Speedfax 2017

More documents

Recommendations

Info

Molded Case Circuit Breakers Typical Specifications Reference General Specifications Molded case circuit breakers shall provide circuit overcurrent protection with inverse time and instantaneous tripping characteristics and shall be Siemens Sentron, Sensitrip or approved equal. 7 MOLDED CASE CIRCUIT BREAKERS All circuit breakers shall be listed by Underwriters’ Laboratories, Inc., conform to applicable requirements of NEMA Standard Publication No. AB1 and meet appropriate classifications of Federal Specifications W C 375B/Gen. All circuit breakers shall have a quick-make, quick-break over center toggle type mechanism and the handle mechanism shall be trip free to prevent holding contacts closed against a short circuit or sustained overload. All circuit breaker handles shall assume a position between “ON” and “OFF when tripped automatically. Multi-pole circuit breakers shall be common-trip such that an overload or short circuit on any one pole will result in all poles opening simultaneously. Arc extinction is to be accomplished by magnetic arc chutes. All ratings are to be clearly visible. When reverse feed is indicated on the drawings, in accordance with UL, circuit breakers with sealed trip units shall be supplied. Thermal Magnetic Specifications Unless otherwise noted on the drawings, all Circuit breakers 2000 Ampere and below shall have thermal-magnetic trip units, with inverse time-current characteristics. Automatic operation of these circuit breakers shall be obtained by means of thermal-magnetic tripping devices located in each pole providing inverse time delay and instantaneous circuit protection. Circuit breakers shall be ambient compensating in that, as the ambient temperature increases over 40°C, the circuit breaker automatically derates itself so as to better protect its associated conductor. Thermal magnetic breakers from 250 to 2000A frames shall have thermal interchangeable trip units, with instantaneous magnetic trip settings that are adjustable and accessible from the front of all circuit breakers on frame sizes 250 Amperes and above. Where indicated, provide circuit breakers UL listed for application at 100% of their continuous ampere rating in their intended enclosure. Motor Circuit Protectors Where indicated on the drawings and in the combination motor starter/motor control center schedule, furnish instantaneous magnetic trip only circuit breakers for motor short circuit protection. The magnetic trips shall be adjustable and accessible from the front of all circuit breakers frames. The continuous current rating shall be between 1 and 800 Amperes as indicated on the drawing. The interrupting rating of the circuit breakers shall be as indicated in the specifications, and shown on the drawing or single line diagram. The interrupting rating of the circuit breakers shall be at least equal to the available short circuit current at the line terminals of the circuit breaker and correspond to the UL listed integrated short circuit current rating specified. Internal Accessories Provide shunt trips, bell alarms, and auxiliary switches as shown on the contract drawings. Gold plated auxiliary switches shall be supplied for PLC connection. Internal accessories for all breakers shall be UL listed for field installation and modification. Solid State Sensing Specifications As indicated on the drawings, circuit breaker frames 400 Ampere through 3200-Ampere shall have microprocessor-based RMS sensing trip units, with the capability to measure through to the 21st harmonic. Automatic operation of all circuit breaker frames 400A and larger shall be obtained by means of solid state tripping elements providing inverse time delay and (instantaneous) and/or (short-time delay) circuit protection. Continuous current ratings shall be adjustable from 20% to 100% of the trip unit rating, without the need for a rating plug. Long-time delay and instantaneous trip shall be adjustable. The optional short-time trip function shall have adjustable pick-up settings, three fixed times, and I 2 t ramp. Circuit breaker frames 400A and larger, and where indicated on the drawings, shall be 100% equipment rated. Integral Ground Fault Option Main and feeder circuit breakers, as indicated on the drawings, shall be provided with integral ground fault protection. Ground fault pick-up shall be adjustable from 20% to 70% of the circuit breakers maximum continuous current rating. Ground fault time delay shall be adjustable with three 1 2 t ramps. Metering Option When indicated on the drawings, solid state trip breakers shall be furnished with a plug-in or panel mounted metering device. This device shall simultaneously display all