ATH-Heinl Bedienungsanleitung Single Lift 25M

Base frame
Used to stabilize the lift and contains the front castors for moving the lift.
Drive set
Used to move and position the lift. The operation may only be carried out without a load.
Control box
The complete electrical control system is located here. All buttons are protected by a front ring to prevent unintentional
operation. Furthermore, all movements are interrupted immediately when the buttons are released (dead man's control).
Unlocking solenoid
Electromagnet for unlocking the safety catch during the lowering process. The safety catch prevents the platform from lowering
automatically in the event of a fault.
Hydraulic unit
The hydraulic oil is fed from the tank to the lifting cylinder via a gear pump driven by the electric motor. The oil can flow back to
the tank via the lowering valve.
1.3 Operation
7
6
1
2
5
4
3
Lift button
to raise the lift
Lower button
to lower the lift completely (detents and lowering valve are opened)
Car socket 12V DC
Built-in socket 1 x 230V
Button parking (LOCK)
to lower the lift into the notch (only the lowering valve is opened)
Operating light
indicates whether the lifting platform is ready for operation
Lockable main switch with emergency stop function
to switch the lift on and off and to secure the lift from operation by unauthorized persons
® Copyright1 / Copyright2 / Copyright3
Stand: 10.07.2024 / Copyright4
59