Monkwood DIY Desk Plans BETA version
Here's an 'as is' DIY desk with supplies and dimensions and some instructions. Fill in the blanks creatively and or consult a woodworker to create your own until full version is released. My client building schedule has been very intense and I have less help in the shop these days due to COVID. I aim to keep chipping away at these plans for release3 in the new year. For those who would like to get started I have made these BETA plans available. Thanks for your patience and interest in this project! Sincerely, Monk Please tag you pics with #monkwoodDIYdesk
Here's an 'as is' DIY desk with supplies and dimensions and some instructions. Fill in the blanks creatively and or consult a woodworker to create your own until full version is released.
My client building schedule has been very intense and I have less help in the shop these days due to COVID. I aim to keep chipping away at these plans for release3 in the new year.
For those who would like to get started I have made these BETA plans available.
Thanks for your patience and interest in this project!
Sincerely,
Monk
Please tag you pics with #monkwoodDIYdesk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Model A // Materials & Supplies:<br />
This shopping list is based on readily available and cost effective construction materials. You are<br />
welcome to substitute certain items for others, such as hardwood tops instead of ply. However,<br />
you will need to adapt the plans to suite your material preferences.<br />
This list also includes additional pieces of wood for a possible mistake cuts and scrap wood to<br />
use for assembly and finish purposes. If using Kreg Jig or nail gun you’ll need to get the<br />
equivalent screws/nails needed.<br />
__________________________________________________________________________<br />
Wood//<br />
1 4 x 8 ft sheet 3/4” (18mm) plywood (construction or furniture grade)<br />
1 4 x 8 ft sheet of 3/4” (18mm) ply or insulation foam (for cutting assembly work top)<br />
3 2 x 6 - 8ft (245cm)<br />
3 2 x 4 - 10ft (305cm) - or 4 @ 8ft long<br />
3 1 x 2 - 8ft (245cm) fir, pine or poplar<br />
Building Supplies//<br />
Choose the driest and straightest pieces you can find!<br />
2 14” (356mm) or 16” metal drawer slides<br />
(Accuride 3832 or equivalent - regular not soft close or push!)<br />
4 A35z Simpson Strong Tie mounting brackets<br />
(or large door hinges)<br />
25 box of #6 - 2” (50mm) coarse drywall or wood screws<br />
25 box of #8 - 2.5” (64mm) coarse drywall or wood<br />
screws<br />
50 box of #8 - 5/8” (16mm) pan head screws<br />
25 box of 2” (50mm) finish nails<br />
1 small bottle of wood glue (ex: Titebond 2)<br />
Finish Supplies//<br />
3 sheets each of 80/120/220 grit sandpaper<br />
5 80 grit paper for sander<br />
1 quart (946ml) clear top coat finish<br />
(water based recommended on ply)<br />
1 quart (946ml) wood stain or paint<br />
1 beeswax and or orange oil<br />
4 felt pads for bases<br />
1 small wood filler<br />
1 plastic or fabric drop cloth