three phase currents, as well as average current, ground current, and phase unbalance. In addition it shall display breaker status, a max log, and a trip log. The trip log will retain and display date, time and type of trip (overload, short circuit or ground fault) for the most recent 5 trip events. Current Limiting Specifications Where indicated on the drawings, Siemens current limiting circuit breakers are to be furnished. Current limiting circuit breakers shall limit the let-through I 2 t to a value less than the I 2 t of one-half cycle wave of the symmetrical prospective current without any fusible elements when operating within its current range. Series Connected Combination Specifications Where protective devices are applied in series combination, such that the prospective available fault current exceeds the interrupting rating (AIR) of the downstream protective devices, such combinations shall be UL recognized combinations. All electrical equipment using these UL recognized circuit breaker combinations shall be clearly marked in accordance with NEC Section 240-83(c). Connection Accessories Unless otherwise noted, Mechanical lugs shall be provided with all Molded Case Breakers. Where indicated on the drawings, compression lugs shall be provided on 1200 Ampere frame and below circuit breakers. All compression lugs shall be supplied by the Circuit Breaker Manufacturer. Where indicated on the drawings, UL listed plug-in or rear connectors shall be supplied. 7-236 Siemens Industry, Inc. SPEEDFAX Product Catalog
Molded Case Circuit Breakers Superseded Breakers General Sentron Series Note Superseded Note Superseded CED62B015-CED62B125 a CLE62B015-CLE62B100 c CE2B015-CE2B100 CED62S100A a CLE62S100 c CE2S100 CED63A001-CED63A125 a CLE63A001-CLE63A125 CED63B015-CED63B125 a CLE63B015-CLE63B100 c CE3B015-CEB100 CED63S100A a CLE63S100 c CE3S100 HHED63B015-HHED63B125 a HED63B015-HED63B125 CFD62A150, CFD62L150, CFD62A250 a CLF62A150, CLF62A250 CFD62B070-CFD62B250 a CLF62B070-CLF62B240 c CJ2B125-CJ2B250 CFD62S250A a CLF62S250 CFD63A150, CFD63L150, CFD63A250 a CLF63A150, CLF63A250 CFD63B070-CFD63B250 a CLF63B070-CLF63B250 c CJ3B125-CJ3B250 CFD63S250A a CLF63S250 CJD62B200-CJD62B400 a CLJ62B100-CLJ62B400 d CJ2B300-CJ2B400 CJD62H400, CJD62L400 a CLJ62L400, CLJ62H400 CJD62S400A a CLJ62S400 d CJ2S400 CJD63B200-CJD63B400 a CLJ63B200-CLJ63B400 d CJ3B300-CJ3B400 CJD63H400, CJD63L400 a CLJ63L400, CLJ63H400 CJD63S400A a CLJ63S400 d CJ3S400 CPD63B120-CPD63B160 e CP3B120-CP3B160 ED21B015-ED21B100 a E21B015-E21B100 b EE1B015-EE1B100 ED22B015-ED22B100 a E22B015-E22B100 b EE2B015-EE2B100 ED22S100A a E22S100A b EE2S100 ED23B015-ED23B100 a E23B015-E23B100 b EE3B015-EE3B100 ED23S100A a E23S100A b EE3S100 ED41B015-ED41B100 a E41B015-E41B100 b EH1B015-EH1B100 ED42B015-ED42B125 a E42B015-E42B100 b EH2B015-ED2B125 ED42S100A a E42S100 b EH2S100 ED43B015-ED43B125 a E43B015-E43B100 b EH3B015-EH3B100 ED43S100A a E43S100 b EH3S100 ED61B015-ED61B100 a E61B015-E61B100 b EF1B015-EF1B020 ED62B015-ED62B125 a E62B015-E62B100 b EF2B015-EF2B100 ED62S100A a E62S100A b EF2S100 ED63A001-ED63A125 a E63A001-E63A125 b EF3A003, EF3J050, EF3L050-EF3A100, EF3H1 ED63B015-ED63B125 a E63B015-E63B100 b EF3B015-EF3B100 ED63S100A a E63S100A b EF3S100 HHED63B015-HHED63B125 a HED63B015-HED63B125 FD62B070-FD62B250 f a F62B070, F62B250 FD63B070-FD63B250 f a F63B070-F63B250 FXD62A150, FXD62L150, FXD62A250 a FJ62A150, FJ62L150-FJ62A250 FXD62B070-FXD62B250 f a FJ62B070-FJ62B250 b FJ2B070-FJ2B225 FXD62S250A a FJ62S250 b FJ2S225 FXD63A150, FXD63L150, FXD63A250 a FJ63A150, FJ63L150-FJ63A250 b FJ3A225 FXD63B070-FXD63B250 f a FJ63B070-FJ63B250 b FJ3B070-FJ3B225 FXD63S250A a FJ63S250 b FJ3S225 HED41B015-HED41B100 a HE41B015-HE41B100 HED42B015-HED42B125 a HE42B015-HE42B100 HED43B015-HED43B125 a HE43B015-HE43B100 HED61B015-HED61B100 a HE61B015-HE61B100 b HE2B015-HE2B100 HED63B015-HED63B125 a HE63B015-HE63B100 b HE3B015-HE3B100 HFD62B070-HFD62B250 a HF62B070-HF62B250 HFD63B070-HFD63B250 a HF63B070-HF63B250 HHED63B015-HHED63B125 a HED63B015-HED63B125 HJD63B200-HJD63B400 a HJ63B200-HJ63B400 b HJ3B125-HJ3B400 HLD63B250-HLD63B600 a HL63B450-HL63B600 b HL3B450-HL3B600 HMD63B500-HMD63B800 b HN3B500-HN3B800 HND63B100-HND63B120 b HK3B100-HK3B120 HPD63B120-HPD63B160 b HP3B120-HP3B160 HRD63B160-HRD63B200 b HR3B160-HR3B200 7 MOLDED CASE CIRCUIT BREAKERS aMechanically and electrically interchangeable. bElectrically interchangeable only, refer to sales office for further details. cElectrically interchangeable only if the system interrupting capacity is less than or equal to: 200 kA at 240V AC 200 kA at 480V AC 100 kA at 600V AC dElectrically interchangeable only if the system interrupting capacity is less than or equal to: 200 kA at 240V AC 150 kA at 480V AC 100 kA at 600V AC eRefer to local sales office for replacement information. fEffective 1994 — The FD6 and FXD6 types have been replaced by FD6-A and FXD6-A type thermal / magnetic circuit breakers — mechanically and electrically interchangeable with the exception that FXD6-A and FD6-A have 22kA at 600V AC ratings versus 18kA at 600V AC for types FXD6 and FD6. Siemens Industry, Inc. SPEEDFAX Product Catalog 7-237
