Cleco-2019-full-catalog-v3-links
Air Motors60N Series - Air Motor - Rotary VaneMaximum Power 2.3 hp | 1.72 kw• Maximum Power 2.3 hp | 1.72 kw• Torque Range 50 - 120 ft. lbs. | 68 - 163 Nm• Non-Reversible• Side Exhaust• Keyed SpindleMODEL MOUNT SPINDLE TYPE60N196MFLANGE AND BASEMOUNTING1 1/8 IN KEYEDSPINDLE*All models assume overhung load located at 2.0” (50.80mm) from face of motor.General:Air Inlet: 1/2” NPTFAir consumption: 70 cfm (1.98 m3/min)All tools performance rated @ 90psi (620 kPa) air pressure.Standard Equipment:Air strainer intake fitting. Foot and flange type mount.Optional Equipment:Lubricating Oil – Part 533485 (1 gallon)**Please visit clecotools.com for dimensional diagrams and power curves.RPM AT FREE TORQUEAIR CON-WEIGHTLENGTH HORSEPOWERMAX HP SPEED STALLGEARSUMPTIONRATIOR/MIN R/MIN FT LB | NM LB KG IN | MM HP SCFM345 690 67.0 | 91 2.1 0.95 19-117.03 |433CONTROL2.3 70 NON-REVERSIBLE60R Series - Air Motor - Rotary VaneMaximum Power 1.9 hp | 1.42 kw• Maximum Power 1.9 hp | 1.42 kw• Torque Range 43 - 101 ft. lbs. | 58 - 137 Nm• Reversible• Side Exhaust• Keyed SpindleAir MotorsMODEL MOUNT SPINDLE TYPE60R201M60R204MFLANGE AND BASEMOUNTINGFLANGE AND BASEMOUNTING1 1/8 IN KEYEDSPINDLE1 1/8 IN KEYEDSPINDLE*All models assume overhung load located at 2.0” (50.80mm) from face of motor.General:Air Inlet: 1/2” NPTFAir consumption: 70 cfm (1.98 m3/min)All tools performance rated @ 90psi (620 kPa) air pressure.Standard Equipment:Air strainer intake fitting. Foot and flange type mount.Optional Equipment:Lubricating Oil – Part 533485 (1 gallon)**Please visit clecotools.com for dimensional diagrams and power curves.RPM AT FREE TORQUEAIR CON-WEIGHTLENGTH HORSEPOWERMAX HP SPEED STALLGEARSUMPTIONRATIOR/MIN R/MIN FT LB | NM LB KG IN | MM HP SCFM245 490 57.0 | 77 2.1 0.95 19-1135 270101.0 |1372.1 0.95 33.7-117.03 |43317.03 |433CONTROL1.9 70 REVERSIBLE1.9 70 REVERSIBLE144 CLECOTOOLS.COM
Air MotorsMR10 Series - Air Motor - Rotary VaneMaximum Power 1.0 hp | 0.75 kw• Maximum Power 1.0 hp | 0.75 kw• Torque Range 2.5 - 74 ft. lbs. | 3.4 - 100 Nm• Reversible• Side Exhaust• Keyed SpindleMODEL MOUNT SPINDLE TYPEMR10R097MFOOT MOUNTING5/8 IN KEYEDSPINDLE*Non-geared models assume overhung load located at 0.5” (12.70mm) from face of motor.Geared models assume overhung load located at 0.75” (19.05mm) from face of motor.General:Air Inlet: 3/8” NPTFAir consumption: 54 cfm (1.53 m3/min)All tools performance rated @ 90psi (620 kPa) air pressure.Standard Equipment:Air strainer intake fitting. Foot and flange type mount.Optional Equipment:Lubricating Oil – Part 533485 (1 gallon)**Please visit clecotools.com for dimensional diagrams and power curves.RPM AT FREE TORQUEAIR CON-WEIGHTLENGTH HORSEPOWERMAX HP SPEED STALLGEARSUMPTIONRATIOR/MIN R/MIN FT LB | NM LB KG IN | MM HP SCFMCONTROL8500 17000 2.5 | 3.4 2.1 0.95 1-1 6.75 | 171 1.0 54 REVERSIBLEAir MotorsCLECOTOOLS.COM145
- Page 93 and 94: Fixtured SpindlesConventional Spind
- Page 95 and 96: Fixtured SpindlesConventional Spind
- Page 97 and 98: Fixtured SpindlesConventional Spind
- Page 99 and 100: Fixtured SpindlesDGD Floating Adapt
- Page 101 and 102: Controllers & SoftwaremPro400GCD-P
- Page 103 and 104: Controllers & SoftwaremPro400GCD-M
- Page 105 and 106: Controllers & SoftwaremPRO400 Globa
- Page 107 and 108: Controllers & SoftwaremPro400SG Glo
- Page 109 and 110: Controllers & SoftwareAnybus Profin
- Page 111 and 112: Controllers & SoftwareStack Light W
- Page 113 and 114: Impact WrenchesMP Series - Impactin
- Page 115 and 116: Impact WrenchesCWM Metal Housing Se
- Page 117 and 118: Pulse ToolsH Series 4-120Nm Torque
- Page 119 and 120: Pulse ToolsC Series - High Torque P
- Page 121 and 122: Pulse ToolsPulse Tools - 7/16” Qu
- Page 123 and 124: Electric Torque WrenchesI-Wrench -
- Page 125 and 126: Electric Torque WrenchesI-Wrench -
- Page 127 and 128: Solutions are in our DNA •CLECOTO
- Page 129 and 130: Air MotorsAir Motor SelectionTo ass
- Page 131 and 132: Air Motors21 Series - Air Motor - R
- Page 133 and 134: Air Motors22 Series - Air Motor - R
- Page 135 and 136: Air MotorsPush Pull Sleeve ValveAva
- Page 137 and 138: Air Motors31MF Series - Air Motor -
- Page 139 and 140: Air Motors61MF Series - Air Motor -
- Page 141 and 142: Air MotorsC3N Series - Air Motor -
- Page 143: Air Motors41R Series - Air Motor -
- Page 147 and 148: Air MotorsMR50 Series - Air Motor -
- Page 149 and 150: Air MotorsA2 Series - Air Motor - A
- Page 151 and 152: Air MotorsA6 Series - Air Motor - A
- Page 153 and 154: Air MotorsMA2 Series - Air Motor -
- Page 155 and 156: Air MotorsMB Series - Air Motor - R
- Page 157 and 158: Air MotorsMODEL MOUNT SPINDLE TYPER
- Page 159 and 160: AccessoriesPL Series - Balancers 1.
- Page 161 and 162: AccessoriesBalance Arms - Spring -
- Page 163 and 164: Solutions are in our DNA •CLECOTO
- Page 165 and 166: Material RemovalSOLUTIONS ARE IN OU
- Page 167 and 168: Surface Preparation ToolsDesigned f
- Page 169 and 170: Grinders12R91 Series - Precision Gr
- Page 171 and 172: GrindersMP42 Series Pencil Grinders
- Page 173 and 174: Grinders12-05 Series - Precision Gr
- Page 175 and 176: Grinders12-20 Series - Die Grinder
- Page 177 and 178: Grinders236 Series - 200 Series Col
- Page 179 and 180: GrindersMP44 Series Die Grinder20,0
- Page 181 and 182: Grinders10-11 Series - Extended - D
- Page 183 and 184: Grinders25 Series - Grinder - Exten
- Page 185 and 186: Grinders10LF Series - Die Grinder -
- Page 187 and 188: Grinders12-23 Series - Die Grinder
- Page 189 and 190: Grinders236 Series - Heavy Duty Hea
- Page 191 and 192: Grinders216 Series - Grinder - Exte
- Page 193 and 194: Grinders236 Series - Grinder - Righ
Air Motors
MR10 Series - Air Motor - Rotary Vane
Maximum Power 1.0 hp | 0.75 kw
• Maximum Power 1.0 hp | 0.75 kw
• Torque Range 2.5 - 74 ft. lbs. | 3.4 - 100 Nm
• Reversible
• Side Exhaust
• Keyed Spindle
MODEL MOUNT SPINDLE TYPE
MR10R097M
FOOT MOUNTING
5/8 IN KEYED
SPINDLE
*Non-geared models assume overhung load located at 0.5” (12.70mm) from face of motor.
Geared models assume overhung load located at 0.75” (19.05mm) from face of motor.
General:
Air Inlet: 3/8” NPTF
Air consumption: 54 cfm (1.53 m3/min)
All tools performance rated @ 90psi (620 kPa) air pressure.
Standard Equipment:
Air strainer intake fitting. Foot and flange type mount.
Optional Equipment:
Lubricating Oil – Part 533485 (1 gallon)
**Please visit clecotools.com for dimensional diagrams and power curves.
RPM AT FREE TORQUE
AIR CON-
WEIGHT
LENGTH HORSEPOWER
MAX HP SPEED STALL
GEAR
SUMPTION
RATIO
R/MIN R/MIN FT LB | NM LB KG IN | MM HP SCFM
CONTROL
8500 17000 2.5 | 3.4 2.1 0.95 1-1 6.75 | 171 1.0 54 REVERSIBLE
Air Motors
CLECOTOOLS.COM
145
Change language