Speedfax 2017

Distribution Dry Type Transformers
Catalog Number Coding System for Transformers
Revised on 05/31/18
Selection
Seismic Rated:
All others not listed below are not seismic rated
(contact customer support for Wall Mounting Ratings if needed)
Encapsulated Ventilated Non Ventilated
Phase Series J Series J Series H Series J
1 1-25kVA
(Wall Mounted)
S DS =2.00g ; z/h = 1.00 ; I p = 1.5
1-250 kVA
(Floor Mounted)
S DS =2.00g ; z/h = 1.00 ; I p = 1.5
15-167kVA
(Floor Mounted Only)
S DS =2.00g ; z/h = 1.00 ; I p = 1.5
1-250kVA
(Floor Mounted Only)
S DS =2.00g ; z/h = 1.00 ; I p = 1.5
3 3-75kVA
(Floor Mounted)
S DS =2.00g ; z/h = 1.00 ; I p = 1.5
1-1000kVA
(Floor Mounted)
S DS =2.00g ; z/h = 1.00 ; I p = 1.5
15-750kVA
(Floor Mounted Only)
S DS =2.00g ; z/h = 1.00 ; I p = 1.5
1-500kVA
(Floor Mounted Only)
S DS =2.00g ; z/h = 1.00 ; I p = 1.5
DOE 2016 3 Phase Ventilated
3 NA 1-1000kVA
(Floor Mounted)
Seismic labels are standard up to 750kVA with 150C temperature rise.
Series J Results are filed with OSHPD per OSP-0109-10.
Series H results are filed with OSHPD per OSP-0136-10.
15-750kVA
(Floor Mounted Only)
Seismic Qualified according to:
• International Building Code (IBC) 2012
• American Society of Civil Engineers (ASCE) 7-10
NA
8
TRANSFORMERS
Wall Mounting Brackets and Drip Shields
1 Phase Dry Type Wall Brackets/Drip Shields
Wall Mounting Brackets (W) Drip Shields (DS)
kVA
Series J Series H Series J Series H
0.25-25 Encapsulated Wall Mount only NA NA NA
All items below are Ventilated
15, 25 Optional** Standard Standard Standard
37.5 Optional** See Note 1 Standard Standard
50 Optional** See Note 1 Standard Standard
75 NA See Note 1 Standard Standard
100-500 NA Standard Standard
3 Phase Dry Type Ventilated DOE 2016 Wall Brackets/Drip Shields
Wall Mounting Brackets (W) Drip Shields (DS)
kVA
Series J Series H Series J Series H
15, 30 Optional** Standard Standard Standard
45 Optional** See Note 1 Standard Standard
75 See Note 2 See Note 1 Standard Standard
112.5-1000 N/A See Note 1 Standard Standard
3 Phase Dry Type Encapsulated
Wall Mounting Brackets (W) Drip Shields (DS)
kVA
Series J Series H Series J Series H
3-15 Standard Standard N/A N/A
**For DOE 2016 and 1-Phase ventilated, cost of transformer will not include wall brackets.
Wall brackets will be an additional charge.
Standard Terminal Lug Offerings
(Primary and Secondary) for Ventilated Transformers (150 Degree Rise - Series J only - Without a K rating)
1-Phase
3-Phase
kVA 120/240V 208V 480V 600V kVA 120/240V 208V 480V 600V
0-15 Contact customer support 0-15 Contact customer support
15 #2/0-6 #14-2 #14-2 #14-2 15 #14-2 #14-2 #14-2 #14-2
25 250MCM-6 250MCM-6 #14-2 #14-2 30 #2/0-6 #2/0-6 #14-2 #14-2
37.5 350MCM-6 350MCM-6 #14-2 #14-2 45 250MCM-6 250MCM-6 #14-2 #14-2
50 600MCM-2 600MCM-2 #2/0-6 #2/0-6 75 600MCM-2 350MCM-6 #2/0-6 #2/0-6
>50 Contact customer support >75 Contact customer support
Values listed above are for standard configurations.
There may be slight variations depending on requirements.
Contact Customer Support for special requirements
For Series H, see chart in Series H Addendum - Page H-16. Lug sizes are not available except on cutsheets.
Contact Customer Support for special requirements.
1. Standard with DH1 and DH2 enclosures.
For DH3 enclosure, Series H transformers
1000 lbs or less can be wall mounted with
kit p/n TWB75H. The DH3 designation is
found on the lower left corner of the Front
View Outline on the transformer drawing.
2. Optional except with copper windings or
options B, K13, K20. See table page 8-27.
8-8
Siemens Industry, Inc. SPEEDFAX Product Catalog