Cleco-2019-full-catalog-v3-links

Air Motors
22 Series - Air Motor - Rotary Vane -
Reversible
Maximum Power 0.7 hp | 0.52 kw
• Maximum Power 0.7 hp | 0.52 kw
• Torque Range 0.6 - 28.4 ft. lbs. | 0.81 - 38.48 Nm
• Reversible
• Side Exhaust
MODEL MOUNT SPINDLE TYPE
22M5070-50
22M5071-50
22M5072-50
FLANGE AND BASE
MOUNTING
FLANGE AND BASE
MOUNTING
FLANGE AND BASE
MOUNTING
22-5070-50 ROUND
22-5370-50 ROUND
22M5270-50
FLANGE AND BASE
MOUNTING
1/2 IN KEYED
SPINDLE
1/2 IN KEYED
SPINDLE
1/2 IN KEYED
SPINDLE
1/2 IN KEYED
SPINDLE
1/2 IN KEYED
SPINDLE
1/2 IN KEYED
SPINDLE
RPM AT FREE TORQUE
AIR CON-
WEIGHT
LENGTH HORSEPOWER
MAX HP SPEED STALL
GEAR
SUMPTION
RATIO
R/MIN R/MIN FT LB | NM LB KG IN | MM HP SCFM
165 330
250 500
350 700
165 330
28.4 |
38.48
19.6 |
26.56
13.5 |
18.29
28.4 |
38.48
CONTROL
2.1 0.95 50.4-1 7.88 | 200 0.7 29 REVERSIBLE
2.1 0.95 34.8-1 7.88 | 200 0.7 29 REVERSIBLE
2.1 0.95 24-1 7.88 | 200 0.7 29 REVERSIBLE
2.1 0.95 50.4-1 7.88 | 200 0.7 29 REVERSIBLE
1750 3500 2.8 | 3.79 2.1 0.95 4.9-1 6.16 | 156 0.7 29 REVERSIBLE
1200 2400 4.0 | 5.42 2.1 0.95 7.1-1 6.16 | 156 0.7 29 REVERSIBLE
Air Inlet: 1/4” NPT – Side and rear
Air consumption: 29 cfm (.82 m3/min)
All tools performance rated @ 90psi (620 kPa) air pressure.
*Optional Terminations:
Replace -50 in model number with the desired termination
when ordering.
-38 0”-1/4” Capacity Drill Chuck (5000 RPM or less)
-51 1/16”-3/8” Capacity Drill Chuck (5000 RPM or less)
-53 5/64”-1/2” Capacity Drill Chuck (5000 RPM or less)
-60 1/2”-20 Threaded Spindle
-01 Series 200 Collet Chuck (for milling and routing)
-62 Series “K” Collet Chuck (for milling and routing)
Standard Equipment:
Hex socket screw provided for closure of unused inlet. Flush fitting for lubrication of gears. Wrench for threaded spindle and collet chuck models. 1/4” collet included with series 200 & “K” collet
chuck.
Optional Equipment:
Any series 200 and “K” collet may be substituted at no additional cost.
**Please visit clecotools.com for dimensional diagrams and power curves.
Airline Filter & Lubricator
Mounts in Hose Line.
Air Motors
• One ounce reservoir good for average 8-hour shift.
MAX PRESSURE
AIR INLET SIZE
MODEL
DESCRIPTION
LB/IN² | BAR
IN
45-0201 LUBRICATOR 100 LB/IN² | 6.9 BAR 1/4
45-0301 LUBRICATOR 100 LB/IN² | 6.9 BAR 3/8
134 CLECOTOOLS.COM