Manuel technique (pdf, 1.81 MB) - Niko
Manuel technique (pdf, 1.81 MB) - Niko
Manuel technique (pdf, 1.81 MB) - Niko
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
65-411<br />
In programming status, the ‘mode’ LEDs can indicate the following:<br />
LED status meaning<br />
Upper LED blinks.<br />
Lower LED blinks.<br />
Both LEDs blink.<br />
ε<br />
R,L,C<br />
Selection of: ‘manual reverse phase control’ (suitable<br />
for capacitive, resistive and mixed loads)<br />
Selection of: ‘manual phase control’ (suitable for inductive<br />
loads)<br />
Selection of: ‘automatic’<br />
To save the settings and exit the programming status: press the ‘programming’ key >2s.<br />
4. OPERATION<br />
A. Operation in the different modes<br />
Operation via DALI (S265411)<br />
When the dimmer is connected to the DALI bus and is activated, it can be controlled by every<br />
commando of the DALI controls on the bus. For programming and controlling the DALI systems, see<br />
the manuals of the DALI products. After a power cut (> 3s.), the dimmer will be switched off.<br />
Simple button control<br />
Operation input 1 (terminals 3 - 4):<br />
Input 1 has a simple push button control (S165411).<br />
EN<br />
100...1400VA<br />
100...1400VA<br />
100...1400VA<br />
100...1400VA<br />
100...1400VA<br />
100...1400VA<br />
100...1400W<br />
100...1400W<br />
100...1400W<br />
41