Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Melters | 1-49
DuraBlue L Series Adhesive Melters
Part Numbers
L Series
Melter
Model
Hose/
Applicator
Pump
Rate
kg/hr
(lb/hr) (1)
Maximum
Hydraulic
Pressure
bar/MPa (psi)
Viscosity
(cps)
4L (D4L) 2 22 (48) 75/7.5 (1100) <30,000
Filtered
120V 1Ø
60 Hz (2) 240V 1Ø
50/60 Hz (3)
PA (4) Viton PA (4) Viton
Filter 1069732 1031747 1069733 1031750
No Filter — — 1069734 —
10L (D10L) 2 22 (48) 75/7.5 (1100) <30,000 Filter — 1026752 1069735 1026754
10L (D10L) 2 50 (110) 41/4.1 (600) <10,000 No Filter — 1026753 1069736 1026755
16L (D16L) 2 35 (77) 75/7.5 (1100) <30,000 Filter — — 1069737 1031898
16L (D16L) 2 50 (110) 41/4.1 (600) <10,000 No Filter — 1026760 1069738 1026761
(1)
All pump rates are shown at 60 Hz power supply. Pump rates at 50 Hz are lower and equal to 83% of their listed value.
(2)
All 120V DuraBlue “L” melters include a power cord and U.S., style 20 amp plug.
(3)
All 200–240V DuraBlue “L“ melters include a power cord without a plug. Wiring color follow international standards.
(4)
Parts designated as “PA” are recommended for use in product assembly applications with operating temperatures greater than
191°C (375 °F). PA-type O-rings provide exceptionally high chemical and temperature resistance.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com