Speedfax 2017

Power Mod
Revised on 06/30/19
Type BFT Main Feed Thru
BFT - Main Feed Thru Modules
The BFT is a main breaker module for the Power Mod group
metering line up that has the ability to isolate power to
side-mounted modules just like any other Power Mod main
breaker module, but also contains feed-through lugs that can
be used to supply and isolate power vertically to downstream
group metering line ups. This is a revolutionary product in
cabled riser applications.
3
METER
CENTERS
The breaker in the BFT protects both the horizontal bus as
well as the vertical cables leaving the top of the module. The
BFT can be used as the service entrance point and therefore
the neutral and ground is bonded in the unit. The neutral and
ground can be un-bonded for non-service entrance applications.
Features include:
n QuickSystem features
n Suitable for use as service entrance equipment
n Breaker protects power outgoing, vertically and horizontally
n 1200 amp meets EUSERC requirements
n Incoming and outgoing Power Mod thru bus
n Standard compression lug capability
n 65K AIC standard, 100K AIC available for all models
n Main breaker with broad ampacity ratings from 1200A
to 2000A
n Field installable shunt trip
n DAS Blue light models available in 1400-1600 amps"
n For 1200A DAS you must use a 1400A DAS module and
have the trip setting dialed down to 1200A.
Main Feed Thru Quick Reference
n 1200-2000A module rating (breaker)
n 1200-2000A feed-thru rating
n 1200A horizontal bus rating
n UL Standard #67
n UL file #E27100
n AIC rating (65K and 100K)
n Voltage: 240V AC max
n Available in single-phase and three-phase
n All swing latches and rivets are stainless steel
n NEMA 1 (indoor)
n G90 galvanized steel
n ANSI 61 paint
n All modules are bottom-feed only
n All modules have no hubs
n EUSERC drawing #347
3-30
Siemens Industry, Inc. SPEEDFAX Product Catalog