Cleco-2019-full-catalog-v3-links

Riveting
Ring Cutters
Easy removal of Rivet Rings 4.00 - 8.00mm
• Simple, rugged and handy, this tool has been designed to afford the
easy removal of rivet rings (Huck, LGP type or others) without risk of
damage to the hole or skin.
• Strong mechanical leverage enables clean removal of rings into two
half shells.
• Quick change levers enable the ring cutter to be used in either « in line
» or « right angle » position.
• Reduced dimension of the working part.
• No adjustment or setting required for use which is a considerable
time-saver for rivet ring removal.
• Removable, quick change anvils.
• Each tool is supplied with 1 set of anvils for one rivet ring diameter.
MODEL
FASTENER SIZE
60004000 4 MM | 0.1579 IN
60004017 4.16 MM | 0.1638 IN
60004001 4.8 MM | 0.188 IN
60004005 5 MM | 0.1969 IN
60004008 5.6 MM | 0.219 IN
60004010 6 MM | 0.2362 IN
60004016 6.35 MM | 0.250 IN
60004015 7.94 MM | 0.313 IN
Riveting
E & F Series - Rivet Hammer
Up to 1/4” Rivets
• For driving 1/8”-1/4” (3-6mm) rivets
• Standard beehive retainer
• Built-in air regulator controls power output
• Spool valve for precise speed control
MODEL
RETAINER TYPE
BORE
WEIGHT LENGTH AIR INLET SIZE
BLOWS PER MINUTE
IN LB IN IN
E4-2335 OPEN 0.50 1600 2.6 8.4 1/4
E4-2336 OPEN 0.50 1400 2.9 9.4 1/4
F4-PT-RT-B BEEHIVE SPRING 0.56 1700 3.31 8.7 1/4
All tools performance rated @ 90 psi / 620 kPa air pressure.Minimum Hose I.D.: 1/4 in / 6.4 mmStandard Equipment: Operating instructions & service manualE4-2335 and E5-2336 have minimum
order quantities
CLECOTOOLS.COM
301