Cleco-2019-full-catalog-v3-links

Specialty Tools
Vacuum Conversion Kits 12-27 series
Converts front exhaust to a one of the configurations shown below
• Refer to the Vacuum Ready 12-27 Models in the catalog
MODEL DESCRIPTION TOOL SERIES
2704 OPTION 1 - PORTA BAG 12-27
2705 OPTION 2 - FLOOR BAG 12-27
2729 OPTION 3 - VACUUM SYSTEM ADAPTER 12-27
To convert an existing Cleco Dotco front exhaust series 12-27 saw to Vacuum operation, order any of the conversion kits listed in the table. NOTE: When converting to vacuum, free speed of the
tool will be reduced 20%.
Vacuum Conversion Kits 12-42 series
Converts front exhaust to a one of the configurations shown below
Specialty Tools
• Refer to the Vacuum Ready 12-42 Models in the catalog
MODEL DESCRIPTION TOOL SERIES
4131 OPTION 1 - PORTA BAG 12-42
4132 OPTION 2 - FLOOR BAG 12-42
4133 OPTION 3 - VACUUM SYSTEM ADAPTER 12-42
To convert an existing Cleco Dotco front exhaust series 12-42 saw to Vacuum operation, order any of the conversion kits listed in the table. NOTE: When converting to vacuum, free speed of the
tool will be reduced 20%.
SC3A Series - Triple Scaler
Piston Type
• Piston Type
• For maximum material removal
• Heavy duty, rugged application
MODEL
BORE
STROKE
AIR INLET SIZE LENGTH WEIGHT AIR INLET SIZE
BLOWS PER MINUTE
IN IN IN IN LB IN
SC3A 0.88 0.81 5200 3/8 13.3 7.9 3/8
All tools performance rated @ 90psi / 620 kPa air pressure.
Minimum Hose I.D.: 3/8in / 9.6mm
Standard Equipment: Operating instructions & service manual
CLECOTOOLS.COM
231