Page 1 and 2:
Load Centers & Circuit Breakers SPE
Page 3 and 4:
Plug-On Neutral Load Centers Revise
Page 5 and 6:
PN Series 1-Phase Plug-On Neutral L
Page 7 and 8:
PN Series 1-Phase Plug-On Neutral L
Page 9 and 10:
SN Series 1-Phase Plug-On Neutral L
Page 11 and 12:
Specialty Main Lug and Main Breaker
Page 13 and 14:
PL Series 3-Phase Main Lug & Main B
Page 15 and 16:
ES Series 3-Phase Main Lug & Main B
Page 17 and 18:
Generator Ready Load Centers Revise
Page 19 and 20:
EQ ® Load Centers, Small Circuit a
Page 21 and 22:
Renovation Interiors Revised on 03/
Page 23 and 24:
Load Centers Accessories Revised on
Page 25 and 26:
Load Centers Accessories Revised on
Page 27 and 28:
Load Centers 3-Phase Indoor and Ris
Page 29 and 30:
Load Centers Outdoor Enclosures—K
Page 31 and 32:
Load Centers Cross Reference Phase
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Circuit Breakers Revised on 10/31/1
Page 43 and 44:
Circuit Breakers Special Applicatio
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Circuit Breakers Circuit Breaker Ac
Page 51 and 52:
s 1-888-333-3545 usa.siemens. com/s
Page 53 and 54:
AC Disconnects 1-Phase, NEMA 3R Rat
Page 55 and 56:
Meter Centers SPEEDFAX TM 2Section
Page 57 and 58:
Meter Centers Meter Mounting Device
Page 59 and 60:
Meter Centers Single Position Meter
Page 61 and 62:
Meter Centers Single & Multiple Pos
Page 63 and 64:
Meter Centers Single Position Meter
Page 65 and 66:
Meter Centers Special Application M
Page 67 and 68:
Temporary Power Outlet Panels Power
Page 69 and 70:
Temporary Power Outlet Panels Revis
Page 71 and 72:
Temporary Power Outlet Panels Dimen
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Meter Centers Transformer-Rated Met
Page 79 and 80:
Meter Centers Meter Socket Accessor
Page 81 and 82:
Meter Centers Meter Socket Knockout
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Meter Centers Meter Combination Int
Page 91 and 92:
Meter Mains Meter Load Center Combi
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Meter Centers SOLAR Ready, Meter-Lo
Page 99 and 100:
EUSERC Meter Load Center Combinatio
Page 101 and 102:
EUSERC Meter Load Center Combinatio
Page 103 and 104:
EUSERC Commercial Metering Commerci
Page 105 and 106:
Meter Centers Electricenter Accesso
Page 107 and 108:
Meter Centers Meter Combinations Di
Page 109 and 110:
Page 111 and 112:
Meter Centers MC1224B1100FC/MM1224B
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Meter Centers MM0202B1100ESC Meter
Page 119 and 120:
MM0202L1200ESC Meter Centers Meter
Page 121 and 122:
Page 123 and 124:
Combination Meter Sockets Catalog N
Page 125 and 126:
Meter Mains Meter Mains Meter Load
Page 127 and 128:
n UL listed n 22,000 AIC Rated n Pa
Page 129 and 130:
EUSERC Meter EUSERC Load Meter Cent
Page 131 and 132:
Combination Meter Sockets Electrice
Page 133 and 134:
Group Metering: NYC Gangable Meteri
Page 135 and 136:
Group Metering: NYC Gangable Meteri
Page 137 and 138:
Power Mod and Uni-PAK SPEEDFAX TM
Page 139 and 140:
Power Mod Revised on 12/13/17 Intro
Page 141 and 142:
Power Mod Revised on 06/30/19 Overv
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Power Mod Revised on 06/30/19 Intro
Page 149 and 150:
Power Mod Revised on 03/31/19 Appli
Page 151 and 152:
Power Mod Revised on 08/31/20 Type
Page 153 and 154:
Page 155 and 156:
Power Mod Type WB Standard Circuit
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Power Mod Type WS Standard Switch M
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Power Mod Type WT Feed Thru Tap box
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Power Mod Power Mod Residential Met
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Power Mod Meter Stacks: WML Lever B
Page 203 and 204:
Power Mod Meter Stacks: WML Lever B
Page 205 and 206:
Page 207 and 208:
Power Mod Type WMLZF and WMLZ Utili
Page 209 and 210:
Page 211 and 212:
Power Mod Type WMT Test Block Bypas
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Power Mod Type WCL Lever Bypass Hou
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Power Mod Type WSPD Surge Protectio
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Power Mod Type WMN ConEd Residentia
Page 235 and 236:
Page 237 and 238:
Power Mod Revised on 06/30/19 WMMB
Page 239 and 240:
Power Mod Revised on 04/30/20 Expan
