Speedfax 2017

Uni-PAK
Revised on 06/30/19
Uni-PAK Metering: WP Ring Style
Single Piece Tenant cover
225 amp
devices
accept
standard
125 amp
breakers
Mounting
Rail c
Features
n Individual split covers
n Ring style meter construction
n UL Listed for 60 / 75°C conductors. See equipment
markings for applications
n For small apartment buildings, small professional and
commercial buildings
n Completely self-contained meter centers
n Two to six 125A and 225A sockets breaker positions
3
METER
CENTERS
Extra
Neutral &
Ground
Provisions
Factory
Installed
Lugs
n Outdoor surface mounted enclosures
n Compact, pre-bussed, easy to handle, hang and wire
n Barriered, sealable compartment for unmetered currentcarrying
parts
n
Al/Cu lay-in lugs, except two position 125A units
n Top or bottom feed
Removable KO Plate
Smaller,
more compact
design
enclosures
are lighter
and use
less space
n Bottom and rear branch wiring exits (Neutral and
ground at bottom only)
n ANSI #61 light gray electrodeposited paint on
G90 galvanized steel
n Field installable 5th jaw kit
Ring Style Uni-PAK 120/240V 1 Phase, 3 Wire
Maximum
Tenant
Main
125
225
Bus
Amperage
Meter
Positions
Per Pak
Catalog
Number
Breaker
Provision
Dimensions
5th Jaw
Assembly
200 2 WP2211 c Max. AIC Height Width Depth
Line Lugs Wire Range
26.26 13.80 5.81
#6-300 kcmil
300 3 WP3311 38.75
#2-600 kcmil
25.42
4 WP4411
QP, QPH,
47.75
1/0-750 kcmil CU-AL or (2)
400 5 WP4511 HQP, MP-T,
65,000 38.75 38.95
1/0-250 AL or (2) 1/0-3/0 CU
6 WP4611 MP-HT,
500 4 WP5411
MP-MT
47.75 26.47
5 WP6511
39.01
(2) #2-600 kcmil
600
38.75
6 WP6611 40.01
ECMF5
2 WP4212
29.75
7.56 6:00 or 9:00
1/0-750 kcmil CU-AL or (2)
400 3 WP4312 38.75 28.53
1/0-250 AL or (2) 1/0-3/0 CU
WP4412 QP, QPH,
4
HQP, MP-T,
47.75
WP6412 29.59
MP-HT,
600 5 WP6512
100,000
MP-MT, QS,
(2) #2-600 kcmil
46.22
WP6612 QSH, QSHH,
800 6 WP8612
HQS, HQSH
38.75
(2) 1/0-750 kcmil or (4) 1/0-
51.03
250 AL or (4) 1/0-3/0 CU
1000 WP10612 (3) #2-500 kcmil
Uni-PAK Alternate Lug Kits (WP ONLY) b
WPLK2400 400A Bus Lug Kit (2) #4-250
WPLK2600 600A Bus Lug Kit (3) #6-250
Replacement Factory Installed Lug Kits (WP & WEP Only)
ECMLK3225
300 KCMIL - For use in devices with 200A rated bus
(contains 1 lug assembly)
WPRLK600
600 KCMIL - For use in devices with 300A, 500A, 600A or
1000A rated bus (contains 1 lug assembly)
WPRLK750
750 KCMIL- For use in devices with 400A or 800A rated bus
(contains 1 lug assembly)
Dimensions shown are representative of outside box
dimensions and do not include allowances for mounting
bumps, endwalls, covers, hubs, or hardware protrusions.
Dimensions are subject to change.
b Designed for GA Power. Not limited thereto.
c Mounting Rails are not applicable for two position 125A
WP and WEP devices. These units are light enough to
be mounted using the back wall mounting dimples.
3-108
Siemens Industry, Inc. SPEEDFAX Product Catalog