Speedfax 2017

Power Mod
Revised on 06/30/19
Overview of Families
WSPD – Integral surge protection device for
multi-family applications
Surge protection modules for Power Mod (type WSPD)
are horizontal-bus connected modules that allow the
user to view surge status as well as access the SPD
control panel without breaking the utility seal on the
enclosure. An optional breaker disconnect is available to
enable the end user to replace the SPD (surge protection
device) without having to disconnect utility power to
the Power Mod installation.
Features include:
J 100,200,300,400,500kA ratings available
J External, vandal resistant and lockable clear cover
over SPD control panel
J Single phase horizontal bus and three phase
horizontal bus
J Optional breaker disconnect that opens phase and
neutral to make SPD replacement quick and easy
Surge Module
quick reference
J 100-500kA ratings
available
J 1200A horizontal
bus rating
J UL Standard #67
J UL file # E27100
J AIC rating: 100K
J Voltage
– Single phase 120/240V AC max
– Three Phase 240V AC max
J NEMA 3R rated
3 METER
CENTERS
WMK – K-Base Meter Stacks
Commercial K-Base Meter Stacks (type WMK) are
designed to meet the requirements of those utilities
specifying bolt-in meter sockets for 400 and 600 Amp
residential and commercial applications.
Features include:
J Exclusive Talon K4, K5, and K7 meter sockets
J 1 position K4, K5, K7 modules with 400 and 600
Amp tenant mains
J 2 position K7 module with 400 Amp
tenant main
J Space saving design
K-Base
quick reference
J 400A and 600A
1-2 positions
J 1200A horizontal
bus rating
J UL Standard # 67
J UL file # E27100
J AIC Rating (25k)
J Voltage
– Single Phase 120/240V AC Max
– Three In Single Phase Out
208Y/120V AC
– Three Phase 240V AC Max
J NEMA 3R rated
WMMB – auxillary pull boxes for use with WB, WTB,
and WS Power Mod modules
Auxillary pull boxes are used in cases where WEB, WES,
or WET modules were not or cannot be used, but the
user still needs to comply with the EUSERC standard.
These modules feature incoming NEMA 2-stud lug
mounting pattern lugs for underground feed and allow
the user to pull wire from the lug landing in the pull box
thru a 6” knockout and into: 400-1200amp WB, WTB
and 400-800amp WS modules. Note this family does
NOT have horizontal bus, it's intended only for lug in/lug
out applications.
Features include:
J 6” side opening (right or left) with available
gasket to help mitigate wire insulation damage
J EUSERC compliant incoming pull section
Pull Box
quick reference
J 400, 800,1200 Amp
J UL Standard #67
J UL file # E27100
J AIC rating: 100K
J Voltage
– Single phse 120/240V AC max
– Three Phase 240V AC max
J NEMA 3R rated
J No horizontal bus
Siemens Industry, Inc. SPEEDFAX Product Catalog 3-9