Speedfax 2017
Enclosed IEC Controls 3RE4 IEC Controllers Revised on 05/31/19 General information 3RE4 Enclosed IEC Controllers Product overview 3RE4 Enclosed IEC motor controllers are well suited for both industrial and commercial applications. They are durable and dependable, particularly when it comes to motor protection. Protecting the performance of motors is a critical priority and the 3RE4 enclosed starters are offered with either thermal or solid-state overload relays to maximize your motor protection. Soft Starter Control Controller Features General n UL motor horsepower rated n From fractional up to 60 Hp at 575 V n Non-combination type starters and contactors n Reversing and non-reversing controllers n Single phase and 3-phase loads n Thermal and solid-state overload relays n NEMA Type enclosures 1, 3/3R/4/12 and 4X 304 stainless steel n Standard size and extra larger enclosures n RoHS compliant n Standards: UL 60947-4-1 n Certifications: cULus Contactor n Horsepower rated per UL n High contact reliability n NO and NC auxiliary contacts included as standard n Permanently secured with screws on mounting panel n Screw type terminal connections 17 CONTROL PRODUCTS Overload Relay Features Thermal overload relays n Trip Class 10 n Phase failure sensitivity n UL for Single and three phase loads n Includes NC trip contact and NO alarm contact n Manual and automatic RESET (selectable) n Switch position indicator n TEST function n STOP button n Sealable cover (optional) n Screw-type terminals Solid-state overload relays n Selectable Trip Class 5, 10, 20 and 30 n Overload, phase failure and unbalance protection n Internal ground fault detection (selectable) n Internal power supply n Includes NC trip contact and NO alarm contact n Manual and automatic RESET (selectable) n Electrical remote RESET integrated n Switch position indicator n TEST function and self-monitoring n Sealable cover (optional) n Screw-type terminals Available Factory Mods, Field Kits, Accessories Factory modifications n Push buttons n Selector switches n Pilot lights n Control power transformers Field kits and accessories n Push buttons n Selector switches n Pilot lights n Auxiliary contacts n Control power transformers n Control relays and timers n Control circuit fuse block n Terminal blocks n etc. 17-176 Siemens Industry, Inc. SPEEDFAX Product Catalog
Enclosed IEC Controls 3RE4 IEC Controllers Catalog Numbering System 3RE4 Nomenclature Non-Combination Controllers Revised on 05/31/19 Catalog Numbering System 3RE4 1 2 2 – 3 A A 3 1 – 1 H Y 0 Controller Type 11 = Non-combination non-reversing starter,1-phase, 2-pole 12 = Non-combination non-reversing starter,3-phase, 3-pole 14 = Non-combination reversing starter, 3-phase, 3-pole 16 = Non-combination non-reversing contactor 18 = Non-combination reversing contactor Frame Size: UL60947-4-1 Hp Rating 15 = S00: 1-Ph Hp (0.25@115V, 0.5@208V, 0.75@230V), 3-Ph Hp (1.5@208V, 2@230V, 3@460V, 5@575V) 23 = S0: 1-Ph Hp (1@115V, 1@208V, 1@230V), 3-Ph Hp (2@208V, 3@230V, 5@460V, 7.5@575V) 24 = S0: 1-Ph Hp (1@115V, 2@208V, 2@230V), 3-Ph Hp (3@208V, 3@230V, 7.5@460V, 10@575V) 25 = S0: 1-Ph Hp (1@115V, 2@208V, 3@230V), 3-Ph Hp (5@208V, 5@230V, 10@460V, 15@575V) 26 = S0: 1-Ph Hp (2@115V, 3@208V, 3@230V), 3-Ph Hp (7.5@208V, 7.5@230V, 15@460V, 20@575V) 27 = S0: 1-Ph Hp (2@115V, 5@208V, 5@230V), 3-Ph Hp (10@208V, 10@230V, 20@460V, 25@575V) 28 = S0: 1-Ph Hp (3@115V, 5@208V, 5@230V), 3-Ph Hp (10@208V, 10@230V, 25@460V, 25@575V) 35 = S2: 1-Ph Hp (3@115V, 5@208V, 7.5@230V), 3-Ph Hp (10@208V, 15@230V, 30@460V, 40@575V) 36 = S2: 1-Ph Hp (3@115V, 7.5@208V, 10@230V), 3-Ph Hp (15@208V, 15@230V, 40@460V, 50@575V) 37 = S2: 1-Ph Hp (5@115V, 10@208V, 10@230V), 3-Ph Hp (20@208V, 20@230V, 50@460V, 50@575V) 38 = S2: 1-Ph Hp (5@115V, 10@208V, 15@230V), 3-Ph Hp (20@208V, 25@230V, 50@460V, 60@575V) Soft Starter Control Enclosure Type and Size A = NEMA Type 1 - standard size B = NEMA Type 1 - large size a C = NEMA Type 3/3R/4/12 - standard size E = NEMA Type 4X 304 SS - standard size Disconnect Type A = None Nominal Coil Voltage 1 = 24 V AC 50/60Hz 2 = 24 V DC 3 = 110/120 V AC 50/60Hz 4 = 208 V AC 50/60Hz 5 = 220/240 V AC 50/60Hz 6 = 277 V AC 60Hz 7 = 480 V AC 60Hz 8 = 600 V AC 60Hz 17 CONTROL PRODUCTS Overload Relay Type 0 = (none) 1 = Thermal fixed trip Class 10 5 = Solid-state selectable trip Class 5-10-20-30 Overload Relay Amp Range 0Y = No overload relay (contactor) See amp range selection on page 17-235. Special Y0 = (none) Factory modifications (See selection starting on page 17-238.) a Large size enclosures are not applicable for some configurations. Refer to product selection tables for specifics. Siemens Industry, Inc. SPEEDFAX Product Catalog 17-177
- Page 1153 and 1154: Replacement Parts Miscellaneous Sel
- Page 1155 and 1156: Manual Control Class SMF, MMS Dimen
- Page 1157 and 1158: Heavy Duty Motor Starters Solid Sta
- Page 1159 and 1160: Heavy Duty Contactors Class 40 Dime
- Page 1161 and 1162: Overload Relays & Current Transform
- Page 1163 and 1164: Lighting & Heating Contactors Open
- Page 1165 and 1166: GROUND 1/ L1 3/ L2 5/ L3 2/ T1 11 2
- Page 1167 and 1168: Lighting & Heating Contactors Mecha
- Page 1169 and 1170: Heavy Duty Motor Starters & Contact
- Page 1171 and 1172: Combination Heavy Duty Starters Enc
- Page 1173 and 1174: Reversing Heavy Duty Starters & Con
- Page 1175 and 1176: Combination Reversing Heavy Duty St
- Page 1177 and 1178: Combination Two Speed Heavy Duty St
- Page 1179 and 1180: Duplex Heavy Duty Controllers Class
- Page 1181 and 1182: Lighting Contactors Enclosed Contac
- Page 1183 and 1184: Manual Control Class 11 - 3RV, SMF,
- Page 1185 and 1186: Combination Heavy Duty Starters Cla
- Page 1187 and 1188: Combination Reversing Heavy Duty St
- Page 1189 and 1190: Two Speed Heavy Duty Starters Class
- Page 1191 and 1192: SEK SES SAW LMB SEK SES SAW LMB SEK
- Page 1193 and 1194: Reduced Voltage Starters & Pump Pan
- Page 1195 and 1196: Duplex Heavy Duty Controllers Class
- Page 1197 and 1198: Standard & Irrigation Pump Panels C
- Page 1199 and 1200: Duplex Heavy Duty Controllers Class
- Page 1201 and 1202: Lighting and Heating Contactors Mec
- Page 1203: 240V 230V 220V 480V 230V 460V 220V
- Page 1207 and 1208: Enclosed IEC Controls 3RE4 Non-Reve
- Page 1209 and 1210: Enclosed IEC Controls 3RE4 Non-Reve
- Page 1211 and 1212: Enclosed IEC Controls Selection Tab
- Page 1213 and 1214: Enclosed IEC Controls 3RE4 Factory
- Page 1215 and 1216: Enclosed IEC Controls 3RE4 Field Mo
- Page 1217 and 1218: Enclosed IEC Controls 3RE4 Outline
- Page 1219 and 1220: Enclosed IEC Controls 3RE4 Wiring D
- Page 1221 and 1222: Motor Starters, Soft Starters and L
- Page 1223 and 1224: For Operation in the Control Cabine
- Page 1225 and 1226: For Operation in the Control Cabine
- Page 1227 and 1228: For Operation in the Control Cabine
- Page 1229 and 1230: For Operation in the Control Cabine
- Page 1231 and 1232: Modules for RESET 1) Modules for re
- Page 1233 and 1234: For Operation in the Control Cabine
- Page 1235 and 1236: For Operation in the Control Cabine
- Page 1237 and 1238: For Operation in the Control Cabine
- Page 1239 and 1240: Planning and Configuration with SIR
- Page 1241 and 1242: Planning and Configuration with SIR
- Page 1243 and 1244: Planning and Configuration with SIR
- Page 1245 and 1246: For Operation in the Control Cabine
- Page 1247 and 1248: For Operation in the Control Cabine
- Page 1249 and 1250: For Operation in the Control Cabine
- Page 1251 and 1252: For Operation in the Control Cabine
- Page 1253 and 1254: Control Products Enclosed 3RW44 3RW
Enclosed IEC Controls<br />
3RE4 IEC Controllers<br />
Catalog Numbering System<br />
3RE4 Nomenclature<br />
Non-Combination Controllers<br />
Revised on 05/31/19<br />
Catalog Numbering System<br />
3RE4 1 2 2 – 3 A A 3 1 – 1 H Y 0<br />
Controller Type<br />
11 = Non-combination non-reversing starter,1-phase, 2-pole<br />
12 = Non-combination non-reversing starter,3-phase, 3-pole<br />
14 = Non-combination reversing starter, 3-phase, 3-pole<br />
16 = Non-combination non-reversing contactor<br />
18 = Non-combination reversing contactor<br />
Frame Size: UL60947-4-1 Hp Rating<br />
15 = S00: 1-Ph Hp (0.25@115V, 0.5@208V, 0.75@230V), 3-Ph Hp (1.5@208V, 2@230V, 3@460V, 5@575V)<br />
23 = S0: 1-Ph Hp (1@115V, 1@208V, 1@230V), 3-Ph Hp (2@208V, 3@230V, 5@460V, 7.5@575V)<br />
24 = S0: 1-Ph Hp (1@115V, 2@208V, 2@230V), 3-Ph Hp (3@208V, 3@230V, 7.5@460V, 10@575V)<br />
25 = S0: 1-Ph Hp (1@115V, 2@208V, 3@230V), 3-Ph Hp (5@208V, 5@230V, 10@460V, 15@575V)<br />
26 = S0: 1-Ph Hp (2@115V, 3@208V, 3@230V), 3-Ph Hp (7.5@208V, 7.5@230V, 15@460V, 20@575V)<br />
27 = S0: 1-Ph Hp (2@115V, 5@208V, 5@230V), 3-Ph Hp (10@208V, 10@230V, 20@460V, 25@575V)<br />
28 = S0: 1-Ph Hp (3@115V, 5@208V, 5@230V), 3-Ph Hp (10@208V, 10@230V, 25@460V, 25@575V)<br />
35 = S2: 1-Ph Hp (3@115V, 5@208V, 7.5@230V), 3-Ph Hp (10@208V, 15@230V, 30@460V, 40@575V)<br />
36 = S2: 1-Ph Hp (3@115V, 7.5@208V, 10@230V), 3-Ph Hp (15@208V, 15@230V, 40@460V, 50@575V)<br />
37 = S2: 1-Ph Hp (5@115V, 10@208V, 10@230V), 3-Ph Hp (20@208V, 20@230V, 50@460V, 50@575V)<br />
38 = S2: 1-Ph Hp (5@115V, 10@208V, 15@230V), 3-Ph Hp (20@208V, 25@230V, 50@460V, 60@575V)<br />
Soft Starter<br />
Control<br />
Enclosure Type and Size<br />
A = NEMA Type 1 - standard size<br />
B = NEMA Type 1 - large size a<br />
C = NEMA Type 3/3R/4/12 - standard size<br />
E = NEMA Type 4X 304 SS - standard size<br />
Disconnect Type<br />
A = None<br />
Nominal Coil Voltage<br />
1 = 24 V AC 50/60Hz<br />
2 = 24 V DC<br />
3 = 110/120 V AC 50/60Hz<br />
4 = 208 V AC 50/60Hz<br />
5 = 220/240 V AC 50/60Hz<br />
6 = 277 V AC 60Hz<br />
7 = 480 V AC 60Hz<br />
8 = 600 V AC 60Hz<br />
17 CONTROL<br />
PRODUCTS<br />
Overload Relay Type<br />
0 = (none)<br />
1 = Thermal fixed trip Class 10<br />
5 = Solid-state selectable trip Class 5-10-20-30<br />
Overload Relay Amp Range<br />
0Y = No overload relay (contactor)<br />
See amp range selection on page 17-235.<br />
Special<br />
Y0 = (none)<br />
Factory modifications (See selection starting on page 17-238.)<br />
a Large size enclosures are not applicable for some configurations.<br />
Refer to product selection tables for specifics.<br />
Siemens Industry, Inc. SPEEDFAX Product Catalog 17-177