Speedfax 2017

Panelboards
Modifications and Additions
Revised on 04/11/17
Selection
11
PANELBOARDS
Standard Enclosures Made From
Special Materials — Type P1, P2, P3
Stainless Steel Options
14GA 304 SS
Front
Grade (Brush Front) Front
* Stainless available only for Screw-to-Box, Hinge-to-Box, and Door-in-Door.
All have piano hinges only.
**No special sizes. 20" and 24" wide only.
Stainless Steel Additions to
Enclosure Size (Type 1 Only)
Width
Depth
Lighting Panel
Order in 2" increments
(30" max)
Order in 2" increments
(10" max)
Consult factory for dimension limitations.
Distribution Panels
Order in 2" increments
Order in 2" increments
Miscellaneous
Description.
Conduit Hubs — Up to
1 1/2 in. Each
2 in. to
2 1/2 in. Each
3 in. Each
Painted Finish
Set-up Charge Net .
Box Only
Alternate Color Trim
Front And Door Modifications
Two Panels with Common Trim (14 GA only)
Devices Mounted On Interior-Includes
Device, Mounting (Wired or Unwired)
Toggle Switch-SPST or 3-way; 15A, 277 V Maximum
Pilot Light-General Purpose, Neon or Incandescent
Pushbutton
Gauge Steel of Boxes/Fronts, Surface and Flush (see pgs. 11-6 & 11-7)
Dimensions in Inches (mm)
Gauge Steel
H W Box Front/Door Type
26-74 (660-1880) 20 (508) 16 14 Type 1
26-74 (660-1880) 20 (508) 16 16/14 Type 3R/12
32-60 (813-1524) 20-36 (508-914) 14 14 Type 4
26-74 (660-1879) 20 (508) 14 14 Type 4X
36-60 (914-1524) 30-36 (762-914) N/A N/A Type 4X Non-Metallic
16 Gauge is Standard (14 Gauge & 12 Gauge are optional)
15 Gauge Steel Can with 14 Gauge Door or Similar Approved Construction
No Optional Gauge available
304SS 14 Gauge Std., 316SS 14 Gauge optional
Sizes do not match Standard Enclosure Sizes - See Table P1-21 - material is non-metallic - No Gauge Specified.
f FAS-Latch is 14 GA only.
Screw-to-Box, Hinge-to-Box, Door-in-Door (14 GA Std./12 GA Std. or 10 GA Optional)
STB/HTB/DND with Piano Hinge (14 GA Std./12 GA Optional)
Note: For retro fit interiors and fronts into existing can, retro fit must match or exceed
minimum height, width, and depth requirements of standard Type 1 enclosures.
a Panels having doors over 48 in. high, 2 locks are standard.
Lighting panels only. Field must supply dimensional
information and panel orientation.
11-104
Siemens Industry, Inc. SPEEDFAX Product Catalog
Product Category PBSB