Page 241 and 242:
Uni-PAK Revised on 03/31/18 Uni-PAK
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Uni-PAK Uni-PAK Metering: Dimension
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Power Mod Revised on 10/31/19 Lug K
Page 267 and 268:
Power Mod Revised on 10/31/19 Modul
Page 269 and 270:
Power Mod and Uni-PAK Revised on 10
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Uni-PAK Metering Accessories Revise
Page 277 and 278:
Power Mod Revised on 06/30/19 WMM R
Page 279 and 280:
Power Mod Revised on 06/30/19 WML a
Page 281 and 282:
Safety Switches SPEEDFAX TM 4Sectio
Page 283 and 284:
Feature Comparison Revised on 02/28
Page 285 and 286:
Catalog Numbering System Type VBII
Page 287 and 288:
General Duty Safety Switches Featur
Page 289 and 290:
Heavy Duty Safety Switches Features
Page 291 and 292:
Heavy Duty Safety Switches Selectio
Page 293 and 294:
Heavy Duty Safety Switches Type 4/4
Page 295 and 296:
Heavy Duty Safety Switches Type ECS
Page 297 and 298:
Heavy Duty Safety Switches Special
Page 299 and 300:
Heavy Duty Safety Switches Enclosed
Page 301 and 302:
General and Heavy Duty Safety Switc
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Special Application Safety Switches
Page 311 and 312:
Special Application Safety Switches
Page 313 and 314:
Safety Switches Revised on 12/17/17
Page 315 and 316:
Enclosed Switches Rotary Disconnect
Page 317 and 318:
Disconnect Switches SPEEDFAX TM Sec
Page 319 and 320:
Disconnect Switches Compact Non-Fus
Page 321 and 322:
Disconnect Switches Enclosed Rotary
Page 323 and 324:
Disconnect Switches Type VBII (30-6
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Disconnect Switches Type MCS (30-20
Page 331 and 332:
Disconnect Switches Type CFS Compac
Page 333 and 334:
Disconnect Switches Type CFS Compac
Page 335 and 336:
Disconnect Switches Type CNFS Switc
Page 337 and 338:
Disconnect Switches Type CNFS Compa
Page 339 and 340:
Disconnect Switches Type VB Panelbo
Page 341 and 342:
Disconnect Switches Type VB Panel U
Page 343 and 344:
Disconnect Switches Type HCP Switch
Page 345 and 346:
Disconnect Switches Type TFP Fusibl
Page 347 and 348:
Enclosed Circuit Breakers SPEEDFAX
Page 349 and 350:
Enclosed Circuit Breakers Complete
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Enclosed Circuit Breakers Enclosure
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Molded Case Circuit Breakers SPEEDF
Page 363 and 364:
Molded Case Circuit Breakers Revise
Page 365 and 366:
Molded Case Circuit Breakers Federa
Page 367 and 368:
Molded Case Circuit Breakers Refere
Page 369 and 370:
Page 371 and 372:
Molded Case Circuit Breakers 3VA UL
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Circuit Breakers Arc-Fault and Grou
Page 381 and 382:
Circuit Breakers Duplex, Triplex an
Page 383 and 384:
Circuit Breakers 3/4 Inch Plug-In B
Page 385 and 386:
Page 387 and 388:
Circuit Breakers Lug Data Revised o
Page 389 and 390:
Molded Case Circuit Breakers Panelb
Page 391 and 392:
Molded Case Circuit Breakers Panelb
Page 393 and 394:
Molded Case Circuit Breakers GB Fra
Page 395 and 396:
Molded Case Circuit Breakers Access
Page 397 and 398:
3VA Molded Case Circuit Breakers 3V
Page 399 and 400:
Molded Case Circuit Breakers DIN Ra
Page 401 and 402:
Molded Case Circuit Breakers QR Acc
Page 403 and 404:
Molded Case Circuit Breakers GG 125
Page 405 and 406:
Molded Case Circuit Breakers Notes
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Page 453 and 454:
Page 455 and 456:
Page 457 and 458:
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
Page 467 and 468:
Page 469 and 470:
which indicates ON and OFF and, via
Page 471 and 472:
Molded Case Circuit Breakers ED 125
Page 473 and 474:
Molded Case Circuit Breakers Access
Page 475 and 476:
Molded Case Circuit Breakers FD 250
Page 477 and 478:
Molded Case Circuit Breakers JD 400
Page 479 and 480:
Molded Case Circuit Breakers SJD 40
Page 481 and 482:
Molded Case Circuit Breakers LD 600
Page 483 and 484:
Molded Case Circuit Breakers SLD 60
Page 485 and 486:
Molded Case Circuit Breakers LMD 80
Page 487 and 488:
Molded Case Circuit Breakers Intern
Page 489 and 490:
Molded Case Circuit Breakers MD 800
Page 491 and 492:
Page 493 and 494:
Molded Case Circuit Breakers ND 120
Page 495 and 496:
Page 497 and 498:
Molded Case Circuit Breakers SPD 16
Page 499 and 500:
Molded Case Circuit Breakers RD 200
Page 501 and 502:
Molded Case Circuit Breakers Motor
Page 503 and 504:
Molded Case Circuit Breakers Adjust
Page 505 and 506:
Molded Case Circuit Breakers Adjust
Page 507 and 508:
Molded Case Circuit Breakers Digita
Page 509 and 510:
WL Power Circuit Breakers 3-pole &
Page 511 and 512:
WL Power Circuit Breakers Electroni
Page 513 and 514:
Lug Information Mechanical Lug Revi
Page 515 and 516:
