Cleco-2019-full-catalog-v3-links

Air Motors
B4 Series - Air Motor - Axial Piston
Maximum Power 0.9 hp | 0.67 kw
• Maximum Power 0.9 hp | 0.67 kw
• Torque Range 4 - 232 ft. lbs. | 6.8 - 315 Nm
• Reversible
• Rear Exhaust
• Keyed Spindle
MODEL MOUNT SPINDLE TYPE
B4R317M
B4R322M
B4R320M
B4R318M
B4R319M
B4R321M
B4R323M
FACE MOUNTING
FACE MOUNTING
FACE MOUNTING
FACE MOUNTING
FACE MOUNTING
FACE MOUNTING
FACE MOUNTING
7/8 IN KEYED
SPINDLE
7/8 IN KEYED
SPINDLE
7/8 IN KEYED
SPINDLE
7/8 IN KEYED
SPINDLE
7/8 IN KEYED
SPINDLE
7/8 IN KEYED
SPINDLE
7/8 IN KEYED
SPINDLE
RPM AT FREE TORQUE
AIR CON-
WEIGHT
LENGTH HORSEPOWER
MAX HP SPEED STALL
GEAR
SUMPTION
RATIO
R/MIN R/MIN FT LB | NM LB KG IN | MM HP SCFM
46 90
79 150
232.0 |
315
136.0 |
184
2.1 0.95 46.4-1
2.1 0.95 27.2-1
154 300 70.0 | 95 2.1 0.95 13.9-1
270 525 40.0 | 54 2.1 0.95 8-1
525 1020 21.0 | 28 2.1 0.95 4.1-1
2150 4200 5.0 | 6.8 2.1 0.95 1-1
90 175 119.0 | 161 2.1 0.95 23.8-1
* All models assume overhung load located at 1.75” (44.45mm) from face of motor.
** These motors must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve.
General:
Air Inlet: 3/8” NPTF
Air consumption: 40 cfm (1.13 m3/min)
All tools performance rated @ 90psi (620 kPa) air pressure.
Optional Equipment:
Exhaust Muffler – Part 813485
Pendent Control Kits – See page 51
Lubricating Oil – Part 533485 (1 gallon)
Motor and Gear Lube – Part A123771 (1 pound)
**Please visit clecotools.com for dimensional diagrams and power curves.
15.21 |
386
15.21 |
386
15.21 |
386
13.19 |
335
13.19 |
335
13.19 |
335
15.21 |
386
CONTROL
0.9 39.9 REVERSIBLE
0.9 39.9 REVERSIBLE
0.9 39.9 REVERSIBLE
0.9 39.9 REVERSIBLE
0.9 39.9 REVERSIBLE
0.9 39.9 REVERSIBLE
0.9 39.9 REVERSIBLE
Air Motors
150 CLECOTOOLS.COM