Speedfax 2017

Heavy Duty Motor Starters & Contactors
Enclosed, Class 14, 40
Revised on 10/31/19
Dimensions
Figure 1 Figure 2 Figure 3 Figure 4 Figure 5
View is typical for bottom and top
Outline Dimensions Mounting
Conduit Size Approx.
Enclosure
Ship Reference
Type Size Fig. b A B C D E G a K1 K2 K3 K4 K5 Wt Lbs Drawing
00–1 3/4
1 11.00 6.41 5.00 8.22 4.63 0.25 0.5 0.5-0.75 0.75–1 — — 10 D68870
(w/o CPT)
1
(Standard
width for
use with
or without
CPT)
1
(Extra wide
for use with
CPT)
2–2 1/2
(w/o CPT)
2 13.53 8.00 6.38 10.25 6.00 0.25 0.5-0.75 0.75-1 1–1.25 — — 15 D68870
3–3 1/2 3 19.13 11.38 7.69 15.63 8.25 0.25 0.5-0.75 1–1.25 1.5–2 — — 26 D68870
4 4 24.88 13.38 8.13 21.75 9.00 0.25 0.5-0.75 1.25–1.5 2–2.5 — — 37 D68870
5 5 48.00 24.00 12.00 49.56 22.50 0.38 2–3 135
6, 7 5 48.00 24.00 12.00 49.56 22.50 0.38 2–2.5 150
8 5 60.00 38.00 16.00 61.56 36.50 0.38 275
00–2 1/2 3 19.13 11.38 7.69 15.63 8.25 0.25 0.5-0.75 1–1.25 1.5–2 — — 26 D68870
3–3 1/2 4 24.88 13.38 8.13 21.75 9.00 0.25 0.5-0.75 1.25–1.5 2–2.5 — — 37 D68870
NEMA & General
Purpose Control
17 CONTROL
PRODUCTS
Note: Dimensions are in inches.
a G designates mounting screw size.
b Enclosures shown in figures 1 - 4 have lift-off covers.
Enclosures shown in figure 5 have hinged covers.
Siemens Industry, Inc. SPEEDFAX Product Catalog 17-141