12.01.2021 Views

Speedfax 2017

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Power Mod<br />

Revised on 06/30/19<br />

Applications: Bus Duct Connections<br />

3<br />

METER<br />

CENTERS<br />

Busway application<br />

Siemens Power Mod offers an efficient and standardized<br />

means of connecting Sentron Busway to Power Mod<br />

utilizing the TapStack module. This module connects to a<br />

joint in the busway and converts the bus structure over to<br />

that of the Power Mod horizontal bus in only nine inches.<br />

TapStacks are configured, priced, built, and shipped<br />

with the Sentron Busway. They require an additional<br />

QuickConnect coupler and are for indoor use on end-feed<br />

applications. TapStacks can connect to any Power Mod<br />

horizontal bus.<br />

Options for the user are:<br />

1. Direct Connection: in this option (below) the connection<br />

is made directly to any meter stack family. This<br />

application is for use when the service disconnect is<br />

located at the beginning of the busway.<br />

2. Connection to a service disconnect: in this option a<br />

connection is made to either a WXB cross bus main<br />

or a WXS switch main. Please note that ANY other<br />

mains (WB, WEB, WS, WES) cannot act as a service<br />

disconnect for downstream meter stacks. The WB,<br />

WEB, WS, WES mains CAN be used as tenant mains<br />

on the load-side of a service disconnect for use in<br />

feeding large remote loads such as a CT cabinet. WXB<br />

mains are available up to 1200amps and WXS mains are<br />

available up to 800amps. Both families have 100K AIC<br />

options for all models.<br />

3. Connection to a load-side main: In applications where<br />

branch circuit monitoring is used in lieu of Power Mod a<br />

tap stack plus Power Mod main (WB, WS) can be used<br />

where the installer cables out of the main over to a<br />

distribution panel (Siemens P3, P4, and P5 panel types).<br />

This essentially replaces a bus plug function.<br />

For Center feed bus duct application please contact your<br />

Siemens representative.<br />

Critical and recommended dimensions for<br />

Sentron Busway to Power Mod connections<br />

Tap Stack Module<br />

Warning<br />

Do not connect the Power Mod NEMA 1 corner<br />

units (BE) directly to busway; always use a WELB in<br />

its place or use another module as an intermediary<br />

between the two.<br />

3-12<br />

Siemens Industry, Inc. SPEEDFAX Product Catalog

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!