Cleco-2019-full-catalog-v3-links
Air Motors21 Series - Air Motor - Rotary Vane - RearExhaustMaximum Power 0.3 hp | 0.22 kw• Maximum Power 0.3 hp | 0.22 kw• Torque Range 0.2 - 15.2 ft. lbs. | 0.27 - 20.6 Nm• Non-Reversible• Rear ExhaustMODEL MOUNT SPINDLE TYPE21M1041-4921M1340-49FLANGE AND BASEMOUNTINGFLANGE AND BASEMOUNTING21-1041-49 ROUND21-1340-49 ROUND21-1940-49 ROUND21M1540-49FLANGE AND BASEMOUNTING3/8 IN KEYEDSPINDLE3/8 IN KEYEDSPINDLE3/8 IN KEYEDSPINDLE3/8 IN KEYEDSPINDLE3/8 IN KEYEDSPINDLE3/8 IN KEYEDSPINDLERPM AT FREE TORQUEAIR CON-WEIGHTLENGTH HORSEPOWERMAX HP SPEED STALLGEARSUMPTIONRATIOR/MIN R/MIN FT LB | NM LB KG IN | MM HP SCFMCONTROL300 600 9.9 | 13.41 2.1 0.95 44.82-1 5.66 | 144 0.3 12 NON-REVERSIBLE1600 3200 1.8 | 2.44 2.1 0.95 8.3-1 4.34 | 110 0.3 12 NON-REVERSIBLE300 600 9.9 | 13.41 2.1 0.95 44.82-1 5.66 | 144 0.3 12 NON-REVERSIBLE1600 3200 1.8 | 2.44 2.1 0.95 8.3-1 4.34 | 110 0.3 12 NON-REVERSIBLE15000 30000 0.2 | 0.27 2.1 0.95 1-1 3 | 76.2 0.3 12 NON-REVERSIBLE2500 5000 1.2 | 1.63 2.1 0.95 5.4-1 4.34 | 110 0.3 12 NON-REVERSIBLEAir Inlet: 1/4” NPT – Side and rearAll tools performance rated @ 90psi (620 kPa) air pressure.*Optional Terminations:Replace -49 in model number with the desired termination when ordering.-38 0”-1/4” Capacity Drill Chuck (5000 RPM or less)-51 1/16”-3/8” Capacity Drill Chuck (5000 RPM or less)-40 3/8”-24 Threaded Spindle-01 Series 200 Collet Chuck (for milling and routing)-36 Series 300 Collet Chuck (for milling and routing)Standard Equipment:Hex socket screw provided for closure of unused inlet. Flush fitting for lubrication of gears. Wrench for threaded spindle and collet chuck models. 1/4” collet included with series 200 & 300 colletchuck.Optional Equipment:Any series 200 collet may be substituted at no additional cost. On series 300 collet chuck, collets 301, 302, and 303 are available at extra cost.**Please visit clecotools.com for dimensional diagrams and power curves.Air Motors130 CLECOTOOLS.COM
Air Motors21 Series - Air Motor - Rotary Vane - SideExhaustMaximum Power 0.3 hp | 0.22 kw• Maximum Power 0.3 hp | 0.22 kw• Torque Range 0.2 - 15.2 ft. lbs. | 0.27 - 20.6 Nm• Non-Reversible• Side ExhaustMODEL MOUNT SPINDLE TYPE21M1000-4921M1002-49FLANGE AND BASEMOUNTINGFLANGE AND BASEMOUNTINGRPM AT FREE TORQUEAIR CON-LENGTH HORSEPOWERMAX HP SPEED STALL GEARSUMPTIONRATIOR/MIN R/MIN FT LB | NM IN | MM HP SCFMCONTROL3/8 IN KEYED SPINDLE 190 380 15.2 | 20.6 68.9-1 5.66 | 144 0.3 12 NON-REVERSIBLE3/8 IN KEYED SPINDLE 450 900 6.4 | 8.67 29.1-1 5.66 | 144 0.3 12 NON-REVERSIBLE21-1900-49 ROUND 3/8 IN KEYED SPINDLE 15000 30000 0.2 | 0.27 1-1 3 | 76.2 0.3 12 NON-REVERSIBLE21M1300-49FLANGE AND BASEMOUNTING3/8 IN KEYED SPINDLE 1600 3200 1.8 | 2.44 8.3-1 4.34 | 110 0.3 12 NON-REVERSIBLEAir Inlet: 1/4” NPT – Side and rearAll tools performance rated @ 90psi (620 kPa) air pressure.*Optional Terminations:Replace -49 in model number with the desired termination when ordering.-38 0”-1/4” Capacity Drill Chuck (5000 RPM or less)-51 1/16”-3/8” Capacity Drill Chuck (5000 RPM or less)-40 3/8”-24 Threaded Spindle-01 Series 200 Collet Chuck (for milling and routing)-36 Series 300 Collet Chuck (for milling and routing)Standard Equipment:Hex socket screw provided for closure of unused inlet. Flush fitting for lubrication of gears. Wrench for threaded spindle and collet chuck models. 1/4” collet included with series 200 & 300 colletchuck.Optional Equipment:Any series 200 collet may be substituted at no additional cost. On series 300 collet chuck, collets 301, 302, and 303 are available at extra cost.**Please visit clecotools.com for dimensional diagrams and power curves.Air MotorsCLECOTOOLS.COM131
- Page 79 and 80: Fixtured SpindlesIntelligent Spindl
- Page 81 and 82: Fixtured SpindlesIntelligent Spindl
- Page 83 and 84: Fixtured SpindlesIntelligent Spindl
- Page 85 and 86: Fixtured SpindlesConventional Spind
- Page 87 and 88: Fixtured SpindlesConventional Spind
- Page 89 and 90: Fixtured SpindlesConventional Spind
- Page 91 and 92: Fixtured SpindlesConventional Spind
- Page 93 and 94: Fixtured SpindlesConventional Spind
- Page 95 and 96: Fixtured SpindlesConventional Spind
- Page 97 and 98: Fixtured SpindlesConventional Spind
- Page 99 and 100: Fixtured SpindlesDGD Floating Adapt
- Page 101 and 102: Controllers & SoftwaremPro400GCD-P
- Page 103 and 104: Controllers & SoftwaremPro400GCD-M
- Page 105 and 106: Controllers & SoftwaremPRO400 Globa
- Page 107 and 108: Controllers & SoftwaremPro400SG Glo
- Page 109 and 110: Controllers & SoftwareAnybus Profin
- Page 111 and 112: Controllers & SoftwareStack Light W
- Page 113 and 114: Impact WrenchesMP Series - Impactin
- Page 115 and 116: Impact WrenchesCWM Metal Housing Se
- Page 117 and 118: Pulse ToolsH Series 4-120Nm Torque
- Page 119 and 120: Pulse ToolsC Series - High Torque P
- Page 121 and 122: Pulse ToolsPulse Tools - 7/16” Qu
- Page 123 and 124: Electric Torque WrenchesI-Wrench -
- Page 125 and 126: Electric Torque WrenchesI-Wrench -
- Page 127 and 128: Solutions are in our DNA •CLECOTO
- Page 129: Air MotorsAir Motor SelectionTo ass
- Page 133 and 134: Air Motors22 Series - Air Motor - R
- Page 135 and 136: Air MotorsPush Pull Sleeve ValveAva
- Page 137 and 138: Air Motors31MF Series - Air Motor -
- Page 139 and 140: Air Motors61MF Series - Air Motor -
- Page 141 and 142: Air MotorsC3N Series - Air Motor -
- Page 143 and 144: Air Motors41R Series - Air Motor -
- Page 145 and 146: Air MotorsMR10 Series - Air Motor -
- Page 147 and 148: Air MotorsMR50 Series - Air Motor -
- Page 149 and 150: Air MotorsA2 Series - Air Motor - A
- Page 151 and 152: Air MotorsA6 Series - Air Motor - A
- Page 153 and 154: Air MotorsMA2 Series - Air Motor -
- Page 155 and 156: Air MotorsMB Series - Air Motor - R
- Page 157 and 158: Air MotorsMODEL MOUNT SPINDLE TYPER
- Page 159 and 160: AccessoriesPL Series - Balancers 1.
- Page 161 and 162: AccessoriesBalance Arms - Spring -
- Page 163 and 164: Solutions are in our DNA •CLECOTO
- Page 165 and 166: Material RemovalSOLUTIONS ARE IN OU
- Page 167 and 168: Surface Preparation ToolsDesigned f
- Page 169 and 170: Grinders12R91 Series - Precision Gr
- Page 171 and 172: GrindersMP42 Series Pencil Grinders
- Page 173 and 174: Grinders12-05 Series - Precision Gr
- Page 175 and 176: Grinders12-20 Series - Die Grinder
- Page 177 and 178: Grinders236 Series - 200 Series Col
- Page 179 and 180: GrindersMP44 Series Die Grinder20,0
Air Motors
21 Series - Air Motor - Rotary Vane - Side
Exhaust
Maximum Power 0.3 hp | 0.22 kw
• Maximum Power 0.3 hp | 0.22 kw
• Torque Range 0.2 - 15.2 ft. lbs. | 0.27 - 20.6 Nm
• Non-Reversible
• Side Exhaust
MODEL MOUNT SPINDLE TYPE
21M1000-49
21M1002-49
FLANGE AND BASE
MOUNTING
FLANGE AND BASE
MOUNTING
RPM AT FREE TORQUE
AIR CON-
LENGTH HORSEPOWER
MAX HP SPEED STALL GEAR
SUMPTION
RATIO
R/MIN R/MIN FT LB | NM IN | MM HP SCFM
CONTROL
3/8 IN KEYED SPINDLE 190 380 15.2 | 20.6 68.9-1 5.66 | 144 0.3 12 NON-REVERSIBLE
3/8 IN KEYED SPINDLE 450 900 6.4 | 8.67 29.1-1 5.66 | 144 0.3 12 NON-REVERSIBLE
21-1900-49 ROUND 3/8 IN KEYED SPINDLE 15000 30000 0.2 | 0.27 1-1 3 | 76.2 0.3 12 NON-REVERSIBLE
21M1300-49
FLANGE AND BASE
MOUNTING
3/8 IN KEYED SPINDLE 1600 3200 1.8 | 2.44 8.3-1 4.34 | 110 0.3 12 NON-REVERSIBLE
Air Inlet: 1/4” NPT – Side and rear
All tools performance rated @ 90psi (620 kPa) air pressure.
*Optional Terminations:
Replace -49 in model number with the desired termination when ordering.
-38 0”-1/4” Capacity Drill Chuck (5000 RPM or less)
-51 1/16”-3/8” Capacity Drill Chuck (5000 RPM or less)
-40 3/8”-24 Threaded Spindle
-01 Series 200 Collet Chuck (for milling and routing)
-36 Series 300 Collet Chuck (for milling and routing)
Standard Equipment:
Hex socket screw provided for closure of unused inlet. Flush fitting for lubrication of gears. Wrench for threaded spindle and collet chuck models. 1/4” collet included with series 200 & 300 collet
chuck.
Optional Equipment:
Any series 200 collet may be substituted at no additional cost. On series 300 collet chuck, collets 301, 302, and 303 are available at extra cost.
**Please visit clecotools.com for dimensional diagrams and power curves.
Air Motors
CLECOTOOLS.COM
131