Speedfax 2017

3VA Breaker Configuration Information in Panelboards
Revised on 02/29/20
Internal and External Accessories for 400-600A 3VA Breakers
Selection
Description
Accessories (continued)
Quick
reference
code
Voltage
AC max
or range
Voltage
DC max
or range
Accessory
Catalog
Number b
Qty of
slots in
breaker
req'd
Max.
Qty.
per
Brkr
Position to install for
3VA53/63 and
3VA54/64 only
Left side pocket Right side pocket
Pocket reference # ==> 25 24 23 22 21 11 12 13 14 15
11 PANELBOARDS
Internal Accessories
3VA63/64 (ETU) only
Communications Module - 3VA63/64 COM060 n/a 24VDC 3VA9377-0TB10 4 1 X
COM060-to-T-Connector
ext. cable 0.4 m
COM060-to-T-Connector
ext. cable 0.8 m
COM060-to-T n/a n/a 3VA9987-0TF20 n/a n/a
COM060-to-T n/a n/a 3VA9987-0TF10 n/a n/a
COM060 T-Connector (spare part) T-Connector n/a n/a 3VA9987-0TG10 n/a n/a
External b Accessories
and Field Kits
#1-600 kcmil AL wire
connector Kit c AL-lug n/a n/a 3VA9373-0JB13
#1-600 kcmil CU wire
connector Kit c CU-lug n/a n/a 3VA9373-0JD13
2/0-600 kcmil AL 2 port
connector Kit c AL-2lug n/a n/a 3VA9473-0JJ23
2/0-600 kcmil CU 2 port
connector Kit c CU-2lug n/a n/a 3VA9473-0JE23
Compression Lugs
(future offering - details tbd)
TMTU
or ETU
600A max.
tbd n/a n/a tbd n/a n/a
Line or Load end as needed
availability and
usage locations tbd
3VA53/63 or 54/64 PadLock Device tbd n/a n/a 3VA9338-0LB11 n/a n/a
M0320 Motor Operator
- 24-60V DC
M0320 Motor Operator
- 110-230V AC or 110-250V DC
M0320 n/a 24-60V 3VA9277-0HA10 n/a 1 P4/P5 only
M0320
110-
230V
110-
250V
3VA9277-0HA20 n/a 1 P4/P5 only
COM100 and COM800 modules and cables can be found on Communications Tables with ETU Breakers earlier in this section.
a High capacity/power (HP) max. Amps load capacity is higher than standed module
(.55A up to 6.0A) depends on Voltage and AC/DC requirements - see SpeedFax section
7 or 3VA documentation for more information.
b Many accessories available for the 3VA5 and 3VA6 breakers may not be suitable for use
in Lighting Panelboards.
– COMPAS allows options that are available. All accessories listed above can be used
with Panelboards in general, but there will be exceptions."
c Lugs are NOT supplied with loose breaker as standard - must order separately or configure
in COMPAS to include lugs.
– Factory assembled panels include AL lugs as standard, CU lugs are optional. These
kits include 3 connectors and hardware.
d Special electronically-compatible (el) variants are available for applications that require
the auxiliary switch signals to be linked to low voltage systems.
– May need special Mod in COMPAS.
Siemens Industry, Inc. SPEEDFAX Product Catalog 11-69