy z opuszczaniem Winda sama
Page 193 and 194:
4.7 Utylizacja • Odłączyć dop
Page 195 and 196:
6.0 ZAŁĄCZNIK 6.1 Schemat obwodu
Page 197 and 198:
6.3 Schemat obwodu hydraulicznego 1
Page 199 and 200:
7.1 Zakres gwarancji produktu • P
Page 201 and 202:
8.1 Protokół ustawiania i przekaz
Page 203 and 204:
8.3 Kontrola wzrokowa (upoważniona
Page 205 and 206:
Kontrola wzrokowa (upoważniona oso
Page 207 and 208:
9.0 NOTIZEN ® Prawa autorskie ATH-
Page 209:
www.ath-heinl.de ATH-Heinl GmbH & C
show all

ATH-Heinl Bedienungsanleitung Single Lift 25M

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?