Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

1-48 | Melters
DuraBlue L Series Adhesive Melters
Specifications
Item DuraBlue 4L DuraBlue 10L DuraBlue 16L
Reservoir type
Pump type
Maximum pump rate per hour kg (lb) (1) 22 (48)
Tank
Gerotor
22 (48) 35 (77)
50 (110) 50 (110)
Melt rate kg/hr (2) 4.7 (10.3) 7.7 (17) 11.2 (24.7)
Throughput kg/hr (2) 6.3 (13.9) 12.5 (27.5) 20 (44)
Maximum hydraulic pressure (3)
Filter type (4)
75 bar/7.5 MPa (1100 psi)
Saturn ® basket-style filter
Holding capacity L (in. 3 ) 4 (244) 10 (610) 16 (973)
kg (lb) 3.9 (8.6) 9.7 (21.4) 15.5 (34.1)
Temperature range
Ambient temperature range
Temperature control stability
Electrical service (5)
40–230 °C (100–450 °F)
0–50 °C (32–122 °F)
±0.5 °C (1 °F)
120 VAC 1-phase 60 Hz
200–240 VAC 1-phase 50/60 Hz
Hose/Applicator capacity (maximum) 2
Hose/Applicator power 120V
500 W per channel 600 W per pair
1000 W per two pair (1 module)
Hose/Applicator power 240V
1000 W per channel 1200 W per pair
2000 W per two pair (1 module)
Maximum melter power
at 120 VAC
at 240 VAC
2400 W
3355 W
2400 W
3915 W
2400 W
4415 W
Weight (empty) 42 kg (92 lb) 76 kg (168 lb) 80 kg (175 lb)
Enclosure rating
IPX3
Dimensions W x H x D mm 334 x 478 x 552 441 x 649 x 620
(in.) (13.1 x 18.8 x 21.7) (17.4 x 25.5 x 24.4)
Approvals and certifications (6) CE, CUL, ISO 9001
(1)
Values shown for melter at 60 Hz.
(2)
Actual rates will vary depending on adhesive type, application parameters and input voltage.
(3)
Maximum pressure varies by unit.
(4)
Filter not available on all melters.
(5)
Permitted deviation from rated line voltage is ±10%.
(6)
Certifications are not universal to all melters. Contact Nordson for more information on specific units.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com