Cleco-2019-full-catalog-v3-links

Hand Drilling, Countersinking & Spotfacing
RB106 - Flat Offset Angle Drill
Use in Pistol Drills for Difficult Access Applications
Hand Drilling, Countersinking & Spotfacing
• 10-32 thread for cutter attachment
• 6mm/0.236” Shank Diameter
• Recommended maximum drilling capacity 5mm/0.197” in Aluminium
• Recommended maximum countersinking capacity 10mm/0.394” in
Aluminium
MODEL A B
10080005 84 28 0.220 100
10080010 84 112.5 0.397 180
10080015 63 28 0.287 130
10080020 63 112.5 0.49 220
Cutters for Flat Offset Angle Drill
• These cutters are designed for use with the flat offset angle drill RB 106
with UNF 10-32 F spindle thread.
• Recommended for use with Dotco hand drills
• Can be used in aluminum
LB
WEIGHT
G
DRILL DIAMETER
CUTTER FLUTE LENGTH
MODEL
MM IN IN MM
33000020 2.5 0.098 0.472 12
33000625 2.5 0.098 0.79 20
33000025 3 0.118 0.472 12
33000132 3.2 0.126 0.315 8
33000030 3.2 0.126 0.472 12
33000632 3.2 0.126 0.79 20
33000040 4 0.157 0.472 12
33000240 4 0.157 0.59 15
33000248 4.8 0.189 0.59 15
276 CLECOTOOLS.COM