Mi-Tube User Manual - Fatman
Mi-Tube User Manual - Fatman
Mi-Tube User Manual - Fatman
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Mi</strong>-<strong>Tube</strong> Hybrid Valve 28 watt Amplifier with Bluetooth<br />
<strong>Mi</strong>-<strong>Tube</strong> <strong>User</strong> <strong>Manual</strong>
Contents<br />
Safety instructions 3<br />
Amplifier connections 4<br />
Speaker connections 4<br />
Connecting via Bluetooth 5<br />
Controls 6<br />
Fault Finding 7<br />
Specifications 8<br />
Service 8<br />
<strong>Mi</strong>-<strong>Tube</strong> Hybrid Valve 28 watt Amplifier with Bluetooth<br />
<strong>Mi</strong>-<strong>Tube</strong> <strong>User</strong> <strong>Manual</strong>
Safety Instructions<br />
They’re Important, So Please Read Carefully !<br />
Please Do…<br />
Keep these instructions in a safe place for future reference – you may need them.<br />
The <strong>Mi</strong>-<strong>Tube</strong> should be used on a clean, dry & flat surface.<br />
<strong>Mi</strong>-<strong>Tube</strong> Hybrid Valve 28 watt Amplifier with Bluetooth<br />
<strong>Mi</strong>-<strong>Tube</strong> <strong>User</strong> <strong>Manual</strong><br />
<strong>Mi</strong>-<strong>Tube</strong> needs room to breathe, so make sure its new home has adequate ventilation. Don’t put it on beds, sofas, rugs, enclosed<br />
bookcases, cabinets or anywhere that ventilation may be obstructed and it can overheat.<br />
Make sure that your <strong>Mi</strong>-<strong>Tube</strong> is connected to the correct power supply as indicated on the unit.<br />
Unplug your <strong>Mi</strong>-<strong>Tube</strong> when it’s not in use for a long period (we’re taking days not hours).<br />
Always make sure cables are placed safely.<br />
If you move your <strong>Mi</strong>-<strong>Tube</strong> from a cool to warm place, condensation may form on the surface of the vacuum tube. It’s nothing to worry<br />
about, but allow 1 hour before you switch it on again. This will avoid leakage or a blowout of the vacuum tube due to too much sudden<br />
heat.<br />
You should have your <strong>Mi</strong>-<strong>Tube</strong> serviced by a qualified service engineer if;<br />
Please Don’t…<br />
The power cord is damaged<br />
The unit is dropped or struck by a falling object<br />
It’s exposed to rain or moisture<br />
Liquid is spilt on it<br />
It’s not operating normally or shows a sudden change in performance<br />
Don’t put your <strong>Mi</strong>-<strong>Tube</strong> anywhere near water including bathtubs, sinks, washing machines, swimming pools, saunas, Jacuzzis, kettles etc.<br />
Don’t expose it to direct sunlight or to extremes of temperature or humidity.<br />
Don’t leave it near direct heat sources such as radiators, stoves, gas fires, naked flames or candles.<br />
Don’t drop the unit, it’s delicate, don’t apply excessive force to the controls or place heavy objects on it.<br />
Don’t let too much dust gather on the unit, give it a regular wipe with dry cloth if necessary. Do not use solvents.<br />
<strong>Mi</strong>-<strong>Tube</strong> has vacuum tubes which can get hot. Don’t touch the tubes and keep away from babies & children.<br />
Don’t try to remove the cover or back panel – there are no user serviceable parts inside and danger of electric shock.<br />
NOTE: Any unauthorised changes or modifications to this equipment render the manufacturers warranty void.<br />
Page 3
Amplifier Connections<br />
<strong>Mi</strong>-<strong>Tube</strong> Hybrid Valve 28 watt Amplifier with Bluetooth<br />
<strong>Mi</strong>-<strong>Tube</strong> <strong>User</strong> <strong>Manual</strong><br />
Before connecting anything to or from your <strong>Mi</strong>-<strong>Tube</strong>, switch OFF the power to the <strong>Mi</strong>-<strong>Tube</strong> and to the components you want to connect.<br />
Make sure that all connections between the <strong>Mi</strong>-<strong>Tube</strong> and other components are made correctly, L (left) goes to L & R (right) goes to R.<br />
Don’t forget to refer to the owners manual of each component that you want to connect.<br />
Speaker Connections<br />
Connect to your speakers using quality speaker wire.If your speaker wires are not connected properly you may hear no sound at all, or if<br />
the wires are mixed up it will sound weird with a disturbing loss of bass.<br />
When using bare speaker wires, fit at least 1.6mm of insulation inside the speaker terminals so there’s no bare wire showing.<br />
Any speakers you connect should have an impedance of 4-8 ohms - if it’s not written on the back of the speaker contact the manufacturer.<br />
Make sure the wire holders are firmly screwed in, to stop the wires from becoming loose. If wires touch the speakers or the unit could be<br />
damaged.<br />
Always turn OFF the power switches when you’re connecting or disconnecting from the mains.<br />
Disconnect from the mains if you’re not planning to use your <strong>Mi</strong>-<strong>Tube</strong> for a while eg. Holidays<br />
Page 4
Blue tooth Connection<br />
<strong>Mi</strong>-<strong>Tube</strong> Hybrid Valve 28 watt Amplifier with Bluetooth<br />
<strong>Mi</strong>-<strong>Tube</strong> <strong>User</strong> <strong>Manual</strong><br />
<strong>Mi</strong>-<strong>Tube</strong> plays wirelessly with compatible Bluetooth enabled Smartphones, Net Books, Laptops & Computers<br />
Turn <strong>Mi</strong>-<strong>Tube</strong> on<br />
Select Bluetooth on left hand input selector switch<br />
Select Bluetooth on your audio source eg. Smartphone, lap top etc.<br />
After a short time <strong>Fatman</strong> will appear on your audio source screen. Select pair<br />
<strong>Mi</strong>-<strong>Tube</strong> will now be ready to play your music wirelessly within a range of approximately 30 ft.<br />
The range can vary depending on other wireless signals in the room.<br />
Page 5
Controls & connections: <strong>Mi</strong>- <strong>Tube</strong>: Front & Back<br />
<strong>Mi</strong>-<strong>Tube</strong> Hybrid Valve 28 watt Amplifier with Bluetooth<br />
<strong>Mi</strong>-<strong>Tube</strong> <strong>User</strong> <strong>Manual</strong><br />
Input Select (left): Bluetooth, Line 1 or Line 2 Volume Control (right)<br />
Connections: Mains switch, Mains input socket & fuse, Speaker outputs L&R, Line Inputs 1& 2 Page 6
Fault Finding<br />
Won’t turn on when the<br />
POWER switch is pressed<br />
<strong>Mi</strong>-<strong>Tube</strong> Hybrid Valve 28 watt Amplifier with Bluetooth<br />
<strong>Mi</strong>-<strong>Tube</strong> <strong>User</strong> <strong>Manual</strong><br />
Power cable isn’t connected properly, mains<br />
supply is off<br />
No sound The volume control is turned all the way to the<br />
left<br />
The connection wires are not connected<br />
securely to the Input terminals<br />
Speakers are not connected properly<br />
No sound from left or right speaker One or both speakers are not properly<br />
connected<br />
The acoustic image is unstable (sounds<br />
unnatural or weirdly bass light)<br />
The positive and negative polarities of the unit<br />
and speakers aren’t matched<br />
Crackling sound from speakers Bad connection<br />
A problem with your audio source<br />
Sound is distorted Volume level on <strong>Mi</strong>-<strong>Tube</strong> is too high<br />
Sound source is distorted<br />
Radio interference You may be too close to a radio tower<br />
Make sure the power cable is firmly<br />
plugged in ands mains is switched<br />
on<br />
Turn the control to the right to crank<br />
up the volume<br />
Make sure the cords are fully<br />
inserted at both ends<br />
Check that the speaker cables are<br />
connected correctly<br />
Check both speaker cables and<br />
ensure they’re connected securely<br />
Check the connections between<br />
your source and amplifier are<br />
correctly and firmly connected<br />
Remove the speaker cable and<br />
connect them correctly<br />
Check connections<br />
Check audio source<br />
Turn it down a bit<br />
WAV & MIDI files are often poor<br />
quality and distortion sounds worst<br />
through a quality system – try a<br />
different audio source<br />
Try moving the speakers to a<br />
different position<br />
Page 7
Specification<br />
Max output power: 28W x 2<br />
Frequency response: 20Hz-20Khz (+/- 1.0d)<br />
Distortion: 0.5%<br />
Signal to Noise Ratio: 86db<br />
Input sensitivity: 300mV<br />
Input impedance: 100k Ohm<br />
Output impedance: 4/8 Ohm<br />
Amp Size: Diameter 183mm: Height 145mm<br />
Weight: 4.kg<br />
Type of amp: Hybrid<br />
Inputs: RCA pr x 2<br />
Service:<br />
Please contact your local authorised dealer or reseller<br />
Available in High Gloss Black or White<br />
<strong>Mi</strong>-<strong>Tube</strong> Hybrid Valve 28 watt Amplifier with Bluetooth<br />
<strong>Mi</strong>-<strong>Tube</strong> <strong>User</strong> <strong>Manual</strong><br />
Page 8