Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

1-50 | Melters
DuraBlue L Series Adhesive Melters
DuraBlue 4L System Selection
DuraBlue 4L Systems have a pump rate of 22 kg/hr (48 lb/hr), operate at 600 psi hydraulic pressure, and process
adhesive with viscosity up to 10,000 cps. Filters are not used with these units. The table below shows the system
unit numbers according to available voltage and hose/applicator combination.
Description
120V 1Ø
60 Hz
200V 1Ø
50/60 Hz
240V 1Ø
50/60 Hz
L6 Hand-Held Applicator, Extrusion
L6 Hand-Held Applicator/Hose Assembly, 1.5 m (6 ft) — — 1030231
L6 Hand-Held Applicator/Hose Assembly, 3 m (10 ft) 1031137 — 1030230
AD-41 Hand-Held Applicator, Extrusion (DuraBraid hose)
AD-41 Hand-Held Applicator/Hp Hose Assembly, 2.4 m (8 ft), 1 mm (0.04 In.) 1030162 1031165 1030210
AD-41 Hand-Held Applicator/Hp Hose Assembly, 3.6 m (12 ft), 1 mm (0.04 In.) 1030163 1031166 1030211
AD-41 Hand-Held Applicator/Hp Hose Assembly, 4.8 m (16 ft), 1 mm (0.04 In.) 1030164 1031167 1030212
AD-41 Hand-Held Applicator, Swirl Adapter and Air Control Kit (DuraBraid hose)
AD-41 Hand-Held Applicator/Hp Hose Assembly, 2.4 m (8 ft), 1 mm (0.04 in.) wide
pattern CF
1030165 1031168 1030213
AD-41 Hand-Held Applicator/Hp Hose Assembly, 3.6 m (12 ft), 1 mm (0.04 In.)
Wide Pattern Cf
1030166 1031169 1030214
AD-41 Hand-Held Applicator/Hp Hose Assembly, 4.8 m (16 ft), 1 mm (0.04 in.)
wide pattern CF
1030167 1031170 1030215
AD-31 Hand-Held Applicator, Extrusion (DuraBraid hose)
AD-31 Hand-Held Applicator/Hp Hose Assembly, 2.4 m (8 ft),
1.5 mm (0.06 in.) extended
1040160 1044264 1044261
AD-31 Hand-Held Applicator/Hp Hose Assembly, 3.6 m (12 ft),
1.5 mm (0.06 in.) extended
1041161 1044265 1044262
AD-31 Hand-Held Applicator/Hp Hose Assembly, 4.8 m (16 ft),
1.5 mm (0.06 in.) extended
1040162 1044266 1044263
Non-Coated Tank, AD-31 Hand-Held Applicator, Extrusion (DuraBraid hose)
AD-31 Hand-Held Applicator/Hose Assembly, 2.4 m (8 ft),
1.5 mm (0.06 in.) extended
1042781 — —
AD-31 Hand-Held Applicator/Hose Assembly, 3.6 m (12 ft),
1.5 mm (0.06 in.) extended
1042782 — —
AD-31 Hand-Held Applicator/Hose Assembly, 4.8 m (16 ft),
1.5 mm (0.06 in.) extended
1042783 — —
NOTES:
All 120V DuraBlue 4 L Systems include a power cord.
All 200V and 240V systems include a power cord without a plug. Wire colors follow international standards.
Check total external wattage limitation before adding second hand-held applicator/hose assembly to DuraBlue 4L 120V units.
The pump rate listed is for 60 Hz power supply. The pump rate at 50 HZ is lower and equal to 83% of the value shown. Processing
adhesives with viscosities higher than the stated limit may reduce melter performance.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com