Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Melters | 1-59
VersaBlue Plus Series Adhesive Melters
Models 25, 50, and 100 Liter
Specifications (contd.)
Item V50 V100
Configuration VB/VW VC/VX VD/VY VE/VZ VD/VY VE/VZ
Reservoir type
Release-coated grid and reservoir
Pump type
Spur gear pump with variable AC motor
Tank volume L (in 3 ) 50 (3051) 100 (6102)
Holding capacity kg (lb) 48.5 (107) 97 (213)
Pump rate kg/hr (lb/hr) (1)(2) 1.4–82.1 (3–181)
Filter type
Saturn ® basket-style filter
Melt rate kg/hr (lb/hr) 50 (110.2) 100 (220)
Throughput kg/hr (lb/hr) 75 (165.4) 150 (330)
Max. hydraulic pressure
85 bar/8.5 MPa (1230 psi)
Max. number of pumps
Up to 4 single stream OR 4 dual stream
Number of hose/applicator capacity 2, 4, 6, or 8
Maximum system power capacity:
2 hoses/applicators
4 hoses/applicators
6 hoses/applicators
8 hoses/applicators
Electrical service (3) 50/60 Hz (V)
Input/Output capability
TruFlow control
Closed-loop pattern control
Module response monitoring
External metering devices
Maximum pressure sensors (4)
Dimensions W x H x D mm (in.)
Installation dimensions W x H x D mm (in.)
15605 watts
19205 watts
22805 watts
26405 watts
3/PE AC 2005
3/PE AC 200–240
3/N/PE AC 380–415 Y
3/PE AC 4005
3/PE AC 4805
9 outputs/13 inputs
Up to 4 channels
Up to 8 channels
Up to 32 channels
Up to 4 combined internal & external controllers
8 internal
1100 x 1382 x 1035 (43.3 x 54.4 x 40.8)
2699 x 1788 x 1281 106.3 x 70.4 x 50.4)
20740 watts
27940 watts
31540 watts
35140 watts
Weight (5) , empty kg (lb) 290 (639) 360 (794)
Ambient temperature range
0 to 40 °C (32 to 104 °F)
Operating temperature range
40 to 230 °C (100 to 450 °F)
Temperature control stability
± 1 °C (2 °F)
Enclosure rating
IP54
Approvals
CE, UL
(1)
Actual rates will vary depending on adhesive type, application
parameters and input voltage.
(2)
Range given is for maximum pump rate of various pumps available.
(3)
Permitted deviation from rated line voltage is ±10%.
(4)
Up to 8 external sensors optional.
(5)
Weight depends on melter configuraton.
(6)
With integrated transformer, use 240V applicators and hoses.
Casters optional; PROFIBUS, PROFINET, ControlNet, and Ethernet I/P
optional.
PROFIBUS and PROFINET are registered trademarks of PROFIBUS &
PROFINET International. ControlNet and ControlLogix are registered
trademarks of Rockwell Automation., Inc.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com