Cleco-2019-full-catalog-v3-links

Hand Drilling, Countersinking & Spotfacing
MP14 Series - Pistol Drill Reversible/Non-
Reversible
Industrial grade medium duty drills suitable for a wide range of
production and MRO applications
MP1457/1463 1.0hp / 0.75 kW
MP1458 1.2hp / 0.90kW
Hand Drilling, Countersinking & Spotfacing
• 2-step throttle for easy starting
• Built-in, no-clog mufflers for quiet operation
• Hardened and ground precision parts for extended service life
MODEL
TERMINATION
SPEED WEIGHT LENGTH
R/MIN LB IN
MP1457-51 3/8” CHUCK 2600 1.98 7.5
MP1458-55 1/2” CHUCK 1200 2.20 9.0
MP1463-51 3/8” CHUCK 1800 2.43 6.8
All tools performance rated @ 90psi / 620 kPa air pressure.
Air inlet size: 1/4in
Minimum Hose I.D.: 5/16in / 7.9mm
Drill Diameter Capacity Matches Chuck Size
15DP Series - Pistol Drill Non-Reversible
1.0hp / 0.75kW
160-1400rpm
Low speed for Ti/Hard Metals
• Powerful motor
• Excellent for slow speed applications
• 1/2” models equipped with dead handle
MODEL
TERMINATION
SPEED WEIGHT LENGTH
R/MIN LB IN
15DP-1.6B-53 1/2” CHUCK 160 6.0 9.8
15DP-4B-53 1/2” CHUCK 400 5.5 8.5
15DP-8B-53 1/2” CHUCK 800 5.5 8.5
15DP-14B-49 3/8” CHUCK 1400 4.41 8.3
All tools performance rated @ 90psi / 620 kPa air pressure.
Standard Equipment: Operating instructions and service manual Dead handles on all
models except 15DP-14B 3-Jaw Chuck and Key
General: Air Inlet: 3/8” NPTF, Minimum Hose Size: 3/8”, Spindle Thread: 1/2”-20,
Spindle Offset: Pistol Grip: 31/32”
Drill Diameter Capacity Matches Chuck Size
260 CLECOTOOLS.COM