Lug information Optional Mechanical
Page 517 and 518:
Page 519 and 520:
Circuit Breakers Circuit Breaker Ac
Page 521 and 522:
Molded Case Circuit Breakers Extern
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Molded Case Circuit Breakers Unusua
Page 529 and 530:
VL Circuit Breakers Catalog Numberi
Page 531 and 532:
VL Circuit Breakers Technical Overv
Page 533 and 534:
VL Circuit Breakers Trip Unit Overv
Page 535 and 536:
VL Circuit Breakers DG 150A Frame,
Page 537 and 538:
VL Circuit Breakers DG 150A Electro
Page 539 and 540:
VL Circuit Breakers FG 250A Frame,
Page 541 and 542:
VL Circuit Breakers FG 250A Electro
Page 543 and 544:
VL Circuit Breakers JG 400A Frame,
Page 545 and 546: VL Circuit Breakers JG 400A Electro
Page 547 and 548: VL Circuit Breakers LG 600A Frame,
Page 549 and 550: VL Circuit Breakers LG 600A Electro
Page 551 and 552: VL Circuit Breakers MG 800A Frame,
Page 553 and 554: VL Circuit Breakers MG 800A Electro
Page 555 and 556: VL Circuit Breakers NG 1200A Frame,
Page 557 and 558: VL Circuit Breakers NG 1200A Electr
Page 559 and 560: VL Circuit Breakers PG 1600A Frame,
Page 561 and 562: VL Circuit Breakers Internal Access
Page 563 and 564: VL Circuit Breakers Motor Circuit P
Page 565 and 566: External Accessories Selection 7 MO
Page 567 and 568: For MG Frame For NG to PG Frame 800
Page 569 and 570: For MG Frame For NG Frame For PG Fr
Page 571 and 572: Revised on 11/30/19 For JG to LG Fr
Page 573 and 574: For JG Frame For LG Frame For MG Fr
Page 575 and 576: Revised on 11/30/19 For JG Frame Fo
Page 577 and 578: Revised on 11/30/19 For JG Frame F
Page 579 and 580: VL Circuit Breakers Selection Suffi
Page 581 and 582: Technical Data Revised on 05/31/18
Page 583 and 584: Technical Data Unusual Operating Co
Page 585 and 586: Molded Case Circuit Breakers Series
Page 595: Molded Case Circuit Breakers IEC 94
Page 599 and 600: Molded Case Circuit Breakers Supers
Page 601 and 602: Transformers SPEEDFAX TM Section Se
Page 603 and 604: Distribution Dry Type Transformers
Page 619 and 620: Transformers Sentron Harmonic Mitig
Page 621 and 622: Warehouse Stock Transformers Wareho
Page 623 and 624: Warehouse Stock Transformers Buck-B
Page 625 and 626: Buck-Boost Transformers Single Phas
Page 627 and 628: Warehouse Stock Transformers Access
Page 629 and 630: Digital Power & Thermal Monitoring
Page 631 and 632: Power Distribution Solutions Revise
Page 643 and 644: Power Distribution Solutions Embedd
Page 645 and 646: Power Distribution Solutions Embedd
Page 647 and 648:
Power Distribution Solutions Embedd
Page 649 and 650:
Power Distribution Solutions Enclos
Page 651 and 652:
Power Distribution Solutions MD Ser
Page 653 and 654:
Power Distribution Solutions Revise
Page 655 and 656:
Power Distribution Solutions SEM3T
Page 657 and 658:
Power SEM3T | Selection Distributio
Page 659 and 660:
Page 661 and 662:
Page 663 and 664:
Power Distribution Solutions Revise
Page 665 and 666:
Power Distribution Solutions Servic
Page 667 and 668:
Surge Protective Devices (SPD) SPEE
Page 669 and 670:
SPD - Surge Protective Devices Reco
Page 671 and 672:
BoltShield Surge Protective Device
Page 673 and 674:
SPD - Surge Protective Devices Firs
Page 675 and 676:
SPD - Surge Protective Devices TPS3
Page 677 and 678:
Page 679 and 680:
Page 681 and 682:
Page 683 and 684:
Page 685 and 686:
Panelboards SPEEDFAX TM Section Sca
Page 687 and 688:
Panelboards General Specifications
Page 689 and 690:
Panelboards General Specifications
Page 691 and 692:
Panelboards Special Enclosures Revi
Page 693 and 694:
Panelboards Revised on 04/30/19 Una
Page 695 and 696:
Panelboards Distributor Stock - Typ
Page 697 and 698:
Panelboards Warehouse Stock/Unassem
Page 699 and 700:
Panelboards Panelboard Replacement,
Page 701 and 702:
Panelboards Revised on 05/01/17 Cir
Page 703 and 704:
Panelboards Circuit Breaker / Light
Page 705 and 706:
Panelboards Revised on 04/30/19 Cir
Page 707 and 708:
Panelboards Circuit Breaker / Light
Page 709 and 710:
Panelboards Type P1 Panelboard Modi
Page 711 and 712:
Panelboards Revised on 04/30/19 Typ
Page 713 and 714:
Panelboards Type P2 Panelboards Rev
Page 715 and 716:
Page 717 and 718:
Panelboards Type P2 Panelboard Modi
Page 719 and 720:
Panelboards Embedded Micro Metering
Page 721 and 722:
Panelboards Type P2 Panelboard Conn
Page 723 and 724:
Page 725 and 726:
Page 727 and 728:
Page 729 and 730:
Page 731 and 732:
Panelboards Type P3 Panelboard Stan
Page 733 and 734:
Panelboards Type P3 Panelboard Kits
Page 735 and 736:
3VA Breaker Configuration Informati
Page 737 and 738:
Revised on 02/29/20 3VA Breaker Con
Page 739 and 740:
Revised on 02/29/20 3VA Breaker Con
Page 741 and 742:
Page 743 and 744:
Page 745 and 746:
Page 747 and 748:
Page 749 and 750:
Page 751 and 752:
Page 753 and 754:
Page 755 and 756:
Panelboards Type P4 Panelboards Dim
Page 757 and 758:
Panelboards Power and Distribution
Page 759 and 760:
Page 761 and 762:
Page 763 and 764:
Page 765 and 766:
Panelboards Modifications and Addit
Page 767 and 768:
Page 769 and 770:
Page 771 and 772:
Page 773 and 774:
Page 775 and 776:
Page 777 and 778:
Page 779 and 780:
Panelboards Modifications and Addit
Page 781 and 782:
Page 783 and 784:
Panelboards Circuit Breaker / Colum
Page 785 and 786:
Panelboards Circuit Breaker / Colum
Page 787 and 788:
Panelboards Enclosure Modifications
Page 789 and 790:
Panelboards Circuit Breaker Accesso
Page 791 and 792:
Panelboards Quik-Spec Coordination
Page 793 and 794:
Panelboards SCCPB Branch Disconnect
Page 795 and 796:
Panelboards Dimensions and Panelboa
Page 797 and 798:
Panelboards Fuse Curves Time-Curren
Page 799 and 800:
Lighting Controls SPEEDFAX TM Secti
Page 801 and 802:
Switchboards SPEEDFAX TM Section Fr
Page 803 and 804:
Distribution Switchboards Type SB1,
Page 805 and 806:
Integrated Power Systems Switchboar
Page 807 and 808:
Commercial Multi-Metering Switchboa
Page 809 and 810:
Switchboards Revised on 04/14/17 Sm
Page 811 and 812:
Generator Ready Switchboards Type G
Page 813 and 814:
Rear Connected Switchboards Type RC
Page 815 and 816:
Stock Service Entrance Switchboards
Page 817 and 818:
Page 819 and 820:
Page 821 and 822:
Page 823 and 824:
Switchboard Monitoring Sm@rtGear Mo
Page 825 and 826:
Switchboard Replacement Parts & Mod
Page 827 and 828:
Switchgear SPEEDFAX TM Section Type
Page 829 and 830:
Medium-voltage Equipment 5 - 15 kV
Page 831 and 832:
Medium-voltage Equipment Medium-vol
Page 833 and 834:
Medium-voltage Equipment Type GMSG
Page 835 and 836:
Medium-voltage Equipment Types GM-S
Page 837 and 838:
Medium-voltage Equipment Types GM-S
Page 839 and 840:
Medium-voltage Equipment GM-SG Acce
Page 841 and 842:
Medium-voltage Equipment Type GM-SG
Page 843 and 844:
Medium-voltage Equipment 38 kV Type
Page 845 and 846:
Medium-voltage Equipment 38 kV Gas-
Page 847 and 848:
Medium-voltage Equipment 5 - 15 kV
Page 849 and 850:
Medium-voltage Equipment SIMOVAC-AR
Page 851 and 852:
Medium-voltage Equipment SIMOVAC Co
Page 853 and 854:
Protective Relays & SCADA Systems S
Page 855 and 856:
Page 857 and 858:
Page 859 and 860:
Page 861 and 862:
Replacement Breakers & Retrofit Pro
Page 863 and 864:
Field Services Start-up Commissioni
Page 865 and 866:
Field Services Arc Flash Study Gene
Page 867 and 868:
Siemens Unit Substation Solutions 5
Page 869 and 870:
Siemens Unit Substation Solutions O
Page 871 and 872:
Siemens Unit Substation Solutions T
Page 873 and 874:
Siemens Unit Substation Solutions T
Page 875 and 876:
Siemens Unit Substation Solutions I
Page 877 and 878:
Selection and Application Guide | S
Page 879 and 880:
Low-voltage Switchgear Type WL Low-
Page 881 and 882:
Page 883 and 884:
Page 885 and 886:
Low-voltage Switchgear Type WL Low
Page 887 and 888:
Low-voltage Switchgear WL Low-volta
Page 889 and 890:
Low-voltage Switchgear WL Low-volta
Page 891 and 892:
Type WL Low Voltage Metal-Enclosed
Page 893 and 894:
Page 895 and 896:
Page 897 and 898:
Page 899 and 900:
(559 m m ) (559 m m Type WL Low ) V
Page 901 and 902:
Page 903 and 904:
Page 905 and 906:
Page 907 and 908:
Switchboard Monitoring Sm@rtGear Mo
Page 909 and 910:
Low-voltage Switchgear Siemens Sm@r
Page 911 and 912:
Page 913 and 914:
Low-voltage Switchgear Type WL Arc
Page 915 and 916:
Low-voltage Switchgear Arc Flash So
Page 917 and 918:
Page 919 and 920:
Page 921 and 922:
Busway Systems SPEEDFAX TM Section
Page 923 and 924:
Busway Systems Overview Busway Sele
Page 925 and 926:
Sentron Busway Systems Sentron Busw
Page 927 and 928:
Sentron Busway Systems Technical Da
Page 929 and 930:
Sentron Busway Systems Straight Sec
Page 931 and 932:
Sentron Straight Section Busway Cop
Page 933 and 934:
Sentron Busway Systems Elbows Revis
Page 935 and 936:
Sentron Busway Systems Revised on 0
Page 937 and 938:
Sentron Busway Systems End Tap Boxe
Page 939 and 940:
NCBA Sentron Busway Systems Joint M
Page 941 and 942:
Sentron Busway Systems TBNK Fitting
Page 943 and 944:
Sentron Busway Systems Reducers and
Page 945 and 946:
Sentron Busway Systems Hangers Revi
Page 947 and 948:
Sentron Busway Systems Hangers and
Page 949 and 950:
Sentron Busway Systems Busway Acces
Page 951 and 952:
Sentron Busway Systems Flanged Ends
Page 953 and 954:
Sentron Busway Systems Cubicle Opti
Page 955 and 956:
Sentron Busway Systems Revised on 0
Page 957 and 958:
Sentron Busway Systems General Info
Page 959 and 960:
Sentron Busway Systems Siemens Sent
Page 961 and 962:
Sentron Busway Systems Programs and
Page 963 and 964:
Sentron Bus Plugs Sentron Bus Plug
Page 965 and 966:
Sentron Bus Plugs Circuit Breaker B
Page 967 and 968:
Sentron Circuit Breaker Bus Plugs B
Page 969 and 970:
Sentron Circuit Breaker Bus Plugs W
Page 971 and 972:
Sentron Busway Systems Fusible Bus
Page 973 and 974:
Sentron Fusible Bus Plugs Fusible B
Page 975 and 976:
Sentron Fusible Bus Plugs Wall Clea
Page 977 and 978:
Sentron SPD Bus Plugs Sentron SPD B
Page 979 and 980:
Sentron 3/6 Bus Plugs Sentron 3/6 B
Page 981 and 982:
0 0 Sentron 3/6 Bus Plugs Rev Third
Page 983 and 984:
Surface Mount Receptacle Bus Plug (
Page 985 and 986:
XJ-L HD Busway System XJ-L HD Buswa
Page 987 and 988:
XJ-L HD Busway System Straight Sect
Page 989 and 990:
XJ-L HD Busway System Elbows Fittin
Page 991 and 992:
XJ-L HD Busway System Tap Boxes Cen
Page 993 and 994:
XJ-L HD Busway System Flanged Ends
Page 995 and 996:
XJ-L HD Busway Systems Revised on 0
Page 997 and 998:
Page 999 and 1000:
Page 1001 and 1002:
Busway Power Distribution XL-U Alum
Page 1003 and 1004:
Busway Power Distribution Revised o
Page 1005 and 1006:
Motor Control Centers SPEEDFAX TM S
Page 1007 and 1008:
tiastar Motor Control Centers Const
Page 1009 and 1010:
tiastar Motor Control Centers Dimen
Page 1011 and 1012:
tiastar Motor Control Centers Incom
Page 1013 and 1014:
tiastar Motor Control Centers Overl
Page 1015 and 1016:
tiastar Motor Control Centers Varia
Page 1017 and 1018:
tiastar Motor Control Centers G120
Page 1019 and 1020:
tiastar Motor Control Centers Power
Page 1021 and 1022:
tiastar Motor Control Centers Start
Page 1023 and 1024:
tiastar Motor Control Centers Start
Page 1025 and 1026:
tiastar Motor Control Centers Power
Page 1027 and 1028:
tiastar Motor Control Centers Produ
Page 1029 and 1030:
Control Products SPEEDFAX TM Sectio
Page 1031 and 1032:
Control Products SPEEDFAX TM Sectio
Page 1033 and 1034:
Control Products NEMA & General Pur
Page 1035 and 1036:
Manual Control Fractional HP Starte
Page 1037 and 1038:
Manual Control Switches a , Class M
Page 1039 and 1040:
Manual Control Starters and Switche
Page 1041 and 1042:
Heavy Duty Starters Revised on 03/3
Page 1043 and 1044:
Heavy Duty Motor Starters Solid Sta
Page 1045 and 1046:
Combination Heavy Duty Starters Fea
Page 1047 and 1048:
Combination Heavy Duty Starters Non
Page 1049 and 1050:
Combination Heavy Duty Starters Fus
Page 1051 and 1052:
Combination Heavy Duty Starters MCP
Page 1053 and 1054:
Combination Reversing Heavy Duty St
Page 1055 and 1056:
Two Speed Heavy Duty Starters Featu
Page 1057 and 1058:
Two Speed Heavy Duty Starters Const
Page 1059 and 1060:
Combination Two Speed Heavy Duty St
Page 1061 and 1062:
Page 1063 and 1064:
Reduced Voltage Heavy Duty Starters
Page 1065 and 1066:
Page 1067 and 1068:
Page 1069 and 1070:
Page 1071 and 1072:
Page 1073 and 1074:
Page 1075 and 1076:
Page 1077 and 1078:
Page 1079 and 1080:
Heavy Duty Contactors 3-Phase, Clas
Page 1081 and 1082:
Reversing Heavy Duty Contactors Cla
Page 1083 and 1084:
Definite Purpose Control Class 42 &
Page 1085 and 1086:
Definite Purpose Control Class 42 &
Page 1087 and 1088:
Definite Purpose Control C Class 42
Page 1089 and 1090:
Heavy Duty Control Catalog Numberin
Page 1091 and 1092:
Overload Relays Solid State ESP200,
Page 1093 and 1094:
Overload Relays Special Use Solid S
Page 1095 and 1096:
Duplex Heavy Duty Controllers Non-C
Page 1097 and 1098:
Duplex Heavy Duty Controllers Combi
Page 1099 and 1100:
Pump Control Panels Slim Line NEMA
Page 1101 and 1102:
Pump Control Panels Slim Line NEMA
Page 1103 and 1104:
Pump Control Panels Class 87, 88 Re
Page 1105 and 1106:
Vacuum Break and Oil Well Pump Cont
Page 1107 and 1108:
Reduced Voltage Pump Panels Wye Del
Page 1109 and 1110:
Lighting and Heating Control Electr
Page 1111 and 1112:
Page 1113 and 1114:
Page 1115 and 1116:
Page 1117 and 1118:
Page 1119 and 1120:
Page 1121 and 1122:
Lighting Control Mechanically and M
Page 1123 and 1124:
Industrial Control Power Transforme
Page 1125 and 1126:
Page 1127 and 1128:
Page 1129 and 1130:
Field Modification Kits Class 11 -
Page 1131 and 1132:
Field Modification Kits Pilot Light
Page 1133 and 1134:
Field Modification Kits NEMA, Reduc
Page 1135 and 1136:
Field Modification Kits NEMA Access
Page 1137 and 1138:
Field Modification Kits NEMA, Overl
Page 1139 and 1140:
Heavy Duty Control Non-Combination
Page 1141 and 1142:
Combination Starter Enclosure Kits
Page 1143 and 1144:
Factory Modifications Revised on 03
Page 1145 and 1146:
Factory Modifications Revised on 03
Page 1147 and 1148:
Manual Control Heater Elements, Cla
Page 1149 and 1150:
Replacement Parts Starters and Cont
Page 1151 and 1152:
Replacement Parts Lighting Contacto
Page 1153 and 1154:
Replacement Parts Miscellaneous Sel
Page 1155 and 1156:
Manual Control Class SMF, MMS Dimen
Page 1157 and 1158:
Heavy Duty Motor Starters Solid Sta
Page 1159 and 1160:
Heavy Duty Contactors Class 40 Dime
Page 1161 and 1162:
Overload Relays & Current Transform
Page 1163 and 1164:
Lighting & Heating Contactors Open
Page 1165 and 1166:
GROUND 1/ L1 3/ L2 5/ L3 2/ T1 11 2
Page 1167 and 1168:
Lighting & Heating Contactors Mecha
Page 1169 and 1170:
Heavy Duty Motor Starters & Contact
Page 1171 and 1172:
Combination Heavy Duty Starters Enc
Page 1173 and 1174:
Reversing Heavy Duty Starters & Con
Page 1175 and 1176:
Page 1177 and 1178:
Page 1179 and 1180:
Duplex Heavy Duty Controllers Class
Page 1181 and 1182:
Lighting Contactors Enclosed Contac
Page 1183 and 1184:
Manual Control Class 11 - 3RV, SMF,
Page 1185 and 1186:
Combination Heavy Duty Starters Cla
Page 1187 and 1188:
Page 1189 and 1190:
Two Speed Heavy Duty Starters Class
Page 1191 and 1192:
SEK SES SAW LMB SEK SES SAW LMB SEK
Page 1193 and 1194:
Reduced Voltage Starters & Pump Pan
Page 1195 and 1196:
Page 1197 and 1198:
Standard & Irrigation Pump Panels C
Page 1199 and 1200:
Page 1201 and 1202:
Lighting and Heating Contactors Mec
Page 1203 and 1204:
240V 230V 220V 480V 230V 460V 220V
Page 1205 and 1206:
Enclosed IEC Controls 3RE4 IEC Cont
Page 1207 and 1208:
Enclosed IEC Controls 3RE4 Non-Reve
Page 1209 and 1210:
Enclosed IEC Controls 3RE4 Non-Reve
Page 1211 and 1212:
Enclosed IEC Controls Selection Tab
Page 1213 and 1214:
Enclosed IEC Controls 3RE4 Factory
Page 1215 and 1216:
Enclosed IEC Controls 3RE4 Field Mo
Page 1217 and 1218:
Enclosed IEC Controls 3RE4 Outline
Page 1219 and 1220:
Enclosed IEC Controls 3RE4 Wiring D
Page 1221 and 1222:
Motor Starters, Soft Starters and L
Page 1223 and 1224:
For Operation in the Control Cabine
Page 1225 and 1226:
Page 1227 and 1228:
Page 1229 and 1230:
Page 1231 and 1232:
Modules for RESET 1) Modules for re
Page 1233 and 1234:
Page 1235 and 1236:
Page 1237 and 1238:
Page 1239 and 1240:
Planning and Configuration with SIR
Page 1241 and 1242:
Page 1243 and 1244:
Page 1245 and 1246:
Page 1247 and 1248:
Page 1249 and 1250:
Page 1251 and 1252:
Page 1253 and 1254:
Control Products Enclosed 3RW44 3RW
Page 1255 and 1256:
Page 1257 and 1258:
Page 1259 and 1260:
Page 1261 and 1262:
Control Products Enclosed 3RW44 Enc
Page 1263 and 1264:
Page 1265 and 1266:
Page 1267 and 1268:
Page 1269 and 1270:
Page 1271 and 1272:
Page 1273 and 1274:
Page 1275 and 1276:
Page 1277 and 1278:
Page 1279 and 1280:
Page 1281 and 1282:
Page 1283 and 1284:
Page 1285 and 1286:
Page 1287 and 1288:
Page 1289 and 1290:
Page 1291 and 1292:
Page 1293 and 1294:
Page 1295 and 1296:
Page 1297 and 1298:
Page 1299 and 1300:
Page 1301 and 1302:
Page 1303 and 1304:
Page 1305 and 1306:
Page 1307 and 1308:
Page 1309 and 1310:
Page 1311 and 1312:
l For Operation in the Control Cabi
Page 1313 and 1314:
3RW44 5. and 3RW44 6. for High-Feat
Page 1315 and 1316:
Page 1317 and 1318:
Page 1319 and 1320:
Page 1321 and 1322:
Page 1323 and 1324:
Push SIRIUS Button ACT Pushbuttons
Page 1325 and 1326:
Pushbutton Units and Indicator Ligh
Page 1327 and 1328:
Push Buttons & Signaling Devices 30
Page 1329 and 1330:
Page 1331 and 1332:
Page 1333 and 1334:
Page 1335 and 1336:
Page 1337 and 1338:
Page 1339 and 1340:
Page 1341 and 1342:
Page 1343 and 1344:
Page 1345 and 1346:
Page 1347 and 1348:
Page 1349 and 1350:
Page 1351 and 1352:
Page 1353 and 1354:
Page 1355 and 1356:
Page 1357 and 1358:
Page 1359 and 1360:
Page 1361 and 1362:
Page 1363 and 1364:
Page 1365 and 1366:
Push Button Units and Indicator Lig
Page 1367 and 1368:
Standby Generators SPEEDFAX TM Sect
Page 1369 and 1370:
Renewable Energy Products SPEEDFAX
Page 1371 and 1372:
Renewable Energy Products Revised o
Page 1373 and 1374:
Page 1375 and 1376:
Page 1377 and 1378:
Product Index Catalog Number Page(s
Page 1379 and 1380:
Page 1381 and 1382:
Page 1383 and 1384:
Page 1385 and 1386:
Page 1387 and 1388:
Page 1389 and 1390:
Page 1391 and 1392:
Page 1393 and 1394:
Page 1395 and 1396:
Page 1397 and 1398:
Page 1399 and 1400:
Page 1401 and 1402:
Page 1403 and 1404:
Page 1405 and 1406:
Page 1407 and 1408:
Page 1409 and 1410:
Technical SPEEDFAX TM TSection C o
Page 1411 and 1412:
Technical Types of Power Distributi
Page 1413 and 1414:
Technical Ground Fault Protection S
Page 1415 and 1416:
Technical Ground Fault Protection 4
Page 1417 and 1418:
Technical Ground Fault Protection T
Page 1419 and 1420:
Technical Overcurrent Protection an
Page 1421 and 1422:
Technical Current Limiting Circuit
Page 1423 and 1424:
Technical Harmonics / K-factor Rati
Page 1425 and 1426:
Technical Table 1 Copper Conductors
Page 1427 and 1428:
Technical Table 6 Electrical Formul
Page 1429 and 1430:
Technical Fraction, Decimal, and Mi
show all

Speedfax 2017

Create successful ePaper yourself

Delete template?

Save as template?