Speedfax 2017

Revised on 02/29/20
3VA Breaker Configuration Information in Panelboards
P1 Lighting Panel General information
Minimum enclosure size: 20" wide x 5.75" deep
11
PANELBOARDS
P1 Lighting Panelboard
P1 interiors have unit space setup for either:
A) BL/BQD type of breakers only
or
B) xGB and 3VA41 breakers only in same interior
(no BL/BQD allowed)
Deadfront Supports
Neutral Riser
Neutral Strips:
1/0 max. factory
assembled
(BL/BQD)
2/0 max.
available for
field install
2/0 max. std.
for xGB/3VA41
A/C-Phase
Connector
- CU or AL
Base Rails
Main Space
P1 Lighting Panel
P1 Main Space can include:
Main Lugs: 250A or 400A max
Main Breaker Types:
n 100A max BL/BQD & 125A max. xGB or ED
n 125A max. 3VA41 (TMTU)
(horiz. mount)
n 225A max. QR series (horizontal mount)
n 250A max. FD series (horizontal mount)
n 400A max. 3VA53/63 (TMTU/ETU)
(vertical mount)
(ETU = Electronic Trip Unit)
(TMTU = Thermal Magnetic Trip Unit)
n 400A max. JD series (vertical mount)
Future 3VA offering in development:
n 250A max. 3VA52/62 (TMTU/ETU)
(horiz. mount)
P1 Branch Breakers — Small Frame only:
a) 100A max BL series
b) 100A max BQD series
c) 125A max xGB or 3VA41
series after 3/1/2020
(Cannot Mix with BL/BQD)
Note: always check dead front labels
for allowed breakers
B-Phase
Connector
- CU or AL
Bus Bars:
250A - CU or AL
400A - CU or AL
Subfeed Space
P1 Subfeed Space offering:
Feed-thru Lugs:
A) 250A or 400A
B) Surge Protection Devices (SPD)
C) Subfeed Breakers:
– 250A max. horizontal mounnt FD
– 225A max. QR
– 100A max. BL/BQD
– 125A max. xGB/3VA41/ED
Future 3VA offering in development:
– 250A max. 3VA52 TMTU
– 250A max. 3VA62 ETU
– Horizontal mount only
11-52
Siemens Industry, Inc. SPEEDFAX Product Catalog