Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5<br />
Discontinued Products<br />
System Components<br />
Voltage converter module<br />
for SINUMERIK 840C<br />
Connecting the pushbutton module via the operator panel interface<br />
A voltage converter module UTS is required for connecting the<br />
pushbutton module (see page 5/31) to the SINUMERIK 840C<br />
controller. The voltage converter module is fitted to the rear of the<br />
pushbutton module with six spacer pins. The hardware is supplied<br />
with the module. This add-on assembly increases the overall<br />
height of the pushbutton module by 50 mm.<br />
5/32<br />
NC keyboard<br />
and softkeys<br />
Power<br />
supply<br />
unit<br />
6FX2 006 - 0AA00<br />
converter<br />
Technical specifications<br />
Operator panel<br />
interface<br />
Siemens NC Z · 2002/2003<br />
Slimline screen,<br />
monochrom or color<br />
6FX2 006 - 0AB00<br />
pushbutton module<br />
External supply 24 V DC (-23 % +25 %)<br />
Power dissipation<br />
Permissible ambient temperature<br />
15 VA<br />
• in operation 0 °C to +55 °C<br />
• in storage and transportation –40 °C to +70 °C<br />
Degree of protection IP 00<br />
Dimensions (W × H × D) 315 mm × 85 mm × 50 mm<br />
Ordering data Order No.<br />
Voltage converter module 6FX2 006 - 0AA00<br />
Connecting the pushbutton module via the keyboard interface<br />
Features<br />
• Matching of input/output signals of the keyboard interface to<br />
the signal level of the pushbutton module<br />
• Signal decoupling and isolation via optocouplers.<br />
The voltage converter module is connected to the pushbutton<br />
module and the keyboard interface via ribbon cable sets supplied<br />
with the module. When the slimline screen is used, the voltage<br />
converter module can be directly connected to the operator<br />
panel interface by means of the cable set provided. For connection<br />
to the keyboard interface, standard cable set 1 or 2 is needed.<br />
Suggested assembly<br />
Vertical softkeys<br />
Keyboard interface<br />
Keyboard interface<br />
Machine control panel<br />
Color<br />
CRTunit<br />
Horizonal softkeys<br />
NC keypad<br />
6FX2 006 - 0AA00<br />
converter<br />
PSU<br />
6FX2 006 - 0AB00<br />
pushbutton module<br />
PSU<br />
1 6 spacer pins, metal M2.5 x 15<br />
2 6 cylindrical cross-head screws M2.5 x 6<br />
3 12 plastic U washers M2.5<br />
Converter<br />
UTS 840C<br />
Soldering side<br />
Pushbutton<